Add initial configuration files for the MT7620 and RT5350 SoCs.
These are all works in progress. Notably - no wifi support just yet! I've booted the MT7620 on a TP-Link Archer C2 via tftpboot. Submitted by: Stanislav Galabov <sgalabov@gmail.com>
This commit is contained in:
Adrian Chadd
parent
43747185a0
commit
d5c2c0134b
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=292712
149
sys/mips/conf/MT7620
Normal file
149
sys/mips/conf/MT7620
Normal file
@ -0,0 +1,149 @@
|
||||
# MT7620 -- Kernel configuration file for FreeBSD/mips for Ralink MT7620 systems
|
||||
#
|
||||
# For more information on this file, please read the handbook section on
|
||||
# Kernel Configuration Files:
|
||||
#
|
||||
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
||||
#
|
||||
# The handbook is also available locally in /usr/share/doc/handbook
|
||||
# if you've installed the doc distribution, otherwise always see the
|
||||
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
||||
# latest information.
|
||||
#
|
||||
# An exhaustive list of options and more detailed explanations of the
|
||||
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
||||
# If you are in doubt as to the purpose or necessity of a line, check first
|
||||
# in NOTES.
|
||||
#
|
||||
# $FreeBSD$
|
||||
|
||||
ident MT7620
|
||||
|
||||
machine mips mipsel
|
||||
makeoptions MIPS_LITTLE_ENDIAN=defined
|
||||
makeoptions KERNLOADADDR=0x80010000
|
||||
|
||||
# Don't build any modules yet.
|
||||
#makeoptions MODULES_OVERRIDE="wlan_xauth wlan_wep wlan_tkip wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt if_bridge bridgestp msdosfs md ipfw dummynet libalias geom/geom_label ufs usb/uplcom usb/u3g usb/umodem usb/umass usb/ucom cam zlib"
|
||||
makeoptions MODULES_OVERRIDE=""
|
||||
makeoptions MT7620
|
||||
|
||||
include "../rt305x/std.rt305x"
|
||||
|
||||
hints "MT7620.hints" #Default places to look for devices.
|
||||
|
||||
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
|
||||
options MT7620
|
||||
options RT305X_UBOOT
|
||||
|
||||
# Debugging for use in -current
|
||||
options DEADLKRES #Enable the deadlock resolver
|
||||
options INVARIANTS #Enable calls of extra sanity checking
|
||||
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
|
||||
options WITNESS #Enable checks to detect deadlocks and cycles
|
||||
options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
|
||||
#options DIAGNOSTIC
|
||||
#options DEBUG_LOCKS
|
||||
#options DEBUG_VFS_LOCKS
|
||||
#options GDB
|
||||
options DDB
|
||||
options KDB
|
||||
|
||||
options SCHED_ULE
|
||||
#options SCHED_4BSD #4BSD scheduler
|
||||
#options COMPAT_43
|
||||
options INET #InterNETworking
|
||||
options NFSCL #Network Filesystem Client
|
||||
options NFS_ROOT #NFS usable as /, requires NFSCL
|
||||
options PSEUDOFS #Pseudo-filesystem framework
