Remove unused file. Replaced by tlb.c.

This commit is contained in:
Juli Mallett 2010-07-20 21:17:33 +00:00
parent bfa39fa09f
commit 32272e3b0a
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=210317

View File

@ -1,513 +0,0 @@
/* $OpenBSD: locore.S,v 1.18 1998/09/15 10:58:53 pefo Exp $ */
/*-
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Digital Equipment Corporation and Ralph Campbell.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Copyright (C) 1989 Digital Equipment Corporation.
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby granted,
* provided that the above copyright notice appears in all copies.
* Digital Equipment Corporation makes no representations about the
* suitability of this software for any purpose. It is provided "as is"
* without express or implied warranty.
*
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/loMem.s,
* v 1.1 89/07/11 17:55:04 nelson Exp SPRITE (DECWRL)
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAsm.s,
* v 9.2 90/01/29 18:00:39 shirriff Exp SPRITE (DECWRL)
* from: Header: /sprite/src/kernel/vm/ds3100.md/vmPmaxAsm.s,
* v 1.1 89/07/10 14:27:41 nelson Exp SPRITE (DECWRL)
*
* from: @(#)locore.s 8.5 (Berkeley) 1/4/94
* JNPR: tlb.S,v 1.1.4.2 2007/09/10 09:02:05 girish
* $FreeBSD$
*/
/*
* Contains code that is the first executed at boot time plus
* assembly language support routines.
*/
#include "opt_cputype.h"
#include <machine/asm.h>
#include <machine/cpu.h>
#include <machine/cpuregs.h>
#include <machine/regnum.h>
#include <machine/pte.h>
#include "assym.s"
#if defined(ISA_MIPS32)
#undef WITH_64BIT_CP0
#elif defined(ISA_MIPS64)
#define WITH_64BIT_CP0
#elif defined(ISA_MIPS3)
#define WITH_64BIT_CP0
#else
#error "Please write the code for this ISA"
#endif
#ifdef WITH_64BIT_CP0
#define _SLL dsll
#define _SRL dsrl
#define _MFC0 dmfc0
#define _MTC0 dmtc0
#define WIRED_SHIFT 34
#else
#define _SLL sll
#define _SRL srl
#define _MFC0 mfc0
#define _MTC0 mtc0
#define WIRED_SHIFT 2
#endif
.set noreorder # Noreorder is default style!
#if defined(ISA_MIPS32)
.set mips32
#elif defined(ISA_MIPS64)
.set mips64
#elif defined(ISA_MIPS3)
.set mips3
#endif
/*--------------------------------------------------------------------------
*
* Mips_TLBWriteIndexed(unsigned index, tlb *tlb);
*
* Write the given entry into the TLB at the given index.
*
* Results:
* None.
*
* Side effects:
* TLB entry set.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBWriteIndexed)
mfc0 v1, COP_0_STATUS_REG # Save the status register.
mtc0 zero, COP_0_STATUS_REG # Disable interrupts
ITLBNOPFIX
lw a2, 8(a1)
lw a3, 12(a1)
_MFC0 t0, COP_0_TLB_HI # Save the current PID.
_MTC0 a2, COP_0_TLB_LO0 # Set up entry low0.
_MTC0 a3, COP_0_TLB_LO1 # Set up entry low1.
lw a2, 0(a1)
lw a3, 4(a1)
mtc0 a0, COP_0_TLB_INDEX # Set the index.
_MTC0 a2, COP_0_TLB_PG_MASK # Set up entry mask.
_MTC0 a3, COP_0_TLB_HI # Set up entry high.
HAZARD_DELAY
tlbwi # Write the TLB
HAZARD_DELAY
_MTC0 t0, COP_0_TLB_HI # Restore the PID.
nop
_MTC0 zero, COP_0_TLB_PG_MASK # Default mask value.
mtc0 v1, COP_0_STATUS_REG # Restore the status register
ITLBNOPFIX
j ra
nop
END(Mips_TLBWriteIndexed)
/*--------------------------------------------------------------------------
*
* Mips_SetPID(int pid);
*
* Write the given pid into the TLB pid reg.
