Prepare for mdoc(7)NG.

This commit is contained in:
Ruslan Ermilov 2000-12-27 15:30:30 +00:00
parent d90d7015f9
commit 8b5c4af3ff
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=70403
73 changed files with 294 additions and 423 deletions

View File

@ -83,7 +83,7 @@ you can define an alias in
.It Sy fullname
Firstname and surname.
The
.Ql Pa \:
.Ql Pa \&:
character is not allowed.
.It Sy shell
Only valid shells from the shell database or sliplogin and pppd
@ -183,6 +183,7 @@ on up.
.It Sy -verbose,-v
Many warnings, questions.
Recommended for novice users.
.El
.Sh FORMATS
.Bl -tag -width Ds -compact
.Ql Pa #

View File

@ -116,6 +116,7 @@ command line if this option is used.
Identifies the user to be removed; if not present,
.Nm
interactively asks for the user to be removed.
.El
.Sh FILES
.Bl -tag -width /etc/master.passwd -compact
.It Pa /etc/master.passwd

View File

@ -165,7 +165,7 @@ valid event names:
.Nm
is running:
.Pp
.Bl -tag -hang -width USERSUSPENDREQ -compact -offset indent
.Bl -tag -width USERSUSPENDREQ -compact -offset indent
.It STANDBYREQ
.It USERSTANDBYREQ
.It SUSPENDREQ
@ -180,7 +180,7 @@ only zzz should be specified in the command list.
.Nm
after kernel handling:
.Pp
.Bl -tag -hang -width USERSUSPENDREQ -compact -offset indent
.Bl -tag -width USERSUSPENDREQ -compact -offset indent
.It NORMRESUME
.It CRITRESUME
.It STANDBYRESUME

View File

@ -53,16 +53,16 @@ and
.Sq HDD boot menu.
The IPL occupies sector 0 of a disk and is followed by the partition
table. The IPL loads the HDD boot menu that starts from 0x400.
.Pp
The
.Nm
installs and makes backup copy of the IPL and the HDD boot menu; and
allows changing the version number field in the sector 0.
.Pp
Note that the format command in NEC's OSs replaces the HDD boot menu
with its own HDD boot menu when the version number field is smaller
than that in the format command.
.Pp
The options are:
.Bl -tag -width indent
.It Fl B

View File

@ -56,7 +56,6 @@ Word
.Em play
can be omitted.
.Bl -tag -width Cm
.It Cm play Ar first_track Op Ar last_track
Play from track
.Ar first_track
@ -64,7 +63,6 @@ to track
.Ar last_track .
The first track has number 1.
Can be omitted in all cases.
.It Cm play Ar start_m:start_s.start_f Op Ar end_m:end_s.end_f
Play from the absolute address
(MSF) defined by
@ -82,97 +80,75 @@ in seconds and
(frame number). Minutes are in the range 0-99.
Seconds are in the range 0-59.
Frame numbers are in the range 0-74.
.It Cm play Op Ar #start_block Op length
Play starting from the logical block
.Ar start_block
using
.Ar length
logical blocks.
.It Cm pause
Stop playing.
Do not stop the disc.
.It Cm resume
Resume playing.
Used after the
.Em pause
command.
.It Cm stop
Stop the disc.
.It Cm eject
Eject the disc.
.It Cm close
Inject the disc.
.It Cm volume Ar left_channel Ar right_channel
Set the volume of left channel to
.Ar left_channel
and the volume of right channel to
.Ar right_channel .
Allowed values are in the range 0-255.
.It Cm volume Ar mute
Turn the sound off.
.It Cm volume Ar mono
Set the mono mode.
.It Cm volume Ar stereo
Set the stereo mode.
.It Cm volume Ar left
Play the left subtrack on both left and right channels.
.It Cm volume Ar right
Play the right subtrack on both left and right channels.
.It Cm info
Print the table of contents.
.It Cm status
.It Cm status Xo
.Op Ar audio | media | volume
.Xc
Print the information about the disc:
.Nm audio
the current playing status and position,
.Nm media
the current media catalog status,
.Nm volume
.Pp
.Bl -tag -width "volume" -compact
.It Ar audio
the current playing status and position
.It Ar media
the current media catalog status
.It Ar volume
the current values of the volume for left and right channels.
.El
.It Cm cdid
Display the serial number of the cd using the method used by the
cddb (http://www.cddb.org/) project.
.It Cm help
Print the list of available commands.
.It Cm debug Ar on
Enable the debugging mode of the CD device driver.
.It Cm debug Ar off
Disable the driver debugging mode.
.It Cm reset
Perform the hardware reset of the device.
.It Cm set Ar msf
Set minute-second-frame ioctl mode (default).
.It Cm set Ar lba
Set LBA ioctl mode.
.It Cm quit
Quit the program.
.El
.Sh FILES
.Bl -tag -width /dev/mcd0c -compact
.It Pa /dev/cd0c

View File

@ -35,16 +35,14 @@ was originally
.Dq Cvs Through eMail ,
but now instead it seems more fitting to call it
.Dq Current Through eMail .
.Pp
.Nm Ctm
is now meant to be the definitive way to make and apply a delta between
two versions of a directory tree.
.Pp
There are two parts to this, making the delta and applying it. These are two
entirely different things.
.Ss Usage
To apply a CTM delta, you pass it to the
.Nm
command. You can pass a CTM delta on stdin, or you can give the
@ -53,12 +51,12 @@ easier for your self, since the program can accept gzip'ed files and
since it will not have to make a temporary copy of your file. You can
specify multiple deltas at one time, they will be processed one at a
time. Deltas that are already applied will be ignored.
.Pp
The
.Nm
command runs in a number of passes. It will process the entire
input file in each pass, before commencing with the next pass.
.Pp
Before working on a file
.Ar name
.Nm
@ -67,16 +65,16 @@ first checks for the existence of the file
If this file exists,
.Nm
works on it instead.
.Pp
Pass 1 will verify that the input file is OK. The syntax, the data
and the global MD5 checksum will be checked. If any of these fail,
.Nm
will simply reject the input file.
.Pp
Pass 2 will validate that the directory tree is in the state expected by
the CTM delta. This is done by looking for files and directories which
should/should not exist and by checking the MD5 checksums of files.
.Pp
If a
.Ar backup-file
had been specified using the
@ -88,9 +86,9 @@ to this file using the archiver command specified by the
.Fl t
option. The default archiver command is
.Nm "tar -rf %s -T -" .
.Pp
Pass 3 will actually apply the delta.
.Pp
The list of files that would be modified by
.Nm
is subject to filtering regular expressions specified
@ -107,24 +105,20 @@ options are applied in order of appearance on the command line. The last
filter that matched a given file name determines whether the file would be
operated on or left alone by
.Nm .
.Pp
.Nm Ctm
will extract the file hierarchy below its working directory. Absolute
filenames or filenames containing references through
.Sq \&.
.Sq Pa .\&
and
.Sq \&.\&.
.Sq Pa ..\&
are explicitly prohibited as a security measure.
.Ss Options
.Bl -tag -width indent -compact
.Bl -tag -width indent
.It Fl b Ar basedir
Prepend the path
.Ar basedir
to every filename.
.It Fl B Ar backup-file
Backup all files that would be modified by this CTM run to
.Ar backup-file .
@ -134,10 +128,8 @@ and
.Fl x
options, then the final set of files backed up are those that would be
modified by CTM after the filters are applied.
.It Fl c
Check it out, don't do anything.
.It Fl e Ar regular_expression
Match each name in the CTM file against
.Ar regular_expression ,
@ -149,20 +141,17 @@ sequence number checks. For example, the expression
for example, will select the
.Nm usr.sbin/ctm
source directory and all pathnames under it.
.Pp
Pathnames can be disabled from being considered by CTM using the
.Fl x
option.
.It Fl F
Force.
.It Fl k
Keep files and directories and don't remove them even if the CTM file
specifies they are to be removed. If the
.Fl B
option is specified, these files and directories will not be backed up.
.It Fl l
List files that would be modified by this invocation of CTM and the
actions that would be performed on them. Use of the
@ -177,11 +166,8 @@ and
.Fl x
options to determine which files would be modified by the given set of
command line options.
.It Fl q
Tell us less.
.It Fl t Ar tar-command
Use
.Ar tar-command
@ -191,24 +177,18 @@ This option takes effect only if a backup file had been specified using the
.Fl B
option. A %s in the tar command will be replaced by the name of the backup
file.
.It Fl T Ar tmpdir
Put temporary files under
.Ar tmpdir .
.It Fl u
Set modification time of created and modified files to the CTM delta
creation time.
.It Fl v
Tell us more.
.It Fl V Ar level
Tell us more.
.Ar Level
is the level of verbosity.
.It Fl x Ar regular_expression
Match each name in the CTM file against
.Ar regular_expression
@ -216,11 +196,10 @@ and if it matches, leave the file alone. There may be any number of these
options. Use of this option disables the
.Pa .ctm_status
sequence number checks.
.Pp
Pathnames can be selected for CTM's consideration using the
.Fl e
option.
.El
.Pp
.Sh SECURITY
@ -264,14 +243,12 @@ for more details on this.
The same effect may be achieved with the
.Fl T
flag.
.Sh FILES
.Pa .ctm_status
contains the sequence number of the last CTM delta applied. Changing
or removing this file will greatly confuse
.Nm .
.Pp
Using the
.Fl e
and
@ -279,23 +256,18 @@ and
options can update a partial subset of the source tree and causes sources
to be in an inconsistent state. It is assumed that you know what you are
doing when you use these options.
.Sh EXAMPLES
.Bd -literal
cd ~cvs
/usr/sbin/ctm ~ctm/cvs-*
.Ed
.Pp
To extract and patch all sources under `lib'
.Bd -literal
cd ~/lib-srcs
/usr/sbin/ctm -e '^lib' ~ctm/src-cur*
.Ed
.Sh DIAGNOSTICS
Numerous messages, hopefully self-explanatory. The
.Dq noise level
can be adjusted with the
@ -304,29 +276,24 @@ can be adjusted with the
and
.Fl V
options.
.Sh SEE ALSO
.Xr ctm_rmail 1 ,
.Xr ctm 5
.Sh HISTORY
Initial trials were run during the work on
.Fx 1.1.5 ,
and many bugs and
methods were hashed out.
.Pp
The
.Nm
command appeared in
.Fx 2.1 .
.Sh AUTHORS
The CTM system has been designed and implemented by
.An Poul-Henning Kamp
.Aq phk@FreeBSD.org .
.Pp
.An Joerg Wunsch
.Aq joerg@FreeBSD.org
wrote this man-page.

