Options cleanup.

* GC unused options
* Move options that exist on all architectures to conf/options
* Add missing options to LINT
* Sort undocumented options list in LINT

Reviewed by:	green
This commit is contained in:
Eivind Eklund 1999-11-06 23:41:10 +00:00
parent 4fecd2e259
commit 909232c4ef
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=52944
10 changed files with 132 additions and 171 deletions

View File

@ -48,10 +48,6 @@ PSM_HOOKAPM opt_psm.h
PSM_RESETAFTERSUSPEND opt_psm.h
PSM_DEBUG opt_psm.h
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
# Atkbd options
ATKBD_DFLT_KEYMAP opt_atkbd.h
@ -62,5 +58,3 @@ KBD_MAXRETRY opt_kbd.h
KBD_MAXWAIT opt_kbd.h
KBD_RESETDELAY opt_kbd.h
KBDIO_DEBUG opt_kbd.h
BREAK_TO_DEBUGGER opt_comconsole.h

View File

@ -75,6 +75,8 @@ options BLKDEV_IOSIZE=8192
#options PQ_NOOPT # No coloring
options PQ_LARGECACHE # color for 512k/16k cache
#options PQ_HUGECACHE # color for 1024k/16k cache
#options PQ_MEDIUMCACHE # color for 64k/16k cache
#options PQ_NORMALCACHE # color for 256k/16k cache
# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
@ -627,13 +629,6 @@ options NSWAPDEV=20
# Disk quotas are supported when this option is enabled.
options QUOTA #enable disk quotas
# In particular multi-session CD-Rs might require a huge amount of
# time in order to "settle". If we are about mounting them as the
# root f/s, we gotta wait a little.
#
# The number is supposed to be in seconds.
options CD9660_ROOTDELAY=20
# If you are running a machine just as a fileserver for PC and MAC
# users, using SAMBA or Netatalk, you may consider setting this option
# and keeping all those users' directories on a filesystem that is
@ -759,8 +754,6 @@ device pt0 at scbus? # SCSI processor type
# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead
# of only when booting verbosely.
# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
# queue after a bus reset, and the number of milliseconds to
# freeze the device queue after a bus device reset.
@ -772,7 +765,6 @@ options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
options CAM_MAX_HIGHPOWER=4
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
options SCSI_REPORT_GEOMETRY
options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
# Options for the CAM CDROM driver:
@ -1559,6 +1551,10 @@ device fea0
# default.
options AHC_ALLOW_MEMIO
# The adw driver will attempt to use memory mapped I/O for all PCI
# controllers that have it configured only if this option is set.
options ADW_ALLOW_MEMIO
# By default, only 10 EISA slots are probed, since the slot numbers
# above clash with the configuration address space of the PCI subsystem,
# and the EISA probe is not very smart about this. This is sufficient
@ -2131,27 +2127,40 @@ options NSFBUFS=1024
options DEBUG_LOCKS
# More undocumented options for linting.
# Note that documenting these are not considered an affront.
options AHC_DUMP_EEPROM
options AHC_TMODE_ENABLE
options ATA_16BIT_ONLY
options ATA_STATIC_ID
options BUS_DEBUG
options CAM_DEBUG_DELAY
options CLK_CALIBRATION_LOOP
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
options TIMER_FREQ="((14318182+6)/12)"
options CLUSTERDEBUG
options COMPAT_LINUX
options CPU_UPGRADE_HW_CACHE
options DEBUG
options DEBUG_LINUX
options DEBUG_VFS_LOCKS
#options DISABLE_PSE
options ENABLE_ALART
options ENABLE_VFS_IOOPT
options FB_DEBUG
options FB_INSTALL_CDEV
options FE_8BIT_SUPPORT
options I4B_SMP_WORKAROUND
