(this is an extract from src/share/examples/atm/README)
=================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
This commit is contained in:
parent
e2efbdd232
commit
3f8c45065e
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=39271
@ -1,5 +1,5 @@
|
|||||||
#
|
#
|
||||||
# $Id: Makefile.inc1,v 1.12 1998/09/10 00:27:57 obrien Exp $
|
# $Id: Makefile.inc1,v 1.13 1998/09/15 07:46:17 gibbs Exp $
|
||||||
#
|
#
|
||||||
# Make command line options:
|
# Make command line options:
|
||||||
# -DCLOBBER will remove /usr/include
|
# -DCLOBBER will remove /usr/include
|
||||||
@ -476,13 +476,13 @@ bootstrap:
|
|||||||
rm -f ${DESTDIR}/usr/src/sys
|
rm -f ${DESTDIR}/usr/src/sys
|
||||||
ln -s ${.CURDIR}/sys ${DESTDIR}/usr/src
|
ln -s ${.CURDIR}/sys ${DESTDIR}/usr/src
|
||||||
cd ${.CURDIR}/include; find -dx . | cpio -dump ${DESTDIR}/usr/include
|
cd ${.CURDIR}/include; find -dx . | cpio -dump ${DESTDIR}/usr/include
|
||||||
.for d in net netinet posix4 sys vm machine
|
.for d in net netatm netinet posix4 sys vm machine
|
||||||
if [ -h ${DESTDIR}/usr/include/$d ]; then \
|
if [ -h ${DESTDIR}/usr/include/$d ]; then \
|
||||||
rm -f ${DESTDIR}/usr/include/$d ; \
|
rm -f ${DESTDIR}/usr/include/$d ; \
|
||||||
fi
|
fi
|
||||||
.endfor
|
.endfor
|
||||||
cd ${.CURDIR}/sys; \
|
cd ${.CURDIR}/sys; \
|
||||||
find -dx net netinet posix4 sys vm -name '*.h' -o -type d | \
|
find -dx net netatm netinet posix4 sys vm -name '*.h' -o -type d | \
|
||||||
cpio -dump ${DESTDIR}/usr/include
|
cpio -dump ${DESTDIR}/usr/include
|
||||||
mkdir -p ${DESTDIR}/usr/include/machine
|
mkdir -p ${DESTDIR}/usr/include/machine
|
||||||
cd ${.CURDIR}/sys/${MACHINE_ARCH}/include; find -dx . -name '*.h' -o -type d | \
|
cd ${.CURDIR}/sys/${MACHINE_ARCH}/include; find -dx . -name '*.h' -o -type d | \
|
||||||
|
@ -1,4 +1,4 @@
|
|||||||
# $Id: BSD.include.dist,v 1.18 1998/09/14 08:34:45 obrien Exp $
|
# $Id: BSD.include.dist,v 1.19 1998/09/15 10:21:53 gibbs Exp $
|
||||||
#
|
#
|
||||||
|
|
||||||
/set type=dir uname=root gname=wheel mode=0755
|
/set type=dir uname=root gname=wheel mode=0755
|
||||||
@ -25,6 +25,8 @@
|
|||||||
..
|
..
|
||||||
netatalk
|
netatalk
|
||||||
..
|
..
|
||||||
|
netatm
|
||||||
|
..
|
||||||
netinet
|
netinet
|
||||||
..
|
..
