* Add ivars for ISA pnp.
* Move isa_dma* declarations to isavar.h. * Add a method ISA_DELETE_RESOURCE() to the ISA interface. * Tidy up include protection defines.
This commit is contained in:
parent
bcbb365b6b
commit
cfa84f4631
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=47613
@ -23,7 +23,7 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id: isa_common.c,v 1.1 1999/05/22 15:18:23 dfr Exp $
|
||||
* $Id: isa_common.c,v 1.2 1999/05/28 09:24:58 dfr Exp $
|
||||
*/
|
||||
/*
|
||||
* Modifications for Intel architecture by Garrett A. Wollman.
|
||||
@ -279,8 +279,28 @@ isa_read_ivar(device_t bus, device_t dev, int index, uintptr_t * result)
|
||||
case ISA_IVAR_FLAGS:
|
||||
*result = idev->id_flags;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_VENDORID:
|
||||
*result = idev->id_vendorid;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_SERIAL:
|
||||
*result = idev->id_serial;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_LOGICALID:
|
||||
*result = idev->id_logicalid;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_COMPATID:
|
||||
*result = idev->id_compatid;
|
||||
break;
|
||||
|
||||
default:
|
||||
return ENOENT;
|
||||
}
|
||||
return ENOENT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
@ -307,9 +327,27 @@ isa_write_ivar(device_t bus, device_t dev,
|
||||
case ISA_IVAR_FLAGS:
|
||||
idev->id_flags = value;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_VENDORID:
|
||||
idev->id_vendorid = value;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_SERIAL:
|
||||
idev->id_serial = value;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_LOGICALID:
|
||||
idev->id_logicalid = value;
|
||||
break;
|
||||
|
||||
case ISA_IVAR_COMPATID:
|
||||
idev->id_compatid = value;
|
||||
break;
|
||||
|
||||
default:
|
||||
return (ENOENT);
|
||||
}
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
@ -349,6 +387,14 @@ isa_get_resource(device_t dev, device_t child, int type, int rid,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
isa_delete_resource(device_t dev, device_t child, int type, int rid)
|
||||
{
|
||||
struct isa_device* idev = DEVTOISA(child);
|
||||
struct resource_list *rl = &idev->id_resources;
|
||||
resource_list_delete(rl, type, rid);
|
||||
}
|
||||
|
||||
static device_method_t isa_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, isa_probe),
|
||||
@ -373,6 +419,7 @@ static device_method_t isa_methods[] = {
|
||||
/* ISA interface */
|
||||
DEVMETHOD(isa_set_resource, isa_set_resource),
|
||||
DEVMETHOD(isa_get_resource, isa_get_resource),
|
||||
DEVMETHOD(isa_delete_resource, isa_delete_resource),
|
||||
|
||||
{ 0, 0 }
|
||||
};
|
||||
|
@ -23,7 +23,7 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id$
|
||||
* $Id: isa_common.h,v 1.1 1999/05/22 15:18:25 dfr Exp $
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -41,6 +41,10 @@ MALLOC_DECLARE(M_ISADEV);
|
||||
struct isa_device {
|
||||
struct resource_list id_resources;
|
||||
int id_flags;
|
||||
u_int32_t id_vendorid; /* pnp vendor id */
|
||||
u_int32_t id_serial; /* pnp serial */
|
||||
u_int32_t id_logicalid; /* pnp logical device id */
|
||||
u_int32_t id_compatid; /* pnp compat device id */
|
||||
};
|
||||
|
||||
#define DEVTOISA(dev) ((struct isa_device *) device_get_ivars(dev))
|
||||
|
@ -23,7 +23,7 @@
|
||||
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
# SUCH DAMAGE.
|
||||
#
|
||||
# $Id: pci_if.m,v 1.1 1999/04/16 21:22:52 peter Exp $
|
||||
# $Id: isa_if.m,v 1.1 1999/05/22 15:18:26 dfr Exp $
|
||||
#
|
||||
|
||||
INTERFACE isa;
|
||||
@ -53,3 +53,13 @@ METHOD int get_resource {
|
||||
u_long *startp;
|
||||
u_long *countp;
|
||||
};