*
* Results:
* None.
*
* Side effects:
* PID set in the entry hi register.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_SetPID)
_MTC0 a0, COP_0_TLB_HI # Write the hi reg value
nop # required for QED5230
nop # required for QED5230
j ra
nop
END(Mips_SetPID)
/*--------------------------------------------------------------------------
*
* Mips_SetWIRED(int wired);
*
* Write the given value into the TLB wired reg.
*
* Results:
* None.
*
* Side effects:
* WIRED set in the wired register.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_SetWIRED)
mtc0 a0, COP_0_TLB_WIRED
j ra
nop
END(Mips_SetWIRED)
/*--------------------------------------------------------------------------
*
* Mips_GetWIRED(void);
*
* Get the value from the TLB wired reg.
*
* Results:
* Value of wired reg.
*
* Side effects:
* None.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_GetWIRED)
mfc0 v0, COP_0_TLB_WIRED
j ra
nop
END(Mips_GetWIRED)
/*--------------------------------------------------------------------------
*
* Mips_TLBFlush(tlbsize);
*
* Flush the "random" entries from the TLB.
* Uses "wired" register to determine what register to start with.
* Arg "tlbsize" is the number of entries to flush.
*
* Results:
* None.
*
* Side effects:
* The TLB is flushed.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBFlush)
mfc0 v1, COP_0_STATUS_REG # Save the status register.
mtc0 zero, COP_0_STATUS_REG # Disable interrupts
ITLBNOPFIX
mfc0 t1, COP_0_TLB_WIRED
_MFC0 t0, COP_0_TLB_HI # Save the PID
_MTC0 zero, COP_0_TLB_LO0 # Zero out low entry0.
_MTC0 zero, COP_0_TLB_LO1 # Zero out low entry1.
mtc0 zero, COP_0_TLB_PG_MASK # Zero out mask entry.
#
# Load invalid entry, each TLB entry should have it's own bogus
# address calculated by following expression:
# MIPS_KSEG0_START + 2 * i * PAGE_SIZE;
# One bogus value for every TLB entry might cause MCHECK exception
#
sll t3, t1, PAGE_SHIFT + 1
li v0, MIPS_KSEG0_START # invalid address
addu v0, t3
/*
* Align the starting value (t1) and the upper bound (a0).
*/
1:
mtc0 t1, COP_0_TLB_INDEX # Set the index register.
ITLBNOPFIX
_MTC0 v0, COP_0_TLB_HI # Mark entry high as invalid
addu t1, t1, 1 # Increment index.
addu v0, v0, 8 * 1024
HAZARD_DELAY
tlbwi # Write the TLB entry.
HAZARD_DELAY
bne t1, a0, 1b
nop
_MTC0 t0, COP_0_TLB_HI # Restore the PID
mtc0 v1, COP_0_STATUS_REG # Restore the status register
ITLBNOPFIX
j ra
nop
END(Mips_TLBFlush)
/*--------------------------------------------------------------------------
*
* Mips_TLBFlushAddr(unsigned TLBhi);
*
* Flush any TLB entries for the given address and TLB PID.
*
* Results:
* None.
*
* Side effects:
* The process's page is flushed from the TLB.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBFlushAddr)
mfc0 v1, COP_0_STATUS_REG # Save the status register.
mtc0 zero, COP_0_STATUS_REG # Disable interrupts
ITLBNOPFIX
li v0, (PTE_HVPN | PTE_ASID)
and a0, a0, v0 # Make shure valid hi value.
_MFC0 t0, COP_0_TLB_HI # Get current PID
mfc0 t3, COP_0_TLB_PG_MASK # Save current pgMask
_MTC0 a0, COP_0_TLB_HI # look for addr & PID
HAZARD_DELAY
tlbp # Probe for the entry.