|
||||||
netipx
|
netipx
|
||||||
|
@ -1,5 +1,5 @@
|
|||||||
# From: @(#)Makefile 8.2 (Berkeley) 1/4/94
|
# From: @(#)Makefile 8.2 (Berkeley) 1/4/94
|
||||||
# $Id: Makefile,v 1.82 1998/09/09 11:13:55 kato Exp $
|
# $Id: Makefile,v 1.83 1998/09/15 10:22:37 gibbs Exp $
|
||||||
#
|
#
|
||||||
# Doing a make install builds /usr/include
|
# Doing a make install builds /usr/include
|
||||||
#
|
#
|
||||||
@ -40,7 +40,7 @@ PFILES= mqueue.h sched.h semaphore.h \
|
|||||||
|
|
||||||
LFILES= errno.h fcntl.h poll.h syslog.h termios.h
|
LFILES= errno.h fcntl.h poll.h syslog.h termios.h
|
||||||
|
|
||||||
LDIRS= msdosfs net netns netatalk netinet netipx netkey nfs \
|
LDIRS= msdosfs net netns netatalk netatm netinet netipx netkey nfs \
|
||||||
pccard posix4 sys vm cam \
|
pccard posix4 sys vm cam \
|
||||||
# netccitt netiso
|
# netccitt netiso
|
||||||
|
|
||||||
|
@ -1,5 +1,5 @@
|
|||||||
# @(#)Makefile 8.1 (Berkeley) 6/4/93
|
# @(#)Makefile 8.1 (Berkeley) 6/4/93
|
||||||
# $Id: Makefile,v 1.77 1998/09/07 13:59:15 bde Exp $
|
# $Id: Makefile,v 1.78 1998/09/15 10:22:54 gibbs Exp $
|
||||||
|
|
||||||
# To satisfy shared library or ELF linkage when only the libraries being
|
# To satisfy shared library or ELF linkage when only the libraries being
|
||||||
# built are visible:
|
# built are visible:
|
||||||
@ -13,7 +13,7 @@
|
|||||||
# Otherwise, the SUBDIR list should be in alphabetical order.
|
# Otherwise, the SUBDIR list should be in alphabetical order.
|
||||||
|
|
||||||
SUBDIR= ${_csu} libcom_err ${_libcrypt} libmytinfo libtermcap \
|
SUBDIR= ${_csu} libcom_err ${_libcrypt} libmytinfo libtermcap \
|
||||||
${_compat} libalias libbind libc ${_libc_r} libcalendar libcam \
|
${_compat} libalias libatm libbind libc ${_libc_r} libcalendar libcam \
|
||||||
libcompat libcurses libdevstat ${_libdisk} libedit libf2c libfetch \
|
libcompat libcurses libdevstat ${_libdisk} libedit libf2c libfetch \
|
||||||
libftpio libgnumalloc libipx libkvm ${_libm} libmd libncurses libopie \
|
libftpio libgnumalloc libipx libkvm ${_libm} libmd libncurses libopie \
|
||||||
libpcap libresolv librpcsvc ${_libscsi} libskey libss libstand \
|
libpcap libresolv librpcsvc ${_libscsi} libskey libss libstand \
|
||||||
|
@ -28,6 +28,20 @@ specifically marked as [MERGED] features.
|
|||||||
|
|
||||||
KERNEL CHANGES:
|
KERNEL CHANGES:
|
||||||
|
|
||||||
|
o The Host ATM Research Platform ("HARP") software by Network
|
||||||
|
Computing Services, Inc. have been intergrated.
|
||||||
|
See /usr/src/share/examples/atm for more info.
|
||||||
|
|
||||||
|
o The code responsible for maintaining time of day have been
|
||||||
|
rewritten. New features are: true support for nanoseconds in
|
||||||
|
both kernel and userland, continuous rather than stepwise adjustment
|
||||||
|
by NTPD, support for synchronizing to high precision external time
|
||||||
|
signals.
|
||||||
|
|
||||||
|
o Support for the PPS API described in draft-mogul-pps-api-02.txt for
|
||||||
|
TTL rising edge inputs via the parallel printer port.
|
||||||
|
been added to the parallel printer
|
||||||
|
|
||||||
o The code from 4.4BSD-Lite2 has been (finally) merged.
|
o The code from 4.4BSD-Lite2 has been (finally) merged.
|
||||||
|
|
||||||
o The SMP (Symmetric MultiProcessing) branch has been merged.
|
o The SMP (Symmetric MultiProcessing) branch has been merged.