View File

@ -18,29 +18,26 @@
.Sh NAME
.Nm ctm
.Nd source code mirror system
.Sh DESCRIPTION
The
.Nm
transfers data in a specific file format, called a CTM delta.
.Pp
CTM deltas consist of control lines and data chunks. Each control
line starts with the letters
.Dq CTM ,
followed by a CTM statement and control data, and ends with a '\en'
character.
.Pp
Data chunks always belong to the preceding control line, and the
last field on that control line is the number of bytes in the data
chunk.
A trailing newline '\en' character follows each data chunk, this
newline is not part of the chunk and isn't included in the count.
.Pp
The CTM statements are as follows.
.Bl -tag -width indent
.It _BEGIN Ar version name number timestamp prefix
This is the overall begin of a CTM delta file. The
.Ar version
field must match the program version
@ -62,16 +59,12 @@ meaning this is a UTC timestamp
The
.Ar prefix
field is currently not implemented.
.It _END Ar md5
This statement ends the CTM delta, the global
.Ar md5
checksum is matched against the MD5 checksum of the entire delta, up to
and including the space (0x20) character following ``_END''.
.It \&FM Ar name uid gid mode md5 count
Make the file
.Ar name ,
the original file had the uid
@ -85,13 +78,11 @@ mode
.Pq numerical, octal ,
and the MD5 checksum
.Ar md5 .
.Pp
The following
.Ar count
bytes data are the contents of the new file.
.It \&FS Ar name uid gid mode md5before md5after count
Substitute the contents of file
.Ar name ,
the original file had the new uid
@ -107,31 +98,25 @@ the old MD5 checksum
.Ar md5before ,
and the new MD5 checksum
.Ar md5after .
.Pp
The following
.Ar count
bytes data are the contents of the new file.
.Pp
File substitution is used if the commands to edit a file would exceed
the total file length, so substituting it is more efficient.
.It \&FN Ar name uid gid mode md5before md5after count
Edit the file
.Ar name .
The arguments are as above, but the data sections contains an
.Xr diff 1
-n script which should be applied to the file in question.
.It \&FR Ar name md5
Remove the file
.Ar name ,
which must match the MD5 checksum
.Ar md5 .
.It \&AS Ar name uid gid mode
The original file
.Ar name
changed its owner to
@ -140,9 +125,7 @@ its group to
.Ar gid ,
and/or its mode to
.Ar mode .
.It \&DM Ar name uid gid mode
The directory
.Ar name
is to be created, it had originally the owner
@ -151,23 +134,16 @@ group
.Ar gid ,
and mode
.Ar mode .
.It \&DR Ar name
The directory
.Ar name
is to be removed.
.El
.Sh EXAMPLES
In the following example, long lines have been folded to make them
printable
.Pq marked by backslashes .
.Bd -literal
CTM_BEGIN 2.0 cvs-cur 485 19950324214652Z .
CTMFR src/sys/gnu/i386/isa/scd.c,v 5225f13aa3c7e458f9dd0d4bb637b18d
CTMFR src/sys/gnu/i386/isa/scdreg.h,v e5af42b8a06f2c8030b93a7d71afb223
@ -185,30 +161,23 @@ ache 95/03/24 09:59:50
Log:
[...]
CTM_END 74ddd298d76215ae45a077a4b6a74e9c
.Ed
.Sh SEE ALSO
.Xr ctm 1 ,
.Xr ctm_rmail 1 ,
.Xr ed 1
.Sh HISTORY
Initial trials ran during the
.Fx 1.1.5 ,
and many bugs and
methods were hashed out.
The CTM system has been made publicly available in
.Fx 2.1 .
.Sh AUTHORS
The CTM system has been designed and implemented by
.An Poul-Henning Kamp
.Aq phk@FreeBSD.org .
.Pp
.An Joerg Wunsch
.Aq joerg@FreeBSD.org
wrote this man-page.

View File

@ -417,8 +417,7 @@ Completed deltas.
.It Pa BASEDIR/.ctm_status
File containing the name and number of the next delta to be applied to this
source tree.
.\" This next request is for sections 1, 6, 7 & 8 only
.\" (command return values (to shell) and fprintf/stderr type diagnostics)
.El
.Sh DIAGNOSTICS
.Nm ctm_smail ,
.Nm ctm_dequeue

View File

@ -35,7 +35,7 @@ The command prints a list of sections found in the ELF executable and the
section sizes and offsets of the output file for diagnostic purposes.
.Pp
Given an object file
.B src.o
.Pa src.o
the following two commands will create a binary for ARCS:
.Dl ld \-o a.out \-M \-N \-Ttext 0x80900000 src.o\c
.Dl elf2exe a.out a.exe\c

View File

@ -122,6 +122,7 @@ on the file system identified by
The file system must have attributes started on it, and the attribute
most have been enabled using
.Cm enable .
.El
.Sh EXAMPLES
.Pp
.Dl extattrctl start /

View File

@ -107,7 +107,7 @@ Fill byte.
Number of steps per track.
An alternate method to specify the geometry data to write to the floppy disk.
.El
.Pp
If the
.Fl q
flag has not been specified, the user is asked for a confirmation

View File

@ -62,13 +62,11 @@ Print the resulting conversion tables (as C-source) to stdout instead of
doing the actual conversion.
.El
.Pp
.Sh STANDARDS
A-Law and u-Law conversions are specified in ITU Recommendation G.711.
.Pp
The reference implementation done by Sun Microsystems, Inc. is available
from http://www.itu.int/itudoc/itu-t/rec/g/g700-799/refimpl.txt
.Sh EXAMPLES
The command:
.Bd -literal -offset indent
@ -85,7 +83,6 @@ cat max_headroom.ul | g711conv -u -R > /dev/i4btel0
converts the u-law coded voice of Max Headroom to A-law, reverses the
bits of the result and moves that to an active isdn4bsd telephone connection.
.Pp
.Sh AUTHORS
The
.Nm
@ -93,4 +90,3 @@ utility and this manpage were written by
.An Hellmuth Michaelis Aq hm@kts.org
based on the G.711 conversion reference code written by Sun Microsystems,
Inc. and code contributed to isdn4bsd by Stefan Bethke.

View File

@ -330,23 +330,20 @@ by the kernel sending the
.Em I4B_DISCONNECT_IND
message and the CDID corresponding to the call is no longer valid.
.Pp
.Sh SIGNALS
Sending a HUP signal to
.Nm
causes all open connections to be terminated and the configuration file is
reread.
In case aliasfile handling was enabled, the aliasfile is also
reread.
.Pp
Sending a USR1 signal to
.Nm
causes the accounting file and the logfile (if logging to a file is used
instead of logging via the
.Xr syslog 3
facility) to be closed and reopened to make logfile rotation possible.
.Sh ENVIRONMENT
The following environment variables affect the execution of
.Nm :
@ -357,39 +354,29 @@ See
.Xr environ 7
for more information.
.El
.Sh FILES
.Bl -tag -width /etc/isdn/isdnd.rates -compact
.Bl -tag -width /etc/isdn/isdnd.rates
.It Pa /dev/i4b
The device-file used to communicate with the kernel ISDN driver subsystem.
.It Pa /var/log/messages
A record of the actions in case of syslogd logging support.
.It Pa /var/log/isdnd.acct
The default accounting information filename (if accounting is configured).
.It Pa /var/log/isdnd.log
The default logging filename (if logging to a file is configured).
.It Pa /var/run/isdnd.pid
The process id of the isdn daemon (also known as "lockfile" to isdnd, preventing multiple invocations of it).
.It Pa /usr/local/lib/isdn
.It Pa /etc/isdn
The directory where isdnd expects some supplementary data files and programs
for telephone answering support.
.It Pa /etc/isdn/isdnd.rc
The default runtime configuration file.
.It Pa /etc/isdn/isdnd.rates
The default unit charging rates specification file.
.It Pa /etc/isdn/isdntel.alias
The default table (if aliasing is enabled) to convert phone number to caller's name.
.El
.Sh EXAMPLES
For a first try, the following command should be used to start
.Nm
@ -413,11 +400,8 @@ will start
with reasonable debugging messages enabled, full-screen mode of operation,
full-screen display redirected to /dev/ttyv03 and using a termcap entry
for vt100 on this display.
.Sh DIAGNOSTICS
Exit status is 0 on success, 1 on error.
.Pp
.Sh SEE ALSO
.Xr syslogd 8 ,
.Xr isdntrace 8 ,
@ -427,10 +411,8 @@ Exit status is 0 on success, 1 on error.
.Xr i4bisppp 4 ,
.Xr i4bipr 4
.Xr i4bing 4
.Sh BUGS
Still one or more left.
.Sh AUTHORS
The
.Nm

View File

@ -86,7 +86,6 @@ is the number of seconds the connection lasted.
and
.Em OUTBYTES
is the (optional) number of bytes that were transferred.
.Sh FILES
.Bl -tag -width /var/log/isdnd.acct -compact
.It Pa /var/log/isdnd.acct
@ -94,19 +93,15 @@ The default accounting information file for the
.Nm isdnd
ISDN daemon.
.El
.Sh EXAMPLES
This is a typical accounting line:
.Pp
.Dl 12.06.97 10:41:37 - 12.06.97 10:45:18 GROGGY 2 (65) (4711/1147)
.Sh SEE ALSO
.Xr isdnd 8 ,
.Xr isdnd.rc 5
.Sh AUTHORS
The
.Xr isdnd 8
daemon and this manual page were written by
.An Hellmuth Michaelis Aq hm@kts.org .

