Various mdoc, spelling etc fixes.

MFC after:	3 days

share/man/man9/ieee80211.9

@@ -225,7 +225,7 @@ Allocate and initialize a
 structure.
 This method cannot sleep.
 The default method allocates zero'd memory using
-.Xr malloc 9.
+.Xr malloc 9 .
 Drivers should override this method to allocate extended storage
 for their own needs.
 Memory allocated by the driver must be tagged with
@@ -301,7 +301,7 @@ This method is called immediately after each channel change
 and must initiate the work to scan a channel and schedule a timer
 to advance to the next channel in the scan list.
 This callback is done in a sleepable context.
-The default method handles active scan work (e.g. sending ProbRequest
+The default method handles active scan work (e.g. sending ProbeRequest
 frames), and schedules a call to 
 .Xr ieee80211_scan_next 9
 according to the maximum dwell time for the channel.
@@ -558,4 +558,4 @@ Device supports Reduced Inter Frame Spacing (RIFS).
 .Xr ieee80211_send_action 9 ,
 .Xr ieee80211_radiotap_attach 9 ,
 .Xr ifnet 9 ,
-.Xr malloc 9 .
+.Xr malloc 9

share/man/man9/ieee80211_amrr.9

@@ -191,4 +191,4 @@ Drivers that poll a device to retrieve statistics can use
 (instead or in addition).
 .Sh SEE ALSO
 .Xr ieee80211 9 ,
-.Xr ieee80211_output 9 ,
+.Xr ieee80211_output 9

share/man/man9/ieee80211_beacon.9

@@ -112,4 +112,4 @@ Staggering beacon frames is usually superior to bursting frames, up to
 about eight vaps, at which point the overhead becomes significant and
 the channel becomes noticeably busy anyway.
 .Sh SEE ALSO
-.Xr ieee80211 9 .
+.Xr ieee80211 9

share/man/man9/ieee80211_bmiss.9

@@ -86,6 +86,6 @@ Note that software beacon miss handling is not limited to station mode;
 it can be used in any operating mode where beacons from a peer station
 are received.
 .Sh SEE ALSO
-.Xr ieee80211 9 ,
-.Xr ieee80211_vap 9 ,
 .Xr wpa_supplicant 8 ,
+.Xr ieee80211 9 ,
+.Xr ieee80211_vap 9

share/man/man9/ieee80211_crypto.9

@@ -65,10 +65,10 @@
 .\"
 .Ft int
 .Fo ieee80211_crypto_newkey
-.Fa "struct ieee80211vap *
-.Fa "int cipher
-.Fa "int flags
-.Fa "struct ieee80211_key *
+.Fa "struct ieee80211vap *"
+.Fa "int cipher"
+.Fa "int flags"
+.Fa "struct ieee80211_key *"
 .Fc
 .\"
 .Ft int
@@ -141,7 +141,7 @@ so it can reclaim resources.
 .Pp
 Crypto modules can notify the system of two events.
 When a packet replay event is recognized
-.Fn ieee80111_notify_replay_failure
+.Fn ieee80211_notify_replay_failure
 can be used to signal the event.
 When a
 .Dv TKIP
@@ -256,4 +256,4 @@ when receive traffic is active.
 .Xr ioctl 2 ,
 .Xr wlan_ccmp 4 ,
 .Xr wlan_tkip 4 ,
-.Xr wlan_wep 4 .
+.Xr wlan_wep 4

share/man/man9/ieee80211_ddb.9

@@ -54,7 +54,7 @@ This is especially important because wireless applications are often
 built for embedded environments where cross-machine or post-mortem
 debugging facilities like
 .Xr kgdb 1
-infeasible.
+are infeasible.
 .Pp
 The most commonly used command is
 .Bd -literal -offset indent
@@ -69,4 +69,4 @@ and
 data structures in the system.
 .Sh SEE ALSO
 .Xr ddb 4 ,
-.Xr ieee80211 9 .
+.Xr ieee80211 9

share/man/man9/ieee80211_input.9

@@ -113,4 +113,4 @@ Otherwise the values are made available to user applications
 (with the rssi presented as a filtered average over the last ten values 
 and the noise floor the last reported value).
 .Sh SEE ALSO
-.Xr ieee80211 9 .
+.Xr ieee80211 9

share/man/man9/ieee80211_node.9

@@ -248,4 +248,4 @@ then a normal lookup is done without a table update.
 .Sh SEE ALSO
 .Xr ddb 9
 .Xr ieee80211 9 ,
-.Xr ieee80211_proto 9 ,
+.Xr ieee80211_proto 9

share/man/man9/ieee80211_output.9

@@ -47,9 +47,9 @@
 .\"
 .Ft void
 .Fo ieee80211_process_callback
-.Fa struct ieee80211_node *
-.Fa struct mbuf *
-.Fa int
+.Fa "struct ieee80211_node *"
+.Fa "struct mbuf *"
+.Fa "int"
 .Fc
 .Sh DESCRIPTION
 The
@@ -101,7 +101,7 @@ Similarly,
 .Nm net80211
 handles activities such as background scanning and power save mode,
 frames will not be sent to a driver unless it is operating on the
-BSS channel will
+BSS channel with
 .Dq full power .
 .Pp
 All frames passed to a driver for transmit hold a reference to a

