Totally change the way that devices are made in the MFS and subsequently
probed in sysinstall. Rather than make template devices and use up lots of inodes, also restricting the number of devices that can be dealt with, mknod all necessary devices as necessary using built-in information. This removes a number of constraints on the number and type of devices that sysinstall can see.
This commit is contained in:
jkh
parent
318a85176d
commit
e0583dc8d8
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: devices.c,v 1.67 1998/01/21 19:25:49 jkh Exp $
|
||||
* $Id: devices.c,v 1.68 1998/01/22 21:14:31 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -52,50 +52,50 @@
|
||||
static Device *Devices[DEV_MAX];
|
||||
static int numDevs;
|
||||
|
||||
static struct {
|
||||
static struct _devname {
|
||||
DeviceType type;
|
||||
char *name;
|
||||
char *description;
|
||||
int major, minor, delta, max;
|
||||
char dev_type;
|
||||
} device_names[] = {
|
||||
{ DEVICE_TYPE_CDROM, "cd0a", "SCSI CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "mcd0a", "Mitsumi (old model) CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "scd0a", "Sony CDROM drive - CDU31/33A type", },
|
||||
{ DEVICE_TYPE_CDROM, "matcd0a", "Matsushita CDROM ('sound blaster' type)" },
|
||||
{ DEVICE_TYPE_CDROM, "wcd0c", "ATAPI IDE CDROM" },
|
||||
{ DEVICE_TYPE_TAPE, "rst0", "SCSI tape drive" },
|
||||
{ DEVICE_TYPE_TAPE, "rsa0", "SCSI tape drive (CAM)" },
|
||||
{ DEVICE_TYPE_TAPE, "rft0", "Floppy tape drive (QIC-02)" },
|
||||
{ DEVICE_TYPE_TAPE, "rwt0", "Wangtek tape drive" },
|
||||
{ DEVICE_TYPE_DISK, "sd", "SCSI disk device" },
|
||||
{ DEVICE_TYPE_DISK, "da", "SCSI disk device (CAM)" },
|
||||
{ DEVICE_TYPE_DISK, "wd", "IDE/ESDI/MFM/ST506 disk device" },
|
||||
{ DEVICE_TYPE_DISK, "wfd", "ATAPI floppy (LS-120) device" },
|
||||
{ DEVICE_TYPE_DISK, "od", "SCSI optical disk device" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd0", "floppy drive unit A" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd1", "floppy drive unit B" },
|
||||
{ DEVICE_TYPE_FLOPPY, "od0", "SCSI optical disk/floppy format" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa0", "%s on serial port 0 (COM1)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa1", "%s on serial port 1 (COM2)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa2", "%s on serial port 2 (COM3)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa3", "%s on serial port 3 (COM4)" },
|
||||
{ DEVICE_TYPE_NETWORK, "lp0", "Parallel Port IP (PLIP) using laplink cable" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ NULL },
|
||||
{ DEVICE_TYPE_CDROM, "cd%dc", "SCSI CDROM drive", 6, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "mcd%dc", "Mitsumi (old model) CDROM drive", 7, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "scd%dc", "Sony CDROM drive - CDU31/33A type", 16, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "matcd%dc", "Matsushita CDROM ('sound blaster' type)", 17, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "wcd%dc", "ATAPI IDE CDROM", 19, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_TAPE, "rst%d", "SCSI tape drive", 14, 0, 16, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rft%d", "Floppy tape drive (QIC-02)", 9, 32, 64, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rwt%d", "Wangtek tape drive", 10, 0, 1, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "sd%d", "SCSI disk device", 4, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rsd%d", "SCSI disk device", 13, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wd%d", "IDE/ESDI/MFM/ST506 disk device", 0, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwd%d", "IDE/ESDI/MFM/ST506 disk device", 3, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "od%d", "SCSI optical disk device", 20, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rod%d", "SCSI optical disk device", 70, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wfd%d", "ATAPI FLOPPY (LS-120) device", 24, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwfd%d", "ATAPI FLOPPY (LS-120) device", 87, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
|
||||
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa%d", "%s on device %s (COM%d)", 28, 128, 1, 16, 'c' },
|
||||
{ DEVICE_TYPE_NETWORK, "lp", "Parallel Port IP (PLIP) peer connection" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ 0 },
|
||||
};
|
||||
|
||||
Device *
|
||||
@ -130,17 +130,30 @@ dummyShutdown(Device *dev)
|
||||
}
|
||||
|
||||
static int
|
||||
deviceTry(char *name, char *try)
|
||||
deviceTry(struct _devname dev, char *try, int i)
