Add an ACPI PCI bus driver that is a subclass of the generic PCI bus
driver. This driver overrides the probe, attach, and read_ivar methods. If the parent bridge is an ACPI PCI bridge, then the probe routine will match, otherwise it will fail. It tests this by seeing if it can get the ACPI_HANDLE ivar from the bridge device. In the attach routine, it uses pci_add_children() to add all the child devices (but with a slightly larger ivar so it can store ACPI_HANDLE's for child devices) and then walks through the ACPI namespace below the bus device to cache ACPI_HANDLE's for all child devices present in the namespace. It does this by comparing the pci slot and function to the address encoded in _ADR of the devices in the ACPI namespace. The read_ivar routine passes most requests off to pci_read_ivar() and adds a new request so that the ACPI_HANDLE for a child device can be read. To add proper power support the power methods can be overridden as well, but that is not currently implemented. Also, there are cases where a device may show in the ACPI namespace as a PCI device that the PCI probe does not find. Currently such devices are ignored. Tested on: i386, ia64
This commit is contained in:
John Baldwin
parent
1976c29afb
commit
28bf1fad05
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=102445
235
sys/dev/acpica/acpi_pci.c
Normal file
235
sys/dev/acpica/acpi_pci.c
Normal file
@ -0,0 +1,235 @@
|
||||
/*
|
||||
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
|
||||
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
|
||||
* Copyright (c) 2000, BSDi
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice unmodified, this list of conditions, and the following
|
||||
* disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*
|
||||
*/
|
||||
|
||||
#include "opt_bus.h"
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/bus.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/malloc.h>
|
||||
#include <sys/module.h>
|
||||
|
||||
#include "acpi.h"
|
||||
|
||||
#include <dev/acpica/acpivar.h>
|
||||
|
||||
#include <sys/pciio.h>
|
||||
#include <dev/pci/pcireg.h>
|
||||
#include <dev/pci/pcivar.h>
|
||||
#include <dev/pci/pci_private.h>
|
||||
|
||||
#include "pcib_if.h"
|
||||
#include "pci_if.h"
|
||||
|
||||
/*
|
||||
* Hooks for the ACPI CA debugging infrastructure
|
||||
*/
|
||||
#define _COMPONENT ACPI_BUS
|
||||
ACPI_MODULE_NAME("PCI")
|
||||
|
||||
struct acpi_pci_devinfo {
|
||||
struct pci_devinfo ap_dinfo;
|
||||
ACPI_HANDLE ap_handle;
|
||||
};
|
||||
|
||||
static int acpi_pci_probe(device_t dev);
|
||||
static int acpi_pci_attach(device_t dev);
|
||||
static int acpi_pci_read_ivar(device_t dev, device_t child, int which,
|
||||
uintptr_t *result);
|
||||
#if 0
|
||||
static int acpi_pci_set_powerstate_method(device_t dev, device_t child,
|
||||
int state);
|
||||
static int acpi_pci_get_powerstate_method(device_t dev, device_t child);
|
||||
#endif
|
||||
static ACPI_STATUS acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level,
|
||||
void *context, void **status);
|
||||
|
||||
static device_method_t acpi_pci_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, acpi_pci_probe),
|
||||
DEVMETHOD(device_attach, acpi_pci_attach),
|
||||
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
||||
DEVMETHOD(device_suspend, bus_generic_suspend),
|
||||
DEVMETHOD(device_resume, bus_generic_resume),
|
||||
|
||||
/* Bus interface */
|
||||
DEVMETHOD(bus_print_child, pci_print_child),
|
||||
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
|
||||
DEVMETHOD(bus_read_ivar, acpi_pci_read_ivar),
|
||||
DEVMETHOD(bus_write_ivar, pci_write_ivar),
|
||||
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
||||
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
||||
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
||||
|
||||
DEVMETHOD(bus_get_resource_list,pci_get_resource_list),
|
||||
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
|
||||
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
|
||||
DEVMETHOD(bus_delete_resource, pci_delete_resource),
|
||||
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
|
||||
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
|
||||
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
||||