|
||||
#options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
|
||||
|
||||
#options BOOTP
|
||||
#options BOOTP_NFSROOT
|
||||
#options BOOTP_NFSV3
|
||||
#options BOOTP_WIRED_TO=rt0
|
||||
#options BOOTP_COMPAT
|
||||
#options CD9660 # ISO 9660 Filesystem
|
||||
#options ROOTDEVNAME=\"cd9660:/dev/map/rootfs.uncompress\"
|
||||
#options TMPFS # TMP Memory Filesystem
|
||||
|
||||
options FFS #Berkeley Fast Filesystem
|
||||
#options SOFTUPDATES #Enable FFS soft updates support
|
||||
#options UFS_ACL #Support for access control lists
|
||||
#options UFS_DIRHASH #Improve performance on big directories
|
||||
#options ROOTDEVNAME=\"nfs:10.0.0.1:/mnt/bsd\"
|
||||
|
||||
# Options for making kernel less hangry
|
||||
#makeoptions INLINE_LIMIT=1024
|
||||
#options MAXUSERS=3
|
||||
#options MAXFILES=512
|
||||
#options NSFBUFS=256
|
||||
#options SHMALL=128
|
||||
#options MSGBUF_SIZE=65536
|
||||
|
||||
# Options for making kernel smallest
|
||||
#options NO_SYSCTL_DESCR # No description string of sysctl
|
||||
#options NO_FFS_SNAPSHOT # Disable Snapshot supporting
|
||||
#options SCSI_NO_SENSE_STRINGS
|
||||
#options SCSI_NO_OP_STRINGS
|
||||
#options RWLOCK_NOINLINE
|
||||
#options SX_NOINLINE
|
||||
#options NO_SWAPPING
|
||||
options MROUTING # Multicast routing
|
||||
options IPFIREWALL_DEFAULT_TO_ACCEPT
|
||||
|
||||
options GEOM_UNCOMPRESS
|
||||
options MD_ROOT
|
||||
options ROOTDEVNAME=\"ufs:da0s1\"
|
||||
|
||||
device md
|
||||
|
||||
device random
|
||||
device loop
|
||||
# RT3050F, RT3052F have only pseudo PHYs, so mii not required
|
||||
device rt
|
||||
|
||||
device spibus
|
||||
device mx25l
|
||||
|
||||
device ether
|
||||
device miibus
|
||||
device bpf # Berkeley packet filter
|
||||
device vlan
|
||||
device lagg
|
||||
device if_bridge
|
||||
device uart
|
||||
nodevice uart_ns8250
|
||||
#device tun # Packet tunnel.
|
||||
|
||||
#device wlan
|
||||
|
||||
|
||||
#device gpio
|
||||
#device gpioled
|
||||
|
||||
#device cfi # Detect Flash memmory
|
||||
#device cfid
|
||||
|
||||
#device nvram2env
|
||||
|
||||
device usb
|
||||
device ehci
|
||||
#device ohci
|
||||
#device dwcotg # DWC like USB OTG Controller driver
|
||||
#device u3g
|
||||
#device umodem
|
||||
#device uplcom
|
||||
device cdce
|
||||
device umass
|
||||
device da
|
||||
device pass
|
||||
device scbus
|
||||
options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI
|
||||
|
||||
#options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
|
||||
#options USB_DEBUG
|
||||
#options USB_REQ_DEBUG
|
||||
|
||||
device pci
|
||||
143
sys/mips/conf/MT7620.hints
Normal file
143
sys/mips/conf/MT7620.hints
Normal file
@ -0,0 +1,143 @@
|
||||
# $FreeBSD$
|
||||
# device.hints
|
||||
hint.obio.0.at="nexus0"
|
||||
hint.obio.0.maddr=0x10000000
|
||||
hint.obio.0.msize=0x10000000