|
||||
{
|
||||
int fd;
|
||||
char unit[80];
|
||||
mode_t m;
|
||||
dev_t d;
|
||||
int fail;
|
||||
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", name);
|
||||
snprintf(unit, sizeof unit, dev.name, i);
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", unit);
|
||||
m = 0666;
|
||||
if (dev.dev_type == 'c')
|
||||
m |= S_IFCHR;
|
||||
else
|
||||
m |= S_IFBLK;
|
||||
d = makedev(dev.major, dev.minor + (i * dev.delta));
|
||||
fail = mknod(try, m, d);
|
||||
fd = open(try, O_RDONLY);
|
||||
if (fd > 0)
|
||||
return fd;
|
||||
if (errno == EBUSY)
|
||||
return -1;
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", name);
|
||||
else if (!fail)
|
||||
(void)unlink(try);
|
||||
/* Don't try a "make-under" here since we're using a fixit floppy in this case */
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", unit);
|
||||
fd = open(try, O_RDONLY);
|
||||
return fd;
|
||||
}
|
||||
@ -175,47 +188,14 @@ deviceRegister(char *name, char *desc, char *devname, DeviceType type, Boolean e
|
||||
void
|
||||
deviceGetAll(void)
|
||||
{
|
||||
int i, fd, s;
|
||||
int i, j, fd, s;
|
||||
struct ifconf ifc;
|
||||
struct ifreq *ifptr, *end;
|
||||
int ifflags;
|
||||
char buffer[INTERFACE_MAX * sizeof(struct ifreq)];
|
||||
char **names;
|
||||
|
||||
/* Try and get the disks first */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
(void)deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE, NULL, NULL, NULL, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
sprintf(devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
|
||||
/* Now go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
/* First go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
ifc.ifc_len = sizeof(buffer);
|
||||
ifc.ifc_buf = buffer;
|
||||
|
||||
@ -238,7 +218,7 @@ deviceGetAll(void)
|
||||
continue;
|
||||
|
||||
/* Eliminate network devices that don't make sense */
|
||||
if (!strncmp(ifptr->ifr_name, "lo0", 3))
|
||||
if (!strncmp(ifptr->ifr_name, "lo", 2))
|
||||
continue;
|
||||
|
||||
/* If we have a slip device, don't register it */
|
||||
@ -253,7 +233,9 @@ deviceGetAll(void)
|
||||
for (i = 0, descr = NULL; device_names[i].name; i++) {
|
||||
int len = strlen(device_names[i].name);
|
||||
|
||||
if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
if (!ifptr->ifr_name || !ifptr->ifr_name[0])
|
||||
continue;
|
||||
else if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
descr = device_names[i].description;
|
||||
break;
|
||||
}
|
||||
@ -274,72 +256,115 @@ deviceGetAll(void)
|
||||
}
|
||||
|
||||
skipif:
|
||||
/* Finally, try to find all the types of devices one might need
|
||||
/* Next, try to find all the types of devices one might need
|
||||
* during the second stage of the installation.
|
||||
*/
|
||||
for (i = 0; device_names[i].name; i++) {
|
||||
char try[FILENAME_MAX];
|
||||
for (j = 0; j < device_names[i].max; j++) {
|
||||
char try[FILENAME_MAX];
|
||||
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
msgDebug("Try for %s returns errno %d\n", device_names[i].name, errno);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device named %s\n", device_names[i].name);
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_DISK:
|
||||
/* We do this just for the side-effect of creating the device entries. The actual registration
|
||||
is done through the libdisk API later. */
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0)
|
||||
close(fd);
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface", try, j + 1);
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to sl0\n", try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface", try, j + 1);
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to ppp0\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface");
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to sl0\n", device_names[i].name, try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface");
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to ppp0\n", device_names[i].name, try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* Finally, go get the disks and look for DOS partitions to register */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE,
|
||||
dummyInit, dummyGet, dummyShutdown, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register as "DOS media devices" */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
snprintf(devname, sizeof devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last attempt in the `sysinstall' line, the next
|
||||
* generation being slated to essentially a complete rewrite.
