cxgbe(4): Update T4/5/6 firmwares to 1.24.11.0.

These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.

Note that the firmwares are not uuencoded any more.

MFH:		1 month
Sponsored by:	Chelsio Communications
This commit is contained in:
Navdeep Parhar 2019-12-10 07:45:10 +00:00
parent 00b6911b7f
commit 6f012c14bc
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=355579
12 changed files with 40 additions and 33856 deletions

View File

@ -1469,8 +1469,8 @@ t4fw.fwo optional cxgbe \
no-implicit-rule \
clean "t4fw.fwo"
t4fw.fw optional cxgbe \
dependency "$S/dev/cxgbe/firmware/t4fw-1.23.0.0.bin.uu" \
compile-with "${NORMAL_FW}" \
dependency "$S/dev/cxgbe/firmware/t4fw-1.24.11.0.bin" \
compile-with "${CP} ${.ALLSRC} ${.TARGET}" \
no-obj no-implicit-rule \
clean "t4fw.fw"
t5fw_cfg.c optional cxgbe \
@ -1503,8 +1503,8 @@ t5fw.fwo optional cxgbe \
no-implicit-rule \
clean "t5fw.fwo"
t5fw.fw optional cxgbe \
dependency "$S/dev/cxgbe/firmware/t5fw-1.23.0.0.bin.uu" \
compile-with "${NORMAL_FW}" \
dependency "$S/dev/cxgbe/firmware/t5fw-1.24.11.0.bin" \
compile-with "${CP} ${.ALLSRC} ${.TARGET}" \
no-obj no-implicit-rule \
clean "t5fw.fw"
t6fw_cfg.c optional cxgbe \
@ -1537,8 +1537,8 @@ t6fw.fwo optional cxgbe \
no-implicit-rule \
clean "t6fw.fwo"
t6fw.fw optional cxgbe \
dependency "$S/dev/cxgbe/firmware/t6fw-1.23.0.0.bin.uu" \
compile-with "${NORMAL_FW}" \
dependency "$S/dev/cxgbe/firmware/t6fw-1.24.11.0.bin" \
compile-with "${CP} ${.ALLSRC} ${.TARGET}" \
no-obj no-implicit-rule \
clean "t6fw.fw"
dev/cxgbe/crypto/t4_crypto.c optional ccr \

File diff suppressed because it is too large Load Diff

Binary file not shown.

View File

@ -9938,20 +9938,20 @@ enum fw_hdr_chip {
(((x) >> S_FW_HDR_FW_VER_BUILD) & M_FW_HDR_FW_VER_BUILD)
enum {
T4FW_VERSION_MAJOR = 0x01,
T4FW_VERSION_MINOR = 0x17,
T4FW_VERSION_MICRO = 0x00,
T4FW_VERSION_BUILD = 0x00,
T4FW_VERSION_MAJOR = 1,
T4FW_VERSION_MINOR = 24,
T4FW_VERSION_MICRO = 11,
T4FW_VERSION_BUILD = 0,
T5FW_VERSION_MAJOR = 0x01,
T5FW_VERSION_MINOR = 0x17,
T5FW_VERSION_MICRO = 0x00,
T5FW_VERSION_BUILD = 0x00,
T5FW_VERSION_MAJOR = 1,
T5FW_VERSION_MINOR = 24,
T5FW_VERSION_MICRO = 11,
T5FW_VERSION_BUILD = 0,
T6FW_VERSION_MAJOR = 0x01,
T6FW_VERSION_MINOR = 0x17,
T6FW_VERSION_MICRO = 0x00,
T6FW_VERSION_BUILD = 0x00,
T6FW_VERSION_MAJOR = 1,
T6FW_VERSION_MINOR = 24,
T6FW_VERSION_MICRO = 11,
T6FW_VERSION_BUILD = 0,
};
enum {

File diff suppressed because it is too large Load Diff

Binary file not shown.

File diff suppressed because it is too large Load Diff

Binary file not shown.

