d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add experimental APM support for some laptops.

Browse Source 
If the configuration option PSM_HOOKAPM is defined and the APM device
is available, the psm driver will issue the ENABLE command to the
pointing device at the resume APM event if the device was open when
the system went into suspended mode. If the option
PSM_RESETAFTERSUSPEND is specified in addition to PSM_HOOKAPM, the
driver will try to reset the pointing device before sending the
ENABLE command.

Built-in PS/2-type pointing devices in some laptops (all the reports I
heard were about Toshiba models) sometimes don't work immediately
after the system is resumed. The device MAY become available after a
while. The system may exhibit the same symptom in other OS's too
(no, FreeBSD is not the only OS that is suffering :-).

I don't know the correct way of solving this yet, but it's been
reported that issuing the ENABLE command after resumption wakes up the
pointing device.

Without PSM_HOOKAPM, the psm driver behaves in the same way as before.

Problem reported in the bsd-nomads mailing list in Japan.
This commit is contained in:
Kazutaka YOKOTA 1997-06-30 12:52:57 +00:00
parent e7bfd17c84
commit bf3c452e20
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=27111
1 changed files with 220 additions and 69 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

287
sys/i386/isa/psm.c
View File

@ -19,7 +19,7 @@
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: psm.c,v 1.38 1997/03/23 03:34:56 bde Exp $
* $Id: psm.c,v 1.39 1997/05/27 11:55:41 yokota Exp $
*/
/*
@ -58,6 +58,7 @@
*/
#include "psm.h"
#include "apm.h"
#include "opt_psm.h"
#if NPSM > 0
@ -77,6 +78,7 @@
#include <i386/include/mouse.h>
#include <i386/include/clock.h>
#include <i386/include/apm_bios.h>
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
@ -102,6 +104,17 @@
/* #define PSM_EMULATION enables protocol emulation */
/* #define PSM_HOOKAPM hook the APM resume event */
/* #define PSM_RESETAFTERSUSPEND reset the device at the resume event */
#if NAPM <= 0
#undef PSM_HOOKAPM
#endif /* NAPM */
#ifndef PSM_HOOKAPM
#undef PSM_RESETAFTERSUSPEND
#endif /* PSM_HOOKAPM */
/* end of driver specific options */
/* some macros */
@ -149,6 +162,9 @@ static struct psm_softc { /* Driver status information */
void *devfs_token;
void *n_devfs_token;
#endif
#ifdef PSM_HOOKAPM
struct apmhook resumehook;
#endif
} *psm_softc[NPSM];
/* driver state flags (state) */
@ -159,11 +175,10 @@ static struct psm_softc { /* Driver status information */
/* function prototypes */
static int psmprobe __P((struct isa_device *));
static int psmattach __P((struct isa_device *));
static int mkms __P((unsigned char *, int *, int, mousestatus_t *));
static int mkman __P((unsigned char *, int *, int, mousestatus_t *));
static int mkmsc __P((unsigned char *, int *, int, mousestatus_t *));
static int mkmm __P((unsigned char *, int *, int, mousestatus_t *));
static int mkps2 __P((unsigned char *, int *, int, mousestatus_t *));
static void psm_drvinit __P((void *));
#ifdef PSM_HOOKAPM
static int psmresume __P((void *));
#endif
static d_open_t psmopen;
static d_close_t psmclose;
@ -171,6 +186,26 @@ static d_read_t psmread;
static d_ioctl_t psmioctl;
static d_select_t psmselect;
static int enable_aux_dev __P((KBDC));
static int disable_aux_dev __P((KBDC));
static int get_mouse_status __P((KBDC, int *));
static int get_aux_id __P((KBDC));
static int set_mouse_sampling_rate __P((KBDC, int));
static int set_mouse_scaling __P((KBDC));
static int set_mouse_resolution __P((KBDC, int));
static int set_mouse_mode __P((KBDC));
static int get_mouse_buttons __P((KBDC));
static int is_a_mouse __P((int));
static void recover_from_error __P((KBDC));
static int restore_controller __P((KBDC, int));
static int reinitialize __P((int, mousemode_t *));
