d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

dts: Update our device tree sources files from Linux 4.15

Browse Source
This commit is contained in:
Emmanuel Vadot 2018-02-10 15:29:46 +00:00
parent 0ed20b78b7
commit dc9b494e2b
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=329104
501 changed files with 23769 additions and 11473 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
sys/gnu/dts/arm/am33xx.dtsi
View File

@ -130,9 +130,11 @@
};
};
pmu {
pmu@4b000000 {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
reg = <0x4b000000 0x1000000>;
ti,hwmods = "debugss";
};
/*
@ -628,6 +630,7 @@
reg-names = "phy";
status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb0: usb@47401000 {
@ -676,6 +679,7 @@
reg-names = "phy";
status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb1: usb@47401800 {
@ -929,6 +933,12 @@
};
};
emif: emif@4c000000 {
compatible = "ti,emif-am3352";
reg = <0x4c000000 0x1000000>;
ti,hwmods = "emif";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";

6
sys/gnu/dts/arm/am4372.dtsi
View File

@ -927,7 +927,8 @@
reg = <0x48038000 0x2000>,
<0x46000000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 8 2>,
@ -941,7 +942,8 @@
reg = <0x4803C000 0x2000>,
<0x46400000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <82>, <83>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 10 2>,

4
sys/gnu/dts/arm/am437x-cm-t43.dts
View File

@ -301,8 +301,8 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
dmas = <&edma 16
&edma 17>;
dmas = <&edma 16 0
&edma 17 0>;
dma-names = "tx0", "rx0";
flash: w25q64cvzpig@0 {

239
sys/gnu/dts/arm/am43x-epos-evm.dts
View File

@ -75,6 +75,9 @@
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&matrix_keypad_default>;
pinctrl-1 = <&matrix_keypad_sleep>;
row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
&gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
@ -145,6 +148,43 @@
};
&am43xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&unused_pins>;
unused_pins: unused_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
@ -198,7 +238,7 @@
>;
};
nand_flash_x8: nand_flash_x8 {
nand_flash_x8_default: nand_flash_x8_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
@ -219,12 +259,39 @@
>;
};
ecap0_pins: backlight_pins {
nand_flash_x8_sleep: nand_flash_x8_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
ecap0_pins_default: backlight_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
ecap0_pins_sleep: backlight_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
@ -232,7 +299,7 @@
>;
};
spi0_pins: pinmux_spi0_pins {
spi0_pins_default: pinmux_spi0_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
@ -241,7 +308,16 @@
>;
};
spi1_pins: pinmux_spi1_pins {
spi0_pins_sleep: pinmux_spi0_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
spi1_pins_default: pinmux_spi1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
@ -250,13 +326,54 @@
>;
};
mmc1_pins: pinmux_mmc1_pins {
spi1_pins_sleep: pinmux_spi1_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
qspi1_default: qspi1_default {
mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
>;
};
matrix_keypad_default: matrix_keypad_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* mii1_tx_clk.gpio3_9 */
AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7) /* mii1_rx_clk.gpio3_10 */
AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd3.gpio2_18 */
AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7) /* mii1_rxd2.gpio2_19 */
AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.gpio0_14 */
AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.gpio0_15 */
>;
};
matrix_keypad_sleep: matrix_keypad_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
qspi1_pins_default: qspi1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
@ -267,12 +384,29 @@
>;
};
pixcir_ts_pins: pixcir_ts_pins {
qspi1_pins_sleep: qspi1_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
pixcir_ts_pins_default: pixcir_ts_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
@ -355,6 +489,48 @@
>;
};
uart0_pins_default: uart0_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart0_pins_sleep: uart0_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
>;
};
usb2_phy1_default: usb2_phy1_default {
pinctrl-single,pins = <
AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
>;
};
usb2_phy1_sleep: usb2_phy1_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
usb2_phy2_default: usb2_phy2_default {
pinctrl-single,pins = <
AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
>;
};
usb2_phy2_sleep: usb2_phy2_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
@ -378,8 +554,9 @@
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_sleep>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
@ -478,8 +655,10 @@
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
pinctrl-names = "default";
pinctrl-0 = <&pixcir_ts_pins>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pixcir_ts_pins_default>;
pinctrl-1 = <&pixcir_ts_pins_sleep>;
reg = <0x5c>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
@ -550,8 +729,9 @@
&gpmc {
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&nand_flash_x8_default>;
pinctrl-1 = <&nand_flash_x8_sleep>;
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
@ -647,24 +827,30 @@
&ecap0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&ecap0_pins_default>;
pinctrl-1 = <&ecap0_pins_sleep>;
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi0_pins_default>;
pinctrl-1 = <&spi0_pins_sleep>;
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi1_pins_default>;
pinctrl-1 = <&spi1_pins_sleep>;
};
&usb2_phy1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb2_phy1_default>;
pinctrl-1 = <&usb2_phy1_sleep>;
};
&usb1 {
@ -674,6 +860,9 @@
&usb2_phy2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&usb2_phy2_default>;
pinctrl-1 = <&usb2_phy2_sleep>;
};
&usb2 {
@ -683,8 +872,9 @@
&qspi {
status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
pinctrl-names = "default";
pinctrl-0 = <&qspi1_default>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi1_pins_default>;
pinctrl-1 = <&qspi1_pins_sleep>;
spi-max-frequency = <48000000>;
m25p80@0 {
@ -770,6 +960,13 @@
};
};
&uart0 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_pins_default>;
pinctrl-1 = <&uart0_pins_sleep>;
};
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";

12
sys/gnu/dts/arm/armada-370-synology-ds213j.dts
View File

@ -316,32 +316,32 @@
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
partition@0 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
partition@000c0000 { /* uImage */
partition@c0000 { /* uImage */
label = "zImage";
reg = <0x000c0000 0x002d0000>; /* 2880KB */
};
partition@00390000 { /* uInitramfs */
partition@390000 { /* uInitramfs */
label = "rd.gz";
reg = <0x00390000 0x00440000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
partition@7d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};

1
sys/gnu/dts/arm/armada-385-db-ap.dts
View File

@ -236,6 +236,7 @@
usb3_phy: usb3_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_xhci0_vbus>;
#phy-cells = <0>;
};
reg_xhci0_vbus: xhci0-vbus {

1
sys/gnu/dts/arm/armada-385-linksys.dtsi
View File

@ -66,6 +66,7 @@
usb3_1_phy: usb3_1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&usb3_1_vbus>;
#phy-cells = <0>;
};
usb3_1_vbus: usb3_1-vbus {