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
||||
|
||||
/* PCI interface */
|
||||
DEVMETHOD(pci_read_config, pci_read_config_method),
|
||||
DEVMETHOD(pci_write_config, pci_write_config_method),
|
||||
DEVMETHOD(pci_enable_busmaster, pci_enable_busmaster_method),
|
||||
DEVMETHOD(pci_disable_busmaster, pci_disable_busmaster_method),
|
||||
DEVMETHOD(pci_enable_io, pci_enable_io_method),
|
||||
DEVMETHOD(pci_disable_io, pci_disable_io_method),
|
||||
/* XXX: We should override these two. */
|
||||
DEVMETHOD(pci_get_powerstate, pci_get_powerstate_method),
|
||||
DEVMETHOD(pci_set_powerstate, pci_set_powerstate_method),
|
||||
|
||||
{ 0, 0 }
|
||||
};
|
||||
|
||||
static driver_t acpi_pci_driver = {
|
||||
"pci",
|
||||
acpi_pci_methods,
|
||||
0, /* no softc */
|
||||
};
|
||||
|
||||
DRIVER_MODULE(acpi_pci, pcib, acpi_pci_driver, pci_devclass, 0, 0);
|
||||
MODULE_VERSION(acpi_pci, 1);
|
||||
MODULE_DEPEND(acpi_pci, pci, 1, 1, 1);
|
||||
|
||||
static int
|
||||
acpi_pci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
||||
{
|
||||
struct acpi_pci_devinfo *dinfo;
|
||||
|
||||
switch (which) {
|
||||
case ACPI_IVAR_HANDLE:
|
||||
dinfo = device_get_ivars(child);
|
||||
*result = (uintptr_t)dinfo->ap_handle;
|
||||
return(0);
|
||||
}
|
||||
return(pci_read_ivar(dev, child, which, result));
|
||||
}
|
||||
|
||||
#if 0
|
||||
/*
|
||||
* PCI power manangement
|
||||
*/
|
||||
static int
|
||||
acpi_pci_set_powerstate_method(device_t dev, device_t child, int state)
|
||||
{
|
||||
/* XXX: TODO */
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
static int
|
||||
acpi_pci_get_powerstate_method(device_t dev, device_t child)
|
||||
{
|
||||
/* XXX: TODO */
|
||||
return (ENXIO);
|
||||
}
|
||||
#endif
|
||||
|
||||
static ACPI_STATUS
|
||||
acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level, void *context,
|
||||
void **status)
|
||||
{
|
||||
struct acpi_pci_devinfo *dinfo;
|
||||
device_t *devlist;
|
||||
int devcount, i, func, slot;
|
||||
UINT32 address;
|
||||
|
||||
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
|
||||
|
||||
if (ACPI_FAILURE(acpi_EvaluateInteger(handle, "_ADR", &address)))
|
||||
return_ACPI_STATUS(AE_OK);
|
||||
slot = address >> 16;
|
||||
func = address & 0xffff;
|
||||
if (device_get_children((device_t)context, &devlist, &devcount) != 0)
|
||||
return_ACPI_STATUS(AE_OK);
|
||||
for (i = 0; i < devcount; i++) {
|
||||
dinfo = device_get_ivars(devlist[i]);
|
||||
if (dinfo->ap_dinfo.cfg.func == func &&
|
||||
dinfo->ap_dinfo.cfg.slot == slot) {
|
||||
dinfo->ap_handle = handle;
|
||||
free(devlist, M_TEMP);
|
||||
return_ACPI_STATUS(AE_OK);
|
||||
}
|
||||
}
|
||||
free(devlist, M_TEMP);
|
||||
return_ACPI_STATUS(AE_OK);
|
||||
}
|
||||
|
||||
static int
|
||||
acpi_pci_probe(device_t dev)
|
||||
{
|
||||
|
||||
if (pcib_get_bus(dev) < 0)
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(dev, "ACPI PCI bus");
|
||||
|
||||
if (acpi_get_handle(dev) == NULL)
|
||||
return (ENXIO);
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
acpi_pci_attach(device_t dev)
|
||||
{
|
||||
int busno;
|
||||
|
||||
/*
|
||||
* Since there can be multiple independantly numbered PCI
|
||||
* busses on some large alpha systems, we can't use the unit
|
||||
* number to decide what bus we are probing. We ask the parent
|
||||
* pcib what our bus number is.
|
||||
*/
|
||||
busno = pcib_get_bus(dev);
|
||||
if (bootverbose)
|
||||
device_printf(dev, "physical bus=%d\n", busno);
|
||||
|
||||
/*
|
||||
* First, PCI devices are added as in the normal PCI bus driver.
|
||||
* Afterwards, the ACPI namespace under the bridge driver is
|
||||
* walked to save ACPI handles to all the devices that appear in
|
||||
* the ACPI namespace as immediate descendants of the bridge.
|
||||
*
|
||||
* XXX: Sometimes PCI devices show up in the ACPI namespace that
|
||||
* pci_add_children() doesn't find. We currently just ignore
|
||||
* these devices.
|
||||
*/
|
||||
pci_add_children(dev, busno, sizeof(struct acpi_pci_devinfo));
|
||||
|
||||
(void) AcpiWalkNamespace(ACPI_TYPE_DEVICE, acpi_get_handle(dev), 1,
|
||||
acpi_pci_save_handle, dev, NULL);
|
||||
|
||||
pci_load_vendor_data();
|
||||
return (bus_generic_attach(dev));
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user