static int doopen __P((int, int));
static int mkms __P((unsigned char *, int *, int, mousestatus_t *));
static int mkman __P((unsigned char *, int *, int, mousestatus_t *));
static int mkmsc __P((unsigned char *, int *, int, mousestatus_t *));
static int mkmm __P((unsigned char *, int *, int, mousestatus_t *));
static int mkps2 __P((unsigned char *, int *, int, mousestatus_t *));
/* device driver declarateion */
struct isa_driver psmdriver = { psmprobe, psmattach, "psm", FALSE };
#define CDEV_MAJOR 21
@ -403,9 +438,9 @@ restore_controller(KBDC kbdc, int command_byte)
* calling this routine.
*/
static int
reinitialize(dev_t dev, mousemode_t *mode)
reinitialize(int unit, mousemode_t *mode)
{
KBDC kbdc = psm_softc[PSM_UNIT(dev)]->kbdc;
KBDC kbdc = psm_softc[unit]->kbdc;
int stat[3];
int i;
@ -413,7 +448,7 @@ reinitialize(dev_t dev, mousemode_t *mode)
case 1: /* ignore this error */
if (verbose)
log(LOG_DEBUG, "psm%d: strange result for test aux port (%d).\n",
PSM_UNIT(dev), i);
unit, i);
/* fall though */
case 0: /* no error */
break;
@ -421,7 +456,7 @@ reinitialize(dev_t dev, mousemode_t *mode)
default: /* error */
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
PSM_UNIT(dev),i);
unit,i);
return FALSE;
}
@ -431,8 +466,7 @@ reinitialize(dev_t dev, mousemode_t *mode)
*/
if (!reset_aux_dev(kbdc)) {
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
PSM_UNIT(dev));
log(LOG_ERR, "psm%d: failed to reset the aux device.\n", unit);
return FALSE;
}
@ -441,8 +475,7 @@ reinitialize(dev_t dev, mousemode_t *mode)
* if the device can be enabled.
*/
if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
PSM_UNIT(dev));
log(LOG_ERR, "psm%d: failed to enable the aux device.\n", unit);
return FALSE;
}
empty_both_buffers(kbdc, 10); /* remove stray data if any */
@ -460,15 +493,69 @@ reinitialize(dev_t dev, mousemode_t *mode)
/* just check the status of the mouse */
i = get_mouse_status(kbdc, stat);
if (!i) {
log(LOG_DEBUG, "psm%d: failed to get status.\n", PSM_UNIT(dev));
log(LOG_DEBUG, "psm%d: failed to get status.\n", unit);
} else if (verbose) {
log(LOG_DEBUG, "psm%d: status %02x %02x %02x\n",
PSM_UNIT(dev), stat[0], stat[1], stat[2]);
log(LOG_DEBUG, "psm%d: status %02x %02x %02x\n", unit,
stat[0], stat[1], stat[2]);
}
return TRUE;
}
static int
doopen(int unit, int command_byte)
{
struct psm_softc *sc = psm_softc[unit];
int stat[3];
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
#if 0
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!reinitialize(unit, &sc->mode)) {
if (!enable_aux_dev(sc->kbdc))
recover_from_error(sc->kbdc);
#else
{
#endif
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
log(LOG_ERR, "psm%d: failed to enable the device (doopen).\n",
unit);
return (EIO);
}
}
if (!get_mouse_status(sc->kbdc, stat))
log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n", unit);
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS)
| KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
log(LOG_ERR, "psm%d: failed to enable the aux interrupt (doopen).\n",
unit);
return (EIO);
}
return (0);
}
/* psm driver entry points */
#define endprobe(v) { if (bootverbose) \
@ -744,7 +831,17 @@ psmattach(struct isa_device *dvp)
sc->n_devfs_token =
devfs_add_devswf(&psm_cdevsw, PSM_MKMINOR(unit, FALSE),
DV_CHR, 0, 0, 0666, "npsm%d", unit);
#endif
#endif /* DEVFS */
#ifdef PSM_HOOKAPM
sc->resumehook.ah_name = "PS/2 mouse";
sc->resumehook.ah_fun = psmresume;
sc->resumehook.ah_arg = (void *)unit;
sc->resumehook.ah_order = APM_MID_ORDER;
apm_hook_establish(APM_HOOK_RESUME , &sc->resumehook);
if (verbose)
printf("psm%d: APM hooks installed.\n", unit);
#endif /* PSM_HOOKAPM */
if (verbose)
printf("psm%d: device ID %d, %d buttons\n",
@ -763,9 +860,8 @@ psmopen(dev_t dev, int flag, int fmt, struct proc *p)
{
int unit = PSM_UNIT(dev);