View File

@ -95,12 +95,19 @@
sge_timer_value = 5, 10, 20, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread
# Set the SGE Doorbell Queue Timer "tick" to 5us and initialize
# Set the SGE Doorbell Queue Timer "tick" to 50us and initialize
# the Timer Table to a default set of values (which are multiples
# of the Timer Tick).
# of the Timer Tick). Note that the set of Tick Multipliers are
# NOT sorted. The Host Drivers are expected to pick amongst them
# for (Tick * Multiplier[i]) values which most closely match the Host
# Drivers' needs. Also, most Host Drivers will be default start
# start with (Tick * Multiplier[0]), so this gives us some flexibility
# in terms of picking a Tick and a default Multiplier somewhere in
# the middle of the achievable set of (Tick * Multiplier[i]) values.
# Thus, the below select for 150us by this default.
#
sge_dbq_timertick = 5
sge_dbq_timer = 1, 2, 3, 5, 7, 9, 12, 16
sge_dbq_timertick = 50
sge_dbq_timer = 3, 2, 1, 5, 7, 9, 12, 16
# enable TP_OUT_CONFIG.IPIDSPLITMODE
reg[0x7d04] = 0x00010000/0x00010000
@ -423,10 +430,10 @@
tp_l2t = 3072
tp_ddp = 2
tp_ddp_iscsi = 2
tp_tls_key = 3
tp_tls_key = 2
tp_tls_mxrxsize = 17408 # 16384 + 1024, governs max rx data, pm max xfer len, rx coalesce sizes
tp_stag = 2
tp_pbl = 5
tp_pbl = 7
tp_rq = 7
tp_srq = 128
@ -471,7 +478,7 @@
nhash = 2048
tp_l2t = 4
protocol = fcoe_initiator
tp_ddp = 2
tp_ddp = 1
fcoe_nfcf = 16
fcoe_nvnp = 32
fcoe_nssn = 1024
@ -581,7 +588,7 @@
[fini]
version = 0x1425001d
checksum = 0xdbff9437
checksum = 0x14a022cd
# Total resources used by above allocations:
# Virtual Interfaces: 104
@ -592,4 +599,4 @@
# Virtual Functions: 64
#
# $FreeBSD$
#
#

View File

@ -17,11 +17,7 @@ FIRMWS+= ${F}:${F:C/.txt//}:1.0.0.0
.endif
.endfor
T4FW_VER= 1.23.0.0
FIRMWS+= t4fw.fw:t4fw:${T4FW_VER}
CLEANFILES+= t4fw.fw
t4fw.fw: t4fw-${T4FW_VER}.bin.uu
uudecode -o ${.TARGET} ${.ALLSRC}
T4FW_VER= 1.24.11.0
FIRMWS+= t4fw-${T4FW_VER}.bin:t4fw:${T4FW_VER}
.include <bsd.kmod.mk>

View File

@ -17,11 +17,7 @@ FIRMWS+= ${F}:${F:C/.txt//}:1.0.0.0
.endif
.endfor
T5FW_VER= 1.23.0.0
FIRMWS+= t5fw.fw:t5fw:${T5FW_VER}
CLEANFILES+= t5fw.fw
t5fw.fw: t5fw-${T5FW_VER}.bin.uu
uudecode -o ${.TARGET} ${.ALLSRC}
T5FW_VER= 1.24.11.0
FIRMWS+= t5fw-${T5FW_VER}.bin:t5fw:${T5FW_VER}
.include <bsd.kmod.mk>

View File

@ -17,11 +17,7 @@ FIRMWS+= ${F}:${F:C/.txt//}:1.0.0.0
.endif
.endfor
T6FW_VER= 1.23.0.0
FIRMWS+= t6fw.fw:t6fw:${T6FW_VER}
CLEANFILES+= t6fw.fw
t6fw.fw: t6fw-${T6FW_VER}.bin.uu
uudecode -o ${.TARGET} ${.ALLSRC}
T6FW_VER= 1.24.11.0
FIRMWS+= t6fw-${T6FW_VER}.bin:t6fw:${T6FW_VER}
.include <bsd.kmod.mk>