MFNetBSD ehci.c and ehcireg.h
ehci.c (1.55), ehcireg.h (1.16); author: mycroft
Set the data toggle correctly, and use EHCI_QTD_DTC. This fixes
problems with my ALi-based drive enclosure (it works now, rather
than failing to attach). Also seems to work with a GL811-based
enclosure and an ASUS enclosure with a CD-RW, on both Intel and
NEC controllers.
Note: The ALi enclosure is currently very SLOW, due to some issue
with taking too long to notice that the QTD is complete. This
requires more investigation.
ehci.c (1.56); author: mycroft
Failure to properly mask off UE_DIR_IN from the endpoint address
was causing OHCI_ED_FORMAT_ISO and EHCI_QH_HRECL to get set
spuriously, causing rather interesting lossage.
Suddenly I get MUCH better performance with ehci...
ehci.c (1.58); author: mycroft
Fix a stupid bug in ehci_check_intr() that caused use to try to
complete a transaction that was still running. Now ehci can
handle multiple devices being active at once.
ehci.c (1.59); author: enami
As the ehci_idone() now uses the variable `epipe'
unconditionally, always declare it (in other words, make this
file compile w/o EHCI_DEBUG).
ehci.c (1.60); author: mycroft
Remove comment about the data toggle being borked.
ehci.c (1.61); author: mycroft
Update comment.
ehci.c (1.62); author: mycroft
Adjust a couple of comments to make it clear WTF is going on.
ehci.c (1.63); author: mycroft
Fix an error in a debug printf().
ehci.c (1.64), ehcireg.h (1.17); author: mycroft
Further cleanup of toggle handling. Now that we use EHCI_QH_DTC,
we don't need to fiddle with the TOGGLE bit in the overlay
descriptor, so minimize how much we fuss with it.
Obtained from: NetBSD
This commit is contained in:
Lukas Ertl
parent
e3ce1a4ac4
commit
dae4042053
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=131121
@ -3,6 +3,8 @@
|
||||
/* Also ported from NetBSD:
|
||||
* $NetBSD: ehci.c,v 1.50 2003/10/18 04:50:35 simonb Exp $
|
||||
* $NetBSD: ehci.c,v 1.54 2004/01/17 13:15:05 jdolecek Exp $
|
||||
* up to
|
||||
* $NetBSD: ehci.c,v 1.64 2004/06/23 06:45:56 mycroft Exp $
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -14,11 +16,11 @@
|
||||
__FBSDID("$FreeBSD$");
|
||||
|
||||
/*
|
||||
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
||||
* Copyright (c) 2004 The NetBSD Foundation, Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This code is derived from software contributed to The NetBSD Foundation
|
||||
* by Lennart Augustsson (lennart@augustsson.net).
|
||||
* by Lennart Augustsson (lennart@augustsson.net) and by Charles M. Hannum.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
@ -67,18 +69,14 @@ __FBSDID("$FreeBSD$");
|
||||
* devices using them don't work.
|
||||
* Interrupt transfers are not difficult, it's just not done.
|
||||
*
|
||||
* 3) There might also be some issues with the data toggle, it was not
|
||||
* completely tested to work properly under all condistions. If wrong
|
||||
* toggle would be sent/recvd, bulk data transfers would stop working.
|
||||
*
|
||||
* 4) The meaty part to implement is the support for USB 2.0 hubs.
|
||||
* 3) The meaty part to implement is the support for USB 2.0 hubs.
|
||||
* They are quite compolicated since the need to be able to do
|
||||
* "transaction translation", i.e., converting to/from USB 2 and USB 1.
|
||||
* So the hub driver needs to handle and schedule these things, to
|
||||
* assign place in frame where different devices get to go. See chapter
|
||||
* on hubs in USB 2.0 for details.
