Switch over to using the generic joy driver

This commit is contained in:
Peter Wemm 1999-12-05 20:02:19 +00:00
parent 39cfe41b7c
commit 46db6cf83b
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=54160
6 changed files with 34 additions and 310 deletions

View File

@ -861,6 +861,7 @@ isa_if.h optional isa \
clean "isa_if.h"
isa/isa_common.c optional isa
isa/isahint.c optional isa
isa/joy.c optional joy
isa/pnp.c optional pnp
isa/pnpparse.c optional pnp
dev/sound/pcm/sound.c optional pcm

View File

@ -223,7 +223,6 @@ i386/isa/isa.c optional isa
i386/isa/isa_compat.c optional isa
i386/isa/isa_dma.c optional isa
i386/isa/istallion.c optional stli
i386/isa/joy.c optional joy
i386/isa/labpc.c optional labpc
i386/isa/loran.c optional loran
i386/isa/matcd/matcd.c optional matcd

View File

@ -223,7 +223,6 @@ i386/isa/isa.c optional isa
i386/isa/isa_compat.c optional isa
i386/isa/isa_dma.c optional isa
i386/isa/istallion.c optional stli
i386/isa/joy.c optional joy
i386/isa/labpc.c optional labpc
i386/isa/loran.c optional loran
i386/isa/matcd/matcd.c optional matcd

View File

@ -1,20 +0,0 @@
#ifndef _MACHINE_JOYSTICK_H_
#define _MACHINE_JOYSTICK_H_
#include <sys/ioccom.h>
struct joystick {
int x;
int y;
int b1;
int b2;
};
#define JOY_SETTIMEOUT _IOW('J', 1, int) /* set timeout */
#define JOY_GETTIMEOUT _IOR('J', 2, int) /* get timeout */
#define JOY_SET_X_OFFSET _IOW('J', 3, int) /* set offset on X-axis */
#define JOY_SET_Y_OFFSET _IOW('J', 4, int) /* set offset on X-axis */
#define JOY_GET_X_OFFSET _IOR('J', 5, int) /* get offset on X-axis */
#define JOY_GET_Y_OFFSET _IOR('J', 6, int) /* get offset on Y-axis */
#endif /* !_MACHINE_JOYSTICK_H_ */