options I586_PMC_GUPROF=0x70000
options IBCS2
options KBDIO_DEBUG=2
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KEY
options KEY_DEBUG
options LOCKF_DEBUG
options LOUTB
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KBDIO_DEBUG=2
options MSGMNB=2049
options MSGMNI=41
options MSGSEG=2049
@ -2161,13 +2170,18 @@ options NBUF=512
options NETATALKDEBUG
options NMBCLUSTERS=1024
options NPX_DEBUG
#options OLTR_NO_BULLSEYE_MAC
#options OLTR_NO_HAWKEYE_MAC
#options OLTR_NO_TMS_MAC
options PANIC_REBOOT_WAIT_TIME=16
options PNPBIOS
options PSM_DEBUG=1
options SCSI_NCR_DEBUG
options SCSI_NCR_DFLT_TAGS=4
options SCSI_NCR_MAX_SYNC=10000
options SCSI_NCR_MAX_WIDE=1
options SCSI_NCR_MYADDR=7
options SC_DEBUG_LEVEL
options SC_RENDER_DEBUG
options SEMMAP=31
options SEMMNI=11
options SEMMNS=61
@ -2175,18 +2189,26 @@ options SEMMNU=31
options SEMMSL=61
options SEMOPM=101
options SEMUME=11
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SHMALL=1025
options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options SHMMAXPGS=1025
options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SIMPLELOCK_DEBUG
options SI_DEBUG
options SLIP_IFF_OPTS
options SPX_HACK
options TIMER_FREQ="((14318182+6)/12)"
options VFS_BIO_DEBUG
options ENABLE_ALART
options VM_KMEM_SIZE
options VM_KMEM_SIZE_MAX
options VM_KMEM_SIZE_SCALE
# Undocumented options covering presently broken code
#options ASUSCOM_IPAC
#options SC_VIDEO_DEBUG
# The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
@ -2195,19 +2217,9 @@ options ENABLE_ALART
# Compaq are actually DPT controllers.
#
# See sys/dev/dpt for debugging and other subtle options.
# DPT_VERIFY_HINTR Performs some strict hardware interrupts testing.
# Only use if you suspect PCI bus corruption problems
# DPT_RESTRICTED_FREELIST Normally, the freelist used by the DPT for queue
# will grow to accommodate increased use. This growth
# will NOT shrink. To restrict the number of queue
# slots to exactly what the DPT can hold at one time,
# enable this option.
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
# instruments are enabled. The tools in
# /usr/sbin/dpt_* assume these to be enabled.
# DPT_FREELIST_IS_STACK For optimal L{1,2} CPU cache utilization, enable
# this option. Otherwise, the transaction queue is
# a LIFO. I cannot measure the performance gain.
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
# If you ant the driver to handle timeouts, enable
# this option. If your system is very busy, this
@ -2222,29 +2234,16 @@ options ENABLE_ALART
# DPT_RESET_HBA Make "reset" actually reset the controller
# instead of fudging it. Only enable this if you
# are 100% certain you need it.
# DPT_SHUTDOWN_SLEEP Reset controller if a request take more than
# this number of seconds. Do NOT enable this
# unless you are really, really, really certain
# you need it. You are advised to call Simon (the
# driver author) before setting it, and NEVER,
# EVER set it to less than 300s (5 minutes).
controller dpt0
# DPT options
options DPT_VERIFY_HINTR
options DPT_RESTRICTED_FREELIST
#!CAM# options DPT_MEASURE_PERFORMANCE
options DPT_FREELIST_IS_STACK
#!CAM# options DPT_HANDLE_TIMEOUTS
options DPT_TIMEOUT_FACTOR=4
options DPT_INTR_DELAY=200 # Some motherboards need that
options DPT_LOST_IRQ
options DPT_RESET_HBA
# Don't EVER set this without having talked to Simon Shapiro on the phone
# first.
options DPT_SHUTDOWN_SLEEP=500
options DPT_ALLOW_MEMIO
# USB support
# UHCI controller