|
||||
*
|
||||
* $Id: floppy.c,v 1.26 1998/01/16 15:07:54 jkh Exp $
|
||||
* $Id: floppy.c,v 1.27 1998/02/08 20:18:19 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -53,23 +53,10 @@
|
||||
#undef MSDOSFS
|
||||
|
||||
#include <ufs/ufs/ufsmount.h>
|
||||
static Device *floppyDev;
|
||||
static Boolean floppyMounted;
|
||||
|
||||
char *distWanted;
|
||||
|
||||
/* For finding floppies */
|
||||
static int
|
||||
floppyChoiceHook(dialogMenuItem *self)
|
||||
{
|
||||
Device **devs;
|
||||
|
||||
devs = deviceFind(self->prompt, DEVICE_TYPE_FLOPPY);
|
||||
if (devs)
|
||||
floppyDev = devs[0];
|
||||
return devs ? DITEM_LEAVE_MENU : DITEM_FAILURE;
|
||||
}
|
||||
|
||||
Boolean
|
||||
mediaInitFloppy(Device *dev)
|
||||
{
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: install.c,v 1.203 1997/12/29 20:07:17 jkh Exp $
|
||||
* $Id: install.c,v 1.204 1998/01/16 15:07:55 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -874,7 +874,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
|
||||
if (rootdev && RunningAsInit) {
|
||||
/* Next, create and/or mount the root device */
|
||||
sprintf(dname, "/dev/r%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/r%s", rootdev->name);
|
||||
if (!Fake && (!MakeDevChunk(rootdev, "/dev") || !file_readable(dname))) {
|
||||
msgConfirm("Unable to make device node for %s in /dev!\n"
|
||||
"The creation of filesystems will be aborted.", dname);
|
||||
@ -907,7 +907,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
}
|
||||
|
||||
/* Switch to block device */
|
||||
sprintf(dname, "/dev/%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/%s", rootdev->name);
|
||||
if (Mount("/mnt", dname)) {
|
||||
msgConfirm("Unable to mount the root file system on %s! Giving up.", dname);
|
||||
return DITEM_FAILURE;
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: menus.c,v 1.151 1997/11/26 22:48:24 joerg Exp $
|
||||
* $Id: menus.c,v 1.152 1998/01/27 14:01:19 yokota Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -632,8 +632,8 @@ DMenu MenuNetworkDevice = {
|
||||
"If you're using SLIP over a serial device then the expectation is\n"
|
||||
"that you have a HARDWIRED connection.\n\n"
|
||||
"You can also install over a parallel port using a special \"laplink\"\n"
|
||||
"cable to another machine running a fairly recent (2.0R or later) version\n"
|
||||
"of FreeBSD.",
|
||||
"cable to another machine running a fairly recent (2.0R or later)\n"
|
||||
"version of FreeBSD.",
|
||||
"Press F1 to read network configuration manual",
|
||||
"network_device",
|
||||
{ { NULL } },
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: devices.c,v 1.67 1998/01/21 19:25:49 jkh Exp $
|
||||
* $Id: devices.c,v 1.68 1998/01/22 21:14:31 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -52,50 +52,50 @@
|
||||
static Device *Devices[DEV_MAX];
|
||||
static int numDevs;
|
||||
|
||||
static struct {
|
||||
static struct _devname {
|
||||
DeviceType type;
|
||||
char *name;
|
||||
char *description;
|
||||
int major, minor, delta, max;
|
||||
char dev_type;
|
||||
} device_names[] = {
|
||||
{ DEVICE_TYPE_CDROM, "cd0a", "SCSI CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "mcd0a", "Mitsumi (old model) CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "scd0a", "Sony CDROM drive - CDU31/33A type", },
|
||||
{ DEVICE_TYPE_CDROM, "matcd0a", "Matsushita CDROM ('sound blaster' type)" },
|
||||
{ DEVICE_TYPE_CDROM, "wcd0c", "ATAPI IDE CDROM" },
|
||||
{ DEVICE_TYPE_TAPE, "rst0", "SCSI tape drive" },
|
||||
{ DEVICE_TYPE_TAPE, "rsa0", "SCSI tape drive (CAM)" },
|
||||
{ DEVICE_TYPE_TAPE, "rft0", "Floppy tape drive (QIC-02)" },
|
||||
{ DEVICE_TYPE_TAPE, "rwt0", "Wangtek tape drive" },
|
||||
{ DEVICE_TYPE_DISK, "sd", "SCSI disk device" },
|
||||
{ DEVICE_TYPE_DISK, "da", "SCSI disk device (CAM)" },
|