[rpi] Add support for the second PWM channel
Add support for the second channel to bcm2835_pwm driver. Configurable parameters like mode, period, ratio are exposed as sysctls with postfix '2', e.g.: dev.pwm.N.mode2, dev.pwm.N.period2, dev.pwm.N.ratio2 Second channel can be enabled in DTB by configuring pwn-2chan overlay instead of pwm in config.txt. See [1] [1] https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README Submitted by: Bob Frazier Differential Revision: https://reviews.freebsd.org/D15769
This commit is contained in:
parent
5f88cf68fc
commit
3f9b72b641
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=335855
@ -63,11 +63,13 @@ struct bcm_pwm_softc {
|
|||||||
|
|
||||||
device_t clkman;
|
device_t clkman;
|
||||||
|
|
||||||
uint32_t freq;
|
uint32_t freq; /* shared between channels 1 and 2 */
|
||||||
uint32_t period;
|
uint32_t period; /* channel 1 */
|
||||||
uint32_t ratio;
|
uint32_t ratio;
|
||||||
uint32_t mode;
|
uint32_t mode;
|
||||||
|
uint32_t period2; /* channel 2 */
|
||||||
|
uint32_t ratio2;
|
||||||
|
uint32_t mode2;
|
||||||
};
|
};
|
||||||
|
|
||||||
#define BCM_PWM_MEM_WRITE(_sc, _off, _val) \
|
#define BCM_PWM_MEM_WRITE(_sc, _off, _val) \
|
||||||
@ -87,11 +89,15 @@ struct bcm_pwm_softc {
|
|||||||
#define R_RNG(_sc) BCM_PWM_MEM_READ(_sc, 0x10)
|
#define R_RNG(_sc) BCM_PWM_MEM_READ(_sc, 0x10)
|
||||||
#define W_DAT(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x14, _val)
|
#define W_DAT(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x14, _val)
|
||||||
#define R_DAT(_sc) BCM_PWM_MEM_READ(_sc, 0x14)
|
#define R_DAT(_sc) BCM_PWM_MEM_READ(_sc, 0x14)
|
||||||
|
#define W_RNG2(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x20, _val)
|
||||||
|
#define R_RNG2(_sc) BCM_PWM_MEM_READ(_sc, 0x20)
|
||||||
|
#define W_DAT2(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x24, _val)
|
||||||
|
#define R_DAT2(_sc) BCM_PWM_MEM_READ(_sc, 0x24)
|
||||||
|
|
||||||
static int
|
static int
|
||||||
bcm_pwm_reconf(struct bcm_pwm_softc *sc)
|
bcm_pwm_reconf(struct bcm_pwm_softc *sc)
|
||||||
{
|
{
|
||||||
uint32_t u;
|
uint32_t u, ctlr;
|
||||||
|
|
||||||
/* Disable PWM */
|
/* Disable PWM */
|
||||||
W_CTL(sc, 0);
|
W_CTL(sc, 0);
|
||||||
@ -99,25 +105,77 @@ bcm_pwm_reconf(struct bcm_pwm_softc *sc)
|
|||||||
/* Stop PWM clock */
|
/* Stop PWM clock */
|
||||||
(void)bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, 0);
|
(void)bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, 0);
|
||||||
|
|
||||||
if (sc->mode == 0)
|
ctlr = 0; /* pre-assign zero, enable bits, write to CTL at end */
|
||||||
return (0);
|
|
||||||
|
|
||||||
|
if (sc->mode == 0 && sc->mode2 == 0) /* both modes are zero */
|
||||||
|
return 0; /* device is now off - return */
|
||||||
|
|
||||||
|
/* set the PWM clock frequency */
|
||||||
|
/* TODO: should I only do this if it changes and not stop it first? */
|
||||||
u = bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, sc->freq);
|
u = bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, sc->freq);
|
||||||
if (u == 0)
|
if (u == 0)
|
||||||
return (EINVAL);
|
return (EINVAL);
|
||||||
sc->freq = u;
|
sc->freq = u;
|
||||||
|
|
||||||
/* Config PWM */
|
/* control register CTL bits:
|
||||||
W_RNG(sc, sc->period);
|
* (from BCM2835 ARM Peripherals manual, section 9.6)
|
||||||
if (sc->ratio > sc->period)