View File

@ -117,11 +117,6 @@ CD9660_ROOT opt_cd9660.h
FFS_ROOT opt_ffs.h
NFS_ROOT opt_nfsroot.h
# Multi-session CD-Rs might require a huge amount of time in order to
# "settle". If we are about mounting them as the root f/s, we gotta
# wait a little.
CD9660_ROOTDELAY opt_cd9660.h
# The union static file system has bogus static dependencies, so it isn't
# hidden yet.
UNION
@ -161,7 +156,6 @@ CAM_DEBUG_TARGET opt_cam.h
CAM_DEBUG_LUN opt_cam.h
CAM_DEBUG_FLAGS opt_cam.h
SCSI_DELAY opt_scsi.h
SCSI_REPORT_GEOMETRY opt_scsi.h
SCSI_NO_SENSE_STRINGS opt_scsi.h
SCSI_NO_OP_STRINGS opt_scsi.h
@ -180,7 +174,6 @@ SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
# Options used only in pci/ncr.c
SCSI_NCR_DEBUG opt_ncr.h
SCSI_NCR_DFLT_TAGS opt_ncr.h
SCSI_NCR_MAX_SYNC opt_ncr.h
SCSI_NCR_MAX_WIDE opt_ncr.h
SCSI_NCR_MYADDR opt_ncr.h
@ -274,16 +267,10 @@ NATM opt_natm.h
DPT_ALLOW_MEMIO opt_dpt.h # Allow PCI devices to use memory
# mapped I/O
# DPT driver debug flags
DPT_VERIFY_HINTR opt_dpt.h
DPT_USE_SINTR opt_dpt.h
DPT_RESTRICTED_FREELIST opt_dpt.h
DPT_MEASURE_PERFORMANCE opt_dpt.h
DPT_FREELIST_IS_STACK opt_dpt.h
DPT_HANDLE_TIMEOUTS opt_dpt.h
DPT_TIMEOUT_FACTOR opt_dpt.h
DPT_INTR_DELAY opt_dpt.h
DPT_LOST_IRQ opt_dpt.h
DPT_SHUTDOWN_SLEEP opt_dpt.h
DPT_RESET_HBA opt_dpt.h
# Misc debug flags. Most of these should probably be replaced with
@ -300,6 +287,10 @@ NPX_DEBUG opt_debug_npx.h
NETATALKDEBUG opt_atalk.h
SI_DEBUG opt_debug_si.h
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
# ppbus related options
PERIPH_1284 opt_ppb_1284.h
DONTPROBE_1284 opt_ppb_1284.h
@ -308,6 +299,7 @@ DONTPROBE_1284 opt_ppb_1284.h
ENABLE_ALART opt_intpm.h
# These cause changes all over the kernel
BLKDEV_IOSIZE opt_global.h
DEBUG opt_global.h
DEBUG_LOCKS opt_global.h
DEBUG_VFS_LOCKS opt_global.h
@ -317,7 +309,6 @@ INVARIANT_SUPPORT opt_global.h
INVARIANTS opt_global.h
SIMPLELOCK_DEBUG opt_global.h
VFS_BIO_DEBUG opt_global.h
BLKDEV_IOSIZE opt_global.h
# These are VM related options
VM_KMEM_SIZE opt_vm.h
@ -381,6 +372,7 @@ METEOR_DEALLOC_ABOVE opt_meteor.h
COM_ESP opt_sio.h
COM_MULTIPORT opt_sio.h
EXTRA_SIO opt_sio.h
BREAK_TO_DEBUGGER opt_comconsole.h
# Include tweaks for running under the SimOS machine simulator.
SIMOS opt_simos.h

View File

@ -48,10 +48,6 @@ PSM_HOOKAPM opt_psm.h
PSM_RESETAFTERSUSPEND opt_psm.h
PSM_DEBUG opt_psm.h
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
# Atkbd options
ATKBD_DFLT_KEYMAP opt_atkbd.h
@ -62,5 +58,3 @@ KBD_MAXRETRY opt_kbd.h
KBD_MAXWAIT opt_kbd.h
KBD_RESETDELAY opt_kbd.h
KBDIO_DEBUG opt_kbd.h
BREAK_TO_DEBUGGER opt_comconsole.h