|
||||
*
|
||||
* 5) command failures are not recovered correctly
|
||||
* 4) command failures are not recovered correctly
|
||||
*/
|
||||
|
||||
#include <sys/param.h>
|
||||
@ -139,6 +137,8 @@ SYSCTL_INT(_hw_usb_ehci, OID_AUTO, debug, CTLFLAG_RW,
|
||||
|
||||
struct ehci_pipe {
|
||||
struct usbd_pipe pipe;
|
||||
int nexttoggle;
|
||||
|
||||
ehci_soft_qh_t *sqh;
|
||||
union {
|
||||
ehci_soft_qtd_t *qtd;
|
||||
@ -705,7 +705,7 @@ ehci_check_intr(ehci_softc_t *sc, struct ehci_xfer *ex)
|
||||
if (status & EHCI_QTD_HALTED)
|
||||
goto done;
|
||||
/* We want short packets, and it is short: it's done */
|
||||
if (EHCI_QTD_SET_BYTES(status) != 0)
|
||||
if (EHCI_QTD_GET_BYTES(status) != 0)
|
||||
goto done;
|
||||
}
|
||||
DPRINTFN(12, ("ehci_check_intr: ex=%p std=%p still active\n",
|
||||
@ -722,9 +722,7 @@ void
|
||||
ehci_idone(struct ehci_xfer *ex)
|
||||
{
|
||||
usbd_xfer_handle xfer = &ex->xfer;
|
||||
#ifdef EHCI_DEBUG
|
||||
struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe;
|
||||
#endif
|
||||
ehci_soft_qtd_t *sqtd;
|
||||
u_int32_t status = 0, nstatus;
|
||||
int actlen;
|
||||
@ -778,11 +776,12 @@ ehci_idone(struct ehci_xfer *ex)
|
||||
|
||||
/* If there are left over TDs we need to update the toggle. */
|
||||
if (sqtd != NULL) {
|
||||
if (!(xfer->rqflags & URQ_REQUEST))
|
||||
printf("ehci_idone: need toggle update\n");
|
||||
printf("ehci_idone: need toggle update status=%08x nstatus=%08x\n", status, nstatus);
|
||||
#if 0
|
||||
epipe->nexttoggle = EHCI_TD_GET_DT(le32toh(std->td.td_token));
|
||||
ehci_dump_sqh(epipe->sqh);
|
||||
ehci_dump_sqtds(ex->sqtdstart);
|
||||
#endif
|
||||
epipe->nexttoggle = EHCI_QTD_GET_TOGGLE(nstatus);
|
||||
}
|
||||
|
||||
status &= EHCI_QTD_STATERRS;
|
||||
@ -794,9 +793,8 @@ ehci_idone(struct ehci_xfer *ex)
|
||||
char sbuf[128];
|
||||
|
||||
bitmask_snprintf((u_int32_t)status,
|
||||
"\20\3MISSEDMICRO\4XACT\5BABBLE\6BABBLE"
|
||||
"\7HALTED",
|
||||
sbuf, sizeof(sbuf));
|
||||
"\20\7HALTED\6BUFERR\5BABBLE\4XACTERR"
|
||||
"\3MISSED", sbuf, sizeof(sbuf));
|
||||
|
||||
DPRINTFN((status == EHCI_QTD_HALTED)*/*10*/2,
|
||||
("ehci_idone: error, addr=%d, endpt=0x%02x, "
|
||||
@ -1094,7 +1092,7 @@ ehci_device_clear_toggle(usbd_pipe_handle pipe)
|
||||
if (ehcidebug)
|
||||
usbd_dump_pipe(pipe);
|
||||
#endif
|
||||
epipe->sqh->qh.qh_qtd.qtd_status &= htole32(~EHCI_QTD_TOGGLE);
|
||||
epipe->nexttoggle = 0;
|
||||
}
|
||||
|
||||
Static void
|
||||
@ -1253,6 +1251,8 @@ ehci_open(usbd_pipe_handle pipe)
|
||||
if (sc->sc_dying)
|
||||
return (USBD_IOERROR);
|
||||
|
||||
epipe->nexttoggle = 0;
|
||||
|
||||
if (addr == sc->sc_addr) {
|
||||
switch (ed->bEndpointAddress) {
|
||||
case USB_CONTROL_ENDPOINT:
|
||||
@ -1281,9 +1281,9 @@ ehci_open(usbd_pipe_handle pipe)
|
||||
/* qh_link filled when the QH is added */
|
||||
sqh->qh.qh_endp = htole32(
|
||||
EHCI_QH_SET_ADDR(addr) |
|
||||
EHCI_QH_SET_ENDPT(ed->bEndpointAddress) |
|
||||
EHCI_QH_SET_EPS(speed) | /* XXX */
|
||||
/* XXX EHCI_QH_DTC ? */
|
||||
EHCI_QH_SET_ENDPT(UE_GET_ADDR(ed->bEndpointAddress)) |
|
||||
EHCI_QH_SET_EPS(speed) |
|
||||
EHCI_QH_DTC |
|
||||
EHCI_QH_SET_MPL(UGETW(ed->wMaxPacketSize)) |
|
||||
(speed != EHCI_QH_SPEED_HIGH && xfertype == UE_CONTROL ?