14
sys/gnu/dts/arm/armada-385-synology-ds116.dts
View File

@ -191,11 +191,13 @@
usb3_0_phy: usb3_0_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_0_vbus>;
#phy-cells = <0>;
};
usb3_1_phy: usb3_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_1_vbus>;
#phy-cells = <0>;
};
reg_usb3_0_vbus: usb3-vbus0 {
@ -267,35 +269,35 @@
* enumerated. The MAC address and the serial number are listed
* in the "vendor" partition.
*/
partition@00000000 {
partition@0 {
label = "RedBoot";
reg = <0x00000000 0x000f0000>;
read-only;
};
partition@000c0000 {
partition@c0000 {
label = "zImage";
reg = <0x000f0000 0x002d0000>;
};
partition@00390000 {
partition@390000 {
label = "rd.gz";
reg = <0x003c0000 0x00410000>;
};
partition@007d0000 {
partition@7d0000 {
label = "vendor";
reg = <0x007d0000 0x00010000>;
read-only;
};
partition@007e0000 {
partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>;
read-only;
};
partition@007f0000 {
partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>;
read-only;

2
sys/gnu/dts/arm/armada-388-gp.dts
View File

@ -276,11 +276,13 @@
usb2_1_phy: usb2_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb2_1_vbus>;
#phy-cells = <0>;
};
usb3_phy: usb3_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_vbus>;
#phy-cells = <0>;
};
reg_usb3_vbus: usb3-vbus {

12
sys/gnu/dts/arm/armada-xp-synology-ds414.dts
View File

@ -332,32 +332,32 @@
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
partition@0 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000d0000>; /* 832KB */
};
partition@000c0000 { /* uImage */
partition@c0000 { /* uImage */
label = "zImage";
reg = <0x000d0000 0x002d0000>; /* 2880KB */
};
partition@003a0000 { /* uInitramfs */
partition@3a0000 { /* uInitramfs */
label = "rd.gz";
reg = <0x003a0000 0x00430000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
partition@7d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
partition@7e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
partition@7f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};

3
sys/gnu/dts/arm/artpec6.dtsi
View File

@ -151,7 +151,6 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
interrupt-parent = <&intc>;
};
pcie: pcie@f8050000 {
@ -185,7 +184,6 @@
compatible = "simple-bus";
#address-cells = <0x1>;
#size-cells = <0x1>;
interrupt-parent = <&intc>;
ranges;
dma-ranges = <0x80000000 0x00000000 0x40000000>;
dma-coherent;
@ -195,7 +193,6 @@
clocks = <&eth_phy_ref_clk>,
<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
compatible = "snps,dwc-qos-ethernet-4.10";
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf8010000 0x4000>;

19
sys/gnu/dts/arm/aspeed-ast2500-evb.dts
View File

@ -60,3 +60,22 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c3 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
pagesize = <16>;
};
};
&i2c7 {
status = "okay";
lm75@4d {
compatible = "national,lm75";
reg = <0x4d>;
};
};

56
sys/gnu/dts/arm/aspeed-bmc-opp-palmetto.dts
View File

@ -7,10 +7,6 @@
model = "Palmetto BMC";
compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
aliases {
serial4 = &uart5;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
@ -62,3 +58,55 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
&i2c0 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
pagesize = <64>;
};
rtc@68 {
compatible = "dallas,ds3231";
reg = <0x68>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
tmp423@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&vuart {
status = "okay";
};

58
sys/gnu/dts/arm/aspeed-bmc-opp-romulus.dts
View File

@ -80,3 +80,61 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
/* PCIe slot 1 (x8) */
status = "okay";
};
&i2c7 {
/* PCIe slot 2 (x16) */
status = "okay";
};
&i2c8 {
/* PCIe slot 3 (x16) */
status = "okay";
};
&i2c9 {
/* PCIe slot 4 (x16) */
status = "okay";
};
&i2c10 {
/* PCIe slot 5 (x8) */
status = "okay";
};
&i2c11 {
status = "okay";
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
};
&i2c12 {
status = "okay";
};
&vuart {
status = "okay";
};

1832
sys/gnu/dts/arm/aspeed-g4.dtsi
View File

File diff suppressed because it is too large Load Diff

1972
sys/gnu/dts/arm/aspeed-g5.dtsi
View File

File diff suppressed because it is too large Load Diff

4
sys/gnu/dts/arm/at91-ariag25.dts
View File

@ -147,12 +147,12 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
status = "okay";
};
};

4
sys/gnu/dts/arm/at91-ariettag25.dts
View File

@ -59,12 +59,12 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
status = "okay";
};
};

4
sys/gnu/dts/arm/at91-cosino_mega2560.dts
View File

@ -62,7 +62,7 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
@ -71,7 +71,7 @@
>;
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
status = "okay";
};
};

4
sys/gnu/dts/arm/at91-kizbox2.dts
View File

@ -133,11 +133,11 @@
};
};
usb1: ohci@00600000 {
usb1: ohci@600000 {
status = "okay";
};
usb2: ehci@00700000 {
usb2: ehci@700000 {
status = "okay";
};

4
sys/gnu/dts/arm/at91-kizboxmini.dts
View File

@ -59,12 +59,12 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
num-ports = <1>;
status = "okay";
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
status = "okay";
};

52
sys/gnu/dts/arm/at91-sama5d27_som1_ek.dts
View File

@ -53,19 +53,27 @@
model = "Atmel SAMA5D27 SOM1 EK";
compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
aliases {
serial0 = &uart1; /* DBGU */
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
i2c1 = &i2c1;
i2c2 = &i2c2;
};
chosen {
stdout-path = "serial0:115200n8";
};
ahb {
usb0: gadget@00300000 {
usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00400000 {
usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
&pioA PIN_PA27 GPIO_ACTIVE_HIGH
@ -76,7 +84,7 @@
status = "okay";
};
usb2: ehci@00500000 {
usb2: ehci@500000 {
status = "okay";
};
@ -128,12 +136,14 @@
};
pwm0: pwm@f802c000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
status = "disabled"; /* Conflict with leds. */
};
flx1: flexcom@f8038000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "disabled";
status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
@ -147,7 +157,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
status = "disabled";
status = "okay";
};
};
@ -165,17 +175,12 @@
status = "okay";
};
can0: can@f8054000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
};
uart3: serial@fc008000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "disabled";
status = "disabled"; /* Conflict with isc. */
};
uart4: serial@fc00c000 {
@ -199,7 +204,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <32>;
status = "disabled";
status = "disabled"; /* Conflict with isc. */
};
spi2: spi@400 {
@ -211,7 +216,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <16>;
status = "disabled";
status = "disabled"; /* Conflict with isc. */
};
};
@ -228,7 +233,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <32>;
status = "disabled";
status = "disabled"; /* Conflict with spi3 and i2c3. */
};
spi3: spi@400 {
@ -240,7 +245,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
atmel,fifo-size = <16>;
status = "okay";
status = "okay"; /* Conflict with uart6 and i2c3. */
};
i2c3: i2c@600 {
@ -255,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
status = "disabled";
status = "disabled"; /* Conflict with uart6 and spi3. */
};
};
@ -268,12 +273,6 @@
pinctrl@fc038000 {
pinctrl_can0_default: can0_default {
pinmux = <PIN_PC10__CANTX0>,
<PIN_PC11__CANRX0>;
bias-disable;
};
pinctrl_can1_default: can1_default {
pinmux = <PIN_PC26__CANTX1>,
<PIN_PC27__CANRX1>;
@ -350,7 +349,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
bias-pull-up;
bias-disable;
};
ck_cd_vddsel {
@ -368,7 +367,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
bias-pull-up;
bias-disable;
};
conf-ck_cd {
@ -512,6 +511,7 @@
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
wakeup-source;
};
};
@ -519,7 +519,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay";
status = "okay"; /* Conflict with pwm0. */
red {
label = "red";