View File

@ -21,7 +21,6 @@ PERFMON opt_perfmon.h
POWERFAIL_NMI opt_trap.h
AUTO_EOI_1 opt_auto_eoi.h
AUTO_EOI_2 opt_auto_eoi.h
BREAK_TO_DEBUGGER opt_comconsole.h
CONSPEED opt_comconsole.h
I586_PMC_GUPROF opt_i586_guprof.h
WLCACHE opt_wavelan.h
@ -78,9 +77,6 @@ SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_VIDEO_DEBUG opt_syscons.h
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
VGA_ALT_SEQACCESS opt_vga.h
VGA_DEBUG opt_vga.h
VGA_NO_FONT_LOADING opt_vga.h

View File

@ -21,7 +21,6 @@ PERFMON opt_perfmon.h
POWERFAIL_NMI opt_trap.h
AUTO_EOI_1 opt_auto_eoi.h
AUTO_EOI_2 opt_auto_eoi.h
BREAK_TO_DEBUGGER opt_comconsole.h
CONSPEED opt_comconsole.h
I586_PMC_GUPROF opt_i586_guprof.h
WLCACHE opt_wavelan.h
@ -78,9 +77,6 @@ SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_VIDEO_DEBUG opt_syscons.h
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
GDC opt_gdc.h
PSM_HOOKAPM opt_psm.h