View File

@ -180,7 +180,7 @@ The
.Em monitor
specification may either be:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar the name of a local (UNIX-domain) socket
this MUST start with a "/", example: /var/run/isdn-monitor
.It Ar a dotted-quad host specification
@ -198,7 +198,7 @@ This keyword specifies the access rights for a previously used
keyword.
The supported access rights are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar fullcmd
.It Ar restrictedcmd
.It Ar channelstate
@ -288,7 +288,7 @@ controller is connected to.
The following parameters are currently
supported:
.Pp
.Bl -tag -width calledback -compact -offset
.Bl -tag -width calledback -compact
.It Ar dss1
The DSS1 or so-called "Euro-ISDN" D-channel protocol according to
ITU Recommendations Q.921 and Q.931.
@ -328,7 +328,7 @@ The B channel layer 1 protocol used for this connection.
The keyword is mandatory.
The currently configurable values are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar hdlc
HDLC framing.
.It Ar raw
@ -402,7 +402,7 @@ Used to specify what to do when an incoming connection request is received.
The keyword is mandatory.
The currently supported parameters are:
.Pp
.Bl -tag -width calledback -compact -offset
.Bl -tag -width calledback -compact
.It Ar accept
Accept an incoming call.
.It Ar reject
@ -419,7 +419,7 @@ This keyword is used to configure what type of dialout mode is used.
The keyword is mandatory.
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar normal
Normal behavior, call the remote site which is supposed to accept the call.
.It Ar calledback
@ -446,7 +446,7 @@ The keyword is optional, the default is
.Pp
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar inout
Normal behavior, connection establishment is possible from remote and local.
.It Ar in
@ -487,7 +487,7 @@ The algorithm used to determine when to hang up an outgoing call when the
line becomes idle.
The current algorithms are:
.Pp
.Bl -tag -width calledback -compact -offset
.Bl -tag -width calledback -compact
.It Ar fix-unit-size
idle algorithm which assumes fixed sized changing units during the whole call.
.It Ar var-unit-size
@ -607,7 +607,7 @@ The local site expects the authentity of the remote site to be proved by
the specified method.
The supported methods are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar none
Do not require the other side to authenticate.
Typical uses are dial-out to an ISP
@ -655,7 +655,7 @@ PPP interface.
The authentication method required by the remote site.
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar none
The remote site does not expect or support authentication.
.It Ar chap
@ -703,7 +703,7 @@ is used to specify the dialout behavior in case more than one outgoing
number is specified.
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar first
For every new (non-retry) call setup, start with the first number.
.It Ar last
@ -748,7 +748,7 @@ This keyword is used to specify from which source
takes the unitlength for short-hold mode.
The currently configurable values are:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar none
Then unitlength is not specified anywhere.
.It Ar cmdl
@ -773,7 +773,7 @@ data to the user-land.
The keyword is mandatory.
This keyword accepts the following parameters:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar ipr
This parameter configures a raw HDLC IP over ISDN interface.
.It Ar isp
@ -814,7 +814,7 @@ daytime range specification in the form hh:mm-hh:mm.
The weekdays are specified as numbers from 0 to 6 and the number 7 for
holidays:
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar 0
Sunday
.It Ar 1
@ -834,7 +834,7 @@ a Holiday
.El
.Pp
The following examples describe the "T-ISDN xxl" tariff of the german Telekom:
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar 1,2,3,4,5,6,09:00-18:00
Monday through Saturday, daytime 9:00 to 18:00
.It Ar 1,2,3,4,5,6,18:00-9:00
@ -847,7 +847,7 @@ The use of this keyword is optional.
.El
.El
.Sh IDLETIME CALCULATION AND SHORT-HOLD MODE
.Bl -tag -width incoming calls
.Bl -tag -width "incoming calls
.It Li incoming calls
It is assumed that the calling side knows most about charging structures and
such and as a consequence only the keyword
@ -865,7 +865,7 @@ is used as a last resort and is therefore set much higher than a charging
unit time: typical values are one to five minutes.
.It Li outgoing calls
Outgoing call disconnect time can be setup in one of three ways:
.Bl -tag -width shorthold mode
.Bl -tag -width "shorthold mode
.It Li simple mode
For simple mode, the
.Em idle-algorithm-outgoing

View File

@ -95,7 +95,6 @@ Reset the Q.921 (D-channel layer 2) frame receive/transmit statistics to zero.
.Pp
.Sh FILES
/dev/i4bctl
.Sh EXAMPLES
The command:
.Bd -literal -offset indent
@ -103,7 +102,6 @@ isdndebug -g
.Ed
.Pp
displays the current debugging level for all ISDN layers
.Sh AUTHORS
The
.Nm

View File

@ -57,7 +57,7 @@ hang up a possibly open telefone connection on the selected interface.
dial the specified number on the selected interface.
.It Fl u
Set the unit number to specify the interface used.
.Pp
.El
.Sh FILES
/dev/i4bteld<n>
.Sh EXAMPLES

View File

@ -74,7 +74,7 @@ as the command string to execute for playing a voice message to some audio
output facility. The characters
.Em %s
are replaced by the currently selected filename. The default string is
.Em cat %s | alaw2ulaw >/dev/audio
.Dq Li cat %s \&| alaw2ulaw >/dev/audio .
.It Fl t
The value for
.Ar timeout
@ -87,10 +87,8 @@ The screen output should be obvious. If in doubt, consult the source.
.Xr isdnd 8
.Xr isdnd.rc 5
.Xr i4btel 4
.Sh BUGS
Still two or more left.
.Sh AUTHORS
The
.Nm

View File

@ -83,7 +83,6 @@ enhances it as a real self test and setup-verification tool!
.Nm Isdntest
does almost no error checking and error recovery, so unexpected
hangs or crashes may occur.
.Sh EXAMPLES
For the following example, it is assumed that a machine with isdn4bsd
installed is connected to an S0 bus and that one of the valid MSN's (MSN = Multiple Subscriber Number
@ -103,8 +102,9 @@ and disconnect after 5 seconds.
has to be finished by the user by entering Control-C.
.Pp
.Sh FILES
/dev/i4b
.Bl -tag -width indent
.It Pa /dev/i4b
.El
.Sh AUTHORS
The
.Nm

View File

@ -33,7 +33,7 @@
.Os
.Sh NAME
.Nm i4btrc
.Nd isdn4bsd ISDN interface driver for D and B channel tracing
.Nd "isdn4bsd ISDN interface driver for D and B channel tracing
.Sh FreeBSD SYNOPSIS
.Cd pseudo-device \&"i4btrc\&" Op count
.Sh NetBSD SYNOPSIS

View File

@ -35,7 +35,6 @@
.Nm isic
.Nd isdn4bsd Siemens ISDN Chipset device driver
.Sh FreeBSD SYNOPSIS (FreeBSD >= 4.0)
.Br
.Pp
Asuscom ISDNLink 128K (ISA PnP):
.Cd options \&"ASUSCOM_IPAC\&"
@ -185,7 +184,7 @@ of larger FIFO buffers) is also supported.
.Pp
.Sh SUPPORTED CARDS
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar Teles S0/8, Dr. Neuhaus Niccy 1008, Creatix ISDN-S0/8
.Pp
The required (optional for NetBSD)

View File

@ -49,7 +49,7 @@ based on the Winbond W6692 chip.
.Pp
.Sh SUPPORTED CARDS
.Pp
.Bl -tag -width Ds -compact -offset
.Bl -tag -width Ds -compact
.It Ar ASUSCOM P-IN100-ST-D
.Pp
.It Ar Dynalink IS64PPH

View File

@ -706,7 +706,7 @@ Important error messages and their explanations are:
.Bl -ohang -compact
.It Xo
.Ar service Ns / Ns Ar protocol
.No " server failing (looping), service terminated."
.No "server failing (looping), service terminated."
.Xc
The number of requests for the specified service in the past minute
exceeded the limit.

