mdoc(7) police: markup nits.

sys/boot/common/loader.8

@@ -414,28 +414,36 @@ Limits the amount of KVM to be used to hold swap
 meta information, which directly governs the
 maximum amount of swap the system can support.
 This value is specified in bytes of KVA space
-and defaults to around 70MBytes.  Care should be taken 
+and defaults to around 70MBytes.
+Care should be taken
 to not reduce this value such that the actual
 amount of configured swap exceeds 1/2 the
-kernel-supported swap.  The default 70MB allows
+kernel-supported swap.
+The default 70MB allows
 the kernel to support a maximum of (approximately)
-14GB of configured swap.  Only mess around with
+14GB of configured swap.
+Only mess around with
 this parameter if you need to greatly extend the
 KVM reservation for other resources such as the
-buffer cache or NMBCLUSTERS.  Modifies
-.Va VM_SWZONE_SIZE_MAX
+buffer cache or
+.Va NMBCLUSTERS .
+Modifies
+.Va VM_SWZONE_SIZE_MAX .
 .It Va kern.maxbcache
 Limits the amount of KVM reserved for use by the
-buffer cache, specified in bytes.  The default
-maximum is 200MB.  This parameter is used to 
+buffer cache, specified in bytes.
+The default maximum is 200MB.
+This parameter is used to
 prevent the buffer cache from eating to much
 KVM in large-memory machine configurations.
 Only mess around with this parameter if you need to
 greatly extend the KVM reservation for other resources
-such as the swap zone or NMBCLUSTERS.  Note that
+such as the swap zone or
+.Va NMBCLUSTERS .
+Note that
 the NBUF parameter will override this limit.
 Modifies
-.Va VM_BCACHE_SIZE_MAX
+.Va VM_BCACHE_SIZE_MAX .
 .It Va machdep.pccard.pcic_irq
 Overrides the IRQ normally assigned to a PCCARD controller.
 Typically the first available interrupt will be allocated,