47
sys/gnu/dts/arm/at91-sama5d2_xplained.dts
View File

@ -67,14 +67,14 @@
};
ahb {
usb0: gadget@00300000 {
usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00400000 {
usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
&pioA PIN_PB10 GPIO_ACTIVE_HIGH
@ -85,7 +85,7 @@
status = "okay";
};
usb2: ehci@00500000 {
usb2: ehci@500000 {
status = "okay";
};
@ -103,6 +103,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
vqmmc-supply = <&vdd_3v3_reg>;
vmmc-supply = <&vdd_3v3_reg>;
};
apb {
@ -160,14 +162,6 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
@ -220,11 +214,28 @@
regulator-always-on;
};
};
charger {
compatible = "active-semi,act8945a-charger";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
status = "okay";
};
};
};
pwm0: pwm@f802c000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
status = "disabled"; /* conflict with leds */
};
flx0: flexcom@f8034000 {
@ -449,7 +460,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
bias-pull-up;
bias-disable;
};
ck_cd_rstn_vddsel {
@ -468,7 +479,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
bias-pull-up;
bias-disable;
};
conf-ck_cd {
@ -508,6 +519,11 @@
bias-disable;
};
pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
pinmux = <PIN_PB5__PWMH2>,
<PIN_PB6__PWML2>;
bias-pull-up;
};
};
classd: classd@fc048000 {
@ -536,6 +552,7 @@
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
wakeup-source;
};
};
@ -543,7 +560,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay";
status = "okay"; /* conflict with pwm0 */
red {
label = "red";

6
sys/gnu/dts/arm/at91-sama5d3_xplained.dts
View File

@ -235,14 +235,14 @@
};
};
usb0: gadget@00500000 {
usb0: gadget@500000 {
atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00600000 {
usb1: ohci@600000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 3 GPIO_ACTIVE_LOW
@ -251,7 +251,7 @@
status = "okay";
};
usb2: ehci@00700000 {
usb2: ehci@700000 {
status = "okay";
};

6
sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts
View File

@ -21,14 +21,14 @@
};
ahb {
usb0: gadget@00400000 {
usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00500000 {
usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_LOW
@ -37,7 +37,7 @@
status = "okay";
};
usb2: ehci@00600000 {
usb2: ehci@600000 {
status = "okay";
};

6
sys/gnu/dts/arm/at91-sama5d4_xplained.dts
View File

@ -170,14 +170,14 @@
};
};
usb0: gadget@00400000 {
usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00500000 {
usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_HIGH
@ -186,7 +186,7 @@
status = "okay";
};
usb2: ehci@00600000 {
usb2: ehci@600000 {
status = "okay";
};

6
sys/gnu/dts/arm/at91-sama5d4ek.dts
View File

@ -216,14 +216,14 @@
};
};
usb0: gadget@00400000 {
usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00500000 {
usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
&pioE 11 GPIO_ACTIVE_LOW
@ -232,7 +232,7 @@
status = "okay";
};
usb2: ehci@00600000 {
usb2: ehci@600000 {
status = "okay";
};

1
sys/gnu/dts/arm/at91-tse850-3.dts
View File

@ -221,6 +221,7 @@
jc42@18 {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x18>;
smbus-timeout-disable;
};
dpot: mcp4651-104@28 {

6
sys/gnu/dts/arm/at91-vinco.dts
View File

@ -180,14 +180,14 @@
};
};
usb0: gadget@00400000 {
usb0: gadget@400000 {
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "disable";
};
usb1: ohci@00500000 {
usb1: ohci@500000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioE 11 GPIO_ACTIVE_LOW
@ -196,7 +196,7 @@
status = "disable";
};
usb2: ehci@00600000 {
usb2: ehci@600000 {
/* 4G Modem */
status = "okay";
};

4
sys/gnu/dts/arm/at91rm9200.dtsi
View File

@ -66,7 +66,7 @@
};
};
sram: sram@00200000 {
sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x4000>;
};
@ -938,7 +938,7 @@
status = "disabled";
};
usb0: ohci@00300000 {
usb0: ohci@300000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;

2
sys/gnu/dts/arm/at91rm9200ek.dts
View File

@ -78,7 +78,7 @@
};
};
usb0: ohci@00300000 {
usb0: ohci@300000 {
num-ports = <2>;
status = "okay";
};

2
sys/gnu/dts/arm/at91sam9260.dtsi
View File

@ -69,7 +69,7 @@
};
};
sram0: sram@002ff000 {
sram0: sram@2ff000 {
compatible = "mmio-sram";
reg = <0x002ff000 0x2000>;
};

4
sys/gnu/dts/arm/at91sam9261.dtsi
View File

@ -60,7 +60,7 @@
};
};
sram: sram@00300000 {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x28000>;
};
@ -71,7 +71,7 @@
#size-cells = <1>;
ranges;
usb0: ohci@00500000 {
usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;

2
sys/gnu/dts/arm/at91sam9261ek.dts
View File

@ -32,7 +32,7 @@
};
ahb {
usb0: ohci@00500000 {
usb0: ohci@500000 {
status = "okay";
};

6
sys/gnu/dts/arm/at91sam9263.dtsi
View File

@ -62,12 +62,12 @@
};
};
sram0: sram@00300000 {
sram0: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x14000>;
};
sram1: sram@00500000 {
sram1: sram@500000 {
compatible = "mmio-sram";
reg = <0x00500000 0x4000>;
};
@ -1010,7 +1010,7 @@
status = "disabled";
};
usb0: ohci@00a00000 {
usb0: ohci@a00000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;

2
sys/gnu/dts/arm/at91sam9263ek.dts
View File

@ -191,7 +191,7 @@
};
};
usb0: ohci@00a00000 {
usb0: ohci@a00000 {
num-ports = <2>;
status = "okay";
atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH

4
sys/gnu/dts/arm/at91sam9g20.dtsi
View File

@ -16,11 +16,11 @@
reg = <0x20000000 0x08000000>;
};
sram0: sram@002ff000 {
sram0: sram@2ff000 {
status = "disabled";
};
sram1: sram@002fc000 {
sram1: sram@2fc000 {
compatible = "mmio-sram";
reg = <0x002fc000 0x8000>;
};

