d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add (disabled) sample configuration lines needed to enable snmp_target(3) module

Browse Source 
and configure minimal target addresses & notifications needed for bsnmpd(1)
to send SNMPv3 notifications.

Sponsored by:	The FreeBSD Foundation
Reviewed by:	philip
Approved by:	philip
This commit is contained in:
Shteryana Shopova 2010-12-20 17:28:15 +00:00
parent 72cd7a520d
commit 5b56d5b347
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=216595
1 changed files with 98 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

133
etc/snmpd.config
View File

@ -28,7 +28,10 @@ read := "public"
write := "geheim"
trap := "mytrap"
#
# Declarations for SNMP-USER-BASED-SM-MIB authentication and privacy options
#
NoAuthProtocol := 1.3.6.1.6.3.10.1.1.1
HMACMD5AuthProtocol := 1.3.6.1.6.3.10.1.1.2
HMACSHAAuthProtocol := 1.3.6.1.6.3.10.1.1.3
@ -37,16 +40,36 @@ DESPrivProtocol := 1.3.6.1.6.3.10.1.2.2
AesCfb128Protocol := 1.3.6.1.6.3.10.1.2.4
#
# Enumerations from SNMP-FRAMEWORK-MIB
#
# Security models
securityModelAny := 0
securityModelSNMPv1 := 1
securityModelSNMPv2c := 2
securityModelUSM := 3
# Message Processing models
MPmodelSNMPv1 := 0
MPmodelSNMPv2c := 1
MPmodelSNMPv3 := 3
# Security levels
noAuthNoPriv := 1
authNoPriv := 2
authPriv := 3
# SNMPv3 USM User definition
#
# The localized hex password for a user may be obtained by setting SNMPUSER, SNMPPASSWD,
# SNMPAUTH and SNMPPRIV environment variables to the desired parameters and invoking
# 'bsnmpget -v 3 -D -K -o verbose' against the running bsnmpd(1). For other
# usages refer to the bsnmpget(1) manual page. The following lines define a user "bsnmp"
# with a private password "bsnmp", localized for the above engine ID.
# with a private password "bsnmptest", localized for the above engine ID.
#
# user1 := "bsnmp"
# user1passwd := 0x1b:0x6d:0x9e:0x94:0xbe:0x19:0x17:0xfb:0xde:0x60:0x46:0xfe:0x59:0x6f:0x61:0x95:0xf2:0xc9:0x57:0x1f
#user1 := "bsnmp"
#user1passwd := 0x22:0x98:0x1a:0x6e:0x39:0x93:0x16:0x5e:0x6a:0x21:0x1b:0xd8:0xa9:0x81:0x31:0x05:0x16:0x33:0x38:0x60
#
# Configuration
@ -89,17 +112,6 @@ sysObjectId = 1.3.6.1.4.1.12325.1.1.2.1.$(system)
snmpEnableAuthenTraps = 2
#
# Load MIB-2 module
#
begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
# Force a polling rate for the 64-bit interface counters in case
# the automatic computation is wrong (which may be the case if an interface
# announces the wrong bit rate via its MIB).
#%mibII
#begemotIfForcePoll = 2000
#
# SNMPv3 User-based security module - must be loaded for SNMPv3 USM
#
@ -145,18 +157,18 @@ begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
#%vacm
# Definition of a SNMPv1 group
# vacmSecurityToGroupStatus.1.$(read) = 4
# vacmGroupName.1.$(read) = $(read)
# vacmSecurityToGroupStatus.$(securityModelSNMPv1).$(read) = 4
# vacmGroupName.$(securityModelSNMPv1).$(read) = $(read)
# Definition of SNMPv2 group
# vacmSecurityToGroupStatus.2.$(write) = 4
# vacmGroupName.2.$(write) = $(write)
# vacmSecurityToGroupStatus.$(securityModelSNMPv2c).$(write) = 4
# vacmGroupName.$(securityModelSNMPv2c).$(write) = $(write)
# Definition of SNMPv3 group with users "bsnmp" and "public"
# vacmSecurityToGroupStatus.3.$(user1) = 4
# vacmGroupName.3.$(user1) = $(write)
# vacmSecurityToGroupStatus.3.$(read) = 4
# vacmGroupName.3.$(read) = $(write)
# vacmSecurityToGroupStatus.$(securityModelUSM).$(user1) = 4
# vacmGroupName.$(securityModelUSM).$(user1) = $(write)
# vacmSecurityToGroupStatus.$(securityModelUSM).$(read) = 4
# vacmGroupName.$(securityModelUSM).$(read) = $(write)
#
# The OID of the .iso.org.dod.internet subtree
@ -164,11 +176,6 @@ begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