View File

@ -75,6 +75,8 @@ options BLKDEV_IOSIZE=8192
#options PQ_NOOPT # No coloring
options PQ_LARGECACHE # color for 512k/16k cache
#options PQ_HUGECACHE # color for 1024k/16k cache
#options PQ_MEDIUMCACHE # color for 64k/16k cache
#options PQ_NORMALCACHE # color for 256k/16k cache
# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
@ -627,13 +629,6 @@ options NSWAPDEV=20
# Disk quotas are supported when this option is enabled.
options QUOTA #enable disk quotas
# In particular multi-session CD-Rs might require a huge amount of
# time in order to "settle". If we are about mounting them as the
# root f/s, we gotta wait a little.
#
# The number is supposed to be in seconds.
options CD9660_ROOTDELAY=20
# If you are running a machine just as a fileserver for PC and MAC
# users, using SAMBA or Netatalk, you may consider setting this option
# and keeping all those users' directories on a filesystem that is
@ -759,8 +754,6 @@ device pt0 at scbus? # SCSI processor type
# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead
# of only when booting verbosely.
# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
# queue after a bus reset, and the number of milliseconds to
# freeze the device queue after a bus device reset.
@ -772,7 +765,6 @@ options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
options CAM_MAX_HIGHPOWER=4
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
options SCSI_REPORT_GEOMETRY
options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
# Options for the CAM CDROM driver:
@ -1559,6 +1551,10 @@ device fea0
# default.
options AHC_ALLOW_MEMIO
# The adw driver will attempt to use memory mapped I/O for all PCI
# controllers that have it configured only if this option is set.
options ADW_ALLOW_MEMIO
# By default, only 10 EISA slots are probed, since the slot numbers
# above clash with the configuration address space of the PCI subsystem,
# and the EISA probe is not very smart about this. This is sufficient
@ -2131,27 +2127,40 @@ options NSFBUFS=1024
options DEBUG_LOCKS
# More undocumented options for linting.
# Note that documenting these are not considered an affront.
options AHC_DUMP_EEPROM
options AHC_TMODE_ENABLE
options ATA_16BIT_ONLY
options ATA_STATIC_ID
options BUS_DEBUG
options CAM_DEBUG_DELAY
options CLK_CALIBRATION_LOOP
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
options TIMER_FREQ="((14318182+6)/12)"
options CLUSTERDEBUG
options COMPAT_LINUX
options CPU_UPGRADE_HW_CACHE
options DEBUG
options DEBUG_LINUX
options DEBUG_VFS_LOCKS
#options DISABLE_PSE
options ENABLE_ALART
options ENABLE_VFS_IOOPT
options FB_DEBUG
options FB_INSTALL_CDEV
options FE_8BIT_SUPPORT
options I4B_SMP_WORKAROUND
options I586_PMC_GUPROF=0x70000
options IBCS2
options KBDIO_DEBUG=2
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KEY
options KEY_DEBUG
options LOCKF_DEBUG
options LOUTB
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KBDIO_DEBUG=2
options MSGMNB=2049
options MSGMNI=41
options MSGSEG=2049
@ -2161,13 +2170,18 @@ options NBUF=512
options NETATALKDEBUG
options NMBCLUSTERS=1024
options NPX_DEBUG
#options OLTR_NO_BULLSEYE_MAC
#options OLTR_NO_HAWKEYE_MAC
#options OLTR_NO_TMS_MAC
options PANIC_REBOOT_WAIT_TIME=16
options PNPBIOS
options PSM_DEBUG=1
options SCSI_NCR_DEBUG
options SCSI_NCR_DFLT_TAGS=4
options SCSI_NCR_MAX_SYNC=10000
options SCSI_NCR_MAX_WIDE=1
options SCSI_NCR_MYADDR=7
options SC_DEBUG_LEVEL
options SC_RENDER_DEBUG
options SEMMAP=31
options SEMMNI=11
options SEMMNS=61
@ -2175,18 +2189,26 @@ options SEMMNU=31
options SEMMSL=61
options SEMOPM=101
options SEMUME=11
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SHMALL=1025
options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options SHMMAXPGS=1025
options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SIMPLELOCK_DEBUG
options SI_DEBUG
options SLIP_IFF_OPTS
options SPX_HACK
options TIMER_FREQ="((14318182+6)/12)"
options VFS_BIO_DEBUG
options ENABLE_ALART
options VM_KMEM_SIZE
options VM_KMEM_SIZE_MAX
options VM_KMEM_SIZE_SCALE
# Undocumented options covering presently broken code
#options ASUSCOM_IPAC
#options SC_VIDEO_DEBUG
# The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
@ -2195,19 +2217,9 @@ options ENABLE_ALART
# Compaq are actually DPT controllers.
#
# See sys/dev/dpt for debugging and other subtle options.
# DPT_VERIFY_HINTR Performs some strict hardware interrupts testing.
# Only use if you suspect PCI bus corruption problems
# DPT_RESTRICTED_FREELIST Normally, the freelist used by the DPT for queue
# will grow to accommodate increased use. This growth
# will NOT shrink. To restrict the number of queue
# slots to exactly what the DPT can hold at one time,
# enable this option.
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
# instruments are enabled. The tools in
# /usr/sbin/dpt_* assume these to be enabled.
# DPT_FREELIST_IS_STACK For optimal L{1,2} CPU cache utilization, enable
# this option. Otherwise, the transaction queue is
# a LIFO. I cannot measure the performance gain.
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
# If you ant the driver to handle timeouts, enable
# this option. If your system is very busy, this
@ -2222,29 +2234,16 @@ options ENABLE_ALART
# DPT_RESET_HBA Make "reset" actually reset the controller
# instead of fudging it. Only enable this if you
# are 100% certain you need it.
# DPT_SHUTDOWN_SLEEP Reset controller if a request take more than
# this number of seconds. Do NOT enable this
# unless you are really, really, really certain
# you need it. You are advised to call Simon (the
# driver author) before setting it, and NEVER,
# EVER set it to less than 300s (5 minutes).
controller dpt0
# DPT options
options DPT_VERIFY_HINTR
options DPT_RESTRICTED_FREELIST
#!CAM# options DPT_MEASURE_PERFORMANCE
options DPT_FREELIST_IS_STACK
#!CAM# options DPT_HANDLE_TIMEOUTS
options DPT_TIMEOUT_FACTOR=4
options DPT_INTR_DELAY=200 # Some motherboards need that
options DPT_LOST_IRQ
options DPT_RESET_HBA
# Don't EVER set this without having talked to Simon Shapiro on the phone
# first.
options DPT_SHUTDOWN_SLEEP=500
options DPT_ALLOW_MEMIO
# USB support
# UHCI controller

