Remove ALLWINNER kernel config file, all release image for SMP Allwinner

board uses GENERIC and it's not updated for newer SoC.

sys/arm/conf/ALLWINNER

@@ -1,137 +0,0 @@
-#
-# ALLWINNER -- Custom configuration for the Allwinner A20, A31, A31S, A83T,
-# and H3 ARM SoCs.
-#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD$
-#
-#NO_UNIVERSE
-
-ident		ALLWINNER
-
-include 	"std.armv6"
-include 	"../allwinner/std.allwinner"
-
-options 	INTRNG
-
-options 	SOC_ALLWINNER_A20
-options 	SOC_ALLWINNER_A31
-options 	SOC_ALLWINNER_A31S
-options 	SOC_ALLWINNER_A83T
-options 	SOC_ALLWINNER_H3
-
-options 	SCHED_ULE		# ULE scheduler
-options 	SMP			# Enable multiple cores
-options 	PLATFORM
-options 	PLATFORM_SMP
-options 	MULTIDELAY
-
-# NFS root from boopt/dhcp
-#options 	BOOTP
-#options 	BOOTP_NFSROOT
-#options 	BOOTP_COMPAT
-#options 	BOOTP_NFSV3
-#options 	BOOTP_WIRED_TO=dwc0
-
-# EXT_RESOURCES pseudo devices
-options 	EXT_RESOURCES
-device		clk
-device		phy
-device		hwreset
-device		regulator
-
-# CPU frequency control
-device		cpufreq
-
-# Interrupt controller
-device		gic
-
-# ARM Generic Timer
-device		generic_timer
-
-# MMC/SD/SDIO Card slot support
-device		mmc			# mmc/sd bus
-device		mmcsd			# mmc/sd flash cards
-
-# ATA controllers
-device		ahci			# AHCI-compatible SATA controllers
-#device		ata			# Legacy ATA/SATA controllers
-
-# Console and misc
-device		uart
-device		uart_snps
-device		pty
-device		snp
-device		md
-device		random			# Entropy device
-
-# I2C support
-device		iicbus
-device		iic
-device		twsi
-device		rsb
-device		axp209			# AXP209 Power Management Unit
-device		axp81x			# AXP813/818 Power Management Unit
-device		sy8106a			# SY8106A Buck Regulator
-
-# GPIO
-device		gpio
-device		gpioled
-
-device		scbus			# SCSI bus (required for ATA/SCSI)
-device		da			# Direct Access (disks)
-device		pass			# Passthrough device (direct ATA/SCSI access)
-
-# USB support
-options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
-device		usb
-#device		uhci
-device		ohci
-device		ehci
-
-device		umass
-
-# Ethernet
-device		loop
-device		ether
-device		mii
-device		bpf
-
-#device		emac			# 10/100 integrated EMAC controller
-device		dwc			# 10/100/1000 integrated GMAC controller
-device		awg			# 10/100/1000 integrated EMAC controller
-
-# USB ethernet support, requires miibus
-device		miibus
-
-# Sound support
-device		sound
-
-# Framebuffer support
-device		vt
-device		kbdmux
-device		ums
-device		ukbd
-device		videomode
-device		hdmi
-
-# Pinmux
-device		fdt_pinctrl
-
-# Flattened Device Tree
-options 	FDT			# Configure using FDT/DTB data
-makeoptions	MODULES_EXTRA=dtb/allwinner