Add 8devices CARAMBOLA2 support.
This is based on the AR933x (Hornet) SoC from Qualcomm Atheros. It's a much nicer board to do development on - 64MB RAM, 16MB flash. The development board breaks out the GPIO pins, ethernet, serial (via a USB<->RS232 chip), USB host and of course a small wifi antenna. Everything but the wifi works thus far.
This commit is contained in:
parent
70234acbb1
commit
82aa6e614b
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=251551
53
sys/mips/conf/CARAMBOLA2
Normal file
53
sys/mips/conf/CARAMBOLA2
Normal file
@ -0,0 +1,53 @@
|
|||||||
|
#
|
||||||
|
# Carambola 2 - an AR933x based SoC wifi device.
|
||||||
|
#
|
||||||
|
# http://shop.8devices.com/wifi4things/carambola2
|
||||||
|
#
|
||||||
|
# * AR9330 SoC
|
||||||
|
# * 64MB RAM
|
||||||
|
# * 16MB flash
|
||||||
|
# * Integrated 1x1 2GHz wifi and 10/100 bridge
|
||||||
|
#
|
||||||
|
# $FreeBSD$
|
||||||
|
#
|
||||||
|
|
||||||
|
# Include the default AR933x parameters
|
||||||
|
include "AR933X_BASE"
|
||||||
|
|
||||||
|
ident CARAMBOLA2
|
||||||
|
|
||||||
|
# Override hints with board values
|
||||||
|
hints "CARAMBOLA2.hints"
|
||||||
|
|
||||||
|
# Board memory - 64MB
|
||||||
|
options AR71XX_REALMEM=(64*1024*1024)
|
||||||
|
|
||||||
|
# i2c GPIO bus
|
||||||
|
#device gpioiic
|
||||||
|
#device iicbb
|
||||||
|
#device iicbus
|
||||||
|
#device iic
|
||||||
|
|
||||||
|
# Options required for miiproxy and mdiobus
|
||||||
|
options ARGE_MDIO # Export an MDIO bus separate from arge
|
||||||
|
device miiproxy # MDIO bus <-> MII PHY rendezvous
|
||||||
|
|
||||||
|
device etherswitch
|
||||||
|
device arswitch
|
||||||
|
|
||||||
|
# read MSDOS formatted disks - USB
|
||||||
|
#options MSDOSFS
|
||||||
|
|
||||||
|
# Enable the uboot environment stuff rather then the
|
||||||
|
# redboot stuff.
|
||||||
|
options AR71XX_ENV_UBOOT
|
||||||
|
|
||||||
|
# uzip - to boot natively from flash
|
||||||
|
device geom_uncompress
|
||||||
|
options GEOM_UNCOMPRESS
|
||||||
|
|
||||||
|
# Used for the static uboot partition map
|
||||||
|
device geom_map
|
||||||
|
|
||||||
|
# Boot off of the rootfs, as defined in the geom_map setup.
|
||||||
|
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
|
109
sys/mips/conf/CARAMBOLA2.hints
Normal file
109
sys/mips/conf/CARAMBOLA2.hints
Normal file
@ -0,0 +1,109 @@
|
|||||||
|
#
|
||||||
|
# This file adds to the values in AR91XX_BASE.hints.
|
||||||
|
#
|
||||||
|
# $FreeBSD$
|
||||||
|
|
||||||
|
# mdiobus on arge1
|
||||||
|
hint.argemdio.0.at="nexus0"
|
||||||
|
hint.argemdio.0.maddr=0x1a000000
|
||||||
|
hint.argemdio.0.msize=0x1000
|
||||||
|
hint.argemdio.0.order=0
|
||||||
|
|
||||||
|
# Embedded Atheros Switch
|
||||||
|
hint.arswitch.0.at="mdio0"