|
||||
EHCI_QH_CTL : 0) |
|
||||
@ -1389,8 +1389,8 @@ ehci_set_qh_qtd(ehci_soft_qh_t *sqh, ehci_soft_qtd_t *sqtd)
|
||||
sqh->qh.qh_curqtd = 0;
|
||||
sqh->qh.qh_qtd.qtd_next = htole32(sqtd->physaddr);
|
||||
sqh->sqtd = sqtd;
|
||||
/* Keep toggle, clear the rest, including length. */
|
||||
sqh->qh.qh_qtd.qtd_status &= htole32(EHCI_QTD_TOGGLE);
|
||||
/* Clear halt */
|
||||
sqh->qh.qh_qtd.qtd_status &= htole32(~EHCI_QTD_HALTED);
|
||||
}
|
||||
|
||||
/*
|
||||
@ -2138,8 +2138,8 @@ ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc,
|
||||
ehci_soft_qtd_t *next, *cur;
|
||||
ehci_physaddr_t dataphys, dataphyspage, dataphyslastpage, nextphys;
|
||||
u_int32_t qtdstatus;
|
||||
int len, curlen, offset;
|
||||
int i;
|
||||
int len, curlen, mps, offset;
|
||||
int i, tog;
|
||||
usb_dma_t *dma = &xfer->dmabuf;
|
||||
|
||||
DPRINTFN(alen<4*4096,("ehci_alloc_sqtd_chain: start len=%d\n", alen));
|
||||
@ -2148,14 +2148,20 @@ ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc,
|
||||
len = alen;
|
||||
dataphys = DMAADDR(dma, 0);
|
||||
dataphyslastpage = EHCI_PAGE(DMAADDR(dma, len - 1));
|
||||
#if 0
|
||||
printf("status=%08x toggle=%d\n", epipe->sqh->qh.qh_qtd.qtd_status,
|
||||
epipe->nexttoggle);
|
||||
#endif
|
||||
qtdstatus = htole32(
|
||||
EHCI_QTD_ACTIVE |
|
||||
EHCI_QTD_SET_PID(rd ? EHCI_QTD_PID_IN : EHCI_QTD_PID_OUT) |
|
||||
EHCI_QTD_SET_CERR(3)
|
||||
/* IOC set below */
|
||||
/* BYTES set below */
|
||||
/* XXX Data toggle */
|
||||
);
|
||||
mps = UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize);
|
||||
tog = epipe->nexttoggle;
|
||||
qtdstatus |= EHCI_QTD_SET_TOGGLE(tog);
|
||||
|
||||
cur = ehci_alloc_sqtd(sc);
|
||||
*sp = cur;
|
||||
@ -2200,10 +2206,8 @@ ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc,
|
||||
curlen = EHCI_PAGE_SIZE -
|
||||
EHCI_PAGE_MASK(dataphys);
|
||||
#endif
|
||||
|
||||
/* XXX true for EHCI? */
|
||||
/* the length must be a multiple of the max size */
|
||||
curlen -= curlen % UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize);
|
||||
curlen -= curlen % mps;
|
||||
DPRINTFN(1,("ehci_alloc_sqtd_chain: multiple QTDs, "
|
||||
"curlen=%d\n", curlen));
|
||||
#ifdef DIAGNOSTIC
|
||||
@ -2248,6 +2252,12 @@ ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc,
|
||||
cur->len = curlen;
|
||||
DPRINTFN(10,("ehci_alloc_sqtd_chain: cbp=0x%08x end=0x%08x\n",
|
||||
dataphys, dataphys + curlen));
|
||||
/* adjust the toggle based on the number of packets in this
|
||||
qtd */
|
||||
if (((curlen + mps - 1) / mps) & 1) {
|
||||
tog ^= 1;
|
||||
qtdstatus ^= EHCI_QTD_TOGGLE_MASK;
|
||||
}
|
||||
if (len == 0)
|
||||
break;
|
||||
DPRINTFN(10,("ehci_alloc_sqtd_chain: extend chain\n"));
|
||||
@ -2257,6 +2267,7 @@ ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc,
|
||||
}
|
||||
cur->qtd.qtd_status |= htole32(EHCI_QTD_IOC);
|
||||
*ep = cur;
|
||||
epipe->nexttoggle = tog;
|
||||
|
||||
DPRINTFN(10,("ehci_alloc_sqtd_chain: return sqtd=%p sqtdend=%p\n",
|
||||
*sp, *ep));
|
||||
@ -2571,31 +2582,23 @@ ehci_device_request(usbd_xfer_handle xfer)
|
||||
sqh = epipe->sqh;
|
||||
epipe->u.ctl.length = len;
|
||||
|
||||
/* XXX
|
||||
* Since we're messing with the QH we must know the HC is in sync.
|
||||
* This needs to go away since it slows down control transfers.