6
sys/gnu/dts/arm/at91sam9g45.dtsi
View File

@ -74,7 +74,7 @@
};
};
sram: sram@00300000 {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
};
@ -1313,7 +1313,7 @@
status = "disabled";
};
usb0: ohci@00700000 {
usb0: ohci@700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@ -1322,7 +1322,7 @@
status = "disabled";
};
usb1: ehci@00800000 {
usb1: ehci@800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;

4
sys/gnu/dts/arm/at91sam9m10g45ek.dts
View File

@ -290,14 +290,14 @@
};
};
usb0: ohci@00700000 {
usb0: ohci@700000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
&pioD 3 GPIO_ACTIVE_LOW>;
};
usb1: ehci@00800000 {
usb1: ehci@800000 {
status = "okay";
};
};

4
sys/gnu/dts/arm/at91sam9n12.dtsi
View File

@ -64,7 +64,7 @@
};
};
sram: sram@00300000 {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
};
@ -1018,7 +1018,7 @@
};
};
usb0: ohci@00500000 {
usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;

2
sys/gnu/dts/arm/at91sam9n12ek.dts
View File

@ -169,7 +169,7 @@
};
};
usb0: ohci@00500000 {
usb0: ohci@500000 {
num-ports = <1>;
atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
status = "okay";

4
sys/gnu/dts/arm/at91sam9rl.dtsi
View File

@ -70,7 +70,7 @@
};
};
sram: sram@00300000 {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x10000>;
};
@ -81,7 +81,7 @@
#size-cells = <1>;
ranges;
fb0: fb@00500000 {
fb0: fb@500000 {
compatible = "atmel,at91sam9rl-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;

2
sys/gnu/dts/arm/at91sam9rlek.dts
View File

@ -32,7 +32,7 @@
};
ahb {
fb0: fb@00500000 {
fb0: fb@500000 {
display = <&display0>;
status = "okay";

10
sys/gnu/dts/arm/at91sam9x25ek.dts
View File

@ -16,6 +16,10 @@
ahb {
apb {
can1: can@f8004000 {
status = "okay";
};
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
@ -25,6 +29,12 @@
phy-mode = "rmii";
status = "okay";
};
pwm0: pwm@f8034000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
status = "okay";
};
};
};
};

6
sys/gnu/dts/arm/at91sam9x5.dtsi
View File

@ -72,7 +72,7 @@
};
};
sram: sram@00300000 {
sram: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x8000>;
};
@ -1231,7 +1231,7 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@ -1240,7 +1240,7 @@
status = "disabled";
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;

6
sys/gnu/dts/arm/at91sam9x5ek.dtsi
View File

@ -50,6 +50,8 @@
};
usart0: serial@f801c000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "okay";
};
@ -134,7 +136,7 @@
};
};
usb0: ohci@00600000 {
usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
@ -143,7 +145,7 @@
>;
};
usb1: ehci@00700000 {
usb1: ehci@700000 {
status = "okay";
};
};

4
sys/gnu/dts/arm/at91sam9xe.dtsi
View File

@ -49,11 +49,11 @@
model = "Atmel AT91SAM9XE family SoC";
compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
sram0: sram@002ff000 {
sram0: sram@2ff000 {
status = "disabled";
};
sram1: sram@00300000 {
sram1: sram@300000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
};

2
sys/gnu/dts/arm/axp209.dtsi
View File

@ -107,7 +107,7 @@
};
};
usb_power_supply: usb_power_supply {
usb_power_supply: usb-power-supply {
compatible = "x-powers,axp202-usb-power-supply";
status = "disabled";
};

139
sys/gnu/dts/arm/axp81x.dtsi Normal file
View File

@ -0,0 +1,139 @@
/*
* Copyright 2017 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* AXP813/818 Integrated Power Management Chip */
&axp81x {
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
reg_dcdc1: dcdc1 {
};
reg_dcdc2: dcdc2 {
};
reg_dcdc3: dcdc3 {
};
reg_dcdc4: dcdc4 {
};
reg_dcdc5: dcdc5 {
};
reg_dcdc6: dcdc6 {
};
reg_dcdc7: dcdc7 {
};
reg_aldo1: aldo1 {
};
reg_aldo2: aldo2 {
};
reg_aldo3: aldo3 {
};
reg_dldo1: dldo1 {
};
reg_dldo2: dldo2 {
};
reg_dldo3: dldo3 {
};
reg_dldo4: dldo4 {
};
reg_eldo1: eldo1 {
};
reg_eldo2: eldo2 {
};
reg_eldo3: eldo3 {
};
reg_fldo1: fldo1 {
};
reg_fldo2: fldo2 {
};
reg_fldo3: fldo3 {
};
reg_ldo_io0: ldo-io0 {
/* Disable by default to avoid conflicts with GPIO */
status = "disabled";
};
reg_ldo_io1: ldo-io1 {
/* Disable by default to avoid conflicts with GPIO */
status = "disabled";
};
reg_rtc_ldo: rtc-ldo {
/* RTC_LDO is a fixed, always-on regulator */
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_sw: sw {
};
reg_drivevbus: drivevbus {
status = "disabled";
};
};
};

28
sys/gnu/dts/arm/bcm-cygnus.dtsi
View File

@ -96,14 +96,14 @@
#address-cells = <1>;
#size-cells = <1>;
otp: otp@0301c800 {
otp: otp@301c800 {
compatible = "brcm,ocotp";
reg = <0x0301c800 0x2c>;
brcm,ocotp-size = <2048>;
status = "disabled";
};
pcie_phy: phy@0301d0a0 {
pcie_phy: phy@301d0a0 {
compatible = "brcm,cygnus-pcie-phy";
reg = <0x0301d0a0 0x14>;
#address-cells = <1>;
@ -120,7 +120,7 @@
};
};
pinctrl: pinctrl@0301d0c8 {
pinctrl: pinctrl@301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
@ -141,7 +141,7 @@
};
};
mailbox: mailbox@03024024 {
mailbox: mailbox@3024024 {
compatible = "brcm,iproc-mailbox";
reg = <0x03024024 0x40>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@ -150,7 +150,7 @@
#mbox-cells = <1>;
};
gpio_crmu: gpio@03024800 {
gpio_crmu: gpio@3024800 {
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
@ -473,6 +473,16 @@
status = "disabled";
};
clcd: clcd@180a0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x180a0000 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "combined";
clocks = <&axi41_clk>, <&apb_clk>;
clock-names = "clcdclk", "apb_pclk";
status = "disabled";
};
v3d: v3d@180a2000 {
compatible = "brcm,cygnus-v3d";
reg = <0x180a2000 0x1000>;
@ -575,6 +585,14 @@
status = "disabled";
};
pwm: pwm@180aa500 {
compatible = "brcm,kona-pwm";
reg = <0x180aa500 0xc4>;
#pwm-cells = <3>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
status = "disabled";
};
keypad: keypad@180ac000 {
compatible = "brcm,bcm-keypad";
reg = <0x180ac000 0x14c>;