|
||||
|
||||
hint.pcib.0.at="nexus0"
|
||||
hint.pcib.0.maddr=0x10140000
|
||||
hint.pcib.0.msize=0x30000
|
||||
|
||||
hint.mx25l.0.at="spibus0"
|
||||
|
||||
#hint.nvram.0.sig=0xe5e60a74
|
||||
#hint.nvram.0.base=0x1f030000
|
||||
#hint.nvram.0.maxsize=0x2000
|
||||
#hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
|
||||
#hint.nvram.1.sig=0x5a045e94
|
||||
#hint.nvram.1.base=0x1f032000
|
||||
#hint.nvram.1.maxsize=0x4000
|
||||
#hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
|
||||
|
||||
# on-board Ralink Frame Engine
|
||||
hint.rt.0.at="nexus0"
|
||||
hint.rt.0.maddr=0x10100000
|
||||
hint.rt.0.msize=0x10000
|
||||
hint.rt.0.irq=3
|
||||
# macaddr can be statically set
|
||||
#hint.rt.0.macaddr="xx:xx:xx:xx:xx:xx"
|
||||
|
||||
# on-board Ralink 2872 802.11n core
|
||||
hint.rt2860.0.at="nexus0"
|
||||
hint.rt2860.0.maddr=0x10180000
|
||||
hint.rt2860.0.msize=0x40000
|
||||
hint.rt2860.0.irq=4
|
||||
|
||||
# uart0
|
||||
#hint.uart.0.at="obio0"
|
||||
#hint.uart.0.maddr=0x10000C00
|
||||
#hint.uart.0.msize=0x100
|
||||
#hint.uart.0.irq=12
|
||||
#hint.uart.0.flags="0x30"
|
||||
|
||||
# uart1
|
||||
#hint.uart.1.at="obio0"
|
||||
#hint.uart.1.maddr=0x10000500
|
||||
#hint.uart.1.msize=0x100
|
||||
#hint.uart.1.irq=5
|
||||
#hint.uart.1.flags="0x30"
|
||||
|
||||
|
||||
# gpio
|
||||
# GPIO0 - WPS BTN IN II IO
|
||||
#hint.gpiobutton.0.at="gpiobus0"
|
||||
#hint.gpiobutton.0.pins="0x01"
|
||||
#hint.gpiobutton.0.name="wps"
|
||||
#hint.gpiobutton.0.flags="0x0581"
|
||||
|
||||
# GPIO7 - MODE SW AP IN II IO
|
||||
#hint.gpiobutton.1.at="gpiobus0"
|
||||
#hint.gpiobutton.1.pins="0x80"
|
||||
#hint.gpiobutton.1.name="mode_ap"
|
||||
#hint.gpiobutton.1.flags="0x0581"
|
||||
|
||||
# GPIO8 - ST LEDRED OUT /* 2pin BiDir RED/BLUE LED */
|
||||
# GPIO9 - ST LEDBLUE OUT
|
||||
#hint.gpioled.0.at="gpiobus0"
|
||||
#hint.gpioled.0.pins="0x100"
|
||||
#hint.gpioled.0.name="status_red"
|
||||
#hint.gpioled.0.flags="0x0002"
|
||||
#hint.gpioled.1.at="gpiobus0"
|
||||
#hint.gpioled.1.pins="0x200"
|
||||
#hint.gpioled.1.name="status_blue"
|
||||
#hint.gpioled.1.name="status"
|
||||
#hint.gpioled.1.flags="0x0002"
|
||||
|
||||
# GPIO10 - RST BTN IN II IO
|
||||
#hint.gpiobutton.2.at="gpiobus0"
|
||||
#hint.gpiobutton.2.pins="0x400"
|
||||
##hint.gpiobutton.2.name="reset"
|
||||
#hint.gpiobutton.2.flags="0x0581"
|
||||
|
||||
# GPIO11 - MODE SW CL IN II IO
|
||||
#hint.gpiobutton.3.at="gpiobus0"
|
||||
#hint.gpiobutton.3.pins="0x800"
|
||||
#hint.gpiobutton.3.name="mode_wlan_client"
|
||||
#hint.gpiobutton.3.flags="0x0581"
|
||||
|
||||
# GPIO14 - WPS LED OUT II IO
|
||||
#hint.gpioled.2.at="gpiobus0"
|
||||
#hint.gpioled.2.pins="0x4000"
|
||||
#hint.gpioled.2.name="wps"
|
||||
#hint.gpioled.2.flags="0x0182"
|
||||
|
||||
|
||||
|
||||
#0x00000000-0x00030000 : "Bootloader"
