d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Do the obvious thing: when the interface is downed, power off the card.

Browse Source 
When up'ed again: reapply power.  This means that you can leave your card
in, you don't need to reboot to avoid the power drain.
This commit is contained in:
Poul-Henning Kamp 1995-05-02 04:03:07 +00:00
parent 641a27e68b
commit 7e97484a28
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=8212
1 changed files with 137 additions and 207 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

344
sys/i386/isa/if_ze.c
View File

@ -47,7 +47,7 @@
*/
/*
* $Id: if_ze.c,v 1.12 1995/02/26 05:14:48 bde Exp $
* $Id: if_ze.c,v 1.13 1995/03/28 07:55:35 bde Exp $
*/
#include "ze.h"
@ -106,18 +106,14 @@
* ze_softc: per line info and status
*/
struct ze_softc {
caddr_t maddr;
u_long iobase, irq;
struct arpcom arpcom; /* ethernet common */
char *type_str; /* pointer to type string */
char *mau; /* type of media access unit */
#if 0
u_char vendor; /* interface vendor */
u_char type; /* interface type code */
#endif
#if 0
u_short vector; /* interrupt vector */
#endif
u_short nic_addr; /* NIC (DS8390) I/O bus address */
caddr_t smem_start; /* shared memory start address */
@ -151,6 +147,7 @@ int ze_attach(), ze_ioctl(), ze_probe();
void ze_init(), ze_start(), ze_stop(), ze_intr();
void ze_reset(), ze_watchdog(), ze_get_packet();
void ze_setup __P((struct ze_softc *sc));
static inline void ze_rint();
static inline void ze_xmit();
static inline char *ze_ring_copy();
@ -325,6 +322,7 @@ ze_find_adapter (unsigned char *scratch, int reconfig)
* on exit:
* NULL if device not found
* or # of i/o addresses used (if found)
pcic(
*/
int
ze_probe(isa_dev)
@ -372,125 +370,19 @@ ze_probe(isa_dev)
enet_addr[5] = PEEK(isa_dev->id_maddr+0xffa);
pcic_unmap_memory (slot, 0);
re_init_flag = 0;
re_init:
/*
* (2) map card configuration registers. these are offset
* in card memory space by 0x20000. normally we could get
* this offset from the card information structure, but I'm
* too lazy and am not quite sure if I understand the CIS anyway.
*
* XXX IF YOU'RE TRYING TO PORT THIS DRIVER FOR A DIFFERENT
* PCMCIA CARD, the most likely thing to change is the constant
* 0x20000 in the next statement. Oh yes, also change the
* card id string that we probe for.
*/
pcic_map_memory (slot, 0, kvtop (isa_dev->id_maddr), 0x20000, 8L,
ATTRIBUTE, 1);
POKE(isa_dev->id_maddr, 0x80); /* reset the card (how long?) */
DELAY (40000);
/*
* Set the configuration index. According to [1], the adapter won't
* respond to any i/o signals until we do this; it uses the
* Memory Only interface (whatever that is; it's not documented).
* Also turn on "level" (not pulse) interrupts.
*
* XXX probably should init the socket and copy register also,
* so that we can deal with multiple instances of the same card.
*/
POKE(isa_dev->id_maddr, 0x41);
pcic_unmap_memory (slot, 0);
/*
* (3) now map in the shared memory buffer. This has to be mapped
* as words, not bytes, and on a 16k boundary. The offset value
* was derived by installing IBM's POINTETH.SYS under DOS and
* looking at the PCIC registers; it's not documented in IBM's
* tech ref manual ([1]).
*/
pcic_map_memory (slot, 0, kvtop (isa_dev->id_maddr), 0x4000L, 0x4000L,
COMMON, 2);
/*
* (4) map i/o ports.
*
* XXX is it possible that the config file leaves this unspecified,
* in which case we have to pick one?
*
* At least one PCMCIA device driver I'v seen maps a block
* of 32 consecutive i/o ports as two windows of 16 ports each.
* Maybe some other pcic chips are restricted to 16-port windows;
* the 82365SL doesn't seem to have that problem. But since
* we have an extra window anyway...