368
sys/gnu/dts/arm/bcm-hr2.dtsi Normal file
View File

@ -0,0 +1,368 @@
/*
* BSD LICENSE
*
* Copyright(c) 2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "brcm,hr2";
model = "Broadcom Hurricane 2 SoC";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>;
};
mpcore@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,hr2-armpll";
clocks = <&osc>;
reg = <0x0 0x1000>;
};
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
twd-timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&periph_clk>;
};
twd-watchdog@20620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x20620 0x20>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&periph_clk>;
};
gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x21000 0x1000>,
<0x20100 0x100>;
};
L2: l2-cache@22000 {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
cache-level = <2>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
periph_clk: periph_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&a9pll>;
clock-div = <2>;
clock-mult = <1>;
};
};
axi@18000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x0011c40c>;
#address-cells = <1>;
#size-cells = <1>;
uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc>;
status = "disabled";
};
uart1: serial@400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc>;
status = "disabled";
};
dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
status = "disabled";
};
amac0: ethernet@22000 {
compatible = "brcm,nsp-amac";
reg = <0x22000 0x1000>,
<0x110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x26000 0x600>,
<0x11b408 0x600>,
<0x026f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
gpiob: gpio@30000 {
compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
reg = <0x30000 0x50>;
#gpio-cells = <2>;
gpio-controller;
ngpios = <4>;
interrupt-controller;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@31000 {
compatible = "brcm,iproc-pwm";
reg = <0x31000 0x28>;
clocks = <&osc>;
#pwm-cells = <3>;
status = "disabled";
};
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
};
qspi: qspi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,
<0x0273a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs",
"intr_status_reg";
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
"spi_lr_overhead",
"mspi_done",
"mspi_halted";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
/* partitions defined in board DTS */
};
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
ccbtimer1: timer@35000 {
compatible = "arm,sp804";
reg = <0x35000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
};
i2c0: i2c@38000 {
compatible = "brcm,iproc-i2c";
reg = <0x38000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
};
watchdog@39000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x39000 0x1000>;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
};
i2c1: i2c@3b000 {
compatible = "brcm,iproc-i2c";
reg = <0x3b000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
};
};
pflash: nor@20000000 {
compatible = "cfi-flash", "jedec-flash";
reg = <0x20000000 0x04000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
/* partitions defined in board DTS */
};
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
status = "disabled";
msi-parent = <&msi0>;
msi0: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
<GIC_SPI 183 IRQ_TYPE_NONE>,
<GIC_SPI 184 IRQ_TYPE_NONE>,
<GIC_SPI 185 IRQ_TYPE_NONE>;
brcm,pcie-msi-inten;
};
};
pcie1: pcie@18013000 {
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
status = "disabled";
msi-parent = <&msi1>;
msi1: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
<GIC_SPI 189 IRQ_TYPE_NONE>,
<GIC_SPI 190 IRQ_TYPE_NONE>,
<GIC_SPI 191 IRQ_TYPE_NONE>;
brcm,pcie-msi-inten;
};
};
};

12
sys/gnu/dts/arm/bcm-nsp.dtsi
View File

@ -75,7 +75,7 @@
#address-cells = <1>;
#size-cells = <1>;
a9pll: arm_clk@00000 {
a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
clocks = <&osc>;
@ -85,7 +85,7 @@
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
@ -93,7 +93,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
@ -164,7 +164,7 @@
#address-cells = <1>;
#size-cells = <1>;
gpioa: gpio@0020 {
gpioa: gpio@20 {
compatible = "brcm,nsp-gpio-a";
reg = <0x0020 0x70>,
<0x3f1c4 0x1c>;
@ -176,7 +176,7 @@
gpio-ranges = <&pinctrl 0 0 32>;
};
uart0: serial@0300 {
uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@ -184,7 +184,7 @@
status = "disabled";
};
uart1: serial@0400 {
uart1: serial@400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;

5
sys/gnu/dts/arm/bcm2837-rpi-3-b.dts
View File

@ -30,6 +30,11 @@
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <2000000>;
};
};
/* uart1 is mapped to the pin header */

1
sys/gnu/dts/arm/bcm283x.dtsi
View File

@ -639,5 +639,6 @@
usbphy: phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};

3
sys/gnu/dts/arm/bcm47081-luxul-xwr-1200.dts
View File

@ -57,7 +57,8 @@
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "none";
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
status {

63
sys/gnu/dts/arm/bcm47094-luxul-abr-4500.dts Normal file
View File

@ -0,0 +1,63 @@
/*
* Copyright (C) 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm4708.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
model = "Luxul ABR-4500 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
leds {
compatible = "gpio-leds";
status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
};
};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
&spi_nor {
status = "okay";
};

63
sys/gnu/dts/arm/bcm47094-luxul-xbr-4500.dts Normal file
View File

@ -0,0 +1,63 @@
/*
* Copyright (C) 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm4708.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
model = "Luxul XBR-4500 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
leds {
compatible = "gpio-leds";
status {
label = "bcm53xx:green:status";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
};
};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
&spi_nor {
status = "okay";
};

50
sys/gnu/dts/arm/bcm47189-luxul-xap-1440.dts Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm53573.dtsi"
/ {
compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
model = "Luxul XAP-1440 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
wlan {
label = "bcm53xx:blue:wlan";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
system {
label = "bcm53xx:green:system";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};

87
sys/gnu/dts/arm/bcm47189-luxul-xap-810.dts Normal file
View File

@ -0,0 +1,87 @@
/*
* Copyright 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm53573.dtsi"
/ {
compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
model = "Luxul XAP-810 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
system {
label = "bcm53xx:green:system";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
pcie0_leds {
compatible = "gpio-leds";
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
ranges = <0x00000000 0 0 0 0 0x00100000>;
#address-cells = <3>;
#size-cells = <2>;
bridge@0,0,0 {
reg = <0x0000 0 0 0 0>;
ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
#address-cells = <3>;
#size-cells = <2>;
wifi@0,1,0 {
reg = <0x0000 0 0 0 0>;
ranges = <0x00000000 0 0 0 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
pcie0_chipcommon: chipcommon@0 {
reg = <0 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
};

6
sys/gnu/dts/arm/bcm5301x.dtsi
View File

@ -24,7 +24,7 @@
#address-cells = <1>;
#size-cells = <1>;
uart0: serial@0300 {
uart0: serial@300 {
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@ -32,7 +32,7 @@
status = "disabled";
};
uart1: serial@0400 {
uart1: serial@400 {
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@ -47,7 +47,7 @@
#address-cells = <1>;
#size-cells = <1>;
a9pll: arm_clk@00000 {
a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
clocks = <&osc>;