|
||||
#0x00030000-0x00040000 : "Factory"
|
||||
#0x00040000-0x00070000 : "Config"
|
||||
#0x00070000-0x000b0000 : "Language"
|
||||
#0x000b0000-0x001a0000 : "Kernel"
|
||||
#0x001a0000-0x01000000 : "RootFS"
|
||||
|
||||
#hint.map.0.at="cfid0"
|
||||
#hint.map.0.start=0x00000000
|
||||
#hint.map.0.end=0x00030000
|
||||
#hint.map.0.name="bootloader"
|
||||
#hint.map.0.readonly=1
|
||||
|
||||
#hint.map.1.at="cfid0"
|
||||
#hint.map.1.start=0x00030000
|
||||
#hint.map.1.end=0x00040000
|
||||
#hint.map.1.name="factory"
|
||||
|
||||
#hint.map.2.at="cfid0"
|
||||
#hint.map.2.start=0x00040000
|
||||
#hint.map.2.end=0x00800000
|
||||
#hint.map.2.name="upgrade"
|
||||
|
||||
#hint.map.3.at="cfid0"
|
||||
#hint.map.3.start=0x00040000
|
||||
#hint.map.3.end=0x00050000
|
||||
#hint.map.3.name="config"
|
||||
|
||||
#hint.map.4.at="cfid0"
|
||||
#hint.map.4.start=0x00000000
|
||||
#hint.map.4.end=0x00000000
|
||||
#hint.map.4.name="language"
|
||||
|
||||
#hint.map.5.at="cfid0"
|
||||
#hint.map.5.start=0x00050000
|
||||
#hint.map.5.end=0x00150000
|
||||
#hint.map.5.name="kernel"
|
||||
|
||||
#hint.map.6.at="cfid0"
|
||||
#hint.map.6.start=0x00150000
|
||||
#hint.map.6.end=0x00800000
|
||||
#hint.map.6.name="rootfs"
|
||||
|
||||
|
||||
#hint.rt.0.phymask=0x1f
|
||||
#hint.rt.0.media=100
|
||||
#hint.rt.0.fduplex=1
|
||||
|
||||
125
sys/mips/conf/RT5350
Normal file
125
sys/mips/conf/RT5350
Normal file
@ -0,0 +1,125 @@
|
||||
# RT5350 -- Kernel configuration file for FreeBSD/mips for Ralink RT5350 systems
|
||||
#
|
||||
# For more information on this file, please read the handbook section on
|
||||
# Kernel Configuration Files:
|
||||
#
|
||||
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
||||
#
|
||||
# The handbook is also available locally in /usr/share/doc/handbook
|
||||
# if you've installed the doc distribution, otherwise always see the
|
||||
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
||||
# latest information.
|
||||
#
|
||||
# An exhaustive list of options and more detailed explanations of the
|
||||
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
||||
# If you are in doubt as to the purpose or necessity of a line, check first
|
||||
# in NOTES.
|
||||
#
|
||||
# $FreeBSD$
|
||||
|
||||
ident RT5350
|
||||
|
||||
machine mips mipsel
|
||||
makeoptions MIPS_LITTLE_ENDIAN=defined
|
||||
makeoptions KERNLOADADDR=0x80001000
|
||||
|
||||
# Don't build any modules yet.
|
||||
makeoptions MODULES_OVERRIDE="wlan_xauth wlan_wep wlan_tkip wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt if_bridge bridgestp msdosfs md ipfw dummynet libalias geom/geom_label ufs usb/uplcom usb/u3g usb/umodem usb/umass usb/ucom cam zlib"
|
||||
makeoptions RT5350
|
||||
|
||||
include "../rt305x/std.rt305x"
|
||||
|
||||
hints "RT5350.hints" #Default places to look for devices.