View File

@ -70,7 +70,7 @@
statistics
.Sh SYNOPSIS
.Nm
.Op Fl CdhKIoT?
.Op Fl CdhKIoT?\&
.Op Fl c Ar count
.Op Fl M Ar core
.Op Fl n Ar devs
@ -141,10 +141,10 @@ miliseconds per seek are displayed.
.It Fl t
Specify which types of devices to display. There are three different
categories of devices:
.Pp
.Bl -tag -width indent -compact
.It device type:
.Bl -tag -width 123456789 -compact
.Bl -tag -width 9n -compact
.It da
Direct Access devices
.It sa
@ -174,7 +174,7 @@ Floppy devices
.El
.Pp
.It interface:
.Bl -tag -width 123456789 -compact
.Bl -tag -width 9n -compact
.It IDE
Integrated Drive Electronics devices
.It SCSI
@ -184,7 +184,7 @@ Any other device interface
.El
.Pp
.It passthrough:
.Bl -tag -width 123456789 -compact
.Bl -tag -width 9n -compact
.It pass
Passthrough devices
.El
@ -217,7 +217,7 @@ seconds between each display.
If no repeat
.Ar count
is specified, the default is infinity.
.It Fl ?
.It Fl ?\&
Display a usage statement and exit.
.El
.Pp

View File

@ -173,6 +173,7 @@ for details.
.Bl -tag -width /usr/share/syscons/keymaps/foo_bar -compact
.It Pa /usr/share/syscons/keymaps/*
keyboard map files
.El
.Sh EXAMPLES
The following command will load the keyboard map file
.Pa /usr/share/syscons/keymaps/ru.koi8-r.kbd .

View File

@ -23,7 +23,6 @@
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.Dd March 25, 1995
.Dt KBDMAP 1
.Os FreeBSD
@ -96,8 +95,8 @@ Show currently supported languages and exit.
More warnings.
.El
.Sh ENVIRONMENT
.Bl -tag -width /etc/master.passwdxx -compact
.Ev LANG
.Bl -tag -width LANG -compact
.It Ev LANG
preferred language
.El
.Sh FILES

View File

@ -164,7 +164,6 @@ particular command.
.Pp
Erase all entries in the kernel security association table.
.El
.Pp
The following values for
.Ar command
@ -216,7 +215,6 @@ An EOF will also end interaction with
.Xr route 4 ,
.Xr gated 8 ,
.Xr routed 8
.Sh HISTORY
The
.Nm

View File

@ -47,7 +47,7 @@
.Op Fl n Ar num
.Op Ar name ...
.Sh DESCRIPTION
.Nm Lp
.Nm \&Lp
is a front-end to the print spooler as required by the
.St -p1003.2
specification. It effectively invokes

View File

@ -147,6 +147,7 @@ Place the jobs in the order listed at the top of the printer queue.
Enable everything and start a new printer daemon.
Undoes the effects of
.Ic down .
.El
.Sh FILES
.Bl -tag -width /var/spool/*/lockx -compact
.It Pa /etc/printcap

View File

@ -105,7 +105,7 @@ or
Second, if the
.Li rs
capability is specified in the
.Xr printcap
.Xr printcap 5
entry for the printer being accessed,
.Em lpr
requests will only be honored for those users with accounts on the

View File

@ -43,8 +43,8 @@
.Op Fl a
.Op Fl l
.Op Fl P Ns Ar printer
.Op job # ...
.Op user ...
.Op job # ...\&
.Op user ...\&
.Sh DESCRIPTION
.Nm Lpq
examines the spooling area used by

View File

@ -72,7 +72,7 @@ Refer to
.Xr termcap 5
for a description of the file layout.
.Bl -column Namexxx Typexx "/var/spool/lpdxxxxx"
.Sy Name Type Default Description
.Sy "Name Type Default Description
.It "af str" Ta Dv NULL Ta No "name of accounting file"
.It "br num none if lp is a tty, set the baud rate"
.Pf ( Xr ioctl 2

View File

@ -42,8 +42,8 @@
.Nm
.Op Fl P Ns Ar printer
.Op Fl
.Op job # ...
.Op Ar user ...
.Op job # ...\&
.Op Ar user ...\&
.Sh DESCRIPTION
.Nm Lprm
will remove a job, or jobs, from a printer's spool queue.

View File

@ -253,9 +253,8 @@ comparison, use:
.Pp
.Dl # mergemaster -sw 110
.Sh FILES
.Bl -tag -width $HOME/.mergemasterrc -compact
.Pa $HOME/.mergemasterrc
.Pp
.Bl -ohang
.It Pa $HOME/.mergemasterrc
.Nm
will . (source) this file if it exists.
Command line options
@ -305,8 +304,8 @@ with all values commented out:
# and/or after the script has finished its work
#MM_PRE_COMPARE_SCRIPT=
#MM_EXIT_SCRIPT=
.Ed
.El
.Sh SEE ALSO
.Xr cvs 1 ,
.Xr diff 1 ,

View File

@ -129,6 +129,7 @@ Upon startup,
.Nm
writes its pid to the file
.Pa /var/run/mrouted.pid .
.El
.Sh CONFIGURATION
.Nm Mrouted
automatically configures itself to forward on all multicast-capable
@ -253,7 +254,7 @@ or
A remote hostname may only be used if
it maps to a single IP address.
A tunnel must be configured on both routers before it can be used.
.Pp
Be careful that the unicast route to the remote address goes out the
interface specified by the
.Ar "local-addr|ifname"
@ -284,7 +285,7 @@ to be forwarded to the given interface or tunnel. It is used to control the
scope of multicast datagrams. (The TTL of forwarded packets is only compared
to the threshold, it is not decremented by the threshold. Every multicast
router decrements the TTL by exactly 1.) The default threshold is 1.
.Pp
In general, all multicast routers
connected to a particular subnet or tunnel should
use the same metric and threshold for that subnet or tunnel.
@ -345,7 +346,7 @@ Only one of
or
.Li deny
commands may be used on a given interface.
.Pp
The list of routes follows the
.Li accept
or
@ -361,7 +362,7 @@ denys only the default route. The default route may also be specified
with the
.Li default
keyword.
.Pp
The
.Ar bidir
keyword enables bidirectional route filtering; the filter will be applied

View File

@ -209,7 +209,7 @@ Set the time to wait for a trace response to
seconds (default 3 seconds).
.El
.Sh USAGE
.Ss How It Works
.Ss "How It Works"
The technique used by the
.Nm traceroute
tool to trace unicast network paths will not work for IP multicast
@ -488,7 +488,9 @@ in no response because there was a node running an old version of
.Nm mrouted
that did not implement the multicast traceroute function, so
.Nm
switched to hop-by-hop mode. The \*(lqOutput pruned\*(rq error code
switched to hop-by-hop mode. The
.Dq Output pruned
error code
indicates that traffic for group 224.2.143.24 would not be forwarded.
.Pp
.Bd -literal

View File

@ -43,7 +43,7 @@ Set or reset ALLMULTI mode on interface
.It Ic p Ar ifname Ar 1/0
Set or reset promiscuous mode on interface
.Ar ifname .
.It Ic ?
.It Ic ?\&
List legal commands.
.It Ic q
Quit the program.

View File

@ -273,7 +273,7 @@ Specifying a directory will cause subsequent files to be searched
for in that directory hierarchy.
Which brings us to the last type of line in a specification: a line
containing only the string
.Dq Pa \&..
.Dq Pa ..\&
causes the current directory
path to ascend one level.
.Pp

View File

@ -136,15 +136,15 @@ program itself and do not result in
NTP mode 7 requests being sent to a server.
These are described following:
.Bl -tag -width indent
.It Ic ? Op Ar command_keyword
.It Ic ?\& Op Ar command_keyword
.It Ic help Op Ar command_keyword
A
.Ic ?
.Ic ?\&
by itself will print a list of all the command keywords
known to this incarnation of
.Nm .
A
.Ic ?
.Ic ?\&
followed by a command keyword will print function and
usage information about the command.
This command is probably a better

View File

@ -108,15 +108,15 @@ program itself and do not result in NTP mode 6 requests being sent to a
server.
These are described following.
.Bl -tag -width indent
.It Ic ? Op Ar command_keyword
.It Ic ?\& Op Ar command_keyword
.It Ic help Op Ar command_keyword
A
.Ic ?
.Ic ?\&
by itself will print a list of all the command keywords
known to this incarnation of
.Nm .
A
.Ic ?
.Ic ?\&
followed by a command keyword will print function and
usage information about the command.
This command is probably a better

View File

@ -153,7 +153,7 @@ and lists the PC-CARD cards recognized by
.Nm ,
and the kernel drivers and devices that are used to
interface to the card.
.Pp
.El
.Sh FILES
.Bl -tag -width /etc/defaults/pccard.conf -compact
.It Pa /etc/defaults/pccard.conf

View File

@ -72,6 +72,7 @@ Specifying
with the
.Fl c
option gives a verbose listing of the compile-time options.
.El
.Sh DIAGNOSTICS
.Bl -tag -width Ds -compact
.Pp

View File

@ -93,12 +93,14 @@ To be used in conjunction with the
.Fl l
option.
This is the default behaviour.
.El
.Sh FILES
.Bl -tag -width /usr/share/misc/keycap.pcvt -compact
.It Pa /usr/share/misc/keycap.pcvt
Keyboard capabilities data base file if nothing else was chosen during installation.
.It Pa /dev/console
Keyboard raw device.
.El
.Sh SEE ALSO
.Xr keycap 3 ,
.Xr keycap 5

