Add a license (1) and do some cleanup.

Approved by:	Stefan Bethke (original author, by private mail) (1)
MFC after:	1 week
This commit is contained in:
Christian Brueffer 2014-02-04 22:20:17 +00:00
parent d62289d013
commit 8f932d9f17
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=261500

View File

@ -1,4 +1,29 @@
.\" Copyright (c) 2011-2012 Stefan Bethke.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd September 20, 2013
.Dt ETHERSWITCHCFG 8
.Os
@ -35,13 +60,14 @@ The
utility is used to configure an Ethernet switch built into the system.
.Nm
accepts a number of options:
.Pp
.Bl -tag -width ".Fl f" -compact
.It Fl "f control file"
Specifies the
.Xr etherswitch 4
control file that represents the switch to be configured.
It defaults to
.Li /dev/etherswitch0 .
.Pa /dev/etherswitch0 .
.It Fl m
When reporting port information, also list available media options for
that port.
@ -54,6 +80,7 @@ options are omitted.
The config command provides access to global switch configuration
parameters.
It support the following commands:
.Pp
.Bl -tag -width ".Ar vlan_mode mode" -compact
.It Ar vlan_mode mode
Sets the switch VLAN mode (depends on the hardware).
@ -74,6 +101,7 @@ To set the register value, use the form instance.register=value.
.Ss port
The port command selects one of the ports of the switch.
It supports the following commands:
.Pp
.Bl -tag -width ".Ar pvid number" -compact
.It Ar pvid number
Sets the default port VID that is used to process incoming frames that are not tagged.
@ -88,8 +116,10 @@ for details on
and
.Ar mediaopt .
.El
.Pp
And the following flags (please note that not all flags
are supporterd by all switch drivers):
are supported by all switch drivers):
.Pp
.Bl -tag -width ".Ar addtag" -compact
.It Ar addtag
Add VLAN tag to each packet sent by the port.
@ -100,7 +130,7 @@ Strip the VLAN tags from the packets sent by the port.
.It Ar -striptag
Disable the strip VLAN tag option.
.It Ar firstlock
This options makes the switch port lock on the first MAC address it seems.
This options makes the switch port lock on the first MAC address it sees.
After that, usually you need to reset the switch to learn different
MAC addresses.
.It Ar -firstlock
@ -125,6 +155,7 @@ The reg command provides access to the registers of the switch controller.
.Ss vlangroup
The vlangroup command selects one of the VLAN groups for configuration.
It supports the following commands:
.Pp
.Bl -tag -width ".Ar vlangroup" -compact
.It Ar vlan VID
Sets the VLAN ID (802.1q VID) for this VLAN group.
@ -142,13 +173,14 @@ to indicate that frames on this port are tagged.
.Sh FILES
.Bl -tag -width /dev/etherswitch? -compact
.It Pa /dev/etherswitch?
Control file for the ethernet switch driver.
Control file for the Ethernet switch driver.
.El
.Sh EXAMPLES
Configure VLAN group 1 with a VID of 2 and make ports 0 and 5 its members
while excluding all other ports.
Port 5 will send and receive tagged frames while port 0 will be untagged.
Incoming untagged frames on port 0 are assigned to vlangroup1.
.Pp
.Dl # etherswitchcfg vlangroup1 vlan 2 members 0,5t port0 pvid 2
.Sh SEE ALSO
.Xr etherswitch 4