ixgbe: remove whitespace in function comments
Remove unnecessary extra whitespace on all function comments, replacing ' * ' with ' * '. This was done automatically via sed using the following transformation: sed 's/^ \* / * /' Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Guinan Sun <guinanx.sun@intel.com> Reviewed-by: Wei Zhao <wei.zhao1@intel.com> Approved by: imp Obtained from: DPDK (40023f73c76579e58a859dab87b4c30278eb2e48) MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D31621
This commit is contained in:
Kevin Bowling
parent
9e65ae746d
commit
4cdc5e12a8
@ -69,14 +69,14 @@ static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
|
||||
static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 *sff8472_data);
|
||||
/**
|
||||
* ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* The defaults for 82598 should be in the range of 50us to 50ms,
|
||||
* however the hardware default for these parts is 500us to 1ms which is less
|
||||
* than the 10ms recommended by the pci-e spec. To address this we need to
|
||||
* increase the value to either 10ms to 250ms for capability version 1 config,
|
||||
* or 16ms to 55ms for version 2.
|
||||
* The defaults for 82598 should be in the range of 50us to 50ms,
|
||||
* however the hardware default for these parts is 500us to 1ms which is less
|
||||
* than the 10ms recommended by the pci-e spec. To address this we need to
|
||||
* increase the value to either 10ms to 250ms for capability version 1 config,
|
||||
* or 16ms to 55ms for version 2.
|
||||
**/
|
||||
void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -111,11 +111,11 @@ void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_ops_82598 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_ops_82598 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize the function pointers and assign the MAC type for 82598.
|
||||
* Does not touch the hardware.
|
||||
* Initialize the function pointers and assign the MAC type for 82598.
|
||||
* Does not touch the hardware.
|
||||
**/
|
||||
s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -181,12 +181,12 @@ s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_phy_ops_82598 - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_phy_ops_82598 - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
*
|
||||
**/
|
||||
s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
|
||||
@ -245,11 +245,11 @@ s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Starts the hardware using the generic start_hw function.
|
||||
* Disables relaxed ordering Then set pcie completion timeout
|
||||
* Starts the hardware using the generic start_hw function.
|
||||
* Disables relaxed ordering Then set pcie completion timeout
|
||||
*
|
||||
**/
|
||||
s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
|
||||
@ -287,12 +287,12 @@ s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: boolean auto-negotiation value
|
||||
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: boolean auto-negotiation value
|
||||
*
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
**/
|
||||
static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed,
|
||||
@ -348,10 +348,10 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_media_type_82598 - Determines media type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_media_type_82598 - Determines media type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
**/
|
||||
static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -401,10 +401,10 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fc_enable_82598 - Enable flow control
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_fc_enable_82598 - Enable flow control
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Enable flow control according to the current settings.
|
||||
* Enable flow control according to the current settings.
|
||||
**/
|
||||
s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -548,12 +548,12 @@ s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_mac_link_82598 - Configures MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_start_mac_link_82598 - Configures MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Configures link settings based on values in the ixgbe_hw struct.
|
||||
* Restarts the link. Performs autonegotiation if needed.
|
||||
* Configures link settings based on values in the ixgbe_hw struct.
|
||||
* Restarts the link. Performs autonegotiation if needed.
|
||||
**/
|
||||
static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
|
||||
bool autoneg_wait_to_complete)
|
||||
@ -597,11 +597,11 @@ static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_validate_link_ready - Function looks for phy link
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_validate_link_ready - Function looks for phy link
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Function indicates success when phy link is available. If phy is not ready
|
||||
* within 5 seconds of MAC indicating link, the function returns error.
|
||||
* Function indicates success when phy link is available. If phy is not ready
|
||||
* within 5 seconds of MAC indicating link, the function returns error.
|
||||
**/
|
||||
static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -632,13 +632,13 @@ static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_mac_link_82598 - Get link/speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
* @link_up_wait_to_complete: bool used to wait for link up or not
|
||||
* ixgbe_check_mac_link_82598 - Get link/speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
* @link_up_wait_to_complete: bool used to wait for link up or not
|
||||
*
|
||||
* Reads the links register to determine if link is up and the current speed
|
||||
* Reads the links register to determine if link is up and the current speed
|
||||
**/
|
||||
static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed, bool *link_up,
|
||||
@ -722,12 +722,12 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_82598 - Set MAC link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_setup_mac_link_82598 - Set MAC link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
**/
|
||||
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -776,12 +776,12 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
|
||||
|
||||
|
||||
/**
|
||||
* ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
||||
* ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
||||
*
|
||||
* Sets the link speed in the AUTOC register in the MAC and restarts link.
|
||||
* Sets the link speed in the AUTOC register in the MAC and restarts link.
|
||||
**/
|
||||
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -801,12 +801,12 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_hw_82598 - Performs hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_hw_82598 - Performs hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Resets the hardware by resetting the transmit and receive units, masks and
|
||||
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
|
||||
* reset.
|
||||
* Resets the hardware by resetting the transmit and receive units, masks and
|
||||
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
|
||||
* reset.
|
||||
**/
|
||||
static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -939,10 +939,10 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
|
||||
* @hw: pointer to hardware struct
|
||||
* @rar: receive address register index to associate with a VMDq index
|
||||
* @vmdq: VMDq set index
|
||||
* ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
|
||||
* @hw: pointer to hardware struct
|
||||
* @rar: receive address register index to associate with a VMDq index
|
||||
* @vmdq: VMDq set index
|
||||
**/
|
||||
s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
||||
{
|
||||
@ -965,10 +965,10 @@ s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
|
||||
* @hw: pointer to hardware struct
|
||||
* @rar: receive address register index to associate with a VMDq index
|
||||
* @vmdq: VMDq clear index (not used in 82598, but elsewhere)
|
||||
* ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
|
||||
* @hw: pointer to hardware struct
|
||||
* @rar: receive address register index to associate with a VMDq index
|
||||
* @vmdq: VMDq clear index (not used in 82598, but elsewhere)
|
||||
**/
|
||||
static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
||||
{
|
||||
@ -993,14 +993,14 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_vfta_82598 - Set VLAN filter table
|
||||
* @hw: pointer to hardware structure
|
||||
* @vlan: VLAN id to write to VLAN filter
|
||||
* @vind: VMDq output index that maps queue to VLAN id in VFTA
|
||||
* @vlan_on: boolean flag to turn on/off VLAN in VFTA
|
||||
* @vlvf_bypass: boolean flag - unused
|
||||
* ixgbe_set_vfta_82598 - Set VLAN filter table
|
||||
* @hw: pointer to hardware structure
|
||||
* @vlan: VLAN id to write to VLAN filter
|
||||
* @vind: VMDq output index that maps queue to VLAN id in VFTA
|
||||
* @vlan_on: boolean flag to turn on/off VLAN in VFTA
|
||||
* @vlvf_bypass: boolean flag - unused
|
||||
*
|
||||
* Turn on/off specified VLAN in the VLAN filter table.
|
||||
* Turn on/off specified VLAN in the VLAN filter table.
|
||||
**/
|
||||
s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
|
||||
bool vlan_on, bool vlvf_bypass)
|
||||
@ -1046,10 +1046,10 @@ s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clear_vfta_82598 - Clear VLAN filter table
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_clear_vfta_82598 - Clear VLAN filter table
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Clears the VLAN filer table, and the VMDq index associated with the filter
|
||||
* Clears the VLAN filer table, and the VMDq index associated with the filter
|
||||
**/
|
||||
static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1070,12 +1070,12 @@ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: analog register to read
|
||||
* @val: read value
|
||||
* ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: analog register to read
|
||||
* @val: read value
|
||||
*
|
||||
* Performs read operation to Atlas analog register specified.
|
||||
* Performs read operation to Atlas analog register specified.
|
||||
**/
|
||||
s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
||||
{
|
||||
@ -1094,12 +1094,12 @@ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: atlas register to write
|
||||
* @val: value to write
|
||||
* ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: atlas register to write
|
||||
* @val: value to write
|
||||
*
|
||||
* Performs write operation to Atlas analog register specified.
|
||||
* Performs write operation to Atlas analog register specified.
|
||||
**/
|
||||
s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
|
||||
{
|
||||
@ -1116,13 +1116,13 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @dev_addr: address to read from
|
||||
* @byte_offset: byte offset to read from dev_addr
|
||||
* @eeprom_data: value read
|
||||
* ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @dev_addr: address to read from
|
||||
* @byte_offset: byte offset to read from dev_addr
|
||||
* @eeprom_data: value read
|
||||
*
|
||||
* Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
|
||||
* Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
|
||||
**/
|
||||
static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
|
||||
u8 byte_offset, u8 *eeprom_data)
|
||||
@ -1190,12 +1190,12 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to read
|
||||
* @eeprom_data: value read
|
||||
* ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to read
|
||||
* @eeprom_data: value read
|
||||
*
|
||||
* Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
|
||||
* Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
|
||||
**/
|
||||
s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 *eeprom_data)
|
||||
@ -1205,12 +1205,12 @@ s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset at address 0xA2
|
||||
* @sff8472_data: value read
|
||||
* ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset at address 0xA2
|
||||
* @sff8472_data: value read
|
||||
*
|
||||
* Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
|
||||
* Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
|
||||
**/
|
||||
static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 *sff8472_data)
|
||||
@ -1220,10 +1220,10 @@ static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
**/
|
||||
u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1322,12 +1322,12 @@ u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
|
||||
* port devices.
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
|
||||
* port devices.
