Add rc.d/ubthidhci. This small script calls usbconfig(1) to change a USB

Bluetooth controller from HID mode to HCI mode.

MFC after:	1 week

etc/defaults/rc.conf

@@ -436,6 +436,11 @@ rfcomm_pppd_server_two_channel="3"	# Override local channel for 'two'
 #rfcomm_pppd_server_two_register_sp="NO"	# Override SP and DUN register
 #rfcomm_pppd_server_two_register_dun="NO"	# for 'two'
 
+#ubthidhci_enable="YES"		# Switch an USB BT controller present on
+#ubthidhci_busnum="3"		# bus 3 and addr 2 from HID mode to HCI mode.
+#ubthidhci_addr="2"		# Check usbconfig list to find the correct
+				# numbers for your system.
+
 ### Miscellaneous network options: ###
 icmp_bmcastecho="NO"	# respond to broadcast ping packets
 

etc/rc.d/ubthidhci

@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: ubthidhci
+# REQUIRE: DAEMON 
+# BEFORE: bluetooth 
+# KEYWORD: nojail shutdown
+
+. /etc/rc.subr
+
+name="ubthidhci"
+command="/usr/sbin/usbconfig"
+rcvar=`set_rcvar`
+start_precmd="ubthidhci_prestart"
+
+ubthidhci_prestart()
+{
+
+	if [ -z ${ubthidhci_busnum} ]; then
+		warn ubthidhci_busnum is not set
+		return 1
+	fi
+	if [ -z ${ubthidhci_addr} ]; then
+		warn ubthidhci_addr is not set
+		return 1
+	fi
+}
+
+load_rc_config $name
+#
+# We discard the output because:
+# 1) we don't want it to show up during boot; and
+# 2) the request usually returns an error, but that doesn't mean it failed
+#
+# NB: 0x40 is UT_VENDOR
+command_args="-u ${ubthidhci_busnum} -a ${ubthidhci_addr} do_request 0x40 0 0 0 0 > /dev/null 2>&1"
+
+run_rc_command "$1"

share/man/man5/rc.conf.5

@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd April 8, 2010
+.Dd April 09, 2010
 .Dt RC.CONF 5
 .Os
 .Sh NAME
@@ -4268,6 +4268,26 @@ if it should register Dial-Up Networking service on the speficied
 RFCOMM channel.
 Default
 .Dq Li NO .
+.It Va ubthidhci_enable
+.Pq Vt bool
+If set to
+.Dq Li YES ,
+change the USB Bluetooth controller from HID mode to HCI mode.
+You also need to specify the location of USB Bluetooth controller with the
+.Va ubthidhci_busnum
+and
+.Va ubthidhci_addr
+variables.
+.It Va ubthidhci_busnum
+Bus number where the USB Bluetooth controller is located.
+Check the output of
+.Xr usbconfig 1
+on your system to find this information.
+.It Va ubthidhci_addr
+Bus address of the USB Bluetooth controller.
+Check the output of
+.Xr usbconfig 1
+on your system to find this information.
 .El
 .Sh FILES
 .Bl -tag -width ".Pa /etc/defaults/rc.conf" -compact
@@ -4283,6 +4303,7 @@ Default
 .Xr kbdcontrol 1 ,
 .Xr makewhatis 1 ,
 .Xr sh 1 ,
+.Xr usbconfig 1 ,
 .Xr vi 1 ,
 .Xr vidcontrol 1 ,
 .Xr bridge 4 ,