|
||||||
@ -467,8 +481,33 @@ Note that NO token ring cards are supported at this time as we're
|
|||||||
still waiting for someone to donate a driver for one of them. Any
|
still waiting for someone to donate a driver for one of them. Any
|
||||||
takers?
|
takers?
|
||||||
|
|
||||||
|
2.3 ATM
|
||||||
|
-------
|
||||||
|
|
||||||
2.3. Misc
|
o ATM Host Interfaces
|
||||||
|
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
|
||||||
|
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
|
||||||
|
|
||||||
|
o ATM Signalling Protocols
|
||||||
|
- The ATM Forum UNI 3.1 signalling protocol
|
||||||
|
- The ATM Forum UNI 3.0 signalling protocol
|
||||||
|
- The ATM Forum ILMI address registration
|
||||||
|
- FORE Systems's proprietary SPANS signalling protocol
|
||||||
|
- Permanent Virtual Channels (PVCs)
|
||||||
|
|
||||||
|
o IETF "Classical IP and ARP over ATM" model
|
||||||
|
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
|
||||||
|
- RFC 1577, "Classical IP and ARP over ATM"
|
||||||
|
- RFC 1626, "Default IP MTU for use over ATM AAL5"
|
||||||
|
- RFC 1755, "ATM Signaling Support for IP over ATM"
|
||||||
|
- RFC 2225, "Classical IP and ARP over ATM"
|
||||||
|
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
|
||||||
|
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
|
||||||
|
"A Distributed ATMARP Service Using SCSP"
|
||||||
|
|
||||||
|
o ATM Sockets interface
|
||||||
|
|
||||||
|
2.4. Misc
|
||||||
---------
|
---------
|
||||||
|
|
||||||
AST 4 port serial card using shared IRQ.
|
AST 4 port serial card using shared IRQ.
|
||||||
@ -517,10 +556,13 @@ GPIB and Transputer drivers.
|
|||||||
|
|
||||||
Genius and Mustek hand scanners.
|
Genius and Mustek hand scanners.
|
||||||
|
|
||||||
|
Xilinx XC6200 based reconfigurable hardware cards compatible with
|
||||||
|
the HOT1 from Virtual Computers (www.vcc.com)
|
||||||
|
|
||||||
|
Support for Dave Mills experimental Loran-C receiver.