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* Calls common function and corrects issue with some single port devices
|
||||
* that enable LAN1 but not LAN0.
|
||||
* Calls common function and corrects issue with some single port devices
|
||||
* that enable LAN1 but not LAN0.
|
||||
**/
|
||||
void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1356,8 +1356,8 @@ void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
**/
|
||||
void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw)
|
||||
@ -1426,11 +1426,11 @@ static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
|
||||
* @hw: pointer to hardware structure
|
||||
* @regval: register value to write to RXCTRL
|
||||
* ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
|
||||
* @hw: pointer to hardware structure
|
||||
* @regval: register value to write to RXCTRL
|
||||
*
|
||||
* Enables the Rx DMA unit
|
||||
* Enables the Rx DMA unit
|
||||
**/
|
||||
s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval)
|
||||
{
|
||||
|
||||
@ -105,12 +105,12 @@ void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_phy_ops_82599 - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_phy_ops_82599 - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
*
|
||||
**/
|
||||
s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
|
||||
@ -239,14 +239,14 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
|
||||
* @hw: pointer to hardware structure
|
||||
* @locked: Return the if we locked for this read.
|
||||
* @reg_val: Value we read from AUTOC
|
||||
* prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
|
||||
* @hw: pointer to hardware structure
|
||||
* @locked: Return the if we locked for this read.
|
||||
* @reg_val: Value we read from AUTOC
|
||||
*
|
||||
* For this part (82599) we need to wrap read-modify-writes with a possible
|
||||
* FW/SW lock. It is assumed this lock will be freed with the next
|
||||
* prot_autoc_write_82599().
|
||||
* For this part (82599) we need to wrap read-modify-writes with a possible
|
||||
* FW/SW lock. It is assumed this lock will be freed with the next
|
||||
* prot_autoc_write_82599().
|
||||
*/
|
||||
s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
|
||||
{
|
||||
@ -272,7 +272,7 @@ s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
|
||||
* @hw: pointer to hardware structure
|
||||
* @autoc: value to write to AUTOC
|
||||
* @locked: bool to indicate whether the SW/FW lock was already taken by
|
||||
* previous proc_autoc_read_82599.
|
||||
* previous proc_autoc_read_82599.
|
||||
*
|
||||
* This part (82599) may need to hold the SW/FW lock around all writes to
|
||||
* AUTOC. Likewise after a write we need to do a pipeline reset.
|
||||
@ -312,11 +312,11 @@ s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_ops_82599 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_ops_82599 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize the function pointers and assign the MAC type for 82599.
|
||||
* Does not touch the hardware.
|
||||
* Initialize the function pointers and assign the MAC type for 82599.
|
||||
* Does not touch the hardware.
|
||||
**/
|
||||
|
||||
s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
|
||||
@ -406,12 +406,12 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_link_capabilities_82599 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
* ixgbe_get_link_capabilities_82599 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
*
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
**/
|
||||
s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed,
|
||||
@ -518,10 +518,10 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_media_type_82599 - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_media_type_82599 - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
**/
|
||||
enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -579,10 +579,10 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Disables link during D3 power down sequence.
|
||||
* Disables link during D3 power down sequence.
|
||||
*
|
||||
**/
|
||||
void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
|
||||
@ -602,12 +602,12 @@ void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_mac_link_82599 - Setup MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_start_mac_link_82599 - Setup MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Configures link settings based on values in the ixgbe_hw struct.
|
||||
* Restarts the link. Performs autonegotiation if needed.
|
||||
* Configures link settings based on values in the ixgbe_hw struct.
|
||||
* Restarts the link. Performs autonegotiation if needed.
|
||||
**/
|
||||
s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
|
||||
bool autoneg_wait_to_complete)
|
||||
@ -670,12 +670,12 @@ s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* The base drivers may require better control over SFP+ module
|
||||
* PHY states. This includes selectively shutting down the Tx
|
||||
* laser on the PHY, effectively halting physical link.
|
||||
* The base drivers may require better control over SFP+ module
|
||||
* PHY states. This includes selectively shutting down the Tx
|
||||
* laser on the PHY, effectively halting physical link.
|
||||
**/
|
||||
void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -693,12 +693,12 @@ void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* The base drivers may require better control over SFP+ module
|
||||
* PHY states. This includes selectively turning on the Tx
|
||||
* laser on the PHY, effectively starting physical link.
|
||||
* The base drivers may require better control over SFP+ module
|
||||
* PHY states. This includes selectively turning on the Tx
|
||||
* laser on the PHY, effectively starting physical link.
|
||||
**/
|
||||
void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -712,16 +712,16 @@ void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* When the driver changes the link speeds that it can support,
|
||||
* it sets autotry_restart to true to indicate that we need to
|
||||
* initiate a new autotry session with the link partner. To do
|
||||
* so, we set the speed then disable and re-enable the Tx laser, to
|
||||
* alert the link partner that it also needs to restart autotry on its
|
||||
* end. This is consistent with true clause 37 autoneg, which also
|
||||
* involves a loss of signal.
|
||||
* When the driver changes the link speeds that it can support,
|
||||
* it sets autotry_restart to true to indicate that we need to
|
||||
* initiate a new autotry session with the link partner. To do
|
||||
* so, we set the speed then disable and re-enable the Tx laser, to
|
||||
* alert the link partner that it also needs to restart autotry on its
|
||||
* end. This is consistent with true clause 37 autoneg, which also
|
||||
* involves a loss of signal.
|
||||
**/
|
||||
void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -739,11 +739,11 @@ void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_hard_rate_select_speed - Set module link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: link speed to set
|
||||
* ixgbe_set_hard_rate_select_speed - Set module link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: link speed to set
|
||||
*
|
||||
* Set module link speed via RS0/RS1 rate select pins.
|
||||
* Set module link speed via RS0/RS1 rate select pins.
|
||||
*/
|
||||
void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed)
|
||||
@ -768,12 +768,12 @@ void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Implements the Intel SmartSpeed algorithm.
|
||||
* Implements the Intel SmartSpeed algorithm.
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -880,12 +880,12 @@ s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_82599 - Set MAC link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_setup_mac_link_82599 - Set MAC link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -998,12 +998,12 @@ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
||||
* ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true if waiting is needed to complete
|
||||
*
|
||||
* Restarts link on PHY and MAC based on settings passed in.
|
||||
* Restarts link on PHY and MAC based on settings passed in.
|
||||
**/
|
||||
static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -1023,12 +1023,12 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_hw_82599 - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_hw_82599 - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
|
||||
* reset.
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
|
||||
* reset.
|
||||
**/
|
||||
s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1224,8 +1224,8 @@ static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
|
||||
* @hw: pointer to hardware structure
|
||||
**/
|
||||
s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1297,9 +1297,9 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register
|
||||
* ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register
|
||||
**/
|
||||
static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
|
||||
{
|
||||
@ -1338,9 +1338,9 @@ static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register, initially
|
||||
* ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register, initially
|
||||
* contains just the value of the Rx packet buffer allocation
|
||||
**/
|
||||
s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
|
||||
@ -1364,11 +1364,11 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register, initially
|
||||
* ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
|
||||
* @hw: pointer to hardware structure
|
||||
* @fdirctrl: value to write to flow director control register, initially
|
||||
* contains just the value of the Rx packet buffer allocation
|
||||
* @cloud_mode: true - cloud mode, false - other mode
|
||||
* @cloud_mode: true - cloud mode, false - other mode
|
||||
**/
|
||||
s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
|
||||
bool cloud_mode)
|
||||
@ -1403,9 +1403,9 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue
|
||||
* @hw: pointer to hardware structure
|
||||
* @dropqueue: Rx queue index used for the dropped packets
|
||||
* ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue
|
||||
* @hw: pointer to hardware structure
|
||||
* @dropqueue: Rx queue index used for the dropped packets
|
||||
**/
|
||||
void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue)
|
||||
{
|
||||
@ -1461,15 +1461,15 @@ do { \
|
||||
} while (0)
|
||||
|
||||
/**
|
||||
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
|
||||
* @input: input bitstream to compute the hash on
|
||||
* @common: compressed common input dword
|
||||
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
|
||||
* @input: input bitstream to compute the hash on
|
||||
* @common: compressed common input dword
|
||||
*
|
||||
* This function is almost identical to the function above but contains
|
||||
* several optimizations such as unwinding all of the loops, letting the
|
||||
* compiler work out all of the conditional ifs since the keys are static
|
||||
* defines, and computing two keys at once since the hashed dword stream
|
||||
* will be the same for both keys.
|
||||
* This function is almost identical to the function above but contains
|
||||
* several optimizations such as unwinding all of the loops, letting the
|
||||
* compiler work out all of the conditional ifs since the keys are static
|
||||
* defines, and computing two keys at once since the hashed dword stream
|
||||
* will be the same for both keys.
|
||||
**/
|
||||
u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
|
||||
union ixgbe_atr_hash_dword common)
|
||||
@ -1528,11 +1528,11 @@ u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
|
||||
* @hw: pointer to hardware structure
|
||||
* @input: unique input dword
|
||||
* @common: compressed common input dword
|
||||
* @queue: queue index to direct traffic to
|
||||
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
|
||||
* @hw: pointer to hardware structure
|
||||
* @input: unique input dword
|
||||
* @common: compressed common input dword
|
||||
* @queue: queue index to direct traffic to
|
||||
*
|
||||
* Note that the tunnel bit in input must not be set when the hardware
|
||||
* tunneling support does not exist.
|
||||
@ -1601,15 +1601,15 @@ do { \
|
||||
} while (0)
|
||||
|
||||
/**
|
||||
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
|
||||
* @input: input bitstream to compute the hash on
|
||||
* @input_mask: mask for the input bitstream
|
||||
* ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
|
||||
* @input: input bitstream to compute the hash on
|
||||
* @input_mask: mask for the input bitstream
|
||||
*
|
||||
* This function serves two main purposes. First it applies the input_mask
|
||||
* to the atr_input resulting in a cleaned up atr_input data stream.
|
||||
* Secondly it computes the hash and stores it in the bkt_hash field at
|
||||
* the end of the input byte stream. This way it will be available for
|
||||
* future use without needing to recompute the hash.
|
||||
* This function serves two main purposes. First it applies the input_mask
|
||||
* to the atr_input resulting in a cleaned up atr_input data stream.
|
||||
* Secondly it computes the hash and stores it in the bkt_hash field at
|
||||
* the end of the input byte stream. This way it will be available for
|
||||
* future use without needing to recompute the hash.
|
||||
**/
|
||||
void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
|
||||
union ixgbe_atr_input *input_mask)
|
||||
@ -1660,13 +1660,13 @@ void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
|
||||
* @input_mask: mask to be bit swapped
|
||||
* ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks
|
||||
* @input_mask: mask to be bit swapped
|
||||
*
|
||||
* The source and destination port masks for flow director are bit swapped
|
||||
* in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
|
||||
* generate a correctly swapped value we need to bit swap the mask and that
|
||||
* is what is accomplished by this function.
|
||||
* The source and destination port masks for flow director are bit swapped
|
||||
* in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
|
||||
* generate a correctly swapped value we need to bit swap the mask and that
|
||||
* is what is accomplished by this function.
|
||||
**/
|
||||
static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
|
||||
{
|
||||
@ -2000,16 +2000,16 @@ s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
|
||||
* @hw: pointer to hardware structure
|
||||
* @input: input bitstream
|
||||
* @input_mask: mask for the input bitstream
|
||||
* @soft_id: software index for the filters
|
||||
* @queue: queue index to direct traffic to
|
||||
* @cloud_mode: unused
|
||||
* ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
|
||||
* @hw: pointer to hardware structure
|
||||
* @input: input bitstream
|
||||
* @input_mask: mask for the input bitstream
|
||||
* @soft_id: software index for the filters
|
||||
* @queue: queue index to direct traffic to
|
||||
* @cloud_mode: unused
|
||||
*
|
||||
* Note that the caller to this function must lock before calling, since the
|
||||
* hardware writes must be protected from one another.