View File

@ -75,6 +75,8 @@ options BLKDEV_IOSIZE=8192
#options PQ_NOOPT # No coloring
options PQ_LARGECACHE # color for 512k/16k cache
#options PQ_HUGECACHE # color for 1024k/16k cache
#options PQ_MEDIUMCACHE # color for 64k/16k cache
#options PQ_NORMALCACHE # color for 256k/16k cache
# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
@ -627,13 +629,6 @@ options NSWAPDEV=20
# Disk quotas are supported when this option is enabled.
options QUOTA #enable disk quotas
# In particular multi-session CD-Rs might require a huge amount of
# time in order to "settle". If we are about mounting them as the
# root f/s, we gotta wait a little.
#
# The number is supposed to be in seconds.
options CD9660_ROOTDELAY=20
# If you are running a machine just as a fileserver for PC and MAC
# users, using SAMBA or Netatalk, you may consider setting this option
# and keeping all those users' directories on a filesystem that is
@ -759,8 +754,6 @@ device pt0 at scbus? # SCSI processor type
# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
# SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead
# of only when booting verbosely.
# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
# queue after a bus reset, and the number of milliseconds to
# freeze the device queue after a bus device reset.
@ -772,7 +765,6 @@ options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
options CAM_MAX_HIGHPOWER=4
options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
options SCSI_REPORT_GEOMETRY
options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
# Options for the CAM CDROM driver:
@ -1559,6 +1551,10 @@ device fea0
# default.
options AHC_ALLOW_MEMIO
# The adw driver will attempt to use memory mapped I/O for all PCI
# controllers that have it configured only if this option is set.
options ADW_ALLOW_MEMIO
# By default, only 10 EISA slots are probed, since the slot numbers
# above clash with the configuration address space of the PCI subsystem,
# and the EISA probe is not very smart about this. This is sufficient
@ -2131,27 +2127,40 @@ options NSFBUFS=1024
options DEBUG_LOCKS
# More undocumented options for linting.
# Note that documenting these are not considered an affront.
options AHC_DUMP_EEPROM
options AHC_TMODE_ENABLE
options ATA_16BIT_ONLY
options ATA_STATIC_ID
options BUS_DEBUG
options CAM_DEBUG_DELAY
options CLK_CALIBRATION_LOOP
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
options TIMER_FREQ="((14318182+6)/12)"
options CLUSTERDEBUG
options COMPAT_LINUX
options CPU_UPGRADE_HW_CACHE
options DEBUG
options DEBUG_LINUX
options DEBUG_VFS_LOCKS
#options DISABLE_PSE
options ENABLE_ALART
options ENABLE_VFS_IOOPT
options FB_DEBUG
options FB_INSTALL_CDEV
options FE_8BIT_SUPPORT
options I4B_SMP_WORKAROUND
options I586_PMC_GUPROF=0x70000
options IBCS2
options KBDIO_DEBUG=2
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KEY
options KEY_DEBUG
options LOCKF_DEBUG
options LOUTB
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options KBDIO_DEBUG=2
options MSGMNB=2049
options MSGMNI=41
options MSGSEG=2049
@ -2161,13 +2170,18 @@ options NBUF=512
options NETATALKDEBUG
options NMBCLUSTERS=1024
options NPX_DEBUG
#options OLTR_NO_BULLSEYE_MAC
#options OLTR_NO_HAWKEYE_MAC
#options OLTR_NO_TMS_MAC
options PANIC_REBOOT_WAIT_TIME=16
options PNPBIOS
options PSM_DEBUG=1
options SCSI_NCR_DEBUG
options SCSI_NCR_DFLT_TAGS=4
options SCSI_NCR_MAX_SYNC=10000
options SCSI_NCR_MAX_WIDE=1
options SCSI_NCR_MYADDR=7
options SC_DEBUG_LEVEL
options SC_RENDER_DEBUG
options SEMMAP=31
options SEMMNI=11
options SEMMNS=61
@ -2175,18 +2189,26 @@ options SEMMNU=31
options SEMMSL=61
options SEMOPM=101
options SEMUME=11
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SHMALL=1025
options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options SHMMAXPGS=1025
options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
options SHOW_BUSYBUFS # List buffers that prevent root unmount
options SIMPLELOCK_DEBUG
options SI_DEBUG
options SLIP_IFF_OPTS
options SPX_HACK
options TIMER_FREQ="((14318182+6)/12)"
options VFS_BIO_DEBUG
options ENABLE_ALART
options VM_KMEM_SIZE
options VM_KMEM_SIZE_MAX
options VM_KMEM_SIZE_SCALE
# Undocumented options covering presently broken code
#options ASUSCOM_IPAC
#options SC_VIDEO_DEBUG
# The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
@ -2195,19 +2217,9 @@ options ENABLE_ALART
# Compaq are actually DPT controllers.
#
# See sys/dev/dpt for debugging and other subtle options.
# DPT_VERIFY_HINTR Performs some strict hardware interrupts testing.
# Only use if you suspect PCI bus corruption problems
# DPT_RESTRICTED_FREELIST Normally, the freelist used by the DPT for queue
# will grow to accommodate increased use. This growth
# will NOT shrink. To restrict the number of queue
# slots to exactly what the DPT can hold at one time,
# enable this option.
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
# instruments are enabled. The tools in
# /usr/sbin/dpt_* assume these to be enabled.
# DPT_FREELIST_IS_STACK For optimal L{1,2} CPU cache utilization, enable
# this option. Otherwise, the transaction queue is
# a LIFO. I cannot measure the performance gain.
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
# If you ant the driver to handle timeouts, enable
# this option. If your system is very busy, this
@ -2222,29 +2234,16 @@ options ENABLE_ALART
# DPT_RESET_HBA Make "reset" actually reset the controller
# instead of fudging it. Only enable this if you
# are 100% certain you need it.
# DPT_SHUTDOWN_SLEEP Reset controller if a request take more than
# this number of seconds. Do NOT enable this
# unless you are really, really, really certain
# you need it. You are advised to call Simon (the
# driver author) before setting it, and NEVER,
# EVER set it to less than 300s (5 minutes).
controller dpt0
# DPT options
options DPT_VERIFY_HINTR
options DPT_RESTRICTED_FREELIST
#!CAM# options DPT_MEASURE_PERFORMANCE
options DPT_FREELIST_IS_STACK
#!CAM# options DPT_HANDLE_TIMEOUTS
options DPT_TIMEOUT_FACTOR=4
options DPT_INTR_DELAY=200 # Some motherboards need that
options DPT_LOST_IRQ
options DPT_RESET_HBA
# Don't EVER set this without having talked to Simon Shapiro on the phone
# first.
options DPT_SHUTDOWN_SLEEP=500
options DPT_ALLOW_MEMIO
# USB support
# UHCI controller