# internetoid := 1.3.6.1
# internetoidlen := 4
# Enumerated values for the privacy options
# noAuthNoPriv := 1
# authNoPriv := 2
# authPriv := 3
#
# Definitions of two views
#
@ -182,23 +189,23 @@ begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
#
# Read-only access for SNMPv1 users
#
# vacmAccessStatus.$(read)."".1.1 = 4
# vacmAccessReadViewName.$(read)."".1.1 = "internet"
# vacmAccessStatus.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = "internet"
#
# Read-write access for SNMPv2 users
#
# vacmAccessStatus.$(write)."".2.1 = 4
# vacmAccessReadViewName.$(write)."".2.1 = "internet"
# vacmAccessWriteViewName.$(write)."".2.1 = "internet"
# vacmAccessStatus.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
#
# Read-write-notify access for SNMPv3 USM users with noAuthNoPriv
#
# vacmAccessStatus.$(write)."".3.$(noAuthNoPriv) = 4
# vacmAccessReadViewName.$(write)."".3.$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".3.$(noAuthNoPriv) = "internet"
# vacmAccessNotifyViewName.$(write)."".3.$(noAuthNoPriv) = "internet"
# vacmAccessReadViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
# vacmAccessWriteViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
# vacmAccessNotifyViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
#
#Read-write-notify access to restricted for SNMPv3 USM users with authPriv
@ -208,6 +215,62 @@ begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
# vacmAccessWriteViewName.$(write)."".3.$(authPriv) = "restricted"
# vacmAccessNotifyViewName.$(write)."".3.$(authPriv) = "restricted"
#
# SNMPv3 Notification Targets
#
# begemotSnmpdModulePath."target" = "/usr/lib/snmp_target.so"
#%target
# Send notifications to target tag "test"
# tag := "test"
# snmpNotifyRowStatus.$(tag) = 4
# snmpNotifyTag.$(tag) = $(tag)
# tagremote := "testremote"
# snmpNotifyRowStatus.$(tagremote) = 4
# snmpNotifyTag.$(tagremote) = $(tagremote)
#
# Specify the target parameters for the notifications - send with the credentials
# of user "bsnmp"
#
# snmpTargetParamsRowStatus.$(tag) = 5
# snmpTargetParamsMPModel.$(tag) = $(MPmodelSNMPv3)
# snmpTargetParamsSecurityModel.$(tag) = $(securityModelUSM)
# snmpTargetParamsSecurityName.$(tag) = $(user1)
# snmpTargetParamsSecurityLevel.$(tag) = $(authPriv)
# snmpTargetParamsRowStatus.$(tag) = 1
#
# Define the notifications' target address - port 162 on localhost
#
# snmpTargetAddrRowStatus.$(tag) = 5
# snmpTargetAddrTAddress.$(tag) = 0x7f:0x0:0x0:0x1:0x0:0xa2
# snmpTargetAddrTagList.$(tag) = "test notification"
# snmpTargetAddrParams.$(tag) = $(tag)
# snmpTargetAddrRowStatus.$(tag) = 1
#
# Define the notifications' target address - port 162 on 10.0.0.1
#
# snmpTargetAddrRowStatus.$(tagremote) = 5
# snmpTargetAddrTAddress.$(tagremote) = 0x0a:0x00:0x00:0x1:0x0:0xa2
# snmpTargetAddrTagList.$(tagremote) = $(tagremote)
# snmpTargetAddrParams.$(tagremote) = $(tag)
# snmpTargetAddrRowStatus.$(tagremote) = 1
#
# Load MIB-2 module
#
begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so"
# Force a polling rate for the 64-bit interface counters in case
# the automatic computation is wrong (which may be the case if an interface
# announces the wrong bit rate via its MIB).
#%mibII
#begemotIfForcePoll = 2000
# Netgraph module
#
#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"