HAZARD_DELAY
mfc0 v0, COP_0_TLB_INDEX # See what we got
li t1, MIPS_KSEG0_START
bltz v0, 1f # index < 0 => !found
nop
# Load invalid entry, each TLB entry should have it's own bogus
# address calculated by following expression:
# MIPS_KSEG0_START + 2 * i * PAGE_SIZE;
# One bogus value for every TLB entry might cause MCHECK exception
sll v0, PAGE_SHIFT + 1
addu t1, v0
_MTC0 t1, COP_0_TLB_HI # Mark entry high as invalid
_MTC0 zero, COP_0_TLB_LO0 # Zero out low entry.
_MTC0 zero, COP_0_TLB_LO1 # Zero out low entry.
HAZARD_DELAY
tlbwi
HAZARD_DELAY
1:
_MTC0 t0, COP_0_TLB_HI # restore PID
mtc0 t3, COP_0_TLB_PG_MASK # Restore pgMask
mtc0 v1, COP_0_STATUS_REG # Restore the status register
ITLBNOPFIX
j ra
nop
END(Mips_TLBFlushAddr)
/*--------------------------------------------------------------------------
*
* Mips_TLBUpdate(unsigned virpageadr, lowregx);
*
* Update the TLB if highreg is found; otherwise, enter the data.
*
* Results:
* < 0 if loaded >= 0 if updated.
*
* Side effects:
* None.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBUpdate)
mfc0 v1, COP_0_STATUS_REG # Save the status register.
mtc0 zero, COP_0_STATUS_REG # Disable interrupts
ITLBNOPFIX
and t1, a0, 0x1000 # t1 = Even/Odd flag
li v0, (PTE_HVPN | PTE_ASID)
and a0, a0, v0
_MFC0 t0, COP_0_TLB_HI # Save current PID
_MTC0 a0, COP_0_TLB_HI # Init high reg
and a2, a1, PTE_G # Copy global bit
HAZARD_DELAY
tlbp # Probe for the entry.
_SLL a1, a1, WIRED_SHIFT
_SRL a1, a1, WIRED_SHIFT
nop
mfc0 v0, COP_0_TLB_INDEX # See what we got
bne t1, zero, 2f # Decide even odd
# EVEN
nop
bltz v0, 1f # index < 0 => !found
HAZARD_DELAY
tlbr # update, read entry first
HAZARD_DELAY
_MTC0 a1, COP_0_TLB_LO0 # init low reg0.
HAZARD_DELAY
tlbwi # update slot found
b 4f
nop
1:
mtc0 zero, COP_0_TLB_PG_MASK # init mask.
_MTC0 a0, COP_0_TLB_HI # init high reg.
_MTC0 a1, COP_0_TLB_LO0 # init low reg0.
_MTC0 a2, COP_0_TLB_LO1 # init low reg1.
HAZARD_DELAY
tlbwr # enter into a random slot
HAZARD_DELAY
b 4f
nop
# ODD
2:
nop
bltz v0, 3f # index < 0 => !found
HAZARD_DELAY
tlbr # read the entry first
HAZARD_DELAY
_MTC0 a1, COP_0_TLB_LO1 # init low reg1.
HAZARD_DELAY
tlbwi # update slot found
HAZARD_DELAY
b 4f
nop
3:
mtc0 zero, COP_0_TLB_PG_MASK # init mask.
_MTC0 a0, COP_0_TLB_HI # init high reg.
_MTC0 a2, COP_0_TLB_LO0 # init low reg0.
_MTC0 a1, COP_0_TLB_LO1 # init low reg1.
HAZARD_DELAY
tlbwr # enter into a random slot
4: # Make shure pipeline
HAZARD_DELAY
_MTC0 t0, COP_0_TLB_HI # restore PID
mtc0 v1, COP_0_STATUS_REG # Restore the status register
ITLBNOPFIX
j ra
nop
END(Mips_TLBUpdate)
/*--------------------------------------------------------------------------
*
* Mips_TLBRead(unsigned entry, struct tlb *tlb);
*
* Read the TLB entry.