*/
#ifdef SHARED_MEMORY
pcic_map_io (slot, 0, isa_dev->id_iobase, 32, 1);
#else
pcic_map_io (slot, 0, isa_dev->id_iobase, 16, 1);
pcic_map_io (slot, 1, isa_dev->id_iobase+16, 16, 2);
#endif /* SHARED_MEMORY */
/*
* (5) configure the card for the desired interrupt
*
* XXX is it possible that the config file leaves this unspecified?
*/
pcic_map_irq (slot, ffs (isa_dev->id_irq) - 1);
/* tell the PCIC that this is an I/O card (not memory) */
pcic_putb (slot, PCIC_INT_GEN,
pcic_getb (slot, PCIC_INT_GEN) | PCIC_CARDTYPE);
#if 0
/* tell the PCIC to use level-mode interrupts */
/* XXX this register may not be present on all controllers */
pcic_putb (slot, PCIC_GLO_CTRL,
pcic_getb (slot, PCIC_GLO_CTRL) | PCIC_LVL_MODE);
#endif
#if 0
pcic_print_regs (slot);
#endif
sc->maddr = isa_dev->id_maddr;
sc->irq = isa_dev->id_irq;
sc->iobase = isa_dev->id_iobase;
sc->slot = slot;
/*
* Setup i/o addresses
*/
sc->nic_addr = isa_dev->id_iobase;
#if 0
sc->vector = isa_dev->id_irq;
#endif
sc->smem_start = (caddr_t)isa_dev->id_maddr;
sc->nic_addr = sc->iobase;
sc->smem_start = (caddr_t)sc->maddr;
#if 0
sc->vendor = ZE_VENDOR_IBM;
sc->type = xxx;
#endif
/* reset card to force it into a known state */
tmp = inb (isa_dev->id_iobase + ZE_RESET);
DELAY(20000);
outb (isa_dev->id_iobase + ZE_RESET, tmp);
DELAY(20000);
#if 0
tmp = inb(isa_dev->id_iobase);
printf("CR = 0x%x\n", tmp);
#endif
/*
* query MAM bit in misc register for 10base2
*/
tmp = inb (isa_dev->id_iobase + ZE_MISC);
/*
* Some Intel-compatible PCICs of Cirrus Logic fails in
* initializing them. This is a quick hack to fix this
* problem.
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*/
if (!tmp && !re_init_flag) {
re_init_flag++;
goto re_init;
}
ze_setup(sc);
tmp = inb (sc->iobase + ZE_RESET);
sc->mau = tmp & 0x09 ? "10base2" : "10baseT";
/* set width/size */
@ -517,11 +409,122 @@ ze_probe(isa_dev)
/* information for reconfiguration */
sc->last_alive = 0;
sc->last_up = 0;
sc->slot = slot;
return 32;
}
void
ze_setup(struct ze_softc *sc)
{
int re_init_flag = 0,tmp,slot = sc->slot;
re_init:
/*
* (2) map card configuration registers. these are offset
* in card memory space by 0x20000. normally we could get
* this offset from the card information structure, but I'm
* too lazy and am not quite sure if I understand the CIS anyway.
*
* XXX IF YOU'RE TRYING TO PORT THIS DRIVER FOR A DIFFERENT
* PCMCIA CARD, the most likely thing to change is the constant
* 0x20000 in the next statement. Oh yes, also change the
* card id string that we probe for.
*/
pcic_map_memory (slot, 0, kvtop (sc->maddr), 0x20000, 8L,
ATTRIBUTE, 1);
POKE(sc->maddr, 0x80); /* reset the card (how long?) */
DELAY (40000);
/*
* Set the configuration index. According to [1], the adapter won't
* respond to any i/o signals until we do this; it uses the
* Memory Only interface (whatever that is; it's not documented).
* Also turn on "level" (not pulse) interrupts.
*
* XXX probably should init the socket and copy register also,
* so that we can deal with multiple instances of the same card.