|
||||
* Removing it entails:
|
||||
* - fill the QH only once with addr & wMaxPacketSize
|
||||
* - put the correct data toggles in the qtds and set DTC
|
||||
*/
|
||||
/* ehci_sync_hc(sc); */
|
||||
/* Update device address and length since they may have changed. */
|
||||
/* Update device address and length since they may have changed
|
||||
during the setup of the control pipe in usbd_new_device(). */
|
||||
/* XXX This only needs to be done once, but it's too early in open. */
|
||||
/* XXXX Should not touch ED here! */
|
||||
sqh->qh.qh_endp =
|
||||
(sqh->qh.qh_endp & htole32(~(EHCI_QH_ADDRMASK | EHCI_QG_MPLMASK))) |
|
||||
(sqh->qh.qh_endp & htole32(~(EHCI_QH_ADDRMASK | EHCI_QH_MPLMASK))) |
|
||||
htole32(
|
||||
EHCI_QH_SET_ADDR(addr) |
|
||||
/* EHCI_QH_DTC | */
|
||||
EHCI_QH_SET_MPL(UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize))
|
||||
);
|
||||
/* Clear toggle */
|
||||
sqh->qh.qh_qtd.qtd_status &= htole32(~EHCI_QTD_TOGGLE);
|
||||
|
||||
/* Set up data transaction */
|
||||
if (len != 0) {
|
||||
ehci_soft_qtd_t *end;
|
||||
|
||||
/* Start toggle at 1. */
|
||||
epipe->nexttoggle = 1;
|
||||
err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer,
|
||||
&next, &end);
|
||||
if (err)
|
||||
@ -2603,18 +2606,18 @@ ehci_device_request(usbd_xfer_handle xfer)
|
||||
end->nextqtd = stat;
|
||||
end->qtd.qtd_next =
|
||||
end->qtd.qtd_altnext = htole32(stat->physaddr);
|
||||
/* Start toggle at 1. */
|
||||
/*next->qtd.td_flags |= htole32(EHCI_QTD_TOGGLE);*/
|
||||
} else {
|
||||
next = stat;
|
||||
}
|
||||
|
||||
memcpy(KERNADDR(&epipe->u.ctl.reqdma, 0), req, sizeof *req);
|
||||
|
||||
/* Clear toggle */
|
||||
setup->qtd.qtd_status = htole32(
|
||||
EHCI_QTD_ACTIVE |
|
||||
EHCI_QTD_SET_PID(EHCI_QTD_PID_SETUP) |
|
||||
EHCI_QTD_SET_CERR(3) |
|
||||
EHCI_QTD_SET_TOGGLE(0) |
|
||||
EHCI_QTD_SET_BYTES(sizeof *req)
|
||||
);
|
||||
setup->qtd.qtd_buffer[0] = htole32(DMAADDR(&epipe->u.ctl.reqdma, 0));
|
||||
@ -2628,6 +2631,7 @@ ehci_device_request(usbd_xfer_handle xfer)
|
||||
EHCI_QTD_ACTIVE |
|
||||
EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_OUT : EHCI_QTD_PID_IN) |
|
||||
EHCI_QTD_SET_CERR(3) |
|
||||
EHCI_QTD_SET_TOGGLE(1) |
|
||||
EHCI_QTD_IOC
|
||||
);
|
||||
stat->qtd.qtd_buffer[0] = 0; /* XXX not needed? */
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
/* $NetBSD: ehcireg.h,v 1.15 2004/06/12 16:02:42 mycroft Exp $ */
|
||||
/* $NetBSD: ehcireg.h,v 1.17 2004/06/23 06:45:56 mycroft Exp $ */
|
||||
/* $FreeBSD$ */
|
||||
|
||||
/*
|
||||
@ -233,7 +233,8 @@ typedef struct {
|
||||
#define EHCI_QTD_GET_BYTES(x) (((x) >> 16) & 0x7fff)
|
||||
#define EHCI_QTD_SET_BYTES(x) ((x) << 16)
|
||||
#define EHCI_QTD_GET_TOGGLE(x) (((x) >> 31) & 0x1)
|
||||
#define EHCI_QTD_TOGGLE 0x80000000
|
||||
#define EHCI_QTD_SET_TOGGLE(x) ((x) << 31)
|
||||
#define EHCI_QTD_TOGGLE_MASK 0x80000000
|
||||
ehci_physaddr_t qtd_buffer[EHCI_QTD_NBUFFERS];
|
||||
ehci_physaddr_t qtd_buffer_hi[EHCI_QTD_NBUFFERS];
|
||||
} ehci_qtd_t;
|
||||
@ -261,7 +262,7 @@ typedef struct {
|
||||
#define EHCI_QH_HRECL 0x00008000
|
||||
#define EHCI_QH_GET_MPL(x) (((x) >> 16) & 0x7ff) /* max packet len */
|
||||
#define EHCI_QH_SET_MPL(x) ((x) << 16)
|
||||
#define EHCI_QG_MPLMASK 0x07ff0000
|
||||
#define EHCI_QH_MPLMASK 0x07ff0000
|
||||
#define EHCI_QH_GET_CTL(x) (((x) >> 27) & 0x01) /* control endpoint */
|
||||
#define EHCI_QH_CTL 0x08000000
|
||||
#define EHCI_QH_GET_NRL(x) (((x) >> 28) & 0x0f) /* NAK reload */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user