View File

@ -63,10 +63,10 @@ upper case and blanks for readability.
.Sh CAPABILITIES
.Pp
.Bl -column indent indent
.Sy Name Type Description
.Sy "Name Type Description
.It "de bool Resets Keyboard mapping to compiled-in default"
.It "D<n> bool Disables key <n> completely"
.It "
.It "m<n> num specify key numbers for ALT keys
.It "l<n> num specify key numbers for ALTGR keys
.It "h<n> num specify key numbers for SHIFT keys
@ -75,19 +75,18 @@ upper case and blanks for readability.
.It "sh<n> num specify key number for the SHIFT LOCK key
.It "nl<n> num specify key number for the NUM LOCK key
.It "sc<n> num specify key number for the SCROLL LOCK key
.It "
.It "K<n> str bind a string to a unshifted (normal) key
.It "S<n> str bind a string to a shifted key
.It "C<n> str bind a string to a control key
.It "A<n> str bind a string to a altgr key
.It "
.It "tc str Entry of similar map \- must be last."
.El
.Pp
Parameter <n> describing the key number can have values from 1 to 128.
.Pp
A string parameter may have up to 15 characters.
.Pp
.Ss A Sample Entry
The following entry, which describes a test entry, is among the very
@ -99,7 +98,6 @@ file as of this writing.
tt\||test\||Test entry which swaps y and z:\e
:K22=z:S22=Z:C22=\e032:\e
:K46=y:S46=Y:C46=\e031:
.Ed
.Pp
Entries may continue onto multiple lines by giving a \e as the last
@ -118,15 +116,15 @@ File containing keyboard mapping descriptions.
The entry
.Dq Li l1#60
sets the keynumber for the ALTGR key to 60.
.Pp
The entry
.Dq Li K100=hugo
binds the string 'hugo' to the key number 100.
.Pp
The entry
.Dq Li K100=^D
binds the control character EOT (0x04) to the key number 100.
.Pp
The entry
.Dq Li K100=\e000
binds the control character NUL (0x00) to the key number 100.

View File

@ -134,14 +134,12 @@ Naturally, option
.Fl p
is available only for VGA boards.
Three flavors are available.
.Pp
If used with argument
.Dq Ar default ,
this flag will restore the default palette
.Po
as installed by VGA ROM BIOS after hardware reset
.Pc .
(as installed by VGA ROM BIOS after hardware reset).
.Pp
If used with argument
.Dq Ar list ,
the current VGA DAC palette entries are listed.
@ -150,7 +148,7 @@ the table index, values for red, green, and blue, and if there's a
known name for this entry, the color name.
Trailing empty table
slots (RGB values all zero) are omitted.
.Pp
Otherwise, four comma-separated arguments are expected.
The first
denotes the number of palette entry to be modified.
@ -200,7 +198,7 @@ region is reset and the cursor is placed in the home position.
The command
.Dq Li scon Fl H s Ar 28
places the current screen into HP mode and sets the screen size to 28x80.
.Pp
Invoking
.Do
.Li scon Fl p

View File

@ -52,12 +52,10 @@ silly,
.Nm
cares of all the things necessary and allows the user to access the
registers of several register groups with their symbolic names.
.Ss Options
.Bl -tag -width 10n -offset indent
.It Fl d
Turn on the grammar parser debugger.
.El
.Ss Command language
The command language of
@ -67,11 +65,11 @@ Commands are executed
line by line as they are entered.
Each line may contain any number of
semicolon-separated input/output commands.
.Pp
Symbolic register names look like:
.D1 Ao Em reggroup Ac Ao Em regnumber Ac
.Pp
.D1 Ao Em reggroup Ac Aq Em regnumber
.Pp
with
.Aq Em regnumber
being any hexadecimal number
@ -93,52 +91,46 @@ standing for the
or
.Em Timing sequencer ,
respectively.
.Pp
An input instruction has the form
.D1 Ao Em regname Ac ?
.Pp
.D1 Ao Em regname Ac \&?
.Pp
and will cause
.Nm
to output a line like
.Bd -ragged -offset indent
.Ao Em regname Ac \& = 0x Ns
.Aq Em number
.Aq Em regname
.No = 0x Ns Aq Em number
.Ed
.Pp
An output instruction looks like
.Bd -ragged -offset indent
.Ao Em regname Ac =
.Aq Em number
.Ed
.Pp
Spaces or Tabs between the
.Aq Em reggroup ,
the
.Aq Em regnumber ,
or any of the other tokens are ignored.
They are not required anyway.
.Pp
The
.Dq Em mi
needs a single unused argument to satisfy the syntax :-) (-hm).
.Ss Access control
The caller must have uid 0 in order to gain the required access to
the IO registers.
.Sh HISTORY
This program is considered
.Dq hackware .
It has been developed in order to simplify the process of developing other
software that needs to program the Video Graphics Array.
.Pp
Remember, to use this program, your kernel has to be compiled with XSERVER
being defined !
being defined!
.Sh AUTHORS
The program has been contributed by
.An J\(:org Wunsch ,

View File

@ -34,7 +34,7 @@
.Os
.Sh NAME
.Nm pim6dd.conf
.Nd config file for pim6dd, PIM for IPv6 dense mode daemon
.Nd "config file for pim6dd, PIM for IPv6 dense mode daemon
.\"
.Sh DESCRIPTION
The file describes how the

View File

@ -59,7 +59,7 @@ are comments.
.Pp
The following statements can be specified in the configuration file.
.Pp
.Bl -tag -width Ds -compact
.Bl -tag -width Ds
.It Xo
.Ic log
.Ar option...
@ -294,7 +294,7 @@ specifies the threshold in bits per second, and
.Ic interval
specifies the interval of checking the rate in seconds.
The default values are 50000 and 20, respectively.
\"
.\"
.It Xo
.Ic switch_data_threshold Ic rate Ar rate Ic interval Ar interval;
.Xc

View File

@ -64,7 +64,6 @@ directives, and/or use the
.Xr pkg_info 1
command to examine the package file.
.Ef
.Sh OPTIONS
The following command line arguments are supported:
.Bl -tag -width indent
@ -211,7 +210,7 @@ ftp.
is fairly simple. It extracts each package's "packing list"
into a special staging directory, parses it,
and then runs through the following sequence to fully extract the contents:
.Bl -enum -indent indent
.Bl -enum
.It
Check if the package is already recorded as installed. If so,
terminate installation.
@ -263,13 +262,13 @@ arguments:
.Ar pkg-name
.Ar PRE-INSTALL
.Ed
.Pp
where
.Ar pkg-name
is the name of the package in question and
.Ar PRE-INSTALL
is a keyword denoting this as the preinstallation phase.
.Pp
.Cm Note:
The
.Ar PRE-INSTALL
@ -326,7 +325,7 @@ where
is the name of the package in question and
.Ar POST-INSTALL
is a keyword denoting this as the post-installation phase.
.Pp
.Cm Note:
The
.Ar POST-INSTALL
@ -336,8 +335,8 @@ are given during package creation time (using the
and
.Cm Fl I
flags to
.Xr pkg_create 1 ).
.Xr pkg_create 1 ) .
.Pp
Reasoning behind passing keywords such as
.Ar POST-INSTALL
and

View File

@ -115,7 +115,7 @@ program (or shell script). It will be invoked automatically when the
package is later installed.
It will be passed the package's name as the
first argument.
.Pp
.Cm Note:
if the
.Cm Fl I
@ -156,7 +156,7 @@ program (or shell script). It will be invoked automatically when the
package is later (if ever) de-installed.
It will be passed the package's
name as the first argument.
.Pp
.Cm Note:
if the
.Cm Fl K
@ -175,7 +175,6 @@ executable program (or shell script). It will be invoked automatically when
the package is later de-installed.
It will be passed the package's name as
the first argument.
.It Fl r Ar rscript
Set
.Ar rscript
@ -298,12 +297,12 @@ and the last extracted file was
.It Cm "%F"
Expands to the last filename extracted (as specified), in the example case
.Pa bin/emacs
.It Cm "%D"
.It Cm "\&%D"
Expand to the current directory prefix, as set with
.Cm @cwd ,
in the example case
.Pa /usr/local .
.It Cm "%B"
.It Cm "\&%B"
Expand to the
.Dq basename
of the fully qualified filename, that
@ -315,7 +314,7 @@ Expand to the
filename
part of the fully qualified name, or
the converse of
.Cm %B ,
.Cm \&%B ,
being in the example case,
.Pa emacs .
.El

View File

@ -63,7 +63,6 @@ directives, and/or use the
.Xr pkg_info 1
command to examine the installed package control files.
.Ef
.Sh OPTIONS
The following command line options are supported:
.Bl -tag -width indent
@ -96,8 +95,6 @@ the package.
Force removal of the package, even if a dependency is recorded or the
deinstall or require script fails.
.El
.Pp
.Sh TECHNICAL DETAILS
.Nm
does pretty much what it says. It examines installed package records in
@ -156,7 +153,7 @@ where
is the name of the package in question and
.Ar DEINSTALL
is a keyword denoting this as the pre-deinstallation phase.
.Pp
.Cm Note:
The
.Ar DEINSTALL
@ -176,7 +173,7 @@ all files are removed. It is this script's responsibility to clean up any
additional messy details around the package's installation, and leave the
system (hopefully) in the same state that it was prior to the installation
of the package.
.Pp
The
.Nm post-deinstall
script is called as:
@ -190,7 +187,7 @@ where
is the name of the package in question and
.Ar POST-DEINSTALL
is a keyword denoting this as the post-deinstallation phase.
.Pp
.Cm Note:
The
.Ar POST-DEINSTALL
@ -201,14 +198,14 @@ and
.Cm Fl K
flags to
.Xr pkg_create 1 ).
.Pp
Reasoning behind passing keywords such as
.Ar DEINSTALL
and
.Ar POST-DEINSTALL
is that it lets you potentially write only one program/script that handles
all aspects of installation and deletion.
.Pp
But experience has proved that this is a lot more difficult to maintain and
is not as advantageous as having separate scripts that handle each aspect of
installation and deinstallation.
@ -233,6 +230,7 @@ specifies an alternative location for the installed package database.
.Bl -tag -width /var/db/pkg -compact
.It Pa /var/db/pkg
Default location of the installed package database.
.El
.Sh SEE ALSO
.Xr pkg_add 1 ,
.Xr pkg_create 1 ,