|
||||
* Note that the caller to this function must lock before calling, since the
|
||||
* hardware writes must be protected from one another.
|
||||
**/
|
||||
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
|
||||
union ixgbe_atr_input *input,
|
||||
@ -2067,12 +2067,12 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: analog register to read
|
||||
* @val: read value
|
||||
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: analog register to read
|
||||
* @val: read value
|
||||
*
|
||||
* Performs read operation to Omer analog register specified.
|
||||
* Performs read operation to Omer analog register specified.
|
||||
**/
|
||||
s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
||||
{
|
||||
@ -2091,12 +2091,12 @@ s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: atlas register to write
|
||||
* @val: value to write
|
||||
* ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg: atlas register to write
|
||||
* @val: value to write
|
||||
*
|
||||
* Performs write operation to Omer analog register specified.
|
||||
* Performs write operation to Omer analog register specified.
|
||||
**/
|
||||
s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
|
||||
{
|
||||
@ -2113,12 +2113,12 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Starts the hardware using the generic start_hw function
|
||||
* and the generation start_hw function.
|
||||
* Then performs revision-specific operations, if any.
|
||||
* Starts the hardware using the generic start_hw function
|
||||
* and the generation start_hw function.
|
||||
* Then performs revision-specific operations, if any.
|
||||
**/
|
||||
s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2144,12 +2144,12 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_phy_82599 - Get physical layer module
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_phy_82599 - Get physical layer module
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines the physical layer module found on the current adapter.
|
||||
* If PHY already detected, maintains current PHY type in hw struct,
|
||||
* otherwise executes the PHY detection routine.
|
||||
* Determines the physical layer module found on the current adapter.
|
||||
* If PHY already detected, maintains current PHY type in hw struct,
|
||||
* otherwise executes the PHY detection routine.
|
||||
**/
|
||||
s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2181,10 +2181,10 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
**/
|
||||
u64 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2268,11 +2268,11 @@ u64 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
|
||||
* @hw: pointer to hardware structure
|
||||
* @regval: register value to write to RXCTRL
|
||||
* ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
|
||||
* @hw: pointer to hardware structure
|
||||
* @regval: register value to write to RXCTRL
|
||||
*
|
||||
* Enables the Rx DMA unit for 82599
|
||||
* Enables the Rx DMA unit for 82599
|
||||
**/
|
||||
s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
|
||||
{
|
||||
@ -2299,14 +2299,14 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_verify_fw_version_82599 - verify FW version for 82599
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_verify_fw_version_82599 - verify FW version for 82599
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Verifies that installed the firmware version is 0.6 or higher
|
||||
* for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
|
||||
* Verifies that installed the firmware version is 0.6 or higher
|
||||
* for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
|
||||
*
|
||||
* Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
|
||||
* if the FW version is not supported.
|
||||
* Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
|
||||
* if the FW version is not supported.
|
||||
**/
|
||||
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2363,11 +2363,11 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns true if the LESM FW module is present and enabled. Otherwise
|
||||
* returns false. Smart Speed must be disabled if LESM FW module is enabled.
|
||||
* Returns true if the LESM FW module is present and enabled. Otherwise
|
||||
* returns false. Smart Speed must be disabled if LESM FW module is enabled.
|
||||
**/
|
||||
bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2407,15 +2407,15 @@ bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
|
||||
* fastest available method
|
||||
* ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
|
||||
* fastest available method
|
||||
*
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
*
|
||||
* Retrieves 16 bit word(s) read from EEPROM
|
||||
* Retrieves 16 bit word(s) read from EEPROM
|
||||
**/
|
||||
static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
|
||||
u16 words, u16 *data)
|
||||
@ -2442,14 +2442,14 @@ static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_eeprom_82599 - Read EEPROM word using
|
||||
* fastest available method
|
||||
* ixgbe_read_eeprom_82599 - Read EEPROM word using
|
||||
* fastest available method
|
||||
*
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
*
|
||||
* Reads a 16 bit word from the EEPROM
|
||||
* Reads a 16 bit word from the EEPROM
|
||||
**/
|
||||
static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
|
||||
u16 offset, u16 *data)
|
||||
@ -2475,7 +2475,7 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
|
||||
/**
|
||||
* ixgbe_reset_pipeline_82599 - perform pipeline reset
|
||||
*
|
||||
* @hw: pointer to hardware structure
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Reset pipeline by asserting Restart_AN together with LMS change to ensure
|
||||
* full pipeline reset. This function assumes the SW/FW lock is held.
|
||||
@ -2524,14 +2524,14 @@ s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
* ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
*
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 *data)
|
||||
@ -2582,14 +2582,14 @@ static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to read from
|
||||
* @data: value to write
|
||||
* ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to read from
|
||||
* @data: value to write
|
||||
*
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 data)
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -301,11 +301,11 @@ void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *cfg, int direction,
|
||||
* The following rules are checked:
|
||||
* 1. The sum of bandwidth percentages of all Bandwidth Groups must total 100%.
|
||||
* 2. The sum of bandwidth percentages of all Traffic Classes within a Bandwidth
|
||||
* Group must total 100.
|
||||
* Group must total 100.
|
||||
* 3. A Traffic Class should not be set to both Link Strict Priority
|
||||
* and Group Strict Priority.
|
||||
* and Group Strict Priority.
|
||||
* 4. Link strict Bandwidth Groups can only have link strict traffic classes
|
||||
* with zero bandwidth.
|
||||
* with zero bandwidth.
|
||||
*/
|
||||
s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *dcb_config)
|
||||
{
|
||||
|
||||
@ -40,7 +40,7 @@
|
||||
/*
|
||||
* Flow Director actually 'steals' part of the packet buffer
|
||||
* as its filter pool, this variable controls how much it uses:
|
||||
* 0 = 64K, 1 = 128K, 2 = 256K
|
||||
* 0 = 64K, 1 = 128K, 2 = 256K
|
||||
*/
|
||||
int fdir_pballoc = 1;
|
||||
|
||||
|
||||
@ -37,11 +37,11 @@
|
||||
#include "ixgbe_mbx.h"
|
||||
|
||||
/**
|
||||
* ixgbe_poll_for_msg - Wait for message notification
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to write
|
||||
* ixgbe_poll_for_msg - Wait for message notification
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to write
|
||||
*
|
||||
* returns SUCCESS if it successfully received a message notification
|
||||
* returns SUCCESS if it successfully received a message notification
|
||||
**/
|
||||
static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
{
|
||||
@ -69,11 +69,11 @@ static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_poll_for_ack - Wait for message acknowledgement
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to write
|
||||
* ixgbe_poll_for_ack - Wait for message acknowledgement
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to write
|
||||
*
|
||||
* returns SUCCESS if it successfully received a message acknowledgement
|
||||
* returns SUCCESS if it successfully received a message acknowledgement
|
||||
**/
|
||||
static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
{
|
||||
@ -101,14 +101,14 @@ static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_posted_mbx - Wait for message notification and receive message
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
* ixgbe_read_posted_mbx - Wait for message notification and receive message
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
*
|
||||
* returns SUCCESS if it successfully received a message notification and
|
||||
* copied it into the receive buffer.
|
||||
* returns SUCCESS if it successfully received a message notification and
|
||||
* copied it into the receive buffer.
|
||||
**/
|
||||
static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 mbx_id)
|
||||
@ -131,14 +131,14 @@ static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
* ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
*
|
||||
* returns SUCCESS if it successfully copied message into the buffer and
|
||||
* received an ack to that message within delay * timeout period
|
||||
* returns SUCCESS if it successfully copied message into the buffer and
|
||||
* received an ack to that message within delay * timeout period
|
||||
**/
|
||||
static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 mbx_id)
|
||||
@ -163,10 +163,10 @@ static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_mbx_ops_generic - Initialize MB function pointers
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_init_mbx_ops_generic - Initialize MB function pointers
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* Setups up the mailbox read and write message function pointers
|
||||
* Setups up the mailbox read and write message function pointers
|
||||
**/
|
||||
void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -177,11 +177,11 @@ void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_v2p_mailbox - read v2p mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_read_v2p_mailbox - read v2p mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* This function is used to read the v2p mailbox without losing the read to
|
||||
* clear status bits.
|
||||
* This function is used to read the v2p mailbox without losing the read to
|
||||
* clear status bits.
|
||||
**/
|
||||
static u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -194,12 +194,12 @@ static u32 ixgbe_read_v2p_mailbox(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_bit_vf - Determine if a status bit was set
|
||||
* @hw: pointer to the HW structure
|
||||
* @mask: bitmask for bits to be tested and cleared
|
||||
* ixgbe_check_for_bit_vf - Determine if a status bit was set
|
||||
* @hw: pointer to the HW structure
|
||||
* @mask: bitmask for bits to be tested and cleared
|
||||
*
|
||||
* This function is used to check for the read to clear bits within
|
||||
* the V2P mailbox.
|
||||
* This function is used to check for the read to clear bits within
|
||||
* the V2P mailbox.