*/
POKE(sc->maddr, 0x41);
pcic_unmap_memory (slot, 0);
/*
* (3) now map in the shared memory buffer. This has to be mapped
* as words, not bytes, and on a 16k boundary. The offset value
* was derived by installing IBM's POINTETH.SYS under DOS and
* looking at the PCIC registers; it's not documented in IBM's
* tech ref manual ([1]).
*/
pcic_map_memory (slot, 0, kvtop (sc->maddr), 0x4000L, 0x4000L,
COMMON, 2);
/*
* (4) map i/o ports.
*
* XXX is it possible that the config file leaves this unspecified,
* in which case we have to pick one?
*
* At least one PCMCIA device driver I'v seen maps a block
* of 32 consecutive i/o ports as two windows of 16 ports each.
* Maybe some other pcic chips are restricted to 16-port windows;
* the 82365SL doesn't seem to have that problem. But since
* we have an extra window anyway...
*/
#ifdef SHARED_MEMORY
pcic_map_io (slot, 0, sc->iobase, 32, 1);
#else
pcic_map_io (slot, 0, sc->iobase, 16, 1);
pcic_map_io (slot, 1, sc->iobase+16, 16, 2);
#endif /* SHARED_MEMORY */
/*
* (5) configure the card for the desired interrupt
*
* XXX is it possible that the config file leaves this unspecified?
*/
pcic_map_irq (slot, ffs (sc->irq) - 1);
/* tell the PCIC that this is an I/O card (not memory) */
pcic_putb (slot, PCIC_INT_GEN,
pcic_getb (slot, PCIC_INT_GEN) | PCIC_CARDTYPE);
#if 0
/* tell the PCIC to use level-mode interrupts */
/* XXX this register may not be present on all controllers */
pcic_putb (slot, PCIC_GLO_CTRL,
pcic_getb (slot, PCIC_GLO_CTRL) | PCIC_LVL_MODE);
#endif
#if 0
pcic_print_regs (slot);
#endif
/* reset card to force it into a known state */
tmp = inb (sc->iobase + ZE_RESET);
DELAY(20000);
outb (sc->iobase + ZE_RESET, tmp);
DELAY(20000);
#if 0
tmp = inb(sc->iobase);
printf("CR = 0x%x\n", tmp);
#endif
/*
* query MAM bit in misc register for 10base2
*/
tmp = inb (sc->iobase + ZE_MISC);
/*
* Some Intel-compatible PCICs of Cirrus Logic fails in
* initializing them. This is a quick hack to fix this
* problem.
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*/
if (!tmp && !re_init_flag) {
re_init_flag++;
goto re_init;
}
}
#if NAPM > 0
static int
ze_suspend(isa_dev)
@ -714,6 +717,7 @@ ze_stop(unit)
* DS8390's, but just in case it's an old one.
*/
while (((inb(sc->nic_addr + ZE_P0_ISR) & ZE_ISR_RST) == 0) && --n);
pcic_power_off(0);
}
@ -730,6 +734,8 @@ ze_watchdog(unit)
u_char isr, imr;
u_short imask;
if(!(sc->arpcom.ac_if.if_flags & IFF_UP))
return;
/* select page zero */
outb (sc->nic_addr + ZE_P0_CR,
(inb (sc->nic_addr + ZE_P0_CR) & 0x3f) | ZE_CR_PAGE_0);
@ -768,6 +774,11 @@ ze_init(unit)
u_char command;
pcic_power_on(sc->slot);
pcic_reset(sc->slot);
if(!(sc->arpcom.ac_if.if_flags & IFF_UP))
Debugger("here!!");
ze_setup(sc);
/* address not known */
if (ifp->if_addrlist == (struct ifaddr *)0) return;
@ -885,20 +896,6 @@ ze_init(unit)
*/
outb(sc->nic_addr + ZE_P0_TCR, 0);
#if 0
/*
* If this is a 3Com board, the tranceiver must be software enabled
* (there is no settable hardware default).
*/
if (sc->vendor == ZE_VENDOR_3COM) {
if (ifp->if_flags & IFF_LINK0) {
outb(sc->asic_addr + ZE_3COM_CR, 0);
} else {
outb(sc->asic_addr + ZE_3COM_CR, ZE_3COM_CR_XSEL);
}
}
#endif
/*
* Set 'running' flag, and clear output active flag.
