d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Try to support the Cirrus Logic PD6833 better in pci mode. This is

Browse Source 
done from the datasheets since I'm ahving problems with my laptop that
has the 6833 in it...

Minor rework of TI code.  Should be the same as before.
This commit is contained in:
Warner Losh 2001-08-14 05:31:56 +00:00
parent f72a2ca28c
commit 82c38f3a43
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=81617
2 changed files with 42 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
sys/pccard/pcic_pci.c
View File

@ -219,24 +219,44 @@ pcic_pci_lookup(u_int32_t devid, struct pcic_pci_table *tbl)
* Set up the CL-PD6832
*/
static void
pcic_pci_pd6832_init(device_t dev)
pcic_pci_pd683x_init(device_t dev)
{
struct pcic_softc *sc = device_get_softc(dev);
u_long bcr; /* to set interrupts */
u_int32_t device_id = pci_get_devid(dev);
u_long bcr;
u_long cm1;
/*
* CLPD683X management interrupt enable bit is bit 11 in bridge
* control register(offset 0x3d).
* CLPD6832 management interrupt enable bit is bit 11 (MGMT_IRQ_ENA)
* in bridge control register(offset 0x3d).
* When this bit is turned on, card status change interrupt sets
* on ISA IRQ interrupt.
* Bit 7 controls the function interrupts and appears to be stanard.
*
* The CLPD6833 does things differently. It has bit 7, but not bit
* 11. Bit 11's functionality appears to be in the "Configuration
* Miscellaneous 1" register bit 1.
*/
bcr = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
bcr |= CLPD6832_BCR_MGMT_IRQ_ENA;
if (sc->csc_route == pci_parallel)
bcr &= ~CLPD6832_BCR_ISA_IRQ;
if (device_id == PCI_DEVICE_ID_PCIC_CLPD6832) {
if (sc->csc_route >= pci_parallel)
bcr &= ~CLPD6832_BCR_MGMT_IRQ_ENA;
else
bcr |= CLPD6832_BCR_MGMT_IRQ_ENA;
}
if (sc->func_route >= pci_parallel)
bcr &= ~CB_BCR_INT_EXCA;
else
bcr |= CLPD6832_BCR_ISA_IRQ;
bcr |= CB_BCR_INT_EXCA;
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, bcr, 2);
if (device_id == PCI_DEVICE_ID_PCIC_CLPD6833) {
cm1 = pci_read_config(dev, CLPD6833_CFG_MISC_1, 4);
if (sc->csc_route >= pci_parallel)
cm1 &= ~CLPD6833_CM1_MGMT_EXCA_ENA;
else
cm1 |= CLPD6833_CM1_MGMT_EXCA_ENA;
pci_write_config(dev, CLPD6833_CFG_MISC_1, cm1, 4);
}
}
/*
@ -274,13 +294,13 @@ pcic_pci_ti_init(device_t dev)
* Bridge Control Register(Offset:0x3e,0x13e).
* Takeshi Shibagaki(shiba@jp.freebsd.org)
*/
if (sc->func_route == pci_parallel) {
if (sc->func_route >= pci_parallel) {
cardcntl |= TI113X_CARDCNTL_PCI_IRQ_ENA;
cardcntl &= ~TI113X_CARDCNTL_PCI_IREQ;
} else {
cardcntl |= TI113X_CARDCNTL_PCI_IREQ;
}
if (sc->csc_route == pci_parallel)
if (sc->csc_route >= pci_parallel)
cardcntl |= TI113X_CARDCNTL_PCI_CSC;
else
cardcntl &= ~TI113X_CARDCNTL_PCI_CSC;
@ -294,7 +314,7 @@ pcic_pci_ti_init(device_t dev)
}
break;
}
if (sc->func_route == pci_parallel) {
if (sc->func_route >= pci_parallel) {
devcntl &= ~TI113X_DEVCNTL_INTR_MASK;
pci_write_config(dev, TI113X_PCI_DEVICE_CONTROL, devcntl, 1);
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
@ -334,7 +354,7 @@ pcic_pci_cardbus_init(device_t dev)
unit = device_get_unit(dev);
if (sc->func_route == pci_parallel) {
if (sc->func_route >= pci_parallel) {
/* Use INTA for routing interrupts via pci bus */
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
brgcntl &= ~CB_BCR_INT_EXCA;
@ -512,7 +532,7 @@ pcic_pci_probe(device_t dev)
* We only need to route interrupts when we're doing pci
* parallel interrupt routing.
*/
if (pcic_interrupt_route == pci_parallel) {
if (pcic_interrupt_route >= pci_parallel) {
rid = 0;
res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_ACTIVE);
@ -631,14 +651,18 @@ pcic_pci_attach(device_t dev)
pcic_pci_cardbus_init(dev);
break;
case PCI_DEVICE_ID_PCIC_CLPD6832:
pcic_pci_pd6832_init(dev);
case PCI_DEVICE_ID_PCIC_CLPD6833:
pcic_pci_pd683x_init(dev);
pcic_pci_cardbus_init(dev);
break;
case PCI_DEVICE_ID_PCIC_CLPD6729:
pcic_pci_pd6729_init(dev);
default:
pcic_pci_cardbus_init(dev);
break;
}
if (sc->csc_route == pci_parallel) {
if (sc->csc_route >= pci_parallel) {
start = 0;
end = ~0;
} else {

6
sys/pccard/pcic_pci.h
View File

@ -32,12 +32,12 @@
/* Share the devid database with NEWCARD */
#include <dev/pccbb/pccbbdevid.h>
/* CL-PD6832 CardBus defines */
#define CLPD6832_SOCKET 0x004c
/* CL-PD683x CardBus defines */
#define CLPD6833_CFG_MISC_1 0x98
/* Configuration constants */
#define CLPD6832_BCR_MGMT_IRQ_ENA 0x0800
#define CLPD6832_BCR_ISA_IRQ 0x0080
#define CLPD6833_CM1_MGMT_EXCA_ENA 0x0001 /* Set ExCA, Clr PCI */
/* End of CL-PD6832 defines */
/* Texas Instruments PCI-1130/1131 CardBus Controller */