|
||||
|
||||
#
|
||||
# Delete a resource.
|
||||
#
|
||||
METHOD void delete_resource {
|
||||
device_t dev;
|
||||
device_t child;
|
||||
int type;
|
||||
int rid;
|
||||
};
|
||||
|
@ -34,15 +34,15 @@
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* from: @(#)isa.h 5.7 (Berkeley) 5/9/91
|
||||
* $Id: isareg.h,v 1.1 1998/08/06 08:49:09 dfr Exp $
|
||||
* $Id: isareg.h,v 1.2 1999/01/06 05:49:30 yokota Exp $
|
||||
*/
|
||||
|
||||
#ifdef PC98
|
||||
#error isa.h is included from PC-9801 source
|
||||
#endif
|
||||
|
||||
#ifndef _I386_ISA_ISA_H_
|
||||
#define _I386_ISA_ISA_H_
|
||||
#ifndef _ISA_ISA_H_
|
||||
#define _ISA_ISA_H_
|
||||
|
||||
/* BEWARE: Included in both assembler and C code */
|
||||
|
||||
@ -197,4 +197,4 @@
|
||||
#define CYRIX_EMC 0xC0000000 /* Cyrix EMC */
|
||||
#endif /* !COMPAQ_RAMRELOC */
|
||||
|
||||
#endif /* !_I386_ISA_ISA_H_ */
|
||||
#endif /* !_ISA_ISA_H_ */
|
||||
|
@ -23,10 +23,16 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id: isavar.h,v 1.7 1999/05/22 15:18:28 dfr Exp $
|
||||
* $Id: isavar.h,v 1.8 1999/05/28 09:25:02 dfr Exp $
|
||||
*/
|
||||
|
||||
#ifndef _ISA_ISAVAR_H_
|
||||
#define _ISA_ISAVAR_H_
|
||||
|
||||
#include "isa_if.h"
|
||||
#include <isa/pnp.h>
|
||||
|
||||
#ifdef KERNEL
|
||||
|
||||
/*
|
||||
* ISA devices are partially ordered to ensure that devices which are
|
||||
@ -39,8 +45,8 @@
|
||||
#define ISA_ORDER_SPECULATIVE 1 /* legacy non-sensitive hardware */
|
||||
#define ISA_ORDER_PNP 2 /* plug-and-play hardware */
|
||||
|
||||
#define ISA_NPORT_IVARS 2
|
||||
#define ISA_NMEM_IVARS 2
|
||||
#define ISA_NPORT_IVARS 8
|
||||
#define ISA_NMEM_IVARS 4
|
||||
#define ISA_NIRQ_IVARS 2
|
||||
#define ISA_NDRQ_IVARS 2
|
||||
|
||||
@ -63,7 +69,11 @@ enum isa_device_ivars {
|
||||
ISA_IVAR_IRQ_1,
|
||||
ISA_IVAR_DRQ,
|
||||
ISA_IVAR_DRQ_0 = ISA_IVAR_DRQ,
|
||||
ISA_IVAR_DRQ_1
|
||||
ISA_IVAR_DRQ_1,
|
||||
ISA_IVAR_VENDORID,
|
||||
ISA_IVAR_SERIAL,
|
||||
ISA_IVAR_LOGICALID,
|
||||
ISA_IVAR_COMPATID
|
||||
};
|
||||
|
||||
extern intrmask_t isa_irq_pending(void);
|
||||
@ -97,3 +107,20 @@ ISA_ACCESSOR(drq, DRQ, int)
|
||||
ISA_ACCESSOR(maddr, MADDR, int)
|
||||
ISA_ACCESSOR(msize, MSIZE, int)
|
||||
ISA_ACCESSOR(flags, FLAGS, int)
|
||||
ISA_ACCESSOR(vendorid, VENDORID, int)
|
||||
ISA_ACCESSOR(serial, SERIAL, int)
|
||||
ISA_ACCESSOR(logicalid, LOGICALID, int)
|
||||
ISA_ACCESSOR(compatid, COMPATID, int)
|
||||
|
||||
void isa_dmacascade __P((int chan));
|
||||
void isa_dmadone __P((int flags, caddr_t addr, int nbytes, int chan));
|
||||
void isa_dmainit __P((int chan, u_int bouncebufsize));
|
||||
void isa_dmastart __P((int flags, caddr_t addr, u_int nbytes, int chan));
|
||||
int isa_dma_acquire __P((int chan));
|
||||
void isa_dma_release __P((int chan));
|
||||
int isa_dmastatus __P((int chan));
|
||||
int isa_dmastop __P((int chan));
|
||||
|
||||
#endif /* KERNEL */
|
||||
|
||||
#endif /* !_ISA_ISAVAR_H_ */
|
||||
|
308
sys/isa/pnp.h
Normal file
308
sys/isa/pnp.h
Normal file
@ -0,0 +1,308 @@
|
||||
/*
|
||||
* Copyright (c) 1996, Sujal M. Patel
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. All advertising materials mentioning features or use of this software
|
||||
* must display the following acknowledgement:
|
||||
* This product includes software developed by Sujal M. Patel
|
||||
* 4. Neither the name of the author nor the names of any co-contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id$
|
||||
* from: pnp.h,v 1.7 1998/09/13 22:15:44 eivind Exp
|
||||
*/
|
||||
|
||||
#ifndef _ISA_PNP_H_
|
||||
#define _ISA_PNP_H_
|
||||
|
||||
/* Maximum Number of PnP Devices. 8 should be plenty */
|
||||
#define MAX_PNP_CARDS 8
|
||||
/*
|
||||
* the following is the maximum number of PnP Logical devices that
|
||||
* userconfig can handle.