struct psm_softc *sc;
int stat[3];
int command_byte;
int ret;
int err;
int s;
/* Validate unit number */
@ -828,57 +924,13 @@ psmopen(dev_t dev, int flag, int fmt, struct proc *p)
splx(s);
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
#if 0
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!reinitialize(dev, &sc->mode) || !enable_aux_dev(sc->kbdc))
recover_from_error(sc->kbdc);
#endif
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR, "psm%d: failed to enable the device (psmopen).\n",
unit);
return (EIO);
}
ret = get_mouse_status(sc->kbdc, stat);
if (!ret) {
log(LOG_DEBUG, "psm%d: failed to get status (psmopen).\n", unit);
} else if (verbose >= 2) {
log(LOG_DEBUG, "psm%d: status %02x %02x %02x (psmopen)\n",
unit, stat[0], stat[1], stat[2]);
}
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS)
| KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR, "psm%d: failed to enable the aux interrupt (psmopen).\n",
unit);
return (EIO);
}
err = doopen(unit, command_byte);
/* done */
if (err == 0)
sc->state |= PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
return (0);
return (err);
}
static int
@ -958,7 +1010,7 @@ psmclose(dev_t dev, int flag, int fmt, struct proc *p)
empty_aux_buffer(sc->kbdc, 10);
/* close is almost always successful */
sc->state &= ~PSM_OPEN;
sc->state &= ~(PSM_OPEN | PSM_ASLP);
kbdc_lock(sc->kbdc, FALSE);
return (0);
}
@ -1576,6 +1628,105 @@ psm_drvinit(void *unused)
}
}
#ifdef PSM_HOOKAPM
static int
psmresume(void *dummy)
{
struct psm_softc *sc = psm_softc[(int)dummy];
int unit = (int)dummy;
int err = 0;
int s;
int c;
if (verbose >= 2)
log(LOG_NOTICE, "psm%d: APM resume hook called.\n", unit);
/* don't let anybody mess with the aux device */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
/* save the current controller command byte */
empty_both_buffers(sc->kbdc, 10);
c = get_controller_command_byte(sc->kbdc);
if (verbose >= 2)
log(LOG_DEBUG, "psm%d: current command byte: %04x (psmresume).\n",
unit, c);
/* enable the aux port but disable the aux interrupt and the keyboard */
if ((c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
| KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR, "psm%d: unable to set the command byte (psmresume).\n",
unit);
return (EIO);
}
/* flush any data */
if (sc->state & PSM_VALID) {
disable_aux_dev(sc->kbdc); /* this may fail; but never mind... */
empty_aux_buffer(sc->kbdc, 10);
}
sc->inputbytes = 0;
#ifdef PSM_RESETAFTERSUSPEND
/* try to detect the aux device; are you still there? */
if (reinitialize(unit, &sc->mode)) {
/* yes */
sc->state |= PSM_VALID;
} else {
/* the device has gone! */
restore_controller(sc->kbdc, c);
sc->state &= ~PSM_VALID;
log(LOG_ERR, "psm%d: the aux device has gone! (psmresume).\n",
unit);
err = ENXIO;
}
#endif /* PSM_RESETAFTERSUSPEND */
splx(s);
/* restore the driver state */
if ((sc->state & PSM_OPEN) && (err == 0)) {
/* enable the aux device and the port again */
err = doopen(unit, c);
if (err != 0)
log(LOG_ERR, "psm%d: failed to enable the device (psmresume).\n",
unit);
} else {
/* restore the keyboard port and disable the aux port */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(c & KBD_KBD_CONTROL_BITS)
| KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
log(LOG_ERR, "psm%d: failed to disable the aux port (psmresume).\n",
unit);
err = EIO;
}
}
/* done */
kbdc_lock(sc->kbdc, FALSE);
if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
/*
* Release the blocked process; it must be notified that the device
* cannot be accessed anymore.
*/
sc->state &= ~PSM_ASLP;
wakeup((caddr_t)sc);
}
if (verbose >= 2)
log(LOG_DEBUG, "psm%d: APM resume hook exiting.\n", unit);
return (err);
}
#endif /* PSM_HOOKAPM */
SYSINIT(psmdev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE + CDEV_MAJOR, psm_drvinit, NULL)
#endif /* NPSM > 0 */