share/man/man9/ieee80211_proto.9

@@ -119,7 +119,7 @@ and
 .Vt ic_bsschan
 are guaranteed to be usable.
 .It Dv IEEE80211_S_CSA
-Channel Switch Annoucememnt (CSA) is pending.
+Channel Switch Announcement (CSA) is pending.
 This state is reached only from
 .Dv IEEE80211_S_RUN
 when either a CSA is received from an access point (in station mode)
@@ -229,11 +229,11 @@ handled by
 or, in the case of card eject or vap destroy,
 work will be initiated outside the driver.
 .Sh SEE ALSO
-.Xr ioctl 2
+.Xr ioctl 2 ,
+.Xr wpa_supplicant 8 ,
 .Xr ieee80211 9 ,
-.Xr ifnet 9
+.Xr ifnet 9 ,
 .Xr taskqueue 9
-.Xr wpa_supplicant 8
 .Sh HISTORY
 The state machine concept was part of the original
 .Nm ieee80211

share/man/man9/ieee80211_radiotap.9

@@ -198,11 +198,11 @@ RF noise power at the antenna, in decibels difference from 1mW.
 .\"power as unitless distance from maximum power set at factory calibration.
 .\"0 indicates maximum transmit power.
 .\"Monotonically nondecreasing with lower power levels.
-\.".It Dv IEEE80211_RADIOTAP_DB_TX_ATTENUATION
-\."This field contains a single unsigned 16-bit value, expressing transmit
-\."power as decibel distance from maximum power set at factory calibration.
-\."0 indicates maximum transmit power.
-\."Monotonically nondecreasing with lower power levels.
+.\".It Dv IEEE80211_RADIOTAP_DB_TX_ATTENUATION
+.\"This field contains a single unsigned 16-bit value, expressing transmit
+.\"power as decibel distance from maximum power set at factory calibration.
+.\"0 indicates maximum transmit power.
+.\"Monotonically nondecreasing with lower power levels.
 .It Dv IEEE80211_RADIOTAP_DBM_TX_POWER
 Transmit power expressed as decibels from a 1mW reference.
 This field is a single signed 8-bit value.
@@ -223,9 +223,9 @@ This field contains a single unsigned 8-bit value that indicates the
 RF noise power at the antenna, in decibels difference from an
 arbitrary, fixed reference.
 .It Dv IEEE80211_RADIOTAP_XCHANNEL
-This field containts four values: a 32-bit unsigned bitmap of
+This field contains four values: a 32-bit unsigned bitmap of
 flags that describe the channel attributes, a 16-bit unsigned
-freqeuncy in MHz (typically the channel center), an 8-bit
+frequency in MHz (typically the channel center), an 8-bit
 unsigned IEEE channel number, and a signed 8-bit value that
 holds the maximum regulatory transmit power cap in .5 dBm
 (8 bytes total).
@@ -237,10 +237,10 @@ This property supersedes
 .Dv IEEE80211_RADIOTAP_CHANNEL
 and is the only way to completely express all
 channel attributes and the
-mapping between channel freqeuncy and IEEE channel number.
+mapping between channel frequency and IEEE channel number.
 .El
 .Sh EXAMPLES
-Radiotap receive definitions for the Intersil Prims driver:
+Radiotap receive definitions for the Intersil Prism driver:
 .Bd -literal -offset indent
 #define WI_RX_RADIOTAP_PRESENT \\
         ((1 << IEEE80211_RADIOTAP_TSFT) \\
@@ -298,7 +298,6 @@ definitions first appeared in
 .\"
 .Sh AUTHORS
 .An -nosplit
-.Pp
 The original version of this manual page was written by
 .An Bruce M. Simpson Aq bms@FreeBSD.org
 and

share/man/man9/ieee80211_regdomain.9

@@ -112,7 +112,7 @@ routine.
 This should be done whenever the channel table contents are modified.
 .Pp
 The
-.Fn ieee80211_alloc_countrie
+.Fn ieee80211_alloc_countryie
 function allocates an information element as specified by 802.11h.
 Because this is expensive to generate it is cached in
 .Vt ic_countryie
@@ -140,4 +140,4 @@ The exact rules by which to operate are still being codified.
 .Sh SEE ALSO
 .Xr regdomain 5 ,
 .Xr ifconfig 8 ,
-.Xr ieee80211 9 .
+.Xr ieee80211 9

share/man/man9/ieee80211_scan.9

@@ -347,4 +347,4 @@ request.
 .Sh SEE ALSO
 .Xr ioctl 2 ,
 .Xr ieee80211 9 .
-.Xr ieee80211_proto 9 .
+.Xr ieee80211_proto 9

share/man/man9/ieee80211_vap.9

@@ -151,4 +151,4 @@ that beacon are stopped before stopping the hardware timers).
 .Sh SEE ALSO
 .Xr ieee80211 9 ,
 .Xr ifnet 9 ,
-.Xr malloc 9 .
+.Xr malloc 9