|
||||
*/
|
||||
#define MAX_PNP_LDN 20
|
||||
|
||||
/* Static ports to access PnP state machine */
|
||||
#if defined(PC98) && defined(KERNEL)
|
||||
/* pnp.h is included from pnpinfo.c. */
|
||||
#define _PNP_ADDRESS 0x259
|
||||
#define _PNP_WRITE_DATA 0xa59
|
||||
#else
|
||||
#define _PNP_ADDRESS 0x279
|
||||
#define _PNP_WRITE_DATA 0xa79
|
||||
#endif
|
||||
|
||||
/* PnP Registers. Write to ADDRESS and then use WRITE/READ_DATA */
|
||||
#define SET_RD_DATA 0x00
|
||||
/***
|
||||
Writing to this location modifies the address of the port used for
|
||||
reading from the Plug and Play ISA cards. Bits[7:0] become I/O
|
||||
read port address bits[9:2]. Reads from this register are ignored.
|
||||
***/
|
||||
|
||||
#define SERIAL_ISOLATION 0x01
|
||||
/***
|
||||
A read to this register causes a Plug and Play cards in the Isolation
|
||||
state to compare one bit of the boards ID.
|
||||
This register is read only.
|
||||
***/
|
||||
|
||||
#define CONFIG_CONTROL 0x02
|
||||
/***
|
||||
Bit[2] Reset CSN to 0
|
||||
Bit[1] Return to the Wait for Key state
|
||||
Bit[0] Reset all logical devices and restore configuration
|
||||
registers to their power-up values.
|
||||
|
||||
A write to bit[0] of this register performs a reset function on
|
||||
all logical devices. This resets the contents of configuration
|
||||
registers to their default state. All card's logical devices
|
||||
enter their default state and the CSN is preserved.
|
||||
|
||||
A write to bit[1] of this register causes all cards to enter the
|
||||
Wait for Key state but all CSNs are preserved and logical devices
|
||||
are not affected.
|
||||
|
||||
A write to bit[2] of this register causes all cards to reset their
|
||||
CSN to zero .
|
||||
|
||||
This register is write-only. The values are not sticky, that is,
|
||||
hardware will automatically clear them and there is no need for
|
||||
software to clear the bits.
|
||||
***/
|
||||
|
||||
#define WAKE 0x03
|
||||
/***
|
||||
A write to this port will cause all cards that have a CSN that
|
||||
matches the write data[7:0] to go from the Sleep state to the either
|
||||
the Isolation state if the write data for this command is zero or
|
||||
the Config state if the write data is not zero. Additionally, the
|
||||
pointer to the byte-serial device is reset. This register is
|
||||
writeonly.
|
||||
***/
|
||||
|
||||
#define RESOURCE_DATA 0x04
|
||||
/***
|
||||
A read from this address reads the next byte of resource information.
|
||||
The Status register must be polled until bit[0] is set before this
|
||||
register may be read. This register is read only.
|
||||
***/
|
||||
|
||||
#define STATUS 0x05
|
||||
/***
|
||||
Bit[0] when set indicates it is okay to read the next data byte
|
||||
from the Resource Data register. This register is readonly.
|
||||
***/
|
||||
|
||||
#define SET_CSN 0x06
|
||||
/***
|
||||
A write to this port sets a card's CSN. The CSN is a value uniquely
|
||||
assigned to each ISA card after the serial identification process
|
||||
so that each card may be individually selected during a Wake[CSN]
|
||||
command. This register is read/write.