|
||||||
|
|
||||||
FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
|
FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
|
||||||
|
|
||||||
|
|
||||||
3. Obtaining FreeBSD
|
3. Obtaining FreeBSD
|
||||||
--------------------
|
--------------------
|
||||||
|
|
||||||
|
@ -1,9 +1,10 @@
|
|||||||
# @(#)Makefile 8.5 (Berkeley) 3/31/94
|
# @(#)Makefile 8.5 (Berkeley) 3/31/94
|
||||||
# $Id: Makefile,v 1.54 1998/09/05 08:29:05 jb Exp $
|
# $Id: Makefile,v 1.55 1998/09/15 10:25:04 gibbs Exp $
|
||||||
|
|
||||||
# XXX MISSING: icheck ncheck
|
# XXX MISSING: icheck ncheck
|
||||||
|
|
||||||
SUBDIR= badsect \
|
SUBDIR= atm \
|
||||||
|
badsect \
|
||||||
camcontrol \
|
camcontrol \
|
||||||
ccdconfig \
|
ccdconfig \
|
||||||
clri \
|
clri \
|
||||||
|
@ -2,7 +2,7 @@
|
|||||||
# LINT -- config file for checking all the sources, tries to pull in
|
# LINT -- config file for checking all the sources, tries to pull in
|
||||||
# as much of the source tree as it can.
|
# as much of the source tree as it can.
|
||||||
#
|
#
|
||||||
# $Id: LINT,v 1.463 1998/09/14 19:56:38 sos Exp $
|
# $Id: LINT,v 1.464 1998/09/15 10:01:13 gibbs Exp $
|
||||||
#
|
#
|
||||||
# NB: You probably don't want to try running a kernel built from this
|
# NB: You probably don't want to try running a kernel built from this
|
||||||
# file. Instead, you should start from GENERIC, and add options from
|
# file. Instead, you should start from GENERIC, and add options from
|
||||||
@ -440,6 +440,36 @@ options IPFILTER_LOG #ipfilter logging
|
|||||||
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
||||||
options TCPDEBUG
|
options TCPDEBUG
|
||||||
|
|
||||||
|
#
|
||||||
|
# ATM (HARP version) options
|
||||||
|
#
|
||||||
|
# ATM_CORE includes the base ATM functionality code. This must be included
|
||||||
|
# for ATM support.
|
||||||
|
#
|
||||||
|
# ATM_IP includes support for running IP over ATM.
|
||||||
|
#
|
||||||
|
# At least one (and usually only one) of the following signalling managers
|
||||||
|
# must be included (note that all signalling managers include PVC support):
|
||||||
|
# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
|
||||||
|
# ATM_SPANS includes support for the `spans' signalling manager, which runs
|
||||||
|
# the FORE Systems's proprietary SPANS signalling protocol.
|
||||||
|
# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
|
||||||
|
# which run the ATM Forum UNI 3.x signalling protocols.
|
||||||
|
#
|
||||||
|
# The `hea' driver provides support for the Efficient Networks, Inc.
|
||||||
|
# ENI-155p ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
# The `hfa' driver provides support for the FORE Systems, Inc.
|
||||||
|
# PCA-200E ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
options ATM_CORE #core ATM protocol family
|
||||||
|
options ATM_IP #IP over ATM support
|
||||||
|
options ATM_SIGPVC #SIGPVC signalling manager
|
||||||
|
options ATM_SPANS #SPANS signalling manager
|
||||||
|
options ATM_UNI #UNI signalling manager
|
||||||
|
device hea0 #Efficient ENI-155p ATM PCI
|
||||||
|
device hfa0 #FORE PCA-200E ATM PCI
|
||||||
|
|
||||||
|
|
||||||
#####################################################################
|
#####################################################################
|
||||||
# FILESYSTEM OPTIONS
|
# FILESYSTEM OPTIONS
|
||||||
|
101
sys/conf/files
101
sys/conf/files
@ -99,6 +99,28 @@ dev/isp/isp.c optional isp device-driver
|
|||||||
#dev/dpt/dpt_control.c optional dpt device-driver
|
#dev/dpt/dpt_control.c optional dpt device-driver
|
||||||
dev/dpt/dpt_scsi.c optional dpt device-driver
|
dev/dpt/dpt_scsi.c optional dpt device-driver
|
||||||
dev/en/midway.c optional en device-driver
|
dev/en/midway.c optional en device-driver
|
||||||
|
dev/hea/eni.c optional hea device-driver
|
||||||
|
dev/hea/eni_buffer.c optional hea device-driver
|
||||||
|
dev/hea/eni_globals.c optional hea device-driver
|
||||||
|
dev/hea/eni_if.c optional hea device-driver
|
||||||
|
dev/hea/eni_init.c optional hea device-driver
|
||||||
|
dev/hea/eni_intr.c optional hea device-driver
|
||||||
|
dev/hea/eni_receive.c optional hea device-driver
|
||||||
|
dev/hea/eni_transmit.c optional hea device-driver
|
||||||
|
dev/hea/eni_vcm.c optional hea device-driver
|
||||||
|
dev/hfa/fore_buffer.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_command.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_globals.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_if.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_init.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_intr.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_load.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_output.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_receive.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_stats.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_timer.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_transmit.c optional hfa device-driver
|
||||||
|
dev/hfa/fore_vcm.c optional hfa device-driver
|
||||||
dev/pdq/pdq.c optional fea device-driver
|
dev/pdq/pdq.c optional fea device-driver
|
||||||
dev/pdq/pdq_ifsubr.c optional fea device-driver
|
dev/pdq/pdq_ifsubr.c optional fea device-driver
|
||||||
dev/pdq/pdq.c optional fpa device-driver
|
dev/pdq/pdq.c optional fpa device-driver
|
||||||
@ -327,6 +349,85 @@ netatalk/at_rmx.c optional netatalkdebug
|
|||||||
netatalk/ddp_input.c optional netatalk
|
netatalk/ddp_input.c optional netatalk
|
||||||
netatalk/ddp_output.c optional netatalk
|
netatalk/ddp_output.c optional netatalk
|
||||||
netatalk/ddp_usrreq.c optional netatalk
|
netatalk/ddp_usrreq.c optional netatalk
|
||||||
|
netatm/atm_aal5.c optional atm_core
|
||||||
|
netatm/atm_cm.c optional atm_core
|
||||||
|
netatm/atm_device.c optional atm_core
|
||||||
|
netatm/atm_if.c optional atm_core
|
||||||
|
netatm/atm_proto.c optional atm_core
|
||||||
|
netatm/atm_signal.c optional atm_core
|
||||||
|
netatm/atm_socket.c optional atm_core
|
||||||
|
netatm/atm_subr.c optional atm_core
|
||||||
|
netatm/atm_usrreq.c optional atm_core
|
||||||
|
netatm/ipatm/ipatm_event.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_if.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_input.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_load.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_output.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_usrreq.c optional atm_ip atm_core
|
||||||
|
netatm/ipatm/ipatm_vcm.c optional atm_ip atm_core
|
||||||
|
netatm/sigpvc/sigpvc_if.c optional atm_sigpvc atm_core
|
||||||
|
netatm/sigpvc/sigpvc_subr.c optional atm_sigpvc atm_core
|
||||||
|
netatm/spans/spans_arp.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_cls.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_if.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_kxdr.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_msg.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_print.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_proto.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_subr.c optional atm_spans atm_core
|
||||||
|
netatm/spans/spans_util.c optional atm_spans atm_core
|
||||||
|
spans_xdr.h optional atm_spans atm_core \
|
||||||
|
before-depend \
|
||||||
|
dependency "$S/netatm/spans/spans_xdr.x" \
|
||||||
|
compile-with "rpcgen -h -C $S/netatm/spans/spans_xdr.x > spans_xdr.h" \
|
||||||
|
clean "spans_xdr.h" \
|
||||||
|
no-obj no-implicit-rule
|
||||||
|
spans_xdr.c optional atm_spans atm_core \
|
||||||
|
before-depend \
|
||||||
|
dependency "$S/netatm/spans/spans_xdr.x" \
|
||||||
|
compile-with "rpcgen -c -C $S/netatm/spans/spans_xdr.x > spans_xdr.c" \
|
||||||
|
clean "spans_xdr.c" \
|
||||||
|
no-obj no-implicit-rule local
|
||||||
|
spans_xdr.o optional atm_spans atm_core \
|
||||||
|
dependency "$S/netatm/spans/spans_xdr.x" \
|
||||||
|
compile-with "${NORMAL_C}" \
|
||||||
|
no-implicit-rule local
|
||||||
|
netatm/uni/q2110_sigaa.c optional atm_uni atm_core
|
||||||
|
netatm/uni/q2110_sigcpcs.c optional atm_uni atm_core
|
||||||
|
netatm/uni/q2110_subr.c optional atm_uni atm_core
|
||||||
|
netatm/uni/qsaal1_sigaa.c optional atm_uni atm_core
|
||||||
|
netatm/uni/qsaal1_sigcpcs.c optional atm_uni atm_core
|
||||||
|
netatm/uni/qsaal1_subr.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscf_uni.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscf_uni_lower.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscf_uni_upper.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_lower.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_pdu.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_sigaa.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_sigcpcs.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_subr.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_timer.c optional atm_uni atm_core
|
||||||
|
netatm/uni/sscop_upper.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uni_load.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp_cache.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp_input.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp_output.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp_timer.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniarp_vcm.c optional atm_uni atm_core
|
||||||
|
netatm/uni/uniip.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_decode.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_encode.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_if.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_mbuf.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_msg.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_print.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_proto.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_sigmgr_state.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_subr.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_util.c optional atm_uni atm_core