|
||||||
|
|
||||||
|
# XXX this should really say it's an AR933x switch, as there
|
||||||
|
# are some vlan specific differences here!
|
||||||
|
hint.arswitch.0.is_7240=1
|
||||||
|
hint.arswitch.0.numphys=4
|
||||||
|
hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY
|
||||||
|
hint.arswitch.0.is_rgmii=0
|
||||||
|
hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII
|
||||||
|
|
||||||
|
# arge0 - MII, autoneg, phy(4)
|
||||||
|
hint.arge.0.phymask=0x10 # PHY4
|
||||||
|
hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
|
||||||
|
|
||||||
|
# arge1 - GMII, 1000/full
|
||||||
|
hint.arge.1.phymask=0x0 # No directly mapped PHYs
|
||||||
|
hint.arge.1.media=1000
|
||||||
|
hint.arge.1.fduplex=1
|
||||||
|
|
||||||
|
# The AP121 16MB flash layout:
|
||||||
|
#
|
||||||
|
# [ 0.700000] 0x000000000000-0x000000040000 : "u-boot"
|
||||||
|
# [ 0.710000] 0x000000040000-0x000000050000 : "u-boot-env"
|
||||||
|
# [ 0.710000] 0x000000050000-0x000000250000 : "kernel"
|
||||||
|
# [ 0.720000] 0x000000250000-0x000000fe0000 : "rootfs"
|
||||||
|
# [ 0.720000] mtd: partition "rootfs" set to be root filesystem
|
||||||
|
# [ 0.730000] mtd: partition "rootfs_data" created automatically, ofs=480000, len=B60000
|
||||||
|
# [ 0.740000] 0x000000480000-0x000000fe0000 : "rootfs_data"
|
||||||
|
# [ 0.740000] 0x000000fe0000-0x000000ff0000 : "nvram"
|
||||||
|
# [ 0.750000] 0x000000ff0000-0x000001000000 : "art"
|
||||||
|
# [ 0.750000] 0x000000050000-0x000000fe0000 : "firmware"
|
||||||
|
|
||||||
|
hint.map.0.at="flash/spi0"
|
||||||
|
hint.map.0.start=0x00000000
|
||||||
|
hint.map.0.end=0x000040000
|
||||||
|
hint.map.0.name="uboot"
|
||||||
|
hint.map.0.readonly=1
|
||||||
|
|
||||||
|
hint.map.1.at="flash/spi0"
|
||||||
|
hint.map.1.start=0x00040000
|
||||||
|
hint.map.1.end=0x00050000
|
||||||
|
hint.map.1.name="uboot-env"
|
||||||
|
hint.map.1.readonly=0
|
||||||
|
|
||||||
|
hint.map.2.at="flash/spi0"
|
||||||
|
hint.map.2.start=0x00050000
|
||||||
|
hint.map.2.end=0x00250000
|
||||||
|
hint.map.2.name="kernel"
|
||||||
|
hint.map.2.readonly=0
|
||||||
|
|
||||||
|
hint.map.3.at="flash/spi0"
|
||||||
|
hint.map.3.start=0x00250000
|
||||||
|
hint.map.3.end=0x00fe0000
|
||||||
|
hint.map.3.name="rootfs"
|
||||||
|
hint.map.3.readonly=0
|
||||||
|
|
||||||
|
hint.map.4.at="flash/spi0"
|
||||||
|
hint.map.4.start=0x00fe0000
|
||||||
|
hint.map.4.end=0x00ff0000
|
||||||
|
hint.map.4.name="cfg"
|
||||||
|
hint.map.4.readonly=0
|
||||||
|
|
||||||
|
# This is radio calibration section. It is (or should be!) unique
|
||||||
|
# for each board, to take into account thermal and electrical differences
|
||||||
|
# as well as the regulatory compliance data.
|
||||||
|
#
|
||||||
|
hint.map.5.at="flash/spi0"
|
||||||
|
hint.map.5.start=0x00ff0000
|
||||||
|
hint.map.5.end=0x01000000
|
||||||
|
hint.map.5.name="art"
|
||||||
|
hint.map.5.readonly=1
|
||||||
|
|
||||||
|
# GPIO specific configuration block
|
||||||
|
|
||||||
|
# Don't flip on anything that isn't already enabled.
|
||||||
|
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
|
||||||
|
# not used here.
|
||||||
|
hint.gpio.0.function_set=0x00000000
|
||||||
|
hint.gpio.0.function_clear=0x00000000
|
||||||
|
|
||||||
|
# These are the GPIO LEDs and buttons which can be software controlled.
|
||||||
|
#hint.gpio.0.pinmask=0x001c02ae
|
||||||
|
hint.gpio.0.pinmask=0x00001803
|
||||||
|
|
||||||
|
# gpio0 - WLAN LED
|
||||||
|
# gpio1 - USB LED
|
||||||
|
# gpio11 - Jumpstart button
|
||||||
|
# gpio12 - Reset button
|
||||||
|
|
||||||
|
# LEDs are configured separately and driven by the LED device
|
||||||
|
hint.gpioled.0.at="gpiobus0"
|
||||||
|
hint.gpioled.0.name="wlan"
|
||||||
|
hint.gpioled.0.pins=0x0001
|
||||||
|
|
||||||
|
hint.gpioled.1.at="gpiobus0"
|
||||||
|
hint.gpioled.1.name="usb"
|
||||||
|
hint.gpioled.1.pins=0x0002
|
Loading…
Reference in New Issue
Block a user