|
||||
**/
|
||||
static s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -215,11 +215,11 @@ static s32 ixgbe_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_msg_vf - checks to see if the PF has sent mail
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
* ixgbe_check_for_msg_vf - checks to see if the PF has sent mail
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
*
|
||||
* returns SUCCESS if the PF has set the Status bit or else ERR_MBX
|
||||
* returns SUCCESS if the PF has set the Status bit or else ERR_MBX
|
||||
**/
|
||||
static s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
{
|
||||
@ -237,11 +237,11 @@ static s32 ixgbe_check_for_msg_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
* ixgbe_check_for_ack_vf - checks to see if the PF has ACK'd
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
*
|
||||
* returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
|
||||
* returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
|
||||
**/
|
||||
static s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
{
|
||||
@ -259,11 +259,11 @@ static s32 ixgbe_check_for_ack_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_rst_vf - checks to see if the PF has reset
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
* ixgbe_check_for_rst_vf - checks to see if the PF has reset
|
||||
* @hw: pointer to the HW structure
|
||||
* @mbx_id: id of mailbox to check
|
||||
*
|
||||
* returns true if the PF has set the reset done bit or else false
|
||||
* returns true if the PF has set the reset done bit or else false
|
||||
**/
|
||||
static s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
{
|
||||
@ -282,10 +282,10 @@ static s32 ixgbe_check_for_rst_vf(struct ixgbe_hw *hw, u16 mbx_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_obtain_mbx_lock_vf - obtain mailbox lock
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_obtain_mbx_lock_vf - obtain mailbox lock
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* return SUCCESS if we obtained the mailbox lock
|
||||
* return SUCCESS if we obtained the mailbox lock
|
||||
**/
|
||||
static s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -304,13 +304,13 @@ static s32 ixgbe_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_mbx_vf - Write a message to the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
* ixgbe_write_mbx_vf - Write a message to the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to write
|
||||
*
|
||||
* returns SUCCESS if it successfully copied message into the buffer
|
||||
* returns SUCCESS if it successfully copied message into the buffer
|
||||
**/
|
||||
static s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 mbx_id)
|
||||
@ -346,13 +346,13 @@ static s32 ixgbe_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to read
|
||||
* ixgbe_read_mbx_vf - Reads a message from the inbox intended for vf
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @mbx_id: id of mailbox to read
|
||||
*
|
||||
* returns SUCCESS if it successfully read message from buffer
|
||||
* returns SUCCESS if it successfully read message from buffer
|
||||
**/
|
||||
static s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 mbx_id)
|
||||
@ -383,10 +383,10 @@ static s32 ixgbe_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_mbx_params_vf - set initial values for vf mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_init_mbx_params_vf - set initial values for vf mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* Initializes the hw->mbx struct to correct values for vf mailbox
|
||||
* Initializes the hw->mbx struct to correct values for vf mailbox
|
||||
*/
|
||||
void ixgbe_init_mbx_params_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -428,11 +428,11 @@ static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
**/
|
||||
static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
{
|
||||
@ -452,11 +452,11 @@ static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
**/
|
||||
static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
{
|
||||
@ -476,11 +476,11 @@ static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_for_rst_pf - checks to see if the VF has reset
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_check_for_rst_pf - checks to see if the VF has reset
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
* returns SUCCESS if the VF has set the Status bit or else ERR_MBX
|
||||
**/
|
||||
static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
{
|
||||
@ -515,11 +515,11 @@ static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
|
||||
* @hw: pointer to the HW structure
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* return SUCCESS if we obtained the mailbox lock
|
||||
* return SUCCESS if we obtained the mailbox lock
|
||||
**/
|
||||
static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
{
|
||||
@ -544,13 +544,13 @@ static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_mbx_pf - Places a message in the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_write_mbx_pf - Places a message in the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* returns SUCCESS if it successfully copied message into the buffer
|
||||
* returns SUCCESS if it successfully copied message into the buffer
|
||||
**/
|
||||
static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 vf_number)
|
||||
@ -585,15 +585,15 @@ static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_mbx_pf - Read a message from the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @vf_number: the VF index
|
||||
* ixgbe_read_mbx_pf - Read a message from the mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* @msg: The message buffer
|
||||
* @size: Length of buffer
|
||||
* @vf_number: the VF index
|
||||
*
|
||||
* This function copies a message from the mailbox buffer to the caller's
|
||||
* memory buffer. The presumption is that the caller knows that there was
|
||||
* a message due to a VF request so no polling for message is needed.
|
||||
* This function copies a message from the mailbox buffer to the caller's
|
||||
* memory buffer. The presumption is that the caller knows that there was
|
||||
* a message due to a VF request so no polling for message is needed.
|
||||
**/
|
||||
static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
u16 vf_number)
|
||||
@ -623,10 +623,10 @@ static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_mbx_params_pf - set initial values for pf mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
* ixgbe_init_mbx_params_pf - set initial values for pf mailbox
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
* Initializes the hw->mbx struct to correct values for pf mailbox
|
||||
* Initializes the hw->mbx struct to correct values for pf mailbox
|
||||
*/
|
||||
void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
|
||||
{
|
||||
|
||||
@ -245,10 +245,10 @@ s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_phy_ops_generic - Inits PHY function ptrs
|
||||
* @hw: pointer to the hardware structure
|
||||
* ixgbe_init_phy_ops_generic - Inits PHY function ptrs
|
||||
* @hw: pointer to the hardware structure
|
||||
*
|
||||
* Initialize the function pointers.
|
||||
* Initialize the function pointers.
|
||||
**/
|
||||
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -319,10 +319,10 @@ static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_phy_generic - Get physical layer module
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_phy_generic - Get physical layer module
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines the physical layer module found on the current adapter.
|
||||
* Determines the physical layer module found on the current adapter.
|
||||
**/
|
||||
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -398,9 +398,9 @@ s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_validate_phy_addr - Determines phy address is valid
|
||||
* @hw: pointer to hardware structure
|
||||
* @phy_addr: PHY address
|
||||
* ixgbe_validate_phy_addr - Determines phy address is valid
|
||||
* @hw: pointer to hardware structure
|
||||
* @phy_addr: PHY address
|
||||
*
|
||||
**/
|
||||
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
|
||||
@ -423,8 +423,8 @@ bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_phy_id - Get the phy type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_phy_id - Get the phy type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
**/
|
||||
s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
|
||||
@ -454,8 +454,8 @@ s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_phy_type_from_id - Get the phy type
|
||||
* @phy_id: PHY ID information
|
||||
* ixgbe_get_phy_type_from_id - Get the phy type
|
||||
* @phy_id: PHY ID information
|
||||
*
|
||||
**/
|
||||
enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
|
||||
@ -495,8 +495,8 @@ enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_phy_generic - Performs a PHY reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_phy_generic - Performs a PHY reset
|
||||
* @hw: pointer to hardware structure
|
||||
**/
|
||||
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -574,12 +574,12 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
|
||||
* the SWFW lock
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
* ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
|
||||
* the SWFW lock
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
**/
|
||||
s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
||||
u16 *phy_data)
|
||||
@ -656,12 +656,12 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
|
||||
* using the SWFW lock - this function is needed in most cases
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
|
||||
* using the SWFW lock - this function is needed in most cases
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
**/
|
||||
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u16 *phy_data)
|
||||
@ -682,12 +682,12 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
|
||||
* without SWFW lock
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
* ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
|
||||
* without SWFW lock
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
**/
|
||||
s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u16 phy_data)
|
||||
@ -756,12 +756,12 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
|
||||
* using SWFW lock- this function is needed in most cases
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
|
||||
* using SWFW lock- this function is needed in most cases
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
**/
|
||||
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u16 phy_data)
|
||||
@ -783,10 +783,10 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_phy_link_generic - Set and restart auto-neg
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_phy_link_generic - Set and restart auto-neg
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Restart auto-negotiation and PHY and waits for completion.
|
||||
* Restart auto-negotiation and PHY and waits for completion.
|
||||
**/
|
||||
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -874,10 +874,10 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
**/
|
||||
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -959,10 +959,10 @@ static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: boolean auto-negotiation value
|
||||
* ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: boolean auto-negotiation value
|
||||
**/
|
||||
s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed,
|
||||
@ -981,13 +981,13 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_phy_link_tnx - Determine link and speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: current link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
* ixgbe_check_phy_link_tnx - Determine link and speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: current link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
*
|
||||
* Reads the VS1 register to determine if link is up and the current speed for
|
||||
* the PHY.
|
||||
* Reads the VS1 register to determine if link is up and the current speed for
|
||||
* the PHY.
|
||||
**/
|
||||
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
||||
bool *link_up)
|
||||
@ -1110,9 +1110,9 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
|
||||
* @hw: pointer to hardware structure
|
||||
* @firmware_version: pointer to the PHY Firmware Version
|
||||
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
|
||||
* @hw: pointer to hardware structure
|
||||
* @firmware_version: pointer to the PHY Firmware Version
|
||||
**/
|
||||
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
||||
u16 *firmware_version)
|
||||
@ -1129,9 +1129,9 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
|
||||
* @hw: pointer to hardware structure
|
||||
* @firmware_version: pointer to the PHY Firmware Version
|
||||
* ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
|
||||
* @hw: pointer to hardware structure
|
||||
* @firmware_version: pointer to the PHY Firmware Version
|
||||
**/
|
||||
s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
|
||||
u16 *firmware_version)
|
||||
@ -1148,8 +1148,8 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_phy_nl - Performs a PHY reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_phy_nl - Performs a PHY reset
|
||||
* @hw: pointer to hardware structure
|
||||
**/
|
||||
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1264,10 +1264,10 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_module_generic - Identifies module type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_module_generic - Identifies module type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines HW type and calls appropriate function.
|
||||
* Determines HW type and calls appropriate function.
|
||||
**/
|
||||
s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1294,10 +1294,10 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_sfp_module_generic - Identifies SFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_sfp_module_generic - Identifies SFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Searches for and identifies the SFP module and assigns appropriate PHY type.
|
||||
* Searches for and identifies the SFP module and assigns appropriate PHY type.
|
||||
**/
|
||||
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1572,10 +1572,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines physical layer capabilities of the current SFP.
|
||||
* Determines physical layer capabilities of the current SFP.
|
||||
*/
|
||||
u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1634,10 +1634,10 @@ u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Searches for and identifies the QSFP module and assigns appropriate PHY type
|
||||
* Searches for and identifies the QSFP module and assigns appropriate PHY type
|
||||
**/
|
||||
s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1824,13 +1824,13 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
|
||||
* @hw: pointer to hardware structure
|
||||
* @list_offset: offset to the SFP ID list
|
||||
* @data_offset: offset to the SFP data block
|
||||
* ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
|
||||
* @hw: pointer to hardware structure
|
||||
* @list_offset: offset to the SFP ID list
|
||||
* @data_offset: offset to the SFP data block
|
||||
*
|
||||
* Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
|
||||
* so it returns the offsets to the phy init sequence block.
|
||||
* Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
|
||||
* so it returns the offsets to the phy init sequence block.
|
||||
**/
|
||||
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
|
||||
u16 *list_offset,
|
||||
@ -1919,12 +1919,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to read
|
||||
* @eeprom_data: value read
|
||||
* ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to read
|
||||
* @eeprom_data: value read
|
||||
*
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
||||
**/
|
||||
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 *eeprom_data)
|
||||
@ -1937,12 +1937,12 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset at address 0xA2
|
||||
* @sff8472_data: value read
|
||||
* ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset at address 0xA2
|
||||
* @sff8472_data: value read
|
||||
*
|
||||
* Performs byte read operation to SFP module's SFF-8472 data over I2C
|
||||
* Performs byte read operation to SFP module's SFF-8472 data over I2C
|
||||
**/
|
||||
static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 *sff8472_data)
|
||||
@ -1953,12 +1953,12 @@ static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to write
|
||||
* @eeprom_data: value to write
|
||||
* ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: EEPROM byte offset to write
|
||||
* @eeprom_data: value to write
|
||||
*
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface.
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface.
|
||||
**/
|
||||
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 eeprom_data)
|
||||
@ -1986,15 +1986,15 @@ static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
* @lock: true if to take and release semaphore
|
||||
* ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
* @lock: true if to take and release semaphore
|
||||
*
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 *data, bool lock)
|
||||
@ -2078,14 +2078,14 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
* ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
*
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 *data)
|
||||
@ -2095,14 +2095,14 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
* ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to read
|
||||
* @dev_addr: address to read from
|
||||
* @data: value read
|
||||
*
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 *data)
|
||||
@ -2112,15 +2112,15 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
* @lock: true if to take and release semaphore
|
||||
* ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
* @lock: true if to take and release semaphore
|
||||
*
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 data, bool lock)
|
||||
@ -2184,14 +2184,14 @@ static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
* ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
*
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 data)
|
||||
@ -2201,14 +2201,14 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
* ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @byte_offset: byte offset to write
|
||||
* @dev_addr: address to write to
|
||||
* @data: value to write
|
||||
*
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
||||
* a specified device address.
|
||||
**/
|
||||
s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
u8 dev_addr, u8 data)
|
||||
@ -2218,11 +2218,11 @@ s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_i2c_start - Sets I2C start condition
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_i2c_start - Sets I2C start condition
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Sets I2C start condition (High -> Low on SDA while SCL is High)
|
||||
* Set bit-bang mode on X550 hardware.
|
||||
* Sets I2C start condition (High -> Low on SDA while SCL is High)
|
||||
* Set bit-bang mode on X550 hardware.
|
||||
**/
|
||||
static void ixgbe_i2c_start(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2252,12 +2252,12 @@ static void ixgbe_i2c_start(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_i2c_stop - Sets I2C stop condition
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_i2c_stop - Sets I2C stop condition
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Sets I2C stop condition (Low -> High on SDA while SCL is High)
|
||||
* Disables bit-bang mode and negates data output enable on X550
|
||||
* hardware.
|
||||
* Sets I2C stop condition (Low -> High on SDA while SCL is High)
|
||||
* Disables bit-bang mode and negates data output enable on X550
|
||||
* hardware.
|
||||
**/
|
||||
static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2289,11 +2289,11 @@ static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data byte to clock in
|
||||
* ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data byte to clock in
|
||||
*
|
||||
* Clocks in one byte data via I2C data/clock
|
||||
* Clocks in one byte data via I2C data/clock
|
||||
**/
|
||||
static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
|
||||
{
|
||||
@ -2312,11 +2312,11 @@ static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data byte clocked out
|
||||
* ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data byte clocked out
|
||||
*
|
||||
* Clocks out one byte data via I2C data/clock
|
||||
* Clocks out one byte data via I2C data/clock
|
||||
**/
|
||||
static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
|
||||
{
|
||||
@ -2346,10 +2346,10 @@ static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_i2c_ack - Polls for I2C ACK
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_i2c_ack - Polls for I2C ACK
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Clocks in/out one bit via I2C data/clock
|
||||
* Clocks in/out one bit via I2C data/clock
|
||||
**/
|
||||
static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2398,11 +2398,11 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: read data value
|
||||
* ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: read data value
|
||||
*
|
||||
* Clocks in one bit via I2C data/clock
|
||||
* Clocks in one bit via I2C data/clock
|
||||
**/
|
||||
static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
|
||||
{
|
||||
@ -2434,11 +2434,11 @@ static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data value to write
|
||||
* ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @data: data value to write
|
||||
*
|
||||
* Clocks out one bit via I2C data/clock
|
||||
* Clocks out one bit via I2C data/clock
|
||||
**/
|
||||
static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
|
||||
{
|
||||
@ -2470,12 +2470,12 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_raise_i2c_clk - Raises the I2C SCL clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
* ixgbe_raise_i2c_clk - Raises the I2C SCL clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
*
|
||||
* Raises the I2C clock line '0'->'1'
|
||||
* Negates the I2C clock output enable on X550 hardware.
|
||||
* Raises the I2C clock line '0'->'1'
|
||||
* Negates the I2C clock output enable on X550 hardware.
|
||||
**/
|
||||
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
{
|
||||
@ -2506,12 +2506,12 @@ static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
* ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
*
|
||||
* Lowers the I2C clock line '1'->'0'
|
||||
* Asserts the I2C clock output enable on X550 hardware.
|
||||
* Lowers the I2C clock line '1'->'0'
|
||||
* Asserts the I2C clock output enable on X550 hardware.
|
||||
**/
|
||||
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
{
|
||||
@ -2528,13 +2528,13 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_i2c_data - Sets the I2C data bit
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
* @data: I2C data value (0 or 1) to set
|
||||
* ixgbe_set_i2c_data - Sets the I2C data bit
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
* @data: I2C data value (0 or 1) to set
|
||||
*
|
||||
* Sets the I2C data bit
|
||||
* Asserts the I2C data output enable on X550 hardware.
|
||||
* Sets the I2C data bit
|
||||
* Asserts the I2C data output enable on X550 hardware.
|
||||
**/
|
||||
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
|
||||
{
|
||||
@ -2576,12 +2576,12 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_i2c_data - Reads the I2C SDA data bit
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
* ixgbe_get_i2c_data - Reads the I2C SDA data bit
|
||||
* @hw: pointer to hardware structure
|
||||
* @i2cctl: Current value of I2CCTL register
|
||||
*
|
||||
* Returns the I2C data bit value
|
||||
* Negates the I2C data output enable on X550 hardware.
|
||||
* Returns the I2C data bit value
|
||||
* Negates the I2C data output enable on X550 hardware.
|
||||
**/
|
||||
static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
{
|
||||
@ -2607,11 +2607,11 @@ static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_i2c_bus_clear - Clears the I2C bus
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_i2c_bus_clear - Clears the I2C bus
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Clears the I2C bus by sending nine clock pulses.
|
||||
* Used when data line is stuck low.
|
||||
* Clears the I2C bus by sending nine clock pulses.
|
||||
* Used when data line is stuck low.
|
||||
**/
|
||||
void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2644,10 +2644,10 @@ void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Checks if the LASI temp alarm status was triggered due to overtemp
|
||||
* Checks if the LASI temp alarm status was triggered due to overtemp
|
||||
**/
|
||||
s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
|
||||
{
|
||||
|
||||
@ -44,13 +44,13 @@
|
||||
#endif
|
||||
|
||||
/**
|
||||
* ixgbe_init_ops_vf - Initialize the pointers for vf
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_ops_vf - Initialize the pointers for vf
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* This will assign function pointers, adapter-specific functions can
|
||||
* override the assignment of generic function pointers by assigning
|
||||
* their own adapter-specific function pointers.
|
||||
* Does not touch the hardware.
|
||||
* This will assign function pointers, adapter-specific functions can
|
||||
* override the assignment of generic function pointers by assigning
|
||||
* their own adapter-specific function pointers.
|
||||
* Does not touch the hardware.
|
||||
**/
|
||||
s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -92,7 +92,7 @@ s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/* ixgbe_virt_clr_reg - Set register to default (power on) state.
|
||||
* @hw: pointer to hardware structure
|
||||
* @hw: pointer to hardware structure
|
||||
*/
|
||||
static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -135,13 +135,13 @@ static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_hw_vf - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_start_hw_vf - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Starts the hardware by filling the bus info structure and media type, clears
|
||||
* all on chip counters, initializes receive address registers, multicast
|
||||
* table, VLAN filter table, calls routine to set up link and flow control
|
||||
* settings, and leaves transmit and receive units disabled and uninitialized
|
||||
* Starts the hardware by filling the bus info structure and media type, clears
|
||||
* all on chip counters, initializes receive address registers, multicast
|
||||
* table, VLAN filter table, calls routine to set up link and flow control
|
||||
* settings, and leaves transmit and receive units disabled and uninitialized
|
||||
**/
|
||||
s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -152,11 +152,11 @@ s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_hw_vf - virtual function hardware initialization
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_hw_vf - virtual function hardware initialization
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize the hardware by resetting the hardware and then starting
|
||||
* the hardware
|
||||
* Initialize the hardware by resetting the hardware and then starting
|
||||
* the hardware
|
||||
**/
|
||||
s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -168,11 +168,11 @@ s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_hw_vf - Performs hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_hw_vf - Performs hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Resets the hardware by reseting the transmit and receive units, masks and
|
||||
* clears all interrupts.
|
||||
* Resets the hardware by reseting the transmit and receive units, masks and
|
||||
* clears all interrupts.
|
||||
**/
|
||||
s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -240,13 +240,13 @@ s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_stop_adapter_vf - Generic stop Tx/Rx units
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_stop_adapter_vf - Generic stop Tx/Rx units
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
|
||||
* disables transmit and receive units. The adapter_stopped flag is used by
|
||||
* the shared code and drivers to determine if the adapter is in a stopped
|
||||
* state and should not touch the hardware.
|
||||
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
|
||||
* disables transmit and receive units. The adapter_stopped flag is used by
|
||||
* the shared code and drivers to determine if the adapter is in a stopped
|
||||
* state and should not touch the hardware.
|
||||
**/
|
||||
s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -286,16 +286,16 @@ s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_mta_vector - Determines bit-vector in multicast table to set
|
||||
* @hw: pointer to hardware structure
|
||||
* @mc_addr: the multicast address
|
||||
* ixgbe_mta_vector - Determines bit-vector in multicast table to set
|
||||
* @hw: pointer to hardware structure
|
||||
* @mc_addr: the multicast address
|
||||
*
|
||||
* Extracts the 12 bits, from a multicast address, to determine which
|
||||
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
|
||||
* incoming rx multicast addresses, to determine the bit-vector to check in
|
||||
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
|
||||
* by the MO field of the MCSTCTRL. The MO field is set during initialization
|
||||
* to mc_filter_type.
|
||||
* Extracts the 12 bits, from a multicast address, to determine which
|
||||
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
|
||||
* incoming rx multicast addresses, to determine the bit-vector to check in
|
||||
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
|
||||
* by the MO field of the MCSTCTRL. The MO field is set during initialization
|
||||
* to mc_filter_type.
|
||||
**/
|
||||
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
|
||||
{
|
||||
@ -338,12 +338,12 @@ static s32 ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw, u32 *msg,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_rar_vf - set device MAC address
|
||||
* @hw: pointer to hardware structure
|
||||
* @index: Receive address register to write
|
||||
* @addr: Address to put into receive address register
|
||||
* @vmdq: VMDq "set" or "pool" index
|
||||
* @enable_addr: set flag that address is active
|
||||
* ixgbe_set_rar_vf - set device MAC address
|
||||
* @hw: pointer to hardware structure
|
||||
* @index: Receive address register to write
|
||||
* @addr: Address to put into receive address register
|
||||
* @vmdq: VMDq "set" or "pool" index
|
||||
* @enable_addr: set flag that address is active
|
||||
**/
|
||||
s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
|
||||
u32 enable_addr)
|
||||
@ -371,14 +371,14 @@ s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_update_mc_addr_list_vf - Update Multicast addresses
|
||||
* @hw: pointer to the HW structure
|
||||
* @mc_addr_list: array of multicast addresses to program
|
||||
* @mc_addr_count: number of multicast addresses to program
|
||||
* @next: caller supplied function to return next address in list
|
||||
* @clear: unused
|
||||
* ixgbe_update_mc_addr_list_vf - Update Multicast addresses
|
||||
* @hw: pointer to the HW structure
|
||||
* @mc_addr_list: array of multicast addresses to program
|
||||
* @mc_addr_count: number of multicast addresses to program
|
||||
* @next: caller supplied function to return next address in list
|
||||
* @clear: unused
|
||||
*
|
||||
* Updates the Multicast Table Array.
|
||||
* Updates the Multicast Table Array.
|
||||
**/
|
||||
s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
|
||||
u32 mc_addr_count, ixgbe_mc_addr_itr next,
|
||||
@ -420,11 +420,11 @@ s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbevf_update_xcast_mode - Update Multicast mode
|
||||
* @hw: pointer to the HW structure
|
||||
* @xcast_mode: new multicast mode
|
||||
* ixgbevf_update_xcast_mode - Update Multicast mode
|
||||
* @hw: pointer to the HW structure
|
||||
* @xcast_mode: new multicast mode
|
||||
*
|
||||
* Updates the Multicast Mode of VF.
|
||||
* Updates the Multicast Mode of VF.
|
||||
**/
|
||||
s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
|
||||
{
|
||||
@ -457,14 +457,14 @@ s32 ixgbevf_update_xcast_mode(struct ixgbe_hw *hw, int xcast_mode)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_vfta_vf - Set/Unset vlan filter table address
|
||||
* @hw: pointer to the HW structure
|
||||
* @vlan: 12 bit VLAN ID
|
||||
* @vind: unused by VF drivers
|
||||
* @vlan_on: if true then set bit, else clear bit
|
||||
* @vlvf_bypass: boolean flag indicating updating default pool is okay
|
||||
* ixgbe_set_vfta_vf - Set/Unset vlan filter table address
|
||||
* @hw: pointer to the HW structure
|
||||
* @vlan: 12 bit VLAN ID
|
||||
* @vind: unused by VF drivers
|
||||
* @vlan_on: if true then set bit, else clear bit
|
||||
* @vlvf_bypass: boolean flag indicating updating default pool is okay
|
||||
*
|
||||
* Turn on/off specified VLAN in the VLAN filter table.
|
||||
* Turn on/off specified VLAN in the VLAN filter table.
|
||||
**/
|
||||
s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
|
||||
bool vlan_on, bool vlvf_bypass)
|
||||
@ -486,10 +486,10 @@ s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_num_of_tx_queues_vf - Get number of TX queues
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_num_of_tx_queues_vf - Get number of TX queues
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the number of transmit queues for the given adapter.
|
||||
* Returns the number of transmit queues for the given adapter.
|
||||
**/
|
||||
u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -498,10 +498,10 @@ u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_num_of_rx_queues_vf - Get number of RX queues
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_num_of_rx_queues_vf - Get number of RX queues
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the number of receive queues for the given adapter.
|
||||
* Returns the number of receive queues for the given adapter.
|
||||
**/
|
||||
u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -555,12 +555,12 @@ s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_vf - Setup MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_setup_mac_link_vf - Setup MAC link settings
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
* Set the link speed in the AUTOC register and restarts link.
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
||||
bool autoneg_wait_to_complete)
|
||||
@ -570,13 +570,13 @@ s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_check_mac_link_vf - Get link/speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_check_mac_link_vf - Get link/speed status
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @link_up: true is link is up, false otherwise
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
*
|
||||
* Reads the links register to determine if link is up and the current speed
|
||||
* Reads the links register to determine if link is up and the current speed
|
||||
**/
|
||||
s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
||||
bool *link_up, bool autoneg_wait_to_complete)
|
||||
@ -673,9 +673,9 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbevf_rlpml_set_vf - Set the maximum receive packet length
|
||||
* @hw: pointer to the HW structure
|
||||
* @max_size: value to assign to max frame size
|
||||
* ixgbevf_rlpml_set_vf - Set the maximum receive packet length
|
||||
* @hw: pointer to the HW structure
|
||||
* @max_size: value to assign to max frame size
|
||||
**/
|
||||
s32 ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
|
||||
{
|
||||
@ -696,9 +696,9 @@ s32 ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbevf_negotiate_api_version - Negotiate supported API version
|
||||
* @hw: pointer to the HW structure
|
||||
* @api: integer containing requested API version
|
||||
* ixgbevf_negotiate_api_version - Negotiate supported API version
|
||||
* @hw: pointer to the HW structure
|
||||
* @api: integer containing requested API version
|
||||
**/
|
||||
int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
|
||||
{
|
||||
|
||||
@ -51,11 +51,11 @@ static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
|
||||
static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
|
||||
|
||||
/**
|
||||
* ixgbe_init_ops_X540 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_ops_X540 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize the function pointers and assign the MAC type for X540.
|
||||
* Does not touch the hardware.
|
||||
* Initialize the function pointers and assign the MAC type for X540.
|
||||
* Does not touch the hardware.
|
||||
**/
|
||||
s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -161,12 +161,12 @@ s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_link_capabilities_X540 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
* ixgbe_get_link_capabilities_X540 - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
*
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
* Determines the link capabilities by reading the AUTOC register.
|
||||
**/
|
||||
s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed,
|
||||
@ -178,10 +178,10 @@ s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_media_type_X540 - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_media_type_X540 - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
**/
|
||||
enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -190,10 +190,10 @@ enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
* ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: true when waiting for completion is needed
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -204,11 +204,11 @@ s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_hw_X540 - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_hw_X540 - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, and perform a reset.
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, and perform a reset.
|
||||
**/
|
||||
s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -306,12 +306,12 @@ s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Starts the hardware using the generic start_hw function
|
||||
* and the generation start_hw function.
|
||||
* Then performs revision-specific operations, if any.
|
||||
* Starts the hardware using the generic start_hw function
|
||||
* and the generation start_hw function.
|
||||
* Then performs revision-specific operations, if any.
|
||||
**/
|
||||
s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -330,10 +330,10 @@ s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
**/
|
||||
u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -355,11 +355,11 @@ u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
|
||||
* ixgbe_hw struct in order to set up EEPROM access.
|
||||
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
|
||||
* ixgbe_hw struct in order to set up EEPROM access.
|
||||
**/
|
||||
s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -387,12 +387,12 @@ s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_eerd_X540- Read EEPROM word using EERD
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
* ixgbe_read_eerd_X540- Read EEPROM word using EERD
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
*
|
||||
* Reads a 16 bit word from the EEPROM using the EERD register.
|
||||
* Reads a 16 bit word from the EEPROM using the EERD register.
|
||||
**/
|
||||
s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
|
||||
{
|
||||
@ -411,13 +411,13 @@ s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
* ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
*
|
||||
* Reads a 16 bit word(s) from the EEPROM using the EERD register.
|
||||
* Reads a 16 bit word(s) from the EEPROM using the EERD register.
|
||||
**/
|
||||
s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
|
||||
u16 offset, u16 words, u16 *data)
|
||||
@ -438,12 +438,12 @@ s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
* ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
*
|
||||
* Write a 16 bit word to the EEPROM using the EEWR register.
|
||||
* Write a 16 bit word to the EEPROM using the EEWR register.
|
||||
**/
|
||||
s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
|
||||
{
|
||||
@ -462,13 +462,13 @@ s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @words: number of words
|
||||
* @data: word(s) write to the EEPROM
|
||||
* ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @words: number of words
|
||||
* @data: word(s) write to the EEPROM
|
||||
*
|
||||
* Write a 16 bit word(s) to the EEPROM using the EEWR register.
|
||||
* Write a 16 bit word(s) to the EEPROM using the EEWR register.
|
||||
**/
|
||||
s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
|
||||
u16 offset, u16 words, u16 *data)
|
||||
@ -489,14 +489,14 @@ s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
|
||||
* ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
|
||||
*
|
||||
* This function does not use synchronization for EERD and EEWR. It can
|
||||
* be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
|
||||
* This function does not use synchronization for EERD and EEWR. It can
|
||||
* be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
|
||||
*
|
||||
* @hw: pointer to hardware structure
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
**/
|
||||
s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -567,12 +567,12 @@ s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @checksum_val: calculated checksum
|
||||
* ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @checksum_val: calculated checksum
|
||||
*
|
||||
* Performs checksum calculation and validates the EEPROM checksum. If the
|
||||
* caller does not need checksum_val, the value can be NULL.
|
||||
* Performs checksum calculation and validates the EEPROM checksum. If the
|
||||
* caller does not need checksum_val, the value can be NULL.
|
||||
**/
|
||||
s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
|
||||
u16 *checksum_val)
|
||||
@ -679,11 +679,11 @@ s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
|
||||
* EEPROM from shadow RAM to the flash device.
|
||||
* Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
|
||||
* EEPROM from shadow RAM to the flash device.
|
||||
**/
|
||||
s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -726,11 +726,11 @@ s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_poll_flash_update_done_X540 - Poll flash update status
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_poll_flash_update_done_X540 - Poll flash update status
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Polls the FLUDONE (bit 26) of the EEC Register to determine when the
|
||||
* flash update is done.
|
||||
* Polls the FLUDONE (bit 26) of the EEC Register to determine when the
|
||||
* flash update is done.
|
||||
**/
|
||||
static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -757,12 +757,12 @@ static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
* ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
*
|
||||
* Acquires the SWFW semaphore thought the SW_FW_SYNC register for
|
||||
* the specified function (CSR, PHY0, PHY1, NVM, Flash)
|
||||
* Acquires the SWFW semaphore thought the SW_FW_SYNC register for
|
||||
* the specified function (CSR, PHY0, PHY1, NVM, Flash)
|
||||
**/
|
||||
s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -854,12 +854,12 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
* ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
*
|
||||
* Releases the SWFW semaphore through the SW_FW_SYNC register
|
||||
* for the specified function (CSR, PHY0, PHY1, EVM, Flash)
|
||||
* Releases the SWFW semaphore through the SW_FW_SYNC register
|
||||
* for the specified function (CSR, PHY0, PHY1, EVM, Flash)
|
||||
**/
|
||||
void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -881,10 +881,10 @@ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Sets the hardware semaphores so SW/FW can gain control of shared resources
|
||||
* Sets the hardware semaphores so SW/FW can gain control of shared resources
|
||||
**/
|
||||
static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -939,10 +939,10 @@ static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* This function clears hardware semaphore bits.
|
||||
* This function clears hardware semaphore bits.
|
||||
**/
|
||||
static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -964,11 +964,11 @@ static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_swfw_sync_X540 - Release hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_swfw_sync_X540 - Release hardware semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* This function reset hardware semaphore bits for a semaphore that may
|
||||
* have be left locked due to a catastrophic failure.
|
||||
* This function reset hardware semaphore bits for a semaphore that may
|
||||
* have be left locked due to a catastrophic failure.
|
||||
**/
|
||||
void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -999,7 +999,7 @@ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw)
|
||||
* @index: led number to blink
|
||||
*
|
||||
* Devices that implement the version 2 interface:
|
||||
* X540
|
||||
* X540
|
||||
**/
|
||||
s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
|
||||
{
|
||||
@ -1040,7 +1040,7 @@ s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
|
||||
* @index: led number to stop blinking
|
||||
*
|
||||
* Devices that implement the version 2 interface:
|
||||
* X540
|
||||
* X540
|
||||
**/
|
||||
s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
|
||||
{
|
||||
|
||||
@ -45,11 +45,11 @@ static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask);
|
||||
static s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw);
|
||||
|
||||
/**
|
||||
* ixgbe_init_ops_X550 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_ops_X550 - Inits func ptrs and MAC type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize the function pointers and assign the MAC type for X550.
|
||||
* Does not touch the hardware.
|
||||
* Initialize the function pointers and assign the MAC type for X550.
|
||||
* Does not touch the hardware.
|
||||
**/
|
||||
s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -750,7 +750,7 @@ static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw)
|
||||
* ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Called at init time to set up flow control.
|
||||
* Called at init time to set up flow control.
|
||||
*/
|
||||
static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -876,11 +876,11 @@ s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_dmac_config_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_dmac_config_X550
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Configure DMA coalescing. If enabling dmac, dmac is activated.
|
||||
* When disabling dmac, dmac enable dmac bit is cleared.
|
||||
* Configure DMA coalescing. If enabling dmac, dmac is activated.
|
||||
* When disabling dmac, dmac enable dmac bit is cleared.
|
||||
**/
|
||||
s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -924,11 +924,11 @@ s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_dmac_config_tcs_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_dmac_config_tcs_X550
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Configure DMA coalescing threshold per TC. The dmac enable bit must
|
||||
* be cleared before configuring.
|
||||
* Configure DMA coalescing threshold per TC. The dmac enable bit must
|
||||
* be cleared before configuring.
|
||||
**/
|
||||
s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -980,10 +980,10 @@ s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_dmac_update_tcs_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_dmac_update_tcs_X550
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Disables dmac, updates per TC settings, and then enables dmac.
|
||||
* Disables dmac, updates per TC settings, and then enables dmac.
|
||||
**/
|
||||
s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1007,11 +1007,11 @@ s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
|
||||
* ixgbe_hw struct in order to set up EEPROM access.
|
||||
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
|
||||
* ixgbe_hw struct in order to set up EEPROM access.
|
||||
**/
|
||||
s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1066,10 +1066,10 @@ void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
|
||||
* @hw: pointer to hardware structure
|
||||
* @enable: enable or disable switch for Ethertype anti-spoofing
|
||||
* @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
|
||||
* ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
|
||||
* @hw: pointer to hardware structure
|
||||
* @enable: enable or disable switch for Ethertype anti-spoofing
|
||||
* @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
|
||||
*
|
||||
**/
|
||||
void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
|
||||
@ -1124,12 +1124,12 @@ static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register
|
||||
* of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Data to write to the register
|
||||
* ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register
|
||||
* of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Data to write to the register
|
||||
**/
|
||||
s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u32 data)
|
||||
@ -1171,11 +1171,11 @@ s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Pointer to read data from the register
|
||||
* ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Pointer to read data from the register
|
||||
**/
|
||||
s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u32 *data)
|
||||
@ -1285,12 +1285,12 @@ s32 ixgbe_put_phy_token(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
|
||||
* of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Data to write to the register
|
||||
* ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register
|
||||
* of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Data to write to the register
|
||||
**/
|
||||
s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u32 data)
|
||||
@ -1316,11 +1316,11 @@ s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Pointer to read data from the register
|
||||
* ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 3 bit device type
|
||||
* @data: Pointer to read data from the register
|
||||
**/
|
||||
s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u32 *data)
|
||||
@ -1351,10 +1351,10 @@ s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_disable_mdd_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_disable_mdd_X550
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Disable malicious driver detection
|
||||
* Disable malicious driver detection
|
||||
**/
|
||||
void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1374,10 +1374,10 @@ void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_enable_mdd_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_enable_mdd_X550
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Enable malicious driver detection
|
||||
* Enable malicious driver detection
|
||||
**/
|
||||
void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1397,11 +1397,11 @@ void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_restore_mdd_vf_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* @vf: vf index
|
||||
* ixgbe_restore_mdd_vf_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* @vf: vf index
|
||||
*
|
||||
* Restore VF that was disabled during malicious driver detection event
|
||||
* Restore VF that was disabled during malicious driver detection event
|
||||
**/
|
||||
void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
|
||||
{
|
||||
@ -1437,11 +1437,11 @@ void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_mdd_event_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* @vf_bitmap: vf bitmap of malicious vfs
|
||||
* ixgbe_mdd_event_X550
|
||||
* @hw: pointer to hardware structure
|
||||
* @vf_bitmap: vf bitmap of malicious vfs
|
||||
*
|
||||
* Handle malicious driver detection event.
|
||||
* Handle malicious driver detection event.
|
||||
**/
|
||||
void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
|
||||
{
|
||||
@ -1494,10 +1494,10 @@ void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_media_type_X550em - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_media_type_X550em - Get media type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
* Returns the media type (fiber, copper, backplane)
|
||||
*/
|
||||
enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1543,9 +1543,9 @@ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
|
||||
* @hw: pointer to hardware structure
|
||||
* @linear: true if SFP module is linear
|
||||
* ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
|
||||
* @hw: pointer to hardware structure
|
||||
* @linear: true if SFP module is linear
|
||||
*/
|
||||
static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
|
||||
{
|
||||
@ -1579,10 +1579,10 @@ static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_identify_sfp_module_X550em - Identifies SFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_identify_sfp_module_X550em - Identifies SFP modules
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Searches for and identifies the SFP module and assigns appropriate PHY type.
|
||||
* Searches for and identifies the SFP module and assigns appropriate PHY type.
|
||||
**/
|
||||
s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1603,8 +1603,8 @@ s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
|
||||
* @hw: pointer to hardware structure
|
||||
*/
|
||||
s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1815,8 +1815,8 @@ static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_mac_link_ops_X550em - init mac link function pointers
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_mac_link_ops_X550em - init mac link function pointers
|
||||
* @hw: pointer to hardware structure
|
||||
*/
|
||||
void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -1873,10 +1873,10 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_link_capabilities_x550em - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
* ixgbe_get_link_capabilities_x550em - Determines link capabilities
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: pointer to link speed
|
||||
* @autoneg: true when autoneg or autotry is enabled
|
||||
*/
|
||||
s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed *speed,
|
||||
@ -1953,7 +1953,7 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
|
||||
* ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
|
||||
* @hw: pointer to hardware structure
|
||||
* @lsc: pointer to boolean flag which indicates whether external Base T
|
||||
* PHY interrupt is lsc
|
||||
* PHY interrupt is lsc
|
||||
*
|
||||
* Determime if external Base T PHY interrupt cause is high temperature
|
||||
* failure alarm or link status change.
|
||||
@ -2139,11 +2139,11 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: link speed
|
||||
* ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: link speed
|
||||
*
|
||||
* Configures the integrated KR PHY.
|
||||
* Configures the integrated KR PHY.
|
||||
**/
|
||||
static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed)
|
||||
@ -2241,11 +2241,11 @@ static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Read NW_MNG_IF_SEL register and save field values, and check for valid field
|
||||
* values.
|
||||
* Read NW_MNG_IF_SEL register and save field values, and check for valid field
|
||||
* values.
|
||||
**/
|
||||
static s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2268,12 +2268,12 @@ static s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_init_phy_ops_X550em - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_init_phy_ops_X550em - PHY/SFP specific init
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
* Initialize any function pointers that were not able to be
|
||||
* set during init_shared_code because the PHY/SFP type was
|
||||
* not known. Perform the SFP init if necessary.
|
||||
*/
|
||||
s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2390,7 +2390,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
|
||||
|
||||
/**
|
||||
* ixgbe_set_mdio_speed - Set MDIO clock speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @hw: pointer to hardware structure
|
||||
*/
|
||||
static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2421,12 +2421,12 @@ static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_hw_X550em - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_hw_X550em - Perform hardware reset
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
|
||||
* reset.
|
||||
* Resets the hardware by resetting the transmit and receive units, masks
|
||||
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
|
||||
* reset.
|
||||
*/
|
||||
s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2601,8 +2601,8 @@ s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_kr_x550em - Configure the KR PHY.
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_kr_x550em - Configure the KR PHY.
|
||||
* @hw: pointer to hardware structure
|
||||
**/
|
||||
s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2617,12 +2617,12 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
* ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
*
|
||||
* Configure the external PHY and the integrated KR PHY for SFP support.
|
||||
* Configure the external PHY and the integrated KR PHY for SFP support.
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -2662,12 +2662,12 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: the link speed to force
|
||||
* ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: the link speed to force
|
||||
*
|
||||
* Configures the integrated PHY for native SFI mode. Used to connect the
|
||||
* internal PHY directly to an SFP cage, without autonegotiation.
|
||||
* Configures the integrated PHY for native SFI mode. Used to connect the
|
||||
* internal PHY directly to an SFP cage, without autonegotiation.
|
||||
**/
|
||||
static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
|
||||
{
|
||||
@ -2711,12 +2711,12 @@ static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
* ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: new link speed
|
||||
* @autoneg_wait_to_complete: unused
|
||||
*
|
||||
* Configure the the integrated PHY for SFP support.
|
||||
* Configure the the integrated PHY for SFP support.
|
||||
**/
|
||||
s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
|
||||
ixgbe_link_speed speed,
|
||||
@ -2816,10 +2816,10 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* iXfI configuration needed for ixgbe_mac_X550EM_x devices.
|
||||
* iXfI configuration needed for ixgbe_mac_X550EM_x devices.
|
||||
**/
|
||||
static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -2885,12 +2885,12 @@ static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: the link speed to force
|
||||
* ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
|
||||
* @hw: pointer to hardware structure
|
||||
* @speed: the link speed to force
|
||||
*
|
||||
* Configures the integrated KR PHY to use iXFI mode. Used to connect an
|
||||
* internal and external PHY at a specific speed, without autonegotiation.
|
||||
* Configures the integrated KR PHY to use iXFI mode. Used to connect an
|
||||
* internal and external PHY at a specific speed, without autonegotiation.
|
||||
**/
|
||||
static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
|
||||
{
|
||||
@ -3046,10 +3046,10 @@ s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Configures the integrated KR PHY to use internal loopback mode.
|
||||
* Configures the integrated KR PHY to use internal loopback mode.
|
||||
**/
|
||||
s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -3113,13 +3113,13 @@ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
|
||||
* assuming that the semaphore is already obtained.
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
* ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
|
||||
* assuming that the semaphore is already obtained.
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @data: word read from the EEPROM
|
||||
*
|
||||
* Reads a 16 bit word from the EEPROM using the hostif.
|
||||
* Reads a 16 bit word from the EEPROM using the hostif.
|
||||
**/
|
||||
s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
|
||||
{
|
||||
@ -3157,13 +3157,13 @@ s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
* ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to read
|
||||
* @words: number of words
|
||||
* @data: word(s) read from the EEPROM
|
||||
*
|
||||
* Reads a 16 bit word(s) from the EEPROM using the hostif.
|
||||
* Reads a 16 bit word(s) from the EEPROM using the hostif.
|
||||
**/
|
||||
s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
|
||||
u16 offset, u16 words, u16 *data)
|
||||
@ -3233,12 +3233,12 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
*
|
||||
* Write a 16 bit word to the EEPROM using the hostif.
|
||||
* Write a 16 bit word to the EEPROM using the hostif.
|
||||
**/
|
||||
s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
|
||||
u16 data)
|
||||
@ -3277,12 +3277,12 @@ s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
* ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @data: word write to the EEPROM
|
||||
*
|
||||
* Write a 16 bit word to the EEPROM using the hostif.
|
||||
* Write a 16 bit word to the EEPROM using the hostif.
|
||||
**/
|
||||
s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
|
||||
u16 data)
|
||||
@ -3304,13 +3304,13 @@ s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @words: number of words
|
||||
* @data: word(s) write to the EEPROM
|
||||
* ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
|
||||
* @hw: pointer to hardware structure
|
||||
* @offset: offset of word in the EEPROM to write
|
||||
* @words: number of words
|
||||
* @data: word(s) write to the EEPROM
|
||||
*
|
||||
* Write a 16 bit word(s) to the EEPROM using the hostif.
|
||||
* Write a 16 bit word(s) to the EEPROM using the hostif.
|
||||
**/
|
||||
s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
|
||||
u16 offset, u16 words, u16 *data)
|
||||
@ -3416,12 +3416,12 @@ static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_calc_checksum_X550 - Calculates and returns the checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @buffer: pointer to buffer containing calculated checksum
|
||||
* @buffer_size: size of buffer
|
||||
* ixgbe_calc_checksum_X550 - Calculates and returns the checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @buffer: pointer to buffer containing calculated checksum
|
||||
* @buffer_size: size of buffer
|
||||
*
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
**/
|
||||
s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
|
||||
{
|
||||
@ -3499,10 +3499,10 @@ s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
* Returns a negative error code on error, or the 16-bit checksum
|
||||
**/
|
||||
s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -3510,12 +3510,12 @@ s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @checksum_val: calculated checksum
|
||||
* ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
|
||||
* @hw: pointer to hardware structure
|
||||
* @checksum_val: calculated checksum
|
||||
*
|
||||
* Performs checksum calculation and validates the EEPROM checksum. If the
|
||||
* caller does not need checksum_val, the value can be NULL.
|
||||
* Performs checksum calculation and validates the EEPROM checksum. If the
|
||||
* caller does not need checksum_val, the value can be NULL.
|
||||
**/
|
||||
s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
|
||||
{
|
||||
@ -3604,10 +3604,10 @@ s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
|
||||
* Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
|
||||
**/
|
||||
s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -3629,10 +3629,10 @@ s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
* Determines physical layer capabilities of the current configuration.
|
||||
**/
|
||||
u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -3767,7 +3767,7 @@ void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
|
||||
|
||||
/**
|
||||
* ixgbe_enter_lplu_x550em - Transition to low power states
|
||||
* @hw: pointer to hardware structure
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Configures Low Power Link Up on transition to low power states
|
||||
* (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
|
||||
@ -3875,8 +3875,8 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
|
||||
|
||||
/**
|
||||
* ixgbe_get_lcd_x550em - Determine lowest common denominator
|
||||
* @hw: pointer to hardware structure
|
||||
* @lcd_speed: pointer to lowest common link speed
|
||||
* @hw: pointer to hardware structure
|
||||
* @lcd_speed: pointer to lowest common link speed
|
||||
*
|
||||
* Determine lowest common link speed with link partner.
|
||||
**/
|
||||
@ -3912,10 +3912,10 @@ s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_fc_X550em - Set up flow control
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_fc_X550em - Set up flow control
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Called at init time to set up flow control.
|
||||
* Called at init time to set up flow control.
|
||||
**/
|
||||
s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -4002,10 +4002,10 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Enable flow control according to IEEE clause 37.
|
||||
* Enable flow control according to IEEE clause 37.
|
||||
**/
|
||||
void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -4080,8 +4080,8 @@ void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
**/
|
||||
void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
|
||||
@ -4091,10 +4091,10 @@ void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Enable flow control according to IEEE clause 37.
|
||||
* Enable flow control according to IEEE clause 37.
|
||||
**/
|
||||
void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -4146,10 +4146,10 @@ void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_setup_fc_backplane_x550em_a - Set up flow control
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_setup_fc_backplane_x550em_a - Set up flow control
|
||||
* @hw: pointer to hardware structure
|
||||
*
|
||||
* Called at init time to set up flow control.
|
||||
* Called at init time to set up flow control.
|
||||
**/
|
||||
s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -4254,11 +4254,11 @@ static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
* ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
*
|
||||
* Acquires the SWFW semaphore and sets the I2C MUX
|
||||
* Acquires the SWFW semaphore and sets the I2C MUX
|
||||
**/
|
||||
s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -4277,11 +4277,11 @@ s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
* ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
*
|
||||
* Releases the SWFW semaphore and sets the I2C MUX
|
||||
* Releases the SWFW semaphore and sets the I2C MUX
|
||||
**/
|
||||
void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -4294,11 +4294,11 @@ void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
* ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to acquire
|
||||
*
|
||||
* Acquires the SWFW semaphore and get the shared phy token as needed
|
||||
* Acquires the SWFW semaphore and get the shared phy token as needed
|
||||
*/
|
||||
static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -4344,11 +4344,11 @@ static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
* ixgbe_release_swfw_sync_X550a - Release SWFW semaphore
|
||||
* @hw: pointer to hardware structure
|
||||
* @mask: Mask to specify which semaphore to release
|
||||
*
|
||||
* Releases the SWFW semaphore and puts the shared phy token as needed
|
||||
* Releases the SWFW semaphore and puts the shared phy token as needed
|
||||
*/
|
||||
static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
|
||||
{
|
||||
@ -4364,15 +4364,15 @@ static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_read_phy_reg_x550a - Reads specified PHY register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
* ixgbe_read_phy_reg_x550a - Reads specified PHY register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit address of PHY register to read
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Pointer to read data from PHY register
|
||||
*
|
||||
* Reads a value from a specified PHY register using the SWFW lock and PHY
|
||||
* Token. The PHY Token is needed since the MDIO is shared between to MAC
|
||||
* instances.
|
||||
* Reads a value from a specified PHY register using the SWFW lock and PHY
|
||||
* Token. The PHY Token is needed since the MDIO is shared between to MAC
|
||||
* instances.
|
||||
**/
|
||||
s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u16 *phy_data)
|
||||
@ -4393,14 +4393,14 @@ s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_write_phy_reg_x550a - Writes specified PHY register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
* ixgbe_write_phy_reg_x550a - Writes specified PHY register
|
||||
* @hw: pointer to hardware structure
|
||||
* @reg_addr: 32 bit PHY register to write
|
||||
* @device_type: 5 bit device type
|
||||
* @phy_data: Data to write to the PHY register
|
||||
*
|
||||
* Writes a value to specified PHY register using the SWFW lock and PHY Token.
|
||||
* The PHY Token is needed since the MDIO is shared between to MAC instances.
|
||||
* Writes a value to specified PHY register using the SWFW lock and PHY Token.
|
||||
* The PHY Token is needed since the MDIO is shared between to MAC instances.
|
||||
**/
|
||||
s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
|
||||
u32 device_type, u16 phy_data)
|
||||
@ -4551,8 +4551,8 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
|
||||
* @hw: pointer to hardware structure
|
||||
* ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
|
||||
* @hw: pointer to hardware structure
|
||||
**/
|
||||
s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
|
||||
{
|
||||
@ -4568,9 +4568,9 @@ s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
|
||||
* @hw: pointer to hardware structure
|
||||
* @led_idx: led number to turn on
|
||||
* ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
|
||||
* @hw: pointer to hardware structure
|
||||
* @led_idx: led number to turn on
|
||||
**/
|
||||
s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
|
||||
{
|
||||
@ -4593,9 +4593,9 @@ s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
|
||||
* @hw: pointer to hardware structure
|
||||
* @led_idx: led number to turn off
|
||||
* ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
|
||||
* @hw: pointer to hardware structure
|
||||
* @led_idx: led number to turn off
|
||||
**/
|
||||
s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
|
||||
{
|
||||
@ -4618,19 +4618,19 @@ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
|
||||
}
|
||||
|
||||
/**
|
||||
* ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware
|
||||
* @hw: pointer to the HW structure
|
||||
* @maj: driver version major number
|
||||
* @min: driver version minor number
|
||||
* @build: driver version build number
|
||||
* @sub: driver version sub build number
|
||||
* @len: length of driver_ver string
|
||||
* @driver_ver: driver string
|
||||
* ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware
|
||||
* @hw: pointer to the HW structure
|
||||
* @maj: driver version major number
|
||||
* @min: driver version minor number
|
||||
* @build: driver version build number
|
||||
* @sub: driver version sub build number
|
||||
* @len: length of driver_ver string
|
||||
* @driver_ver: driver string
|
||||
*
|
||||
* Sends driver version number to firmware through the manageability
|
||||
* block. On success return IXGBE_SUCCESS
|
||||
* else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
|
||||
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
|
||||
* Sends driver version number to firmware through the manageability
|
||||
* block. On success return IXGBE_SUCCESS
|
||||
* else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
|
||||
* semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
|
||||
**/
|
||||
s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
|
||||
u8 build, u8 sub, u16 len, const char *driver_ver)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user