|
||||||
|
netatm/uni/unisig_vc_state.c optional atm_uni atm_core
|
||||||
#netccitt/ccitt_proto.c optional ccitt
|
#netccitt/ccitt_proto.c optional ccitt
|
||||||
#netccitt/hd_debug.c optional hdlc
|
#netccitt/hd_debug.c optional hdlc
|
||||||
#netccitt/hd_input.c optional hdlc
|
#netccitt/hd_input.c optional hdlc
|
||||||
|
@ -1,4 +1,4 @@
|
|||||||
# $Id: options,v 1.96 1998/09/14 19:56:36 sos Exp $
|
# $Id: options,v 1.97 1998/09/15 09:59:15 gibbs Exp $
|
||||||
#
|
#
|
||||||
# On the handling of kernel options
|
# On the handling of kernel options
|
||||||
#
|
#
|
||||||
@ -203,6 +203,13 @@ IPFILTER opt_ipfilter.h
|
|||||||
IPFILTER_LOG opt_ipfilter.h
|
IPFILTER_LOG opt_ipfilter.h
|
||||||
IPFILTER_LKM opt_ipfilter.h
|
IPFILTER_LKM opt_ipfilter.h
|
||||||
|
|
||||||
|
# ATM (HARP version)
|
||||||
|
ATM_CORE opt_atm.h
|
||||||
|
ATM_IP opt_atm.h
|
||||||
|
ATM_SIGPVC opt_atm.h
|
||||||
|
ATM_SPANS opt_atm.h
|
||||||
|
ATM_UNI opt_atm.h
|
||||||
|
|
||||||
# XXX Conflict: # of devices vs network protocol (Native ATM).
|
# XXX Conflict: # of devices vs network protocol (Native ATM).
|
||||||
# This makes "atm.h" unusable.
|
# This makes "atm.h" unusable.
|
||||||
NATM opt_natm.h
|
NATM opt_natm.h
|
||||||
|
@ -2,7 +2,7 @@
|
|||||||
# LINT -- config file for checking all the sources, tries to pull in
|
# LINT -- config file for checking all the sources, tries to pull in
|
||||||
# as much of the source tree as it can.
|
# as much of the source tree as it can.
|
||||||
#
|
#
|
||||||
# $Id: LINT,v 1.463 1998/09/14 19:56:38 sos Exp $
|
# $Id: LINT,v 1.464 1998/09/15 10:01:13 gibbs Exp $
|
||||||
#
|
#
|
||||||
# NB: You probably don't want to try running a kernel built from this
|
# NB: You probably don't want to try running a kernel built from this
|
||||||
# file. Instead, you should start from GENERIC, and add options from
|
# file. Instead, you should start from GENERIC, and add options from
|
||||||
@ -440,6 +440,36 @@ options IPFILTER_LOG #ipfilter logging
|
|||||||
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
||||||
options TCPDEBUG
|
options TCPDEBUG
|
||||||
|
|
||||||
|
#
|
||||||
|
# ATM (HARP version) options
|
||||||
|
#
|
||||||
|
# ATM_CORE includes the base ATM functionality code. This must be included
|
||||||
|
# for ATM support.
|
||||||
|
#
|
||||||
|
# ATM_IP includes support for running IP over ATM.
|
||||||
|
#
|
||||||
|
# At least one (and usually only one) of the following signalling managers
|
||||||
|
# must be included (note that all signalling managers include PVC support):
|
||||||
|
# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
|
||||||
|
# ATM_SPANS includes support for the `spans' signalling manager, which runs
|
||||||
|
# the FORE Systems's proprietary SPANS signalling protocol.
|
||||||
|
# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
|
||||||
|
# which run the ATM Forum UNI 3.x signalling protocols.
|
||||||
|
#
|
||||||
|
# The `hea' driver provides support for the Efficient Networks, Inc.
|
||||||
|
# ENI-155p ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
# The `hfa' driver provides support for the FORE Systems, Inc.
|
||||||
|
# PCA-200E ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
options ATM_CORE #core ATM protocol family