*
* Results:
* None.
*
* Side effects:
* tlb will contain the TLB entry found.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBRead)
mfc0 v1, COP_0_STATUS_REG # Save the status register.
mtc0 zero, COP_0_STATUS_REG # Disable interrupts
ITLBNOPFIX
_MFC0 t0, COP_0_TLB_HI # Get current PID
mtc0 a0, COP_0_TLB_INDEX # Set the index register
HAZARD_DELAY
tlbr # Read from the TLB
HAZARD_DELAY
mfc0 t2, COP_0_TLB_PG_MASK # fetch the hi entry
_MFC0 t3, COP_0_TLB_HI # fetch the hi entry
_MFC0 ta0, COP_0_TLB_LO0 # See what we got
_MFC0 ta1, COP_0_TLB_LO1 # See what we got
_MTC0 t0, COP_0_TLB_HI # restore PID
HAZARD_DELAY
mtc0 v1, COP_0_STATUS_REG # Restore the status register
ITLBNOPFIX
sw t2, 0(a1)
sw t3, 4(a1)
sw ta0, 8(a1)
j ra
sw ta1, 12(a1)
END(Mips_TLBRead)
/*--------------------------------------------------------------------------
*
* Mips_TLBGetPID(void);
*
* Results:
* Returns the current TLB pid reg.
*
* Side effects:
* None.
*
*--------------------------------------------------------------------------
*/
LEAF(Mips_TLBGetPID)
_MFC0 v0, COP_0_TLB_HI # get PID
j ra
and v0, v0, VMTLB_PID # mask off PID
END(Mips_TLBGetPID)
/*--------------------------------------------------------------------------
*
* void mips_TBIAP(int sizeofTLB);
*
* Invalidate TLB entries belong to per process user spaces while
* leaving entries for kernel space marked global intact.
*
*--------------------------------------------------------------------------
*/
LEAF(mips_TBIAP)
mfc0 v1, COP_0_STATUS_REG # save status register
mtc0 zero, COP_0_STATUS_REG # disable interrupts
_MFC0 ta0, COP_0_TLB_HI # Get current PID
move t2, a0
mfc0 t1, COP_0_TLB_WIRED
#
# Load invalid entry, each TLB entry should have it's own bogus
# address calculated by following expression:
# MIPS_KSEG0_START + 2 * i * PAGE_SIZE;
# One bogus value for every TLB entry might cause MCHECK exception
#
sll t3, t1, PAGE_SHIFT + 1
li v0, MIPS_KSEG0_START # invalid address
addu v0, t3
mfc0 t3, COP_0_TLB_PG_MASK # save current pgMask
# do {} while (t1 < t2)
1:
mtc0 t1, COP_0_TLB_INDEX # set index
HAZARD_DELAY
tlbr # obtain an entry
HAZARD_DELAY
_MFC0 a0, COP_0_TLB_LO1
and a0, a0, PTE_G # check to see it has G bit
bnez a0, 2f
nop
_MTC0 v0, COP_0_TLB_HI # make entryHi invalid
_MTC0 zero, COP_0_TLB_LO0 # zero out entryLo0
_MTC0 zero, COP_0_TLB_LO1 # zero out entryLo1
mtc0 zero, COP_0_TLB_PG_MASK # zero out mask entry
HAZARD_DELAY
tlbwi # invalidate the TLB entry
2:
addu t1, t1, 1
addu v0, 1 << (PAGE_SHIFT + 1)
bne t1, t2, 1b
nop
_MTC0 ta0, COP_0_TLB_HI # restore PID
mtc0 t3, COP_0_TLB_PG_MASK # restore pgMask
HAZARD_DELAY
mtc0 v1, COP_0_STATUS_REG # restore status register
j ra # new ASID will be set soon
nop
.set mips2
END(mips_TBIAP)