|
||||
***/
|
||||
|
||||
#define SET_LDN 0x07
|
||||
/***
|
||||
Selects the current logical device. All reads and writes of memory,
|
||||
I/O, interrupt and DMA configuration information access the registers
|
||||
of the logical device written here. In addition, the I/O Range
|
||||
Check and Activate commands operate only on the selected logical
|
||||
device. This register is read/write. If a card has only 1 logical
|
||||
device, this location should be a read-only value of 0x00.
|
||||
***/
|
||||
|
||||
/*** addresses 0x08 - 0x1F Card Level Reserved for future use ***/
|
||||
/*** addresses 0x20 - 0x2F Card Level, Vendor Defined ***/
|
||||
|
||||
#define ACTIVATE 0x30
|
||||
/***
|
||||
For each logical device there is one activate register that controls
|
||||
whether or not the logical device is active on the ISA bus. Bit[0],
|
||||
if set, activates the logical device. Bits[7:1] are reserved and
|
||||
must return 0 on reads. This is a read/write register. Before a
|
||||
logical device is activated, I/O range check must be disabled.
|
||||
***/
|
||||
|
||||
#define IO_RANGE_CHECK 0x31
|
||||
/***
|
||||
This register is used to perform a conflict check on the I/O port
|
||||
range programmed for use by a logical device.
|
||||
|
||||
Bit[7:2] Reserved and must return 0 on reads
|
||||
Bit[1] Enable I/O Range check, if set then I/O Range Check
|
||||
is enabled. I/O range check is only valid when the logical
|
||||
device is inactive.
|
||||
|
||||
Bit[0], if set, forces the logical device to respond to I/O reads
|
||||
of the logical device's assigned I/O range with a 0x55 when I/O
|
||||
range check is in operation. If clear, the logical device drives
|
||||
0xAA. This register is read/write.
|
||||
***/
|
||||
|
||||
/*** addr 0x32 - 0x37 Logical Device Control Reserved for future use ***/
|
||||
/*** addr 0x38 - 0x3F Logical Device Control Vendor Define ***/
|
||||
|
||||
#define MEM_CONFIG 0x40
|
||||
/***
|
||||
Four memory resource registers per range, four ranges.
|
||||
Fill with 0 if no ranges are enabled.
|
||||
|
||||
Offset 0: RW Memory base address bits[23:16]
|
||||
Offset 1: RW Memory base address bits[15:8]
|
||||
Offset 2: Memory control
|
||||
Bit[1] specifies 8/16-bit control. This bit is set to indicate
|
||||
16-bit memory, and cleared to indicate 8-bit memory.
|
||||
Bit[0], if cleared, indicates the next field can be used as a range
|
||||
length for decode (implies range length and base alignment of memory
|
||||
descriptor are equal).
|
||||
Bit[0], if set, indicates the next field is the upper limit for
|
||||
the address. - - Bit[0] is read-only.
|
||||
Offset 3: RW upper limit or range len, bits[23:16]
|
||||
Offset 4: RW upper limit or range len, bits[15:8]
|
||||
Offset 5-Offset 7: filler, unused.
|
||||
***/
|
||||
|
||||
#define IO_CONFIG_BASE 0x60
|
||||
/***
|
||||
Eight ranges, two bytes per range.
|
||||
Offset 0: I/O port base address bits[15:8]
|
||||
Offset 1: I/O port base address bits[7:0]
|
||||
***/
|
||||
|
||||
#define IRQ_CONFIG 0x70
|
||||
/***
|
||||
Two entries, two bytes per entry.
|
||||
Offset 0: RW interrupt level (1..15, 0=unused).
|
||||
Offset 1: Bit[1]: level(1:hi, 0:low),
|
||||
Bit[0]: type (1:level, 0:edge)
|
||||
byte 1 can be readonly if 1 type of int is used.
|
||||
***/
|
||||
|
||||
#define DRQ_CONFIG 0x74
|
||||
/***
|
||||
Two entries, one byte per entry. Bits[2:0] select
|
||||
which DMA channel is in use for DMA 0. Zero selects DMA channel
|
||||
0, seven selects DMA channel 7. DMA channel 4, the cascade channel
|
||||
is used to indicate no DMA channel is active.