|
||||||
|
options ATM_IP #IP over ATM support
|
||||||
|
options ATM_SIGPVC #SIGPVC signalling manager
|
||||||
|
options ATM_SPANS #SPANS signalling manager
|
||||||
|
options ATM_UNI #UNI signalling manager
|
||||||
|
device hea0 #Efficient ENI-155p ATM PCI
|
||||||
|
device hfa0 #FORE PCA-200E ATM PCI
|
||||||
|
|
||||||
|
|
||||||
#####################################################################
|
#####################################################################
|
||||||
# FILESYSTEM OPTIONS
|
# FILESYSTEM OPTIONS
|
||||||
|
@ -2,7 +2,7 @@
|
|||||||
# LINT -- config file for checking all the sources, tries to pull in
|
# LINT -- config file for checking all the sources, tries to pull in
|
||||||
# as much of the source tree as it can.
|
# as much of the source tree as it can.
|
||||||
#
|
#
|
||||||
# $Id: LINT,v 1.463 1998/09/14 19:56:38 sos Exp $
|
# $Id: LINT,v 1.464 1998/09/15 10:01:13 gibbs Exp $
|
||||||
#
|
#
|
||||||
# NB: You probably don't want to try running a kernel built from this
|
# NB: You probably don't want to try running a kernel built from this
|
||||||
# file. Instead, you should start from GENERIC, and add options from
|
# file. Instead, you should start from GENERIC, and add options from
|
||||||
@ -440,6 +440,36 @@ options IPFILTER_LOG #ipfilter logging
|
|||||||
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
#options IPFILTER_LKM #kernel support for ip_fil.o LKM
|
||||||
options TCPDEBUG
|
options TCPDEBUG
|
||||||
|
|
||||||
|
#
|
||||||
|
# ATM (HARP version) options
|
||||||
|
#
|
||||||
|
# ATM_CORE includes the base ATM functionality code. This must be included
|
||||||
|
# for ATM support.
|
||||||
|
#
|
||||||
|
# ATM_IP includes support for running IP over ATM.
|
||||||
|
#
|
||||||
|
# At least one (and usually only one) of the following signalling managers
|
||||||
|
# must be included (note that all signalling managers include PVC support):
|
||||||
|
# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
|
||||||
|
# ATM_SPANS includes support for the `spans' signalling manager, which runs
|
||||||
|
# the FORE Systems's proprietary SPANS signalling protocol.
|
||||||
|
# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
|
||||||
|
# which run the ATM Forum UNI 3.x signalling protocols.
|
||||||
|
#
|
||||||
|
# The `hea' driver provides support for the Efficient Networks, Inc.
|
||||||
|
# ENI-155p ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
# The `hfa' driver provides support for the FORE Systems, Inc.
|
||||||
|
# PCA-200E ATM PCI Adapter.
|
||||||
|
#
|
||||||
|
options ATM_CORE #core ATM protocol family
|
||||||
|
options ATM_IP #IP over ATM support
|
||||||
|
options ATM_SIGPVC #SIGPVC signalling manager
|
||||||
|
options ATM_SPANS #SPANS signalling manager
|
||||||
|
options ATM_UNI #UNI signalling manager
|
||||||
|
device hea0 #Efficient ENI-155p ATM PCI
|
||||||
|
device hfa0 #FORE PCA-200E ATM PCI
|
||||||
|
|
||||||
|
|
||||||
#####################################################################
|
#####################################################################
|
||||||
# FILESYSTEM OPTIONS
|
# FILESYSTEM OPTIONS
|
||||||
|
@ -31,7 +31,7 @@
|
|||||||
* SUCH DAMAGE.
