Add SIOCGI2C ioctl support to the driver. Would work only on ConnectX-3
with fresh firmware. The low level code is based on code provided by Mellanox. Thanks to Mellanox and their distributor Must (http://mustcompany.ru) for providing hardware. In collaboration with: Andre Melkoumian <andre mellanox.com> Reviewed by: hselasky Sponsored by: Netflix Sponsored by: Nginx, Inc.
This commit is contained in:
parent
e8d89b8442
commit
dfd828e931
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=283612
@ -1967,6 +1967,29 @@ static int mlx4_en_ioctl(struct ifnet *dev, u_long command, caddr_t data)
|
||||
mutex_unlock(&mdev->state_lock);
|
||||
VLAN_CAPABILITIES(dev);
|
||||
break;
|
||||
case SIOCGI2C: {
|
||||
struct ifi2creq i2c;
|
||||
|
||||
error = copyin(ifr->ifr_data, &i2c, sizeof(i2c));
|
||||
if (error)
|
||||
break;
|
||||
if (i2c.len > sizeof(i2c.data)) {
|
||||
error = EINVAL;
|
||||
break;
|
||||
}
|
||||
/*
|
||||
* Note that we ignore i2c.addr here. The driver hardcodes
|
||||
* the address to 0x50, while standard expects it to be 0xA0.
|
||||
*/
|
||||
error = mlx4_get_module_info(mdev->dev, priv->port,
|
||||
i2c.offset, i2c.len, i2c.data);
|
||||
if (error < 0) {
|
||||
error = -error;
|
||||
break;
|
||||
}
|
||||
error = copyout(&i2c, ifr->ifr_data, sizeof(i2c));
|
||||
break;
|
||||
}
|
||||
default:
|
||||
error = ether_ioctl(dev, command, data);
|
||||
break;
|
||||
|
@ -1058,3 +1058,160 @@ int mlx4_get_roce_gid_from_slave(struct mlx4_dev *dev, int port, int slave_id, u
|
||||
}
|
||||
EXPORT_SYMBOL(mlx4_get_roce_gid_from_slave);
|
||||
|
||||
/* Cable Module Info */
|
||||
#define MODULE_INFO_MAX_READ 48
|
||||
|
||||
#define I2C_ADDR_LOW 0x50
|
||||
#define I2C_ADDR_HIGH 0x51
|
||||
#define I2C_PAGE_SIZE 256
|
||||
|
||||
/* Module Info Data */
|
||||
struct mlx4_cable_info {
|
||||
u8 i2c_addr;
|
||||
u8 page_num;
|
||||
__be16 dev_mem_address;
|
||||
__be16 reserved1;
|
||||
__be16 size;
|
||||
__be32 reserved2[2];
|
||||
u8 data[MODULE_INFO_MAX_READ];
|
||||
};
|
||||
|
||||
enum cable_info_err {
|
||||
CABLE_INF_INV_PORT = 0x1,
|
||||
CABLE_INF_OP_NOSUP = 0x2,
|
||||
CABLE_INF_NOT_CONN = 0x3,
|
||||
CABLE_INF_NO_EEPRM = 0x4,
|
||||
CABLE_INF_PAGE_ERR = 0x5,
|
||||
CABLE_INF_INV_ADDR = 0x6,
|
||||
CABLE_INF_I2C_ADDR = 0x7,
|
||||
CABLE_INF_QSFP_VIO = 0x8,
|
||||
CABLE_INF_I2C_BUSY = 0x9,
|
||||
};
|
||||
|
||||
#define MAD_STATUS_2_CABLE_ERR(mad_status) ((mad_status >> 8) & 0xFF)
|
||||
|
||||
#ifdef DEBUG
|
||||
static inline const char *cable_info_mad_err_str(u16 mad_status)
|
||||
{
|
||||
u8 err = MAD_STATUS_2_CABLE_ERR(mad_status);
|
||||
|
||||
switch (err) {
|
||||
case CABLE_INF_INV_PORT:
|
||||
return "invalid port selected";
|
||||
case CABLE_INF_OP_NOSUP:
|
||||
return "operation not supported for this port (the port is of type CX4 or internal)";
|
||||
case CABLE_INF_NOT_CONN:
|
||||
return "cable is not connected";
|
||||
case CABLE_INF_NO_EEPRM:
|
||||
return "the connected cable has no EPROM (passive copper cable)";
|
||||
case CABLE_INF_PAGE_ERR:
|
||||
return "page number is greater than 15";
|
||||
case CABLE_INF_INV_ADDR:
|
||||
return "invalid device_address or size (that is, size equals 0 or address+size is greater than 256)";
|
||||
case CABLE_INF_I2C_ADDR:
|
||||
return "invalid I2C slave address";
|
||||
case CABLE_INF_QSFP_VIO:
|
||||
return "at least one cable violates the QSFP specification and ignores the modsel signal";
|
||||
case CABLE_INF_I2C_BUSY:
|
||||
return "I2C bus is constantly busy";
|
||||
}
|
||||
return "Unknown Error";
|
||||
}
|
||||
#endif /* DEBUG */
|
||||
|
||||
/**
|
||||
* mlx4_get_module_info - Read cable module eeprom data
|
||||
* @dev: mlx4_dev.
|
||||
* @port: port number.
|
||||
* @offset: byte offset in eeprom to start reading data from.
|
||||
* @size: num of bytes to read.
|
||||
* @data: output buffer to put the requested data into.
|
||||
*
|
||||
* Reads cable module eeprom data, puts the outcome data into
|
||||
* data pointer paramer.