*/
@ -1024,16 +1021,6 @@ ze_start(ifp)
/*
* Copy the mbuf chain into the transmit buffer
*/
#if 0
/*
* Enable 16bit access to shared memory on WD/SMC boards
*/
if (sc->memwidth == 16)
if (sc->vendor == ZE_VENDOR_WD_SMC) {
laar_tmp = inb(sc->asic_addr + ZE_WD_LAAR);
outb(sc->asic_addr + ZE_WD_LAAR, laar_tmp | ZE_WD_LAAR_M16EN);
}
#endif
buffer = sc->smem_start + (sc->txb_next * ZE_TXBUF_SIZE * ZE_PAGE_SIZE);
len = 0;
@ -1043,16 +1030,6 @@ ze_start(ifp)
len += m->m_len;
}
#if 0
/*
* Restore previous shared mem access type
*/
if (sc->memwidth == 16)
if (sc->vendor == ZE_VENDOR_WD_SMC) {
outb(sc->asic_addr + ZE_WD_LAAR, laar_tmp);
}
#endif
sc->txb_next_len = max(len, ETHER_MIN_LEN);
if (sc->txb_cnt > 1)
@ -1181,6 +1158,8 @@ zeintr(unit)
struct ze_softc *sc = &ze_softc[unit];
u_char isr;
if(!(sc->arpcom.ac_if.if_flags & IFF_UP))
return;
/*
* Set NIC to page 0 registers
*/
@ -1247,14 +1226,9 @@ zeintr(unit)
if (isr & ZE_ISR_RXE) {
++sc->arpcom.ac_if.if_ierrors;
#ifdef ZE_DEBUG
#if 0
printf("ze%d: receive error %x\n", unit,
inb(sc->nic_addr + ZE_P0_RSR));
#else
printf("ze%d: receive error %b\n", unit,
inb(sc->nic_addr + ZE_P0_RSR),
"\20\8DEF\7REC DISAB\6PHY/MC\5MISSED\4OVR\3ALIGN\2FCS\1RCVD");
#endif
#endif
}
@ -1269,12 +1243,6 @@ zeintr(unit)
*/
if (isr & ZE_ISR_OVW) {
++sc->arpcom.ac_if.if_ierrors;
#if 0
/* sigh. this happens too often on our net */
log(LOG_WARNING,
"ze%d: warning - receiver ring buffer overrun\n",
unit);
#endif
/*
* Stop/reset/re-init NIC
*/
@ -1318,30 +1286,7 @@ zeintr(unit)
* interface to not accept packets with errors).
*/
if (isr & (ZE_ISR_PRX|ZE_ISR_RXE)) {
#if 0
/*
* Enable access to shared memory on WD/SMC boards
*/
if (sc->memwidth == 16)
if (sc->vendor == ZE_VENDOR_WD_SMC) {
outb(sc->asic_addr + ZE_WD_LAAR,
inb(sc->asic_addr + ZE_WD_LAAR)
| ZE_WD_LAAR_M16EN);
}
#endif
ze_rint (unit);
#if 0
/*
* Disable access to shared memory
*/
if (sc->memwidth == 16)
if (sc->vendor == ZE_VENDOR_WD_SMC) {
outb(sc->asic_addr + ZE_WD_LAAR,
inb(sc->asic_addr + ZE_WD_LAAR)
& ~ZE_WD_LAAR_M16EN);
}
#endif
}
/*
@ -1485,21 +1430,6 @@ ze_ioctl(ifp, command, data)
outb(sc->nic_addr + ZE_P0_RCR, ZE_RCR_AB);
}
#endif
#if 0
/*
* An unfortunate hack to provide the (required) software control
* of the tranceiver for 3Com boards. The LLC0 flag disables
* the tranceiver if set.
*/
if (sc->vendor == ZE_VENDOR_3COM) {
if (ifp->if_flags & IFF_LINK0) {
outb(sc->asic_addr + ZE_3COM_CR, 0);
} else {
outb(sc->asic_addr + ZE_3COM_CR, ZE_3COM_CR_XSEL);
}
}
#endif
break;
default: