conditionalise some warning messages

Submitted by:	Vladimir N.Silyaev <vns@delta.odessa.ua>
This commit is contained in:
cg 1999-12-05 20:25:29 +00:00
parent fd40eb3b2f
commit 56513d3951

View File

@ -415,7 +415,7 @@ mss_init(struct mss_info *mss, device_t dev)
mss->opti_offset =
(rman_get_start(mss->conf_base) & ~3) + 2
- rman_get_start(mss->conf_base);
printf("mss_init: opti_offset=%d\n", mss->opti_offset);
BVDDB(printf("mss_init: opti_offset=%d\n", mss->opti_offset));
opti_wr(mss, 4, 0xd6); /* fifo empty, OPL3, audio enable, SB3.2 */
ad_write(mss, 10, 2); /* enable interrupts */
opti_wr(mss, 6, 2); /* MCIR6: mss enable, sb disable */
@ -1012,9 +1012,10 @@ mss_intr(void *arg)
if (FULL_DUPLEX(mss)) ad_write(mss, 24, ~c); /* ack selectively */
else io_wr(mss, MSS_STATUS, 0); /* Clear interrupt status */
}
if (i == 10) printf("mss_intr: irq, but not from mss\n");
else if (served == 0) {
printf("mss_intr: unexpected irq with reason %x\n", c);
if (i == 10) {
BVDDB(printf("mss_intr: irq, but not from mss\n"));
} else if (served == 0) {
BVDDB(printf("mss_intr: unexpected irq with reason %x\n", c));
/*
* this should not happen... I have no idea what to do now.
* maybe should do a sanity check and restart dmas ?
@ -1137,7 +1138,7 @@ ad_leave_MCE(struct mss_info *mss)
u_char prev;
if ((mss->bd_flags & BD_F_MCE_BIT) == 0) {
printf("--- hey, leave_MCE: MCE bit was not set!\n");
DEB(printf("--- hey, leave_MCE: MCE bit was not set!\n"));
return;
}
@ -1339,8 +1340,8 @@ mss_trigger(struct mss_chinfo *ch, int go)
ad_write(mss, 9, m);
if (ad_read(mss, 9) == m) break;
}
if (retry == 0) printf("start dma, failed to set bit 0x%02x 0x%02x\n",
m, ad_read(mss, 9));
if (retry == 0) BVDDB(printf("stop dma, failed to set bit 0x%02x 0x%02x\n", \
m, ad_read(mss, 9)));
return 0;
}
@ -1505,7 +1506,7 @@ opti931_intr(void *arg)
#if 0
reason = io_rd(mss, MSS_STATUS);
if (!(reason & 1)) {/* no int, maybe a shared line ? */
printf("intr: flag 0, mcir11 0x%02x\n", ad_read(mss, 11));
DEB(printf("intr: flag 0, mcir11 0x%02x\n", ad_read(mss, 11)));
return;
}
#endif
@ -1522,8 +1523,8 @@ opti931_intr(void *arg)
DEB(printf("Warning: MPU interrupt\n");)
mc11 |= 0x20;
}
if (mc11 & masked) printf("irq reset failed, mc11 0x%02x, 0x%02x\n",
mc11, masked);
if (mc11 & masked) BVDDB(printf("irq reset failed, mc11 0x%02x, 0x%02x\n",\
mc11, masked));
masked |= mc11;
/*
* the nice OPTi931 sets the IRQ line before setting the bits in
@ -1536,7 +1537,7 @@ opti931_intr(void *arg)
if (--loops) goto again;
else DDB(printf("intr, but mc11 not set\n");)
}
if (loops == 0) printf("intr, nothing in mcir11 0x%02x\n", mc11);
if (loops == 0) BVDDB(printf("intr, nothing in mcir11 0x%02x\n", mc11));
return;
}