|
*
|
||||||
sc->ratio = sc->period;
|
* 15 MSEN2 chan 2 M/S enable; 0 for PWM algo, 1 for M/S transmission
|
||||||
W_DAT(sc, sc->ratio);
|
* 14 unused; always reads as 0
|
||||||
|
* 13 USEF2 chan 2 use FIFO (0 uses data; 1 uses FIFO)
|
||||||
|
* 12 POLA2 chan 2 invert polarity (0 normal, 1 inverted polarity)
|
||||||
|
* 11 SBIT2 chan 2 'Silence' bit (when not transmitting data)
|
||||||
|
* 10 RPTL2 chan 2 FIFO repeat last data (1 repeats, 0 interrupts)
|
||||||
|
* 9 MODE2 chan 2 PWM/Serializer mode (0 PWM, 1 Serializer)
|
||||||
|
* 8 PWEN2 chan 2 enable (0 disable, 1 enable)
|
||||||
|
* 7 MSEN1 chan 1 M/S enable; 0 for PWM algo, 1 for M/S transmission
|
||||||
|
* 6 CLRF1 chan 1 clear FIFO (set 1 to clear; always reads as 0)
|
||||||
|
* 5 USEF1 chan 1 use FIFO (0 uses data; 1 uses FIFO)
|
||||||
|
* 4 POLA1 chan 1 invert polarity (0 normal, 1 inverted polarity)
|
||||||
|
* 3 SBIT1 chan 1 'Silence' bit (when not transmitting data)
|
||||||
|
* 2 RTPL1 chan 1 FIFO repeat last data (1 repeats, 0 interrupts)
|
||||||
|
* 1 MODE1 chan 1 PWM/Serializer mode (0 PWM, 1 Serializer)
|
||||||
|
* 0 PWMEN1 chan 1 enable (0 disable, 1 enable)
|
||||||
|
*
|
||||||
|
* Notes on M/S enable: when this bit is '1', a simple M/S ratio is used. In short,
|
||||||
|
* the value of 'ratio' is the number of 'on' bits, and the total length of the data is
|
||||||
|
* defined by 'period'. So if 'ratio' is 2500 and 'period' is 10000, then the output
|
||||||
|
* remains 'on' for 2500 clocks, and goes 'off' for the remaining 7500 clocks.
|
||||||
|
* When the M/S enable is '0', a more complicated algorithm effectively 'dithers' the
|
||||||
|
* pulses in order to obtain the desired ratio. For details, see section 9.3 of the
|
||||||
|
* BCM2835 ARM Peripherals manual.
|
||||||
|
*/
|
||||||
|
|
||||||
/* Start PWM */
|
if (sc->mode != 0) {
|
||||||
if (sc->mode == 1)
|
/* Config PWM Channel 1 */
|
||||||
W_CTL(sc, 0x81);
|
W_RNG(sc, sc->period);
|
||||||
else
|
if (sc->ratio > sc->period)
|
||||||
W_CTL(sc, 0x1);
|
sc->ratio = sc->period;
|
||||||
|
W_DAT(sc, sc->ratio);
|
||||||
|
|
||||||
|
/* Start PWM Channel 1 */
|
||||||
|
if (sc->mode == 1)
|
||||||
|
ctlr |= 0x81; /* chan 1 enable + chan 1 M/S enable */
|
||||||
|
else
|
||||||
|
ctlr |= 0x1; /* chan 1 enable */
|
||||||
|
}
|
||||||
|
|
||||||
|
if (sc->mode2 != 0) {
|
||||||
|
/* Config PWM Channel 2 */
|
||||||
|
W_RNG2(sc, sc->period2);
|
||||||
|
if (sc->ratio2 > sc->period2)
|
||||||
|
sc->ratio2 = sc->period2;
|
||||||
|
W_DAT2(sc, sc->ratio2);
|
||||||
|
|
||||||
|
/* Start PWM Channel 2 */
|
||||||
|
if (sc->mode2 == 1)
|
||||||
|
ctlr |= 0x8100; /* chan 2 enable + chan 2 M/S enable */
|
||||||
|
else
|
||||||
|
ctlr |= 0x100; /* chan 2 enable */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* write CTL register with updated value */
|
||||||
|
W_CTL(sc, ctlr);
|
||||||
|
|
||||||
return (0);
|
return (0);
|
||||||
}
|
}
|
||||||
@ -138,7 +196,6 @@ bcm_pwm_pwm_freq_proc(SYSCTL_HANDLER_ARGS)
|
|||||||
return (error);
|
return (error);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
static int
|
static int
|
||||||
bcm_pwm_mode_proc(SYSCTL_HANDLER_ARGS)
|
bcm_pwm_mode_proc(SYSCTL_HANDLER_ARGS)
|
||||||
{
|
{
|
||||||
@ -203,7 +260,73 @@ bcm_pwm_ratio_proc(SYSCTL_HANDLER_ARGS)
|
|||||||
if (r > sc->period) // XXX >= ?