|
* SUCH DAMAGE.
|
||||||
*
|
*
|
||||||
* @(#)mount.h 8.21 (Berkeley) 5/20/95
|
* @(#)mount.h 8.21 (Berkeley) 5/20/95
|
||||||
* $Id: mount.h,v 1.66 1998/09/05 15:17:34 bde Exp $
|
* $Id: mount.h,v 1.67 1998/09/07 13:17:05 bde Exp $
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef _SYS_MOUNT_H_
|
#ifndef _SYS_MOUNT_H_
|
||||||
@ -366,7 +366,7 @@ struct vfsops {
|
|||||||
#ifdef KERNEL
|
#ifdef KERNEL
|
||||||
#include <net/radix.h>
|
#include <net/radix.h>
|
||||||
|
|
||||||
#define AF_MAX 30 /* XXX */
|
#define AF_MAX 31 /* XXX */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Network address lookup element
|
* Network address lookup element
|
||||||
|
@ -31,7 +31,7 @@
|
|||||||
* SUCH DAMAGE.
|
* SUCH DAMAGE.
|
||||||
*
|
*
|
||||||
* @(#)socket.h 8.4 (Berkeley) 2/21/94
|
* @(#)socket.h 8.4 (Berkeley) 2/21/94
|
||||||
* $Id: socket.h,v 1.24 1998/02/01 22:44:16 alex Exp $
|
* $Id: socket.h,v 1.25 1998/09/12 21:14:25 wollman Exp $
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef _SYS_SOCKET_H_
|
#ifndef _SYS_SOCKET_H_
|
||||||
@ -127,8 +127,9 @@ struct linger {
|
|||||||
#define pseudo_AF_KEY 27 /* Internal key-management function */
|
#define pseudo_AF_KEY 27 /* Internal key-management function */
|
||||||
#define AF_INET6 28 /* IPv6 */
|
#define AF_INET6 28 /* IPv6 */
|
||||||
#define AF_NATM 29 /* native ATM access */
|
#define AF_NATM 29 /* native ATM access */
|
||||||
|
#define AF_ATM 30 /* ATM */
|
||||||
|
|
||||||
#define AF_MAX 30
|
#define AF_MAX 31
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Structure used by kernel to store most
|
* Structure used by kernel to store most
|
||||||
@ -185,6 +186,7 @@ struct sockproto {
|
|||||||
#define PF_KEY pseudo_AF_KEY
|
#define PF_KEY pseudo_AF_KEY
|
||||||
#define PF_INET6 AF_INET6
|
#define PF_INET6 AF_INET6
|
||||||
#define PF_NATM AF_NATM
|
#define PF_NATM AF_NATM
|
||||||
|
#define PF_ATM AF_ATM
|
||||||
|
|
||||||
#define PF_MAX AF_MAX
|
#define PF_MAX AF_MAX
|
||||||
|
|
||||||
|
@ -1,5 +1,5 @@
|
|||||||
# From: @(#)Makefile 5.20 (Berkeley) 6/12/93
|
# From: @(#)Makefile 5.20 (Berkeley) 6/12/93
|
||||||
# $Id: Makefile,v 1.128 1998/09/12 06:58:18 rnordier Exp $
|
# $Id: Makefile,v 1.129 1998/09/15 10:29:18 gibbs Exp $
|
||||||
|
|
||||||
# XXX MISSING: mkproto
|
# XXX MISSING: mkproto
|
||||||
SUBDIR= ac \
|
SUBDIR= ac \
|
||||||
@ -7,6 +7,7 @@ SUBDIR= ac \
|
|||||||
adduser \
|
adduser \
|
||||||
amd \
|
amd \
|
||||||
arp \
|
arp \
|
||||||
|
atm \
|
||||||
bootparamd \
|
bootparamd \
|
||||||
cdcontrol \
|
cdcontrol \
|
||||||
chkgrp \
|
chkgrp \
|
||||||
|
Loading…
Reference in New Issue
Block a user