|
||||
* Returns num of read bytes on success or a negative error
|
||||
* code.
|
||||
*/
|
||||
int mlx4_get_module_info(struct mlx4_dev *dev, u8 port, u16 offset,
|
||||
u16 size, u8 *data)
|
||||
{
|
||||
struct mlx4_cmd_mailbox *inbox, *outbox;
|
||||
struct mlx4_mad_ifc *inmad, *outmad;
|
||||
struct mlx4_cable_info *cable_info;
|
||||
u16 i2c_addr;
|
||||
int ret;
|
||||
|
||||
if (size > MODULE_INFO_MAX_READ)
|
||||
size = MODULE_INFO_MAX_READ;
|
||||
|
||||
inbox = mlx4_alloc_cmd_mailbox(dev);
|
||||
if (IS_ERR(inbox))
|
||||
return PTR_ERR(inbox);
|
||||
|
||||
outbox = mlx4_alloc_cmd_mailbox(dev);
|
||||
if (IS_ERR(outbox)) {
|
||||
mlx4_free_cmd_mailbox(dev, inbox);
|
||||
return PTR_ERR(outbox);
|
||||
}
|
||||
|
||||
inmad = (struct mlx4_mad_ifc *)(inbox->buf);
|
||||
outmad = (struct mlx4_mad_ifc *)(outbox->buf);
|
||||
|
||||
inmad->method = 0x1; /* Get */
|
||||
inmad->class_version = 0x1;
|
||||
inmad->mgmt_class = 0x1;
|
||||
inmad->base_version = 0x1;
|
||||
inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
|
||||
|
||||
if (offset < I2C_PAGE_SIZE && offset + size > I2C_PAGE_SIZE)
|
||||
/* Cross pages reads are not allowed
|
||||
* read until offset 256 in low page
|
||||
*/
|
||||
size -= offset + size - I2C_PAGE_SIZE;
|
||||
|
||||
i2c_addr = I2C_ADDR_LOW;
|
||||
if (offset >= I2C_PAGE_SIZE) {
|
||||
/* Reset offset to high page */
|
||||
i2c_addr = I2C_ADDR_HIGH;
|
||||
offset -= I2C_PAGE_SIZE;
|
||||
}
|
||||
|
||||
cable_info = (struct mlx4_cable_info *)inmad->data;
|
||||
cable_info->dev_mem_address = cpu_to_be16(offset);
|
||||
cable_info->page_num = 0;
|
||||
cable_info->i2c_addr = i2c_addr;
|
||||
cable_info->size = cpu_to_be16(size);
|
||||
|
||||
ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
|
||||
MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
if (be16_to_cpu(outmad->status)) {
|
||||
/* Mad returned with bad status */
|
||||
ret = be16_to_cpu(outmad->status);
|
||||
#ifdef DEBUG
|
||||
mlx4_warn(dev, "MLX4_CMD_MAD_IFC Get Module info attr(%x) "
|
||||
"port(%d) i2c_addr(%x) offset(%d) size(%d): Response "
|
||||
"Mad Status(%x) - %s\n", 0xFF60, port, i2c_addr, offset,
|
||||
size, ret, cable_info_mad_err_str(ret));
|
||||
#endif
|
||||
if (i2c_addr == I2C_ADDR_HIGH &&
|
||||
MAD_STATUS_2_CABLE_ERR(ret) == CABLE_INF_I2C_ADDR)
|
||||
/* Some SFP cables do not support i2c slave
|
||||
* address 0x51 (high page), abort silently.
|
||||
*/
|
||||
ret = 0;
|
||||
else
|
||||
ret = -ret;
|
||||
goto out;
|
||||
}
|
||||
cable_info = (struct mlx4_cable_info *)outmad->data;
|
||||
memcpy(data, cable_info->data, size);
|
||||
ret = size;
|
||||
out:
|
||||
mlx4_free_cmd_mailbox(dev, inbox);
|
||||
mlx4_free_cmd_mailbox(dev, outbox);
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL(mlx4_get_module_info);
|
||||
|
@ -892,6 +892,26 @@ struct mlx4_init_port_param {
|
||||
u64 si_guid;
|
||||
};
|
||||
|
||||
#define MAD_IFC_DATA_SZ 192
|
||||
/* MAD IFC Mailbox */
|
||||
struct mlx4_mad_ifc {
|
||||
u8 base_version;
|
||||
u8 mgmt_class;
|
||||
u8 class_version;
|
||||
u8 method;
|
||||
__be16 status;
|
||||
__be16 class_specific;
|
||||
__be64 tid;
|
||||
__be16 attr_id;
|
||||
__be16 resv;
|
||||
__be32 attr_mod;
|
||||
__be64 mkey;
|
||||
__be16 dr_slid;
|
||||
__be16 dr_dlid;
|
||||
u8 reserved[28];
|
||||
u8 data[MAD_IFC_DATA_SZ];
|
||||
} __packed;
|
||||
|
||||
#define mlx4_foreach_port(port, dev, type) \
|
||||
for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++) \
|
||||
if ((type) == (dev)->caps.port_mask[(port)])
|
||||
@ -1294,4 +1314,7 @@ int mlx4_read_clock(struct mlx4_dev *dev);
|
||||
int mlx4_get_internal_clock_params(struct mlx4_dev *dev,
|
||||
struct mlx4_clock_params *params);
|
||||
|
||||
int mlx4_get_module_info(struct mlx4_dev *dev, u8 port,
|
||||
u16 offset, u16 size, u8 *data);
|
||||
|
||||
#endif /* MLX4_DEVICE_H */
|
||||
|
Loading…
Reference in New Issue
Block a user