85
sys/gnu/dts/arm/bcm53340-ubnt-unifi-switch8.dts Normal file
View File

@ -0,0 +1,85 @@
/*
* DTS for Unifi Switch 8 port
*
* Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
#include "bcm-hr2.dtsi"
/ {
compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
model = "Ubiquiti UniFi Switch 8 (BCM53342)";
/* Hurricane 2 designs use the second UART */
chosen {
bootargs = "console=ttyS1,115200 earlyprintk";
};
memory@0 {
reg = <0x00000000 0x08000000>,
<0x68000000 0x08000000>;
};
};
&uart1 {
status = "okay";
};
&qspi {
status = "okay";
bspi-sel = <0>;
flash: m25p80@0 {
compatible = "m25p80";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <12500000>;
spi-cpol;
spi-cpha;
partition@0 {
label = "u-boot";
reg = <0x0 0xc0000>;
};
partition@c0000 {
label = "u-boot-env";
reg = <0xc0000 0x10000>;
};
partition@d0000 {
label = "shmoo";
reg = <0xd0000 0x10000>;
};
partition@e0000 {
label = "kernel0";
reg = <0xe0000 0xf00000>;
};
partition@fe0000 {
label = "kernel1";
reg = <0xfe0000 0xf10000>;
};
partition@1ef0000 {
label = "cfg";
reg = <0x1ef0000 0x100000>;
};
partition@1ff0000 {
label = "EEPROM";
reg = <0x1ff0000 0x10000>;
};
};
};
&pcie0 {
/* Attaches to the internal switch */
status = "okay";
};

2
sys/gnu/dts/arm/bcm53573.dtsi
View File

@ -107,7 +107,7 @@
gpio-controller;
#gpio-cells = <2>;
uart0: serial@0300 {
uart0: serial@300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupt-parent = <&gic>;

4
sys/gnu/dts/arm/bcm958623hr.dts
View File

@ -141,10 +141,6 @@
status = "okay";
};
&sata {
status = "okay";
};
&qspi {
bspi-sel = <0>;
flash: m25p80@0 {

4
sys/gnu/dts/arm/bcm958625hr.dts
View File

@ -177,10 +177,6 @@
status = "okay";
};
&sata {
status = "okay";
};
&srab {
compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
status = "okay";

6
sys/gnu/dts/arm/berlin2.dtsi
View File

@ -202,7 +202,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
gpio0: gpio@0400 {
gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@ -220,7 +220,7 @@
};
};
gpio1: gpio@0800 {
gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@ -238,7 +238,7 @@
};
};
gpio2: gpio@0c00 {
gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;

6
sys/gnu/dts/arm/berlin2cd.dtsi
View File

@ -182,7 +182,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
gpio0: gpio@0400 {
gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@ -200,7 +200,7 @@
};
};
gpio1: gpio@0800 {
gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@ -218,7 +218,7 @@
};
};
gpio2: gpio@0c00 {
gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;

6
sys/gnu/dts/arm/berlin2q.dtsi
View File

@ -234,7 +234,7 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
gpio0: gpio@0400 {
gpio0: gpio@400 {
compatible = "snps,dw-apb-gpio";
reg = <0x0400 0x400>;
#address-cells = <1>;
@ -252,7 +252,7 @@
};
};
gpio1: gpio@0800 {
gpio1: gpio@800 {
compatible = "snps,dw-apb-gpio";
reg = <0x0800 0x400>;
#address-cells = <1>;
@ -270,7 +270,7 @@
};
};
gpio2: gpio@0c00 {
gpio2: gpio@c00 {
compatible = "snps,dw-apb-gpio";
reg = <0x0c00 0x400>;
#address-cells = <1>;

22
sys/gnu/dts/arm/da850-lcdk.dts
View File

@ -26,6 +26,19 @@
reg = <0xc0000000 0x08000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
dsp_memory_region: dsp-memory@c3000000 {
compatible = "shared-dma-pool";
reg = <0xc3000000 0x1000000>;
reusable;
status = "okay";
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 LCDK";
@ -280,12 +293,12 @@
label = "u-boot env";
reg = <0 0x020000>;
};
partition@0x020000 {
partition@20000 {
/* The LCDK defaults to booting from this partition */
label = "u-boot";
reg = <0x020000 0x080000>;
};
partition@0x0a0000 {
partition@a0000 {
label = "free space";
reg = <0x0a0000 0>;
};
@ -319,3 +332,8 @@
pinctrl-0 = <&vpif_capture_pins>;
status = "okay";
};
&dsp {
memory-region = <&dsp_memory_region>;
status = "okay";
};

4
sys/gnu/dts/arm/da850-lego-ev3.dts
View File

@ -178,7 +178,7 @@
*/
battery {
pinctrl-names = "default";
pintctrl-0 = <&battery_pins>;
pinctrl-0 = <&battery_pins>;
compatible = "lego,ev3-battery";
io-channels = <&adc 4>, <&adc 3>;
io-channel-names = "voltage", "current";
@ -392,7 +392,7 @@
batt_volt_en {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-low;
output-high;
};
};

12
sys/gnu/dts/arm/da850.dtsi
View File

@ -23,6 +23,18 @@
reg = <0xfffee000 0x2000>;
};
};
dsp: dsp@11800000 {
compatible = "ti,da850-dsp";
reg = <0x11800000 0x40000>,
<0x11e00000 0x8000>,
<0x11f00000 0x8000>,
<0x01c14044 0x4>,
<0x01c14174 0x8>;
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
interrupt-parent = <&intc>;
interrupts = <28>;
status = "disabled";
};
soc@1c00000 {
compatible = "simple-bus";
model = "da850";

2
sys/gnu/dts/arm/dm814x.dtsi
View File

@ -75,6 +75,7 @@
reg = <0x47401300 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb0: usb@47401000 {
@ -385,6 +386,7 @@
reg = <0x1b00 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
};

14
sys/gnu/dts/arm/dove.dtsi
View File

@ -457,25 +457,25 @@
};
};
thermal: thermal-diode@001c {
thermal: thermal-diode@1c {
compatible = "marvell,dove-thermal";
reg = <0x001c 0x0c>, <0x005c 0x08>;
};
gate_clk: clock-gating-ctrl@0038 {
gate_clk: clock-gating-ctrl@38 {
compatible = "marvell,dove-gating-clock";
reg = <0x0038 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
divider_clk: core-clock@0064 {
divider_clk: core-clock@64 {
compatible = "marvell,dove-divider-clock";
reg = <0x0064 0x8>;
#clock-cells = <1>;
};
pinctrl: pin-ctrl@0200 {
pinctrl: pin-ctrl@200 {
compatible = "marvell,dove-pinctrl";
reg = <0x0200 0x14>,
<0x0440 0x04>;
@ -719,13 +719,13 @@
};
};
core_clk: core-clocks@0214 {
core_clk: core-clocks@214 {
compatible = "marvell,dove-core-clock";
reg = <0x0214 0x4>;
#clock-cells = <1>;
};
gpio0: gpio-ctrl@0400 {
gpio0: gpio-ctrl@400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
@ -737,7 +737,7 @@
interrupts = <12>, <13>, <14>, <60>;
};
gpio1: gpio-ctrl@0420 {
gpio1: gpio-ctrl@420 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;

4
sys/gnu/dts/arm/dra7-evm-common.dtsi
View File

@ -256,3 +256,7 @@
status = "okay";
};
};
&pcie1_rc {
status = "okay";
};

4
sys/gnu/dts/arm/dra7-evm.dts
View File

@ -497,7 +497,3 @@
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
&pcie1_rc {
status = "okay";
};

36
sys/gnu/dts/arm/dra7.dtsi
View File

@ -170,7 +170,7 @@
pbias_mmc_reg: pbias_mmc_omap5 {
regulator-name = "pbias_mmc_omap5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
};
@ -457,6 +457,7 @@
#dma-cells = <1>;
dma-channels = <32>;
dma-requests = <127>;
ti,hwmods = "dma_system";
};
edma: edma@43300000 {
@ -1069,6 +1070,13 @@
max-frequency = <192000000>;
};
hdqw1w: 1w@480b2000 {
compatible = "ti,omap3-1w";
reg = <0x480b2000 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "hdq1w";
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
@ -1489,6 +1497,32 @@
};
};
target-module@4a0dd000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_core";
reg = <0x4a0dd000 0x4>,
<0x4a0dd008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0dd000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
target-module@4a0d9000 {
compatible = "ti,sysc-omap4-sr";
ti,hwmods = "smartreflex_mpu";
reg = <0x4a0d9000 0x4>,
<0x4a0d9008 0x4>;
reg-names = "rev", "sysc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4a0d9000 0x001000>;
/* SmartReflex child device marked reserved in TRM */
};
omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";

2
sys/gnu/dts/arm/ep7211-edb7211.dts
View File

@ -75,7 +75,7 @@
};
&bus {
flash: nor@00000000 {
flash: nor@0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;

2
sys/gnu/dts/arm/exynos3250-artik5.dtsi
View File

@ -29,7 +29,7 @@
reg = <0x40000000 0x1ff00000>;
};
firmware@0205f000 {
firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205f000 0x1000>;
};

2
sys/gnu/dts/arm/exynos3250-monk.dts
View File

@ -32,7 +32,7 @@
reg = <0x40000000 0x1ff00000>;
};
firmware@0205F000 {
firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205F000 0x1000>;
};

24
sys/gnu/dts/arm/exynos3250-rinato.dts
View File

@ -32,7 +32,7 @@
reg = <0x40000000 0x1ff00000>;
};
firmware@0205F000 {
firmware@205f000 {
compatible = "samsung,secure-firmware";
reg = <0x0205F000 0x1000>;
};
@ -227,28 +227,6 @@
vci-supply = <&ldo20_reg>;
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
init-delay = <100>;
flip-horizontal;
flip-vertical;
panel-width-mm = <29>;
panel-height-mm = <29>;
display-timings {
timing-0 {
clock-frequency = <4600000>;
hactive = <320>;
vactive = <320>;
hfront-porch = <1>;
hback-porch = <1>;
hsync-len = <1>;
vfront-porch = <150>;
vback-porch = <1>;
vsync-len = <2>;
};
};
};
};

2
sys/gnu/dts/arm/exynos3250.dtsi
View File

@ -122,7 +122,7 @@
};
};
sysram@02020000 {
sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
#address-cells = <1>;

4
sys/gnu/dts/arm/exynos4.dtsi
View File

@ -55,7 +55,7 @@
serial3 = &serial_3;
};
clock_audss: clock-controller@03810000 {
clock_audss: clock-controller@3810000 {
compatible = "samsung,exynos4210-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
@ -64,7 +64,7 @@
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
i2s0: i2s@03830000 {
i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,

2
sys/gnu/dts/arm/exynos4210-pinctrl.dtsi
View File

@ -843,7 +843,7 @@
};
};
pinctrl@03860000 {
pinctrl@3860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;

2
sys/gnu/dts/arm/exynos4210-universal_c210.dts
View File

@ -31,7 +31,7 @@
stdout-path = &serial_2;
};
sysram@02020000 {
sysram@2020000 {
smp-sysram@0 {
status = "disabled";
};

4
sys/gnu/dts/arm/exynos4210.dtsi
View File

@ -64,7 +64,7 @@
};
};
sysram: sysram@02020000 {
sysram: sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
#address-cells = <1>;
@ -151,7 +151,7 @@
};
};
pinctrl_2: pinctrl@03860000 {
pinctrl_2: pinctrl@3860000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x03860000 0x1000>;
};

2
sys/gnu/dts/arm/exynos4412-itop-scp-core.dtsi
View File

@ -26,7 +26,7 @@
reg = <0x40000000 0x40000000>;
};
firmware@0203F000 {
firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};

8
sys/gnu/dts/arm/exynos4412-odroid-common.dtsi
View File

@ -20,7 +20,7 @@
stdout-path = &serial_1;
};
firmware@0204F000 {
firmware@204f000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
@ -31,8 +31,6 @@
pinctrl-0 = <&gpio_power_key>;
power_key {
interrupt-parent = <&gpx1>;
interrupts = <3 IRQ_TYPE_NONE>;
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@ -253,7 +251,7 @@
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
usb3503: usb3503@08 {
usb3503: usb3503@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@ -263,7 +261,7 @@
initial-mode = <1>;
};
max77686: pmic@09 {
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;

2
sys/gnu/dts/arm/exynos4412-odroidx.dts
View File

@ -43,8 +43,6 @@
pinctrl-0 = <&gpio_power_key &gpio_home_key>;
home_key {
interrupt-parent = <&gpx2>;
interrupts = <2 IRQ_TYPE_NONE>;
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_HOME>;
label = "home key";

2
sys/gnu/dts/arm/exynos4412-origen.dts
View File

@ -32,7 +32,7 @@
stdout-path = &serial_2;
};
firmware@0203F000 {
firmware@203f000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};

2
sys/gnu/dts/arm/exynos4412-pinctrl.dtsi
View File

@ -899,7 +899,7 @@
};
};
pinctrl_2: pinctrl@03860000 {
pinctrl_2: pinctrl@3860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;

117
sys/gnu/dts/arm/exynos4412-trats2.dts
View File

@ -18,6 +18,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include <dt-bindings/pinctrl/samsung.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
@ -40,7 +41,7 @@
stdout-path = &serial_2;
};
firmware@0204F000 {
firmware@204f000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
@ -97,6 +98,34 @@
gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vsil12: voltage-regulator-6 {
compatible = "regulator-fixed";
regulator-name = "VSIL_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&buck7_reg>;
};
vcc33mhl: voltage-regulator-7 {
compatible = "regulator-fixed";
regulator-name = "VCC_3.3_MHL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc18mhl: voltage-regulator-8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1.8_MHL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
gpio-keys {
@ -206,7 +235,7 @@
#size-cells = <0>;
status = "okay";
ak8975@0c {
ak8975@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@ -229,6 +258,36 @@
};
};
i2c-mhl {
compatible = "i2c-gpio";
gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&i2c_mhl_bus>;
pinctrl-names = "default";
status = "okay";
sii9234: hdmi-bridge@39 {
compatible = "sil,sii9234";
avcc33-supply = <&vcc33mhl>;
iovcc18-supply = <&vcc18mhl>;
avcc12-supply = <&vsil12>;
cvcc12-supply = <&vsil12>;
reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpf3>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x39>;
port {
mhl_to_hdmi: endpoint {
remote-endpoint = <&hdmi_to_mhl>;
};
};
};
};
camera: camera {
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
@ -501,6 +560,29 @@
status = "okay";
};
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo3_reg>;
vdd_osc-supply = <&ldo4_reg>;
vdd_pll-supply = <&ldo3_reg>;
ddc = <&i2c_5>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
hdmi_to_mhl: endpoint {
remote-endpoint = <&mhl_to_hdmi>;
};
};
};
};
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
@ -579,6 +661,10 @@
};
};
&i2c_5 {
status = "okay";
};
&i2c_7 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@ -587,7 +673,7 @@
pinctrl-names = "default";
status = "okay";
max77686: max77686_pmic@09 {
max77686: max77686_pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@ -873,12 +959,20 @@
};
};
&i2c_8 {
status = "okay";
};
&i2s0 {
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
};
&mixer {
status = "okay";
};
&mshc_0 {
broken-cd;
non-removable;
@ -904,6 +998,18 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
mhl_int: mhl-int {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
i2c_mhl_bus: i2c-mhl-bus {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sleep0: sleep-states {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
@ -1007,6 +1113,11 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
sleep1: sleep-states {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);

2
sys/gnu/dts/arm/exynos4412.dtsi
View File

@ -150,7 +150,7 @@
};
};
sysram@02020000 {
sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
#address-cells = <1>;

22
sys/gnu/dts/arm/exynos5250-arndale.dts
View File

@ -152,6 +152,8 @@
};
&hdmi {
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
@ -455,15 +457,9 @@
&i2c_2 {
status = "okay";
/* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x50>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_3 {
@ -489,15 +485,9 @@
&i2c_8 {
status = "okay";
/* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x38>;
hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&i2c_9 {
@ -516,6 +506,10 @@
status = "okay";
};
&mixer {
status = "okay";
};
&mmc_0 {
status = "okay";
broken-cd;

20
sys/gnu/dts/arm/exynos5250-smdk5250.dts
View File

@ -116,6 +116,8 @@
};
&hdmi {
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
};
@ -129,7 +131,7 @@
reg = <0x50>;
};
max77686@09 {
max77686@9 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
@ -308,24 +310,16 @@
&i2c_2 {
status = "okay";
/* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_8 {
status = "okay";
/* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&i2c_9 {
@ -344,6 +338,10 @@
status = "okay";
};
&mixer {
status = "okay";
};
&mmc_0 {
status = "okay";
broken-cd;

20
sys/gnu/dts/arm/exynos5250-snow-common.dtsi
View File

@ -261,10 +261,10 @@
};
&hdmi {
status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
@ -281,7 +281,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
max77686: max77686@09 {
max77686: max77686@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
@ -450,13 +450,9 @@
&i2c_2 {
status = "okay";
/* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_3 {
@ -514,19 +510,19 @@
&i2c_8 {
status = "okay";
/* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&i2s0 {
status = "okay";
};
&mixer {
status = "okay";
};
/* eMMC flash */
&mmc_0 {
status = "okay";

18
sys/gnu/dts/arm/exynos5250-spring.dts
View File

@ -91,10 +91,10 @@
};
&hdmi {
status = "okay";
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
hdmi-en-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
@ -362,13 +362,9 @@
&i2c_2 {
status = "okay";
/* used by HDMI DDC */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
};
};
&i2c_3 {
@ -412,19 +408,19 @@
&i2c_8 {
status = "okay";
/* used by HDMI PHY */
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
&i2s0 {
status = "okay";
};
&mixer {
status = "okay";
};
&mmc_0 {
status = "okay";
broken-cd;

24
sys/gnu/dts/arm/exynos5250.dtsi
View File

@ -93,7 +93,7 @@
};
soc: soc {
sysram@02020000 {
sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x30000>;
#address-cells = <1>;
@ -219,7 +219,7 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
pinctrl_3: pinctrl@3860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@ -367,6 +367,11 @@
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
};
i2c_9: i2c@121D0000 {
@ -475,7 +480,7 @@
status = "disabled";
};
i2s0: i2s@03830000 {
i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
status = "disabled";
reg = <0x03830000 0x100>;
@ -637,7 +642,7 @@
};
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@ -647,7 +652,7 @@
};
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@ -657,7 +662,7 @@
};
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@ -667,7 +672,7 @@
};
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
@ -687,6 +692,8 @@
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
samsung,syscon-phandle = <&pmu_system_controller>;
phy = <&hdmiphy>;
status = "disabled";
};
hdmicec: cec@101B0000 {
@ -702,7 +709,7 @@
status = "disabled";
};
mixer@14450000 {
mixer: mixer@14450000 {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
@ -711,6 +718,7 @@
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
iommus = <&sysmmu_tv>;
status = "disabled";
};
dp_phy: video-phy {

6
sys/gnu/dts/arm/exynos5410-odroidxu.dts
View File

@ -54,7 +54,7 @@
#clock-cells = <0>;
};
firmware@02073000 {
firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
@ -164,7 +164,7 @@
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
usb3503: usb-hub@08 {
usb3503: usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@ -178,7 +178,7 @@
refclk-frequency = <24000000>;
};
max77802: pmic@09 {
max77802: pmic@9 {
compatible = "maxim,max77802";
reg = <0x9>;
interrupt-parent = <&gpx0>;

2
sys/gnu/dts/arm/exynos5410-smdk5410.dts
View File

@ -32,7 +32,7 @@
#clock-cells = <0>;
};
firmware@02037000 {
firmware@2037000 {
compatible = "samsung,secure-firmware";
reg = <0x02037000 0x1000>;
};

4
sys/gnu/dts/arm/exynos5410.dtsi
View File

@ -187,7 +187,7 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
pinctrl_3: pinctrl@3860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@ -223,7 +223,7 @@
};
};
audi2s0: i2s@03830000 {
audi2s0: i2s@3830000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10

6
sys/gnu/dts/arm/exynos5420-arndale-octa.dts
View File

@ -30,7 +30,7 @@
bootargs = "console=ttySAC3,115200";
};
firmware@02073000 {
firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
@ -360,6 +360,10 @@
status = "okay";
};
&mixer {
status = "okay";
};
&mmc_0 {
status = "okay";
broken-cd;

Some files were not shown because too many files have changed in this diff Show More