|
if (r > sc->period) // XXX >= ?
|
||||||
return (EINVAL);
|
return (EINVAL);
|
||||||
sc->ratio = r;
|
sc->ratio = r;
|
||||||
BCM_PWM_MEM_WRITE(sc, 0x14, sc->ratio);
|
W_DAT(sc, sc->ratio);
|
||||||
|
return (0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
bcm_pwm_pwm_freq2_proc(SYSCTL_HANDLER_ARGS)
|
||||||
|
{
|
||||||
|
struct bcm_pwm_softc *sc;
|
||||||
|
uint32_t r;
|
||||||
|
int error;
|
||||||
|
|
||||||
|
sc = (struct bcm_pwm_softc *)arg1;
|
||||||
|
if (sc->mode2 == 1)
|
||||||
|
r = sc->freq / sc->period2;
|
||||||
|
else
|
||||||
|
r = 0;
|
||||||
|
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
|
||||||
|
return (error);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
bcm_pwm_mode2_proc(SYSCTL_HANDLER_ARGS)
|
||||||
|
{
|
||||||
|
struct bcm_pwm_softc *sc;
|
||||||
|
uint32_t r;
|
||||||
|
int error;
|
||||||
|
|
||||||
|
sc = (struct bcm_pwm_softc *)arg1;
|
||||||
|
r = sc->mode2;
|
||||||
|
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
|
||||||
|
if (error != 0 || req->newptr == NULL)
|
||||||
|
return (error);
|
||||||
|
if (r > 2)
|
||||||
|
return (EINVAL);
|
||||||
|
sc->mode2 = r;
|
||||||
|
return (bcm_pwm_reconf(sc));
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
bcm_pwm_period2_proc(SYSCTL_HANDLER_ARGS)
|
||||||
|
{
|
||||||
|
struct bcm_pwm_softc *sc;
|
||||||
|
int error;
|
||||||
|
|
||||||
|
sc = (struct bcm_pwm_softc *)arg1;
|
||||||
|
error = sysctl_handle_int(oidp, &sc->period2, sizeof(sc->period2), req);
|
||||||
|
if (error != 0 || req->newptr == NULL)
|
||||||
|
return (error);
|
||||||
|
return (bcm_pwm_reconf(sc));
|
||||||
|
}
|
||||||
|
|
||||||
|
static int
|
||||||
|
bcm_pwm_ratio2_proc(SYSCTL_HANDLER_ARGS)
|
||||||
|
{
|
||||||
|
struct bcm_pwm_softc *sc;
|
||||||
|
uint32_t r;
|
||||||
|
int error;
|
||||||
|
|
||||||
|
sc = (struct bcm_pwm_softc *)arg1;
|
||||||
|
r = sc->ratio2;
|
||||||
|
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
|
||||||
|
if (error != 0 || req->newptr == NULL)
|
||||||
|
return (error);
|
||||||
|
if (r > sc->period2) // XXX >= ?