View File

@ -21,7 +21,6 @@ PERFMON opt_perfmon.h
POWERFAIL_NMI opt_trap.h
AUTO_EOI_1 opt_auto_eoi.h
AUTO_EOI_2 opt_auto_eoi.h
BREAK_TO_DEBUGGER opt_comconsole.h
CONSPEED opt_comconsole.h
I586_PMC_GUPROF opt_i586_guprof.h
WLCACHE opt_wavelan.h
@ -78,9 +77,6 @@ SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_VIDEO_DEBUG opt_syscons.h
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
VGA_ALT_SEQACCESS opt_vga.h
VGA_DEBUG opt_vga.h
VGA_NO_FONT_LOADING opt_vga.h

View File

@ -21,7 +21,6 @@ PERFMON opt_perfmon.h
POWERFAIL_NMI opt_trap.h
AUTO_EOI_1 opt_auto_eoi.h
AUTO_EOI_2 opt_auto_eoi.h
BREAK_TO_DEBUGGER opt_comconsole.h
CONSPEED opt_comconsole.h
I586_PMC_GUPROF opt_i586_guprof.h
WLCACHE opt_wavelan.h
@ -78,9 +77,6 @@ SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_VIDEO_DEBUG opt_syscons.h
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
GDC opt_gdc.h
PSM_HOOKAPM opt_psm.h