|
||||
|
||||
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
|
||||
options RT5350
|
||||
options RT305X_UBOOT
|
||||
|
||||
# Debugging for use in -current
|
||||
options DEADLKRES #Enable the deadlock resolver
|
||||
options INVARIANTS #Enable calls of extra sanity checking
|
||||
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
|
||||
options WITNESS #Enable checks to detect deadlocks and cycles
|
||||
options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
|
||||
#options DIAGNOSTIC
|
||||
#options DEBUG_LOCKS
|
||||
#options DEBUG_VFS_LOCKS
|
||||
#options GDB
|
||||
options DDB
|
||||
options KDB
|
||||
|
||||
options SCHED_ULE
|
||||
options INET #InterNETworking
|
||||
#options NFSCL #Network Filesystem Client
|
||||
#options NFS_ROOT #NFS usable as /, requires NFSCL
|
||||
options PSEUDOFS #Pseudo-filesystem framework
|
||||
#options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
|
||||
|
||||
#options BOOTP
|
||||
#options BOOTP_NFSROOT
|
||||
#options BOOTP_NFSV3
|
||||
#options BOOTP_WIRED_TO=rt0
|
||||
#options BOOTP_COMPAT
|
||||
|
||||
options TMPFS # TMP Memory Filesystem
|
||||
|
||||
options FFS #Berkeley Fast Filesystem
|
||||
#options ROOTDEVNAME=\"nfs:193.178.153.200:/bsdmips\"
|
||||
|
||||
#device geom_uncompress
|
||||
#options GEOM_UNCOMPRESS
|
||||
#options MD_ROOT
|
||||
#options ROOTDEVNAME=\"ufs:md0.uncompress\"
|
||||
|
||||
# Options for making kernel less hangry
|
||||
makeoptions INLINE_LIMIT=1024
|
||||
options MAXUSERS=3
|
||||
options MAXFILES=512
|
||||
options NSFBUFS=256
|
||||
options SHMALL=128
|
||||
options MSGBUF_SIZE=65536
|
||||
|
||||
# Options for making kernel smallest
|
||||
options NO_SYSCTL_DESCR # No description string of sysctl
|
||||
#options NO_FFS_SNAPSHOT # Disable Snapshot supporting
|
||||
options SCSI_NO_SENSE_STRINGS
|
||||
options SCSI_NO_OP_STRINGS
|
||||
options RWLOCK_NOINLINE
|
||||
options SX_NOINLINE
|
||||
options NO_SWAPPING
|
||||
options MROUTING # Multicast routing
|
||||
options IPFIREWALL_DEFAULT_TO_ACCEPT
|
||||
|
||||
#device md
|
||||
device random
|
||||
device loop
|
||||
# RT3050F, RT3052F have only pseudo PHYs, so mii not required
|
||||
device rt
|
||||
|
||||
device ether
|
||||
device bpf # Berkeley packet filter
|
||||
device vlan
|
||||
#device lagg
|
||||
#device if_bridge
|
||||
device uart
|
||||
nodevice uart_ns8250
|
||||
device tun # Packet tunnel.
|
||||
|
||||
device wlan
|
||||
|
||||
#device gpio
|
||||
#device gpioled
|
||||
|
||||
#device nvram2env
|
||||
|
||||
device spibus
|
||||
device mx25l
|
||||
|
||||
device usb
|
||||
device ehci
|
||||
options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI
|
||||
|
||||
#options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
|
||||
#options USB_DEBUG
|
||||
#options USB_REQ_DEBUG
|
||||
35
sys/mips/conf/RT5350.hints
Normal file
35
sys/mips/conf/RT5350.hints
Normal file
@ -0,0 +1,35 @@
|
||||
# $FreeBSD$
|
||||
# device.hints
|
||||
hint.obio.0.at="nexus0"
|
||||
hint.obio.0.maddr=0x10000000
|
||||
hint.obio.0.msize=0x10000000
|
||||
|
||||
hint.mx25l.0.at="spibus0"
|
||||
|
||||
#hint.nvram.0.sig=0xe5e60a74
|
||||
#hint.nvram.0.base=0x1f030000
|
||||
#hint.nvram.0.maxsize=0x2000
|
||||
#hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
|
||||
#hint.nvram.1.sig=0x5a045e94
|
||||
#hint.nvram.1.base=0x1f032000
|
||||
#hint.nvram.1.maxsize=0x4000
|
||||
#hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
|
||||
|
||||
# on-board Ralink Frame Engine
|
||||
hint.rt.0.at="nexus0"
|
||||
hint.rt.0.maddr=0x10100000
|
||||
hint.rt.0.msize=0x10000
|
||||
hint.rt.0.irq=3
|
||||
# macaddr can be statically set
|
||||
#hint.rt.0.macaddr="xx:xx:xx:xx:xx:xx"
|
||||
|
||||
# on-board Ralink 2872 802.11n core
|
||||
hint.rt2860.0.at="nexus0"
|
||||
hint.rt2860.0.maddr=0x10180000
|
||||
hint.rt2860.0.msize=0x40000
|
||||
hint.rt2860.0.irq=4
|
||||
|
||||
hint.rt.0.phymask=0x1f
|
||||
hint.rt.0.media=100
|
||||
hint.rt.0.fduplex=1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user