View File

@ -1,285 +0,0 @@
/*-
* Copyright (c) 1995 Jean-Marc Zucconi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#include "joy.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <machine/clock.h>
#include <machine/joystick.h>
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/timerreg.h>
/* The game port can manage 4 buttons and 4 variable resistors (usually 2
* joysticks, each with 2 buttons and 2 pots.) via the port at address 0x201.
* Getting the state of the buttons is done by reading the game port:
* buttons 1-4 correspond to bits 4-7 and resistors 1-4 (X1, Y1, X2, Y2)
* to bits 0-3.
* if button 1 (resp 2, 3, 4) is pressed, the bit 4 (resp 5, 6, 7) is set to 0
* to get the value of a resistor, write the value 0xff at port and
* wait until the corresponding bit returns to 0.
*/
/* the formulae below only work if u is ``not too large''. See also
* the discussion in microtime.s */
#define usec2ticks(u) (((u) * 19549)>>14)
#define ticks2usec(u) (((u) * 3433)>>12)
#define joypart(d) (minor(d)&1)
#define UNIT(d) ((minor(d)>>1)&3)
#ifndef JOY_TIMEOUT
#define JOY_TIMEOUT 2000 /* 2 milliseconds */
#endif
static struct {
int port;
int x_off[2], y_off[2];
int timeout[2];
} joy[NJOY];
static int joyprobe (struct isa_device *);
static int joyattach (struct isa_device *);
struct isa_driver joydriver = {joyprobe, joyattach, "joy"};
#define CDEV_MAJOR 51
static d_open_t joyopen;
static d_close_t joyclose;
static d_read_t joyread;
static d_ioctl_t joyioctl;
static struct cdevsw joy_cdevsw = {
/* open */ joyopen,
/* close */ joyclose,
/* read */ joyread,
/* write */ nowrite,
/* ioctl */ joyioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "joy",
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* bmaj */ -1
};
static int get_tick __P((void));
static int
joyprobe (struct isa_device *dev)
{
static int once;
if (!once++)
cdevsw_add(&joy_cdevsw);
#ifdef WANT_JOYSTICK_CONNECTED
outb (dev->id_iobase, 0xff);
DELAY (10000); /* 10 ms delay */
return (inb (dev->id_iobase) & 0x0f) != 0x0f;
#else
return 1;
#endif
}
static int
joyattach (struct isa_device *dev)
{
int unit = dev->id_unit;
joy[unit].port = dev->id_iobase;
joy[unit].timeout[0] = joy[unit].timeout[1] = 0;
printf("joy%d: joystick\n", unit);
make_dev(&joy_cdevsw, 0, 0, 0, 0600, "joy%d", unit);
return 1;
}
static int
joyopen (dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = UNIT (dev);
int i = joypart (dev);
if (joy[unit].timeout[i])
return EBUSY;
joy[unit].x_off[i] = joy[unit].y_off[i] = 0;
joy[unit].timeout[i] = JOY_TIMEOUT;
return 0;
}
static int
joyclose (dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = UNIT (dev);
int i = joypart (dev);
joy[unit].timeout[i] = 0;
return 0;
}
static int
joyread (dev_t dev, struct uio *uio, int flag)
{
int unit = UNIT(dev);
int port = joy[unit].port;
int i, t0, t1;
int state = 0, x = 0, y = 0;
struct joystick c;
disable_intr ();
outb (port, 0xff);
t0 = get_tick ();
t1 = t0;
i = usec2ticks(joy[unit].timeout[joypart(dev)]);
while (t0-t1 < i) {
state = inb (port);
if (joypart(dev) == 1)
state >>= 2;
t1 = get_tick ();
if (t1 > t0)
t1 -= timer0_max_count;
if (!x && !(state & 0x01))
x = t1;
if (!y && !(state & 0x02))
y = t1;
if (x && y)
break;
}
enable_intr ();
c.x = x ? joy[unit].x_off[joypart(dev)] + ticks2usec(t0-x) : 0x80000000;
c.y = y ? joy[unit].y_off[joypart(dev)] + ticks2usec(t0-y) : 0x80000000;
state >>= 4;
c.b1 = ~state & 1;
c.b2 = ~(state >> 1) & 1;
return uiomove ((caddr_t)&c, sizeof(struct joystick), uio);
}
static int
joyioctl (dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
{
int unit = UNIT (dev);
int i = joypart (dev);
int x;
switch (cmd) {
case JOY_SETTIMEOUT:
x = *(int *) data;
if (x < 1 || x > 10000) /* 10ms maximum! */
return EINVAL;
joy[unit].timeout[i] = x;
break;
case JOY_GETTIMEOUT:
*(int *) data = joy[unit].timeout[i];
break;
case JOY_SET_X_OFFSET:
joy[unit].x_off[i] = *(int *) data;
break;
case JOY_SET_Y_OFFSET:
joy[unit].y_off[i] = *(int *) data;
break;
case JOY_GET_X_OFFSET:
*(int *) data = joy[unit].x_off[i];
break;
case JOY_GET_Y_OFFSET:
*(int *) data = joy[unit].y_off[i];
break;
default:
return ENXIO;
}
return 0;
}
static int
get_tick ()
{
int low, high;
outb (TIMER_MODE, TIMER_SEL0);
low = inb (TIMER_CNTR0);
high = inb (TIMER_CNTR0);
return (high << 8) | low;
}
#ifdef JOY_MODULE
#include <sys/exec.h>
#include <sys/sysent.h>
#include <sys/lkm.h>
MOD_DEV (joy, LM_DT_CHAR, CDEV_MAJOR, &joy_cdevsw);
static struct isa_device dev = {0, &joydriver, IO_GAME, 0, -1, (caddr_t) 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0};
static int
joy_load (struct lkm_table *lkmtp, int cmd)
{
if (joyprobe (&dev)) {
joyattach (&dev);
/* joy_drvinit (0);*/
uprintf ("Joystick driver loaded\n");
return 0;
} else {
uprintf ("Joystick driver: probe failed\n");
return 1;
}
}
static int
joy_unload (struct lkm_table *lkmtp, int cmd)
{
uprintf ("Joystick driver unloaded\n");
return 0;
}
static int
joy_stat (struct lkm_table *lkmtp, int cmd)
{
return 0;
}
int
joy_mod (struct lkm_table *lkmtp, int cmd, int ver)
{
MOD_DISPATCH(joy, lkmtp, cmd, ver,
joy_load, joy_unload, joy_stat);
}
#endif /* JOY_MODULE */

View File

@ -1,5 +1,35 @@
#ifndef _MACHINE_JOYSTICK_H_
#define _MACHINE_JOYSTICK_H_
/*-
* Copyright (c) 1995 Jean-Marc Zucconi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SYS_JOYSTICK_H_
#define _SYS_JOYSTICK_H_
#include <sys/ioccom.h>
@ -17,4 +47,4 @@ struct joystick {
#define JOY_GET_X_OFFSET _IOR('J', 5, int) /* get offset on X-axis */
#define JOY_GET_Y_OFFSET _IOR('J', 6, int) /* get offset on Y-axis */
#endif /* !_MACHINE_JOYSTICK_H_ */
#endif /* !_SYS_JOYSTICK_H_ */