From d1f7c4baa1525979780852df73935e311c5b6968 Mon Sep 17 00:00:00 2001 From: Andrew Thompson Date: Wed, 12 May 2010 22:55:45 +0000 Subject: [PATCH] Back out r203140 which was causing problems when the first and the last microframe slot was not in the smask. The problem was that the EHCI driver was then thinking that the transfer was immediately complete in some cases. Which could lead to freeze-like situations, which can be recovered by unplugging the USB device. Reported by: Richard Kolkovich Submitted by: Hans Petter Selasky --- sys/dev/usb/controller/ehci.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/sys/dev/usb/controller/ehci.c b/sys/dev/usb/controller/ehci.c index 12cfe53680cd..6f22c0a8e038 100644 --- a/sys/dev/usb/controller/ehci.c +++ b/sys/dev/usb/controller/ehci.c @@ -1352,22 +1352,32 @@ ehci_check_transfer(struct usb_xfer *xfer) } } else if (methods == &ehci_device_isoc_hs_methods) { ehci_itd_t *td; - uint8_t n = (xfer->nframes & 7); /* isochronous high speed transfer */ /* check last transfer */ td = xfer->td_transfer_last; usb_pc_cpu_invalidate(td->page_cache); - if (n == 0) - status = td->itd_status[7]; - else - status = td->itd_status[n-1]; + status = td->itd_status[0]; + status |= td->itd_status[1]; + status |= td->itd_status[2]; + status |= td->itd_status[3]; + status |= td->itd_status[4]; + status |= td->itd_status[5]; + status |= td->itd_status[6]; + status |= td->itd_status[7]; /* also check first transfer */ td = xfer->td_transfer_first; usb_pc_cpu_invalidate(td->page_cache); status |= td->itd_status[0]; + status |= td->itd_status[1]; + status |= td->itd_status[2]; + status |= td->itd_status[3]; + status |= td->itd_status[4]; + status |= td->itd_status[5]; + status |= td->itd_status[6]; + status |= td->itd_status[7]; /* if no transactions are active we continue */ if (!(status & htohc32(sc, EHCI_ITD_ACTIVE))) { @@ -2799,14 +2809,15 @@ ehci_device_isoc_hs_enter(struct usb_xfer *xfer) uint8_t x; uint8_t td_no; uint8_t page_no; + uint8_t shift = usbd_xfer_get_fps_shift(xfer); #ifdef USB_DEBUG uint8_t once = 1; #endif - DPRINTFN(6, "xfer=%p next=%d nframes=%d\n", - xfer, xfer->endpoint->isoc_next, xfer->nframes); + DPRINTFN(6, "xfer=%p next=%d nframes=%d shift=%d\n", + xfer, xfer->endpoint->isoc_next, xfer->nframes, (int)shift); /* get the current frame index */ @@ -2820,7 +2831,7 @@ ehci_device_isoc_hs_enter(struct usb_xfer *xfer) (EHCI_VIRTUAL_FRAMELIST_COUNT - 1); if ((xfer->endpoint->is_synced == 0) || - (buf_offset < ((xfer->nframes + 7) / 8))) { + (buf_offset < (((xfer->nframes << shift) + 7) / 8))) { /* * If there is data underflow or the pipe queue is empty we * schedule the transfer a few frames ahead of the current @@ -2844,7 +2855,7 @@ ehci_device_isoc_hs_enter(struct usb_xfer *xfer) */ xfer->isoc_time_complete = usb_isoc_time_expand(&sc->sc_bus, nframes) + buf_offset + - ((xfer->nframes + 7) / 8); + (((xfer->nframes << shift) + 7) / 8); /* get the real number of frames */