|
||||||
|
return (EINVAL);
|
||||||
|
sc->ratio2 = r;
|
||||||
|
W_DAT(sc, sc->ratio2);
|
||||||
return (0);
|
return (0);
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -257,19 +380,31 @@ bcm_pwm_sysctl_init(struct bcm_pwm_softc *sc)
|
|||||||
|
|
||||||
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "pwm_freq",
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "pwm_freq",
|
||||||
CTLFLAG_RD | CTLTYPE_UINT, sc, 0,
|
CTLFLAG_RD | CTLTYPE_UINT, sc, 0,
|
||||||
bcm_pwm_pwm_freq_proc, "IU", "PWM frequency (Hz)");
|
bcm_pwm_pwm_freq_proc, "IU", "PWM frequency ch 1 (Hz)");
|
||||||
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "period",
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "period",
|
||||||
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
bcm_pwm_period_proc, "IU", "PWM period (#clocks)");
|
bcm_pwm_period_proc, "IU", "PWM period ch 1 (#clocks)");
|
||||||
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "ratio",
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "ratio",
|
||||||
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
bcm_pwm_ratio_proc, "IU", "PWM ratio (0...period)");
|
bcm_pwm_ratio_proc, "IU", "PWM ratio ch 1 (0...period)");
|
||||||
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "freq",
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "freq",
|
||||||
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
bcm_pwm_freq_proc, "IU", "PWM clock (Hz)");
|
bcm_pwm_freq_proc, "IU", "PWM clock (Hz)");
|
||||||
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "mode",
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "mode",
|
||||||
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
bcm_pwm_mode_proc, "IU", "PWM mode (0=off, 1=pwm, 2=dither)");
|
bcm_pwm_mode_proc, "IU", "PWM mode ch 1 (0=off, 1=pwm, 2=dither)");
|
||||||
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "pwm_freq2",
|
||||||
|
CTLFLAG_RD | CTLTYPE_UINT, sc, 0,
|
||||||
|
bcm_pwm_pwm_freq2_proc, "IU", "PWM frequency ch 2 (Hz)");
|
||||||
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "period2",
|
||||||
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
|
bcm_pwm_period2_proc, "IU", "PWM period ch 2 (#clocks)");
|
||||||
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "ratio2",
|
||||||
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
|
bcm_pwm_ratio2_proc, "IU", "PWM ratio ch 2 (0...period)");
|
||||||
|
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "mode2",
|
||||||
|
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
|
||||||
|
bcm_pwm_mode2_proc, "IU", "PWM mode ch 2 (0=off, 1=pwm, 2=dither)");
|
||||||
}
|
}
|
||||||
|
|
||||||
static int
|
static int
|
||||||
@ -321,10 +456,11 @@ bcm_pwm_attach(device_t dev)
|
|||||||
/* Add sysctl nodes. */
|
/* Add sysctl nodes. */
|
||||||
bcm_pwm_sysctl_init(sc);
|
bcm_pwm_sysctl_init(sc);
|
||||||
|
|
||||||
sc->freq = 125000000;
|
sc->freq = 125000000; /* 125 Mhz */
|
||||||
sc->period = 10000;
|
sc->period = 10000; /* 12.5 khz */
|
||||||
sc->ratio = 2500;
|
sc->ratio = 2500; /* 25% */
|
||||||
|
sc->period2 = 10000; /* 12.5 khz */
|
||||||
|
sc->ratio2 = 2500; /* 25% */
|
||||||
|
|
||||||
return (bus_generic_attach(dev));
|
return (bus_generic_attach(dev));
|
||||||
}
|
}
|
||||||
@ -338,6 +474,7 @@ bcm_pwm_detach(device_t dev)
|
|||||||
|
|
||||||
sc = device_get_softc(dev);
|
sc = device_get_softc(dev);
|
||||||
sc->mode = 0;
|
sc->mode = 0;
|
||||||
|
sc->mode2 = 0;
|
||||||
(void)bcm_pwm_reconf(sc);
|
(void)bcm_pwm_reconf(sc);
|
||||||
if (sc->sc_mem_res)
|
if (sc->sc_mem_res)
|
||||||
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
|
||||||
|
Loading…
Reference in New Issue
Block a user