View File

@ -129,12 +129,14 @@ for
.Xr mktemp 3
to fill in with a unique ID.
.Bd -filled -offset indent -compact
Note: This should really not be necessary with pkg_info,
Note: This should really not be necessary with
.Nm ,
since very little information is extracted from each package
and one would have to have a very small
.Pa /tmp
indeed to overflow it.
.Ed
.El
.Sh TECHNICAL DETAILS
Package info is either extracted from package files named on the
command line, or from already installed package information

View File

@ -101,6 +101,7 @@ The installed package exists in the index but for some reason,
.Nm
was unable to compare the version number of the installed package
with the corresponding entry in the index.
.El
.Sh OPTIONS
.Nm
supports several command-line arguments:

View File

@ -242,7 +242,7 @@ In direct mode,
acts as server which accepts incoming
.Em PPP
connections on stdin/stdout.
.It Supports PAP and CHAP (rfc 1994, 2433 and 2759) authentication.
.It "Supports PAP and CHAP (rfc 1994, 2433 and 2759) authentication.
With PAP or CHAP, it is possible to skip the Unix style
.Xr login 1
procedure, and use the
@ -1609,7 +1609,7 @@ set filter
.Ar name
.Ar rule-no
.Ar action
.Op \&!
.Op !\&
.Oo
.Op host
.Ar src_addr Ns Op / Ns Ar width
@ -1663,7 +1663,7 @@ the new rule number (rather than the next rule number).
The
.Ar action
may optionally be followed with an exclamation mark
.Pq Dq ! ,
.Pq Dq \&! ,
telling
.Nm
to reverse the sense of the following match.
@ -2635,7 +2635,7 @@ Type
is actually specified as
.Dq PPP Magna-link Variable Resource Compression
in
.Pa rfc1975 Ns No !
.Pa rfc1975 Ns !
.Nm
is capable of negotiating with
.Nm pppd ,
@ -3111,7 +3111,7 @@ is replaced with the interface address and
is replaced with the interface destination (peer) address.
.Pp
If the
.Ar add!
.Ar add!\&
command is used
.Pq note the trailing Dq \&! ,
then if the route already exists, it will be updated as with the
@ -3372,7 +3372,7 @@ command below.
This is replaced with the date on which
.Nm
was compiled.
.It Li DNS0 No " & " Li DNS1
.It Li DNS0 & DNS1
These are replaced with the primary and secondary nameserver IP numbers.
If nameservers are negotiated by IPCP, the values of these macros will change.
.It Li ENDDISC
@ -3467,7 +3467,7 @@ If
.Dq ccp
is specified, only the relevant compression layer is closed.
If the
.Dq \&!
.Dq !\&
is used, the compression layer will remain in the closed state, otherwise
it will re-enter the STOPPED state, waiting for the peer to initiate
further CCP negotiation.
@ -3500,7 +3500,7 @@ is specified as
the default route is deleted.
.Pp
If the
.Ar delete!
.Ar delete!\&
command is used
.Pq note the trailing Dq \&! ,
.Nm
@ -3575,7 +3575,7 @@ Instead of specifying
can be used
.Pq with no space between \&it and Ar addr .
If the given address already exists, the command fails unless the
.Dq \&!
.Dq !\&
is used - in which case the previous interface address entry is overwritten
with the new one, allowing a change of netmask or peer address.
.Pp
@ -3606,15 +3606,15 @@ is not in the OPENED state and is not in
mode, all interface addresses are deleted.
.Pp
.It iface delete Ns Xo
.Op \&! Ns
.No |rm Ns Op \&!
.Op !\& Ns
.No |rm Ns Op !\&
.Ar addr
.Xc
This command deletes the given
.Ar addr
from the interface.
If the
.Dq \&!
.Dq !\&
is used, no error is given if the address isn't currently assigned to
the interface (and no deletion takes place).
.It iface show
@ -3883,7 +3883,7 @@ This sets the authentication key (or password) used in client mode
PAP or CHAP negotiation to the given value.
It also specifies the
password to be used in the dial or login scripts in place of the
.Sq \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\P
.Sq \eP
sequence, preventing the actual password from being logged.
If
.Ar command
@ -3908,7 +3908,7 @@ and
values.
.Pp
If the
.Dq \&!
.Dq !\&
is doubled up
.Pq to Dq \&!! ,
it is treated as a single literal
@ -4130,7 +4130,7 @@ is specified,
.Nm
will expect the peer to specify the number.
.It set cd Oo
.No off| Ns Ar seconds Ns Op \&!
.No off| Ns Ar seconds Ns Op !\&
.Oc
Normally,
.Nm
@ -4299,9 +4299,9 @@ be of the format
.Op \&: Ns Ar provider Ns
.Xc
or be of the format
.Ar host Ns No : Ns Ar port Ns Oo
.No /tcp|udp
.Oc .
.Sm off
.Ar host : port Op /tcp|udp .
.Sm on
.Pp
If it begins with an exclamation mark, the rest of the device name is
treated as a program name, and that program is executed when the device
@ -4382,34 +4382,34 @@ It is possible to specify some special
.Sq values
in your chat script as follows:
.Bd -unfilled -offset indent
.It Li \\\\\\\\\\\\\\\\c
.It Li \ec
When used as the last character in a
.Sq send
string, this indicates that a newline should not be appended.
.It Li \\\\\\\\\\\\\\\\d
.It Li \ed
When the chat script encounters this sequence, it delays two seconds.
.It Li \\\\\\\\\\\\\\\\p
.It Li \ep
When the chat script encounters this sequence, it delays for one quarter of
a second.
.It Li \\\\\\\\\\\\\\\\n
.It Li \en
This is replaced with a newline character.
.It Li \\\\\\\\\\\\\\\\r
.It Li \er
This is replaced with a carriage return character.
.It Li \\\\\\\\\\\\\\\\s
.It Li \es
This is replaced with a space character.
.It Li \\\\\\\\\\\\\\\\t
.It Li \et
This is replaced with a tab character.
.It Li \\\\\\\\\\\\\\\\T
.It Li \eT
This is replaced by the current phone number (see
.Dq set phone
below).
.It Li \\\\\\\\\\\\\\\\P
.It Li \eP
This is replaced by the current
.Ar authkey
value (see
.Dq set authkey
above).
.It Li \\\\\\\\\\\\\\\\U
.It Li \eU
This is replaced by the current
.Ar authname
value (see
@ -4432,7 +4432,7 @@ To do this, the first character of the expect or send string is an
exclamation mark
.Pq Dq \&! .
If a literal exclamation mark is required, double it up to
.Dq \&!!
.Dq !!\&
and it will be treated as a single literal
.Dq \&! .
When the command is executed, standard input and standard output are
@ -4488,7 +4488,7 @@ important that the
signs are escaped, otherwise this parser will see them as constituting
an expect-send-expect sequence.
When the
.Dq \&!
.Dq !\&
character is seen, the execution parser reads the first command as three
arguments, and then
.Xr sh 1
@ -4573,7 +4573,7 @@ It allows the user to specify a set of characters that will be
as they travel across the link.
.It set filter dial|alive|in|out Ar rule-no Xo
.No permit|deny|clear| Ns Ar rule-no
.Op \&!
.Op !\&
.Oo Op host
.Ar src_addr Ns Op / Ns Ar width
.Op Ar dst_addr Ns Op / Ns Ar width
@ -5127,7 +5127,7 @@ delay will be effective, even after
has been exceeded, so an immediate manual dial may appear to have
done nothing.
If an immediate dial is required, a
.Dq \&!
.Dq !\&
should immediately follow the
.Dq open
keyword.
@ -5409,11 +5409,11 @@ They are a good source of information.
.It
Use
.Dq help ,
.Dq nat ? ,
.Dq enable ? ,
.Dq set ?
.Dq nat \&? ,
.Dq enable \&? ,
.Dq set ?\&
and
.Dq show ?
.Dq show ?\&
to get online information about what's available.
.It
The following URLs contain useful information:

View File

@ -242,7 +242,7 @@ In direct mode,
acts as server which accepts incoming
.Em PPP
connections on stdin/stdout.
.It Supports PAP and CHAP (rfc 1994, 2433 and 2759) authentication.
.It "Supports PAP and CHAP (rfc 1994, 2433 and 2759) authentication.
With PAP or CHAP, it is possible to skip the Unix style
.Xr login 1
procedure, and use the
@ -1609,7 +1609,7 @@ set filter
.Ar name
.Ar rule-no
.Ar action
.Op \&!
.Op !\&
.Oo
.Op host
.Ar src_addr Ns Op / Ns Ar width
@ -1663,7 +1663,7 @@ the new rule number (rather than the next rule number).
The
.Ar action
may optionally be followed with an exclamation mark
.Pq Dq ! ,
.Pq Dq \&! ,
telling
.Nm
to reverse the sense of the following match.
@ -2635,7 +2635,7 @@ Type
is actually specified as
.Dq PPP Magna-link Variable Resource Compression
in
.Pa rfc1975 Ns No !
.Pa rfc1975 Ns !
.Nm
is capable of negotiating with
.Nm pppd ,
@ -3111,7 +3111,7 @@ is replaced with the interface address and
is replaced with the interface destination (peer) address.
.Pp
If the
.Ar add!
.Ar add!\&
command is used
.Pq note the trailing Dq \&! ,
then if the route already exists, it will be updated as with the
@ -3372,7 +3372,7 @@ command below.
This is replaced with the date on which
.Nm
was compiled.
.It Li DNS0 No " & " Li DNS1
.It Li DNS0 & DNS1
These are replaced with the primary and secondary nameserver IP numbers.
If nameservers are negotiated by IPCP, the values of these macros will change.
.It Li ENDDISC
@ -3467,7 +3467,7 @@ If
.Dq ccp
is specified, only the relevant compression layer is closed.
If the
.Dq \&!
.Dq !\&
is used, the compression layer will remain in the closed state, otherwise
it will re-enter the STOPPED state, waiting for the peer to initiate
further CCP negotiation.
@ -3500,7 +3500,7 @@ is specified as
the default route is deleted.
.Pp
If the
.Ar delete!
.Ar delete!\&
command is used
.Pq note the trailing Dq \&! ,
.Nm
@ -3575,7 +3575,7 @@ Instead of specifying
can be used
.Pq with no space between \&it and Ar addr .
If the given address already exists, the command fails unless the
.Dq \&!
.Dq !\&
is used - in which case the previous interface address entry is overwritten
with the new one, allowing a change of netmask or peer address.
.Pp
@ -3606,15 +3606,15 @@ is not in the OPENED state and is not in
mode, all interface addresses are deleted.
.Pp
.It iface delete Ns Xo
.Op \&! Ns
.No |rm Ns Op \&!
.Op !\& Ns
.No |rm Ns Op !\&
.Ar addr
.Xc
This command deletes the given
.Ar addr
from the interface.
If the
.Dq \&!
.Dq !\&
is used, no error is given if the address isn't currently assigned to
the interface (and no deletion takes place).
.It iface show
@ -3883,7 +3883,7 @@ This sets the authentication key (or password) used in client mode
PAP or CHAP negotiation to the given value.
It also specifies the
password to be used in the dial or login scripts in place of the
.Sq \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\P
.Sq \eP
sequence, preventing the actual password from being logged.
If
.Ar command
@ -3908,7 +3908,7 @@ and
values.
.Pp
If the
.Dq \&!
.Dq !\&
is doubled up
.Pq to Dq \&!! ,
it is treated as a single literal
@ -4130,7 +4130,7 @@ is specified,
.Nm
will expect the peer to specify the number.
.It set cd Oo
.No off| Ns Ar seconds Ns Op \&!
.No off| Ns Ar seconds Ns Op !\&
.Oc
Normally,
.Nm
@ -4299,9 +4299,9 @@ be of the format
.Op \&: Ns Ar provider Ns
.Xc
or be of the format
.Ar host Ns No : Ns Ar port Ns Oo
.No /tcp|udp
.Oc .
.Sm off
.Ar host : port Op /tcp|udp .
.Sm on
.Pp
If it begins with an exclamation mark, the rest of the device name is
treated as a program name, and that program is executed when the device
@ -4382,34 +4382,34 @@ It is possible to specify some special
.Sq values
in your chat script as follows:
.Bd -unfilled -offset indent
.It Li \\\\\\\\\\\\\\\\c
.It Li \ec
When used as the last character in a
.Sq send
string, this indicates that a newline should not be appended.
.It Li \\\\\\\\\\\\\\\\d
.It Li \ed
When the chat script encounters this sequence, it delays two seconds.
.It Li \\\\\\\\\\\\\\\\p
.It Li \ep
When the chat script encounters this sequence, it delays for one quarter of
a second.
.It Li \\\\\\\\\\\\\\\\n
.It Li \en
This is replaced with a newline character.
.It Li \\\\\\\\\\\\\\\\r
.It Li \er
This is replaced with a carriage return character.
.It Li \\\\\\\\\\\\\\\\s
.It Li \es
This is replaced with a space character.
.It Li \\\\\\\\\\\\\\\\t
.It Li \et
This is replaced with a tab character.
.It Li \\\\\\\\\\\\\\\\T
.It Li \eT
This is replaced by the current phone number (see
.Dq set phone
below).
.It Li \\\\\\\\\\\\\\\\P
.It Li \eP
This is replaced by the current
.Ar authkey
value (see
.Dq set authkey
above).
.It Li \\\\\\\\\\\\\\\\U
.It Li \eU
This is replaced by the current
.Ar authname
value (see
@ -4432,7 +4432,7 @@ To do this, the first character of the expect or send string is an
exclamation mark
.Pq Dq \&! .
If a literal exclamation mark is required, double it up to
.Dq \&!!
.Dq !!\&
and it will be treated as a single literal
.Dq \&! .
When the command is executed, standard input and standard output are
@ -4488,7 +4488,7 @@ important that the
signs are escaped, otherwise this parser will see them as constituting
an expect-send-expect sequence.
When the
.Dq \&!
.Dq !\&
character is seen, the execution parser reads the first command as three
arguments, and then
.Xr sh 1
@ -4573,7 +4573,7 @@ It allows the user to specify a set of characters that will be
as they travel across the link.
.It set filter dial|alive|in|out Ar rule-no Xo
.No permit|deny|clear| Ns Ar rule-no
.Op \&!
.Op !\&
.Oo Op host
.Ar src_addr Ns Op / Ns Ar width
.Op Ar dst_addr Ns Op / Ns Ar width
@ -5127,7 +5127,7 @@ delay will be effective, even after
has been exceeded, so an immediate manual dial may appear to have
done nothing.
If an immediate dial is required, a
.Dq \&!
.Dq !\&
should immediately follow the
.Dq open
keyword.
@ -5409,11 +5409,11 @@ They are a good source of information.
.It
Use
.Dq help ,
.Dq nat ? ,
.Dq enable ? ,
.Dq set ?
.Dq nat \&? ,
.Dq enable \&? ,
.Dq set ?\&
and
.Dq show ?
.Dq show ?\&
to get online information about what's available.
.It
The following URLs contain useful information:

View File

@ -242,11 +242,11 @@ Print the active vnodes. Each group of vnodes corresponding
to a particular filesystem is preceded by a two line header. The
first line consists of the following:
.Pp
.Df I
.Bd -filled -offset indent
.No *** MOUNT Em fstype from
on
.Em on fsflags
.De
.Ed
.Pp
where
.Em fstype
@ -261,7 +261,7 @@ the filesystem is mounted on; and
is a list
of optional flags applied to the mount (see
.Xr mount 8 ) .
.The second line is a header for the individual fields ,
The second line is a header for the individual fields,
the first part of which are fixed, and the second part are filesystem
type specific. The headers common to all vnodes are:
.Bl -tag -width indent
@ -379,8 +379,8 @@ default source of tables
.Xr iostat 8 ,
.Xr vmstat 8
.Rs
.Rt Tn UNIX Rt Implementation ,
.Ra K. Thompson
.%T UNIX Implementation
.%A K. Thompson
.Re
.Sh BUGS
Does not understand

View File

@ -43,7 +43,7 @@ and
databases.
If a host does not exist in both databases, the translation cannot
proceed and a reply will not be sent.
.Pp
By default, a request is honored only if the server
(i.e., the host that
.Nm
@ -62,13 +62,12 @@ exist.
This requirement can be overridden with the
.Fl s
flag (see below).
.Pp
In normal operation,
.Nm
forks a copy of itself and runs in
the background. Anomalies and errors are reported via
.Xr syslog 3 .
.Pp
The following options are available:
.Bl -tag -width indent

View File

@ -27,19 +27,19 @@
.Op Fl R Ar routelog
.Ek
.Bk -words
.Op Fl A Ar prefix/preflen,if1[,if2...]
.Op Fl A Ar prefix/preflen,if1[,if2...\&]
.Ek
.Bk -words
.Op Fl L Ar prefix/preflen,if1[,if2...]
.Op Fl L Ar prefix/preflen,if1[,if2...\&]
.Ek
.Bk -words
.Op Fl N Ar if1[,if2...]
.Op Fl N Ar if1[,if2...\&]
.Ek
.Bk -words
.Op Fl O Ar prefix/preflen,if1[,if2...]
.Op Fl O Ar prefix/preflen,if1[,if2...\&]
.Ek
.Bk -words
.Op Fl T Ar if1[,if2...]
.Op Fl T Ar if1[,if2...\&]
.Ek
.Bk -words
.Op Fl t Ar tag

View File

@ -91,12 +91,12 @@ disappeared permanently (eg. catastrophic hardware failure), as opposed
to transient failure of the host or an intermediate router. At present,
it will re-try notification attempts at frequent intervals for 10 minutes,
then hourly, and finally gives up after 24 hours.
.Pp
The protocol requires that symmetric monitor requests are made to both
the local and remote daemon in order to establish a monitored relationship.
This is convenient for the NFS locking protocol, but probably reduces the
usefulness of the monitoring system for other applications.
.Pp
The current implementation uses more than 1Kbyte per monitored host in
the status file (and also in VM). This may be inefficient for NFS servers
with large numbers of clients.

View File

@ -74,9 +74,9 @@ Script mode.
Configuration information is obtained from standard input.
.It Fl c Ar conf_file
Specify a configuration file where configuration information is kept.
.El
.Sh RETURN VALUES
The program exits with 0 on success, and non-zero on failures.
.El
.Sh SEE ALSO
.Xr daemon 3 ,
.Xr rrenumd.conf 5

View File

@ -94,9 +94,8 @@ can be any combination of single or multiple numerical IPv6 addrs,
or Full Qualified Domain Names.
.Ar retrycmd
has following syntax.
.\"
.Bl -tag -width Ds -compact
.Bl -tag -width Ds
.It Ic retry Ar retry-num
.Ar retry-num
specifies how many router renumbering messages are sent repeatedly.
@ -249,8 +248,8 @@ dest ff05::2;
add match-prefix fec0:0:0:: /48 use-prefix fec0:1:1:: /48 keeplen 16;
.Ed
.Pp
.\"
If your routers don't support IPv6 multicast forwarding,
you'll need to specify each destination at
.Cm dest
@ -261,8 +260,8 @@ dest fec0:0:0:1:260:8ff:fe24:fb3a fec0:0:0:2:200:eff:fe2e:dfe1 fec0:0:0:3:5254:f
add match-prefix fec0:0:0:: /48 use-prefix fec0:1:1:: /48 keeplen 16;
.Ed
.Pp
.\"
If you are going to do renumbering, then following procedure will be natural.
.Bl -enum -offset indent
.It
@ -280,8 +279,8 @@ To make sure that they are deleted, send new router
renumbering message, which specifies old prefixes as match
prefix, and no use prefix.
.El
.Pp
.\"
The following configuration file will do 1 and 2.
.\"
.Bd -literal -offset indent
@ -295,8 +294,8 @@ seqnum 1 {
change match-prefix fec0:1:1:: /48 use-prefix fec0:1:1:: /48 keeplen 16 vltime d7 pltime 0 rrf_decrvalid on rrf_decrprefd on;
};
.Ed
.Pp
.\"
And the following configuration file will do 3. (should be
used for the router renumbering message to be sent 1 week
afterward)
@ -306,8 +305,8 @@ dest ff05::2;
change match-prefix fec0:1:1:: /48;
.Ed
.Pp
.\"
In the above example, only
.Cm add
and
@ -319,7 +318,6 @@ command.
command is almost same with
.Cm change
command except that it deletes all pre-defined IPv6 global address.
.Sh SEE ALSO
.Xr rrenumd 8
.Xr prefix 8

View File

@ -23,30 +23,24 @@
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.Dd July 23, 1995
.Dt SPKRTEST 8
.Os FreeBSD
.Sh NAME
.Nm spkrtest
.Nd test script for the speaker driver
.Sh DESCRIPTION
.Nm Spkrtest
is an easy to use test script for the speaker driver.
.Sh FILES
.Bl -tag -width /dev/speakerxx
.It Pa /dev/speaker
speaker device file
.El
.Sh SEE ALSO
.Xr dialog 1 ,
.Xr perl 1 ,
.Xr spkr 4
.Sh HISTORY
The
.Nm

View File

@ -117,6 +117,7 @@ firmware code to EasyConnection 8/64 class boards
firmware code to ONboard and Brumby class boards
.It Pa /dev/staliomem?
driver board control device
.El
.Sh SEE ALSO
.Xr stl 4 ,
.Xr stli 4 ,

View File

@ -128,6 +128,7 @@ immediately on start up.
.Bl -tag -width /dev/staliomem0
.It Pa /dev/staliomem0
driver control device used for statistics collection
.El
.Sh SEE ALSO
.Xr stl 4 ,
.Xr stli 4 ,

View File

@ -95,7 +95,7 @@ and
If specified,
.Ar service
is the name or number of an UDP service (see
.Xr services 5 ) Ns
.Xr services 5 )
the source packet must belong to. A
.Ar service
of

View File

@ -40,9 +40,7 @@
.Nd timed control program
.Sh SYNOPSIS
.Nm
.Oo Ar command\ \&
.Op Ar argument ...
.Oc
.Op Ar command Op Ar argument ...
.Sh DESCRIPTION
.Nm Timedc
is used to control the operation of the

View File

@ -121,10 +121,11 @@ more verbose.
.Sh FILES
.Bl -tag -width /etc/usbd.conf -compact
.It Pa /etc/usbd.conf
.It /dev/usb
.It /dev/usb0
.It /dev/usb1
.It etc.
.It Pa /dev/usb
.It Pa /dev/usb0
.It Pa /dev/usb1
.It etc .
.El
.Sh SEE ALSO
.Xr usb 4 ,
.Xr usbd.conf 5

View File

@ -126,6 +126,7 @@ Commands to be executed when the action is matched:
Shell command to execute when a device is attached.
.It detach Ar string
Shell command to execute when a device is detached.
.El
.Sh EXAMPLES
A sample entry to rescan the SCSI bus on connection of a
.Tn "Iomega USB Zip Drive" :
@ -142,7 +143,7 @@ To start up moused for a newly attached mouse:
device "Mouse"
devname "ums[0-9]+"
attach "/usr/sbin/moused -p /dev/${DEVNAME} -I /var/run/moused.${DEVNAME}.pid"
.El
.Ed
.Sh FILES
.Bl -tag -width /etc/pccard.conf -compact
.It Pa /etc/usbd.conf

View File

@ -46,8 +46,10 @@
.Sh SYNOPSIS
.Nm
.Op Fl cdeguv
.Op Fl s Ar option[,option...]
.Op Fl r Ar option[,option...]
.Oo Fl s Ar option Ns
.Op , Ns Ar option Ns Ar ...\& Oc
.Oo Fl r Ar option Ns
.Op , Ns Ar option Ns Ar ...\& Oc
.Op Fl S Ar value
.Ar special_file Ar [regular_file]
.Op Ar feature

View File

@ -36,7 +36,7 @@ arguments can be used to change the value of several parameters.
Any number of
.Ar param value
pairs may be supplied.
.Bl -tag -width 15n -compat -offset indent
.Bl -tag -width 15n -offset indent
.It Va param
.Va value
.It irq

View File

@ -190,12 +190,14 @@ By default,
assumes that the local host is the NIS master; the
.Fl m
option is used to override this default.
.El
.Sh FILES
.Bl -tag -width /var/yp/Makefile -compact
.It Pa /var/yp/Makefile
the Makefile that calls
.Nm
to build the NIS databases
.El
.Sh SEE ALSO
.Xr db 3 ,
.Xr ypserv 8

View File

@ -132,6 +132,7 @@ server is added to a domain, its hostname must be added to the
ypservers map so that
.Xr yppush 8
can propagate updates on the master to all of the slaves.
.El
.Sh FILES
.Bl -tag -width /var/yp/master.passwd -compact
.It Pa /etc/bootparams

View File

@ -56,7 +56,7 @@ as local time.
.Nm Zic
will act as if the input contained a link line of the form
.Bd -literal -offset indent
Link timezone localtime
.No "Link timezone localtime
.Ed
(Note that this action has no effect on
.Fx ,
@ -78,7 +78,7 @@ time zone environment variables.
.Nm Zic
will act as if the input contained a link line of the form
.Bd -literal -offset indent
Link timezone posixrules
.No "Link timezone posixrules
.Ed
.It Fl u Ar user
After creating each output file, change its owner to
@ -113,9 +113,9 @@ Non-blank lines are expected to be of one of three types:
rule lines, zone lines, and link lines.
.Pp
A rule line has the form:
.Dl Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S
.Dl "Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S
For example:
.Dl Rule US 1967 1973 \- Apr lastSun 2:00 1:00 D
.Dl "Rule US 1967 1973 \- Apr lastSun 2:00 1:00 D
.Pp
The fields that make up a rule line are:
.Bl -tag -width "LETTER/S" -offset indent
@ -194,7 +194,7 @@ field.
Give the time of day at which the rule takes effect.
Recognized forms include:
.Pp
.Bl -tag -width "1:28:14" -offset indent -compact
.Bl -tag -width "\&1:28:14" -offset indent -compact
.It 2
time in hours
.It 2:00
@ -253,9 +253,9 @@ the variable part is null.
.El
.Pp
A zone line has the form:
.Dl Zone NAME GMTOFF RULES/SAVE FORMAT [UNTIL]
.Dl "Zone NAME GMTOFF RULES/SAVE FORMAT [UNTIL]
For example:
.Dl Zone Australia/Adelaide 9:30 Aus CST 1971 Oct 31 2:00
.Dl "Zone Australia/Adelaide 9:30 Aus CST 1971 Oct 31 2:00
The fields that make up a zone line are:
.Bl -tag -width indent
.It NAME
@ -312,9 +312,9 @@ continuation.
.El
.Pp
A link line has the form
.Dl Link LINK-FROM LINK-TO
.Dl "Link LINK-FROM LINK-TO
For example:
.Dl Link Europe/Istanbul Asia/Istanbul
.Dl "Link Europe/Istanbul Asia/Istanbul
The
.Em LINK-FROM
field should appear as the
@ -328,9 +328,9 @@ Except for continuation lines,
lines may appear in any order in the input.
.Pp
Lines in the file that describes leap seconds have the following form:
.Dl Leap YEAR MONTH DAY HH:MM:SS CORR R/S
.Dl "Leap YEAR MONTH DAY HH:MM:SS CORR R/S
For example:
.Dl Leap 1974 Dec 31 23:59:60 + S
.Dl "Leap 1974 Dec 31 23:59:60 + S
The
.Em YEAR ,
.Em MONTH ,