|
||||
***/
|
||||
|
||||
/*** 32-bit memory accesses are at 0x76 ***/
|
||||
|
||||
/* Macros to parse Resource IDs */
|
||||
#define PNP_RES_TYPE(a) (a >> 7)
|
||||
#define PNP_SRES_NUM(a) (a >> 3)
|
||||
#define PNP_SRES_LEN(a) (a & 0x07)
|
||||
#define PNP_LRES_NUM(a) (a & 0x7f)
|
||||
|
||||
/* Small Resource Item names */
|
||||
#define PNP_VERSION 0x1
|
||||
#define LOG_DEVICE_ID 0x2
|
||||
#define COMP_DEVICE_ID 0x3
|
||||
#define IRQ_FORMAT 0x4
|
||||
#define DMA_FORMAT 0x5
|
||||
#define START_DEPEND_FUNC 0x6
|
||||
#define END_DEPEND_FUNC 0x7
|
||||
#define IO_PORT_DESC 0x8
|
||||
#define FIXED_IO_PORT_DESC 0x9
|
||||
#define SM_RES_RESERVED 0xa-0xd
|
||||
#define SM_VENDOR_DEFINED 0xe
|
||||
#define END_TAG 0xf
|
||||
|
||||
/* Large Resource Item names */
|
||||
#define MEMORY_RANGE_DESC 0x1
|
||||
#define ID_STRING_ANSI 0x2
|
||||
#define ID_STRING_UNICODE 0x3
|
||||
#define LG_VENDOR_DEFINED 0x4
|
||||
#define _32BIT_MEM_RANGE_DESC 0x5
|
||||
#define _32BIT_FIXED_LOC_DESC 0x6
|
||||
#define LG_RES_RESERVED 0x7-0x7f
|
||||
|
||||
/*
|
||||
* pnp_cinfo contains Configuration Information. They are used
|
||||
* to communicate to the device driver the actual configuration
|
||||
* of the device, and also by the userconfig menu to let the
|
||||
* operating system override any configuration set by the bios.
|
||||
*
|
||||
*/
|
||||
struct pnp_cinfo {
|
||||
u_int vendor_id; /* board id */
|
||||
u_int serial; /* Board's Serial Number */
|
||||
u_long flags; /* OS-reserved flags */
|
||||
u_char csn; /* assigned Card Select Number */
|
||||
u_char ldn; /* Logical Device Number */
|
||||
u_char enable; /* pnp enable */
|
||||
u_char override; /* override bios parms (in userconfig) */
|
||||
u_char irq[2]; /* IRQ Number */
|
||||
u_char irq_type[2]; /* IRQ Type */
|
||||
u_char drq[2];
|
||||
u_short port[8]; /* The Base Address of the Port */
|
||||
struct {
|
||||
u_int32_t base; /* Memory Base Address */
|
||||
int control; /* Memory Control Register */
|
||||
u_int32_t range; /* Memory Range *OR* Upper Limit */
|
||||
} mem[4];
|
||||
};
|
||||
|
||||
#ifdef KERNEL
|
||||
|
||||
/*
|
||||
* Used by userconfig
|
||||
*/
|
||||
extern struct pnp_cinfo pnp_ldn_overrides[MAX_PNP_LDN];
|
||||
|
||||
/*
|
||||
* The following definitions are for use in drivers
|
||||
*/
|
||||
extern struct linker_set pnpdevice_set;
|
||||
|
||||
typedef struct _pnpid_t {
|
||||
u_int32_t vend_id; /* Not anly a Vendor ID, also a Compatible Device ID */
|
||||
char *id_str;
|
||||
} pnpid_t;
|
||||
|
||||
void pnp_write(int d, u_char r); /* used by Luigi's sound driver */
|
||||
u_char pnp_read(int d); /* currently unused, but who knows... */
|
||||
int enable_pnp_card(void);
|
||||
|
||||
#define PNP_HEXTONUM(c) ((c) >= 'a' \
|
||||
? (c) - 'a' + 10 \
|
||||
: ((c) >= 'A' \
|
||||
? (c) - 'A' + 10 \
|
||||
: (c) - '0'))
|
||||
|
||||
#define PNP_EISAID(s) \
|
||||
((((s[0] - '@') & 0x1f) << 2) \
|
||||
| (((s[1] - '@') & 0x18) >> 3) \
|
||||
| (((s[1] - '@') & 0x07) << 13) \
|
||||
| (((s[2] - '@') & 0x1f) << 8) \
|
||||
| (PNP_HEXTONUM(s[4]) << 16) \
|
||||
| (PNP_HEXTONUM(s[3]) << 20) \
|
||||
| (PNP_HEXTONUM(s[6]) << 24) \
|
||||
| (PNP_HEXTONUM(s[5]) << 28))
|
||||
|
||||
#endif /* KERNEL */
|
||||
|
||||
#endif /* !_ISA_PNP_H_ */
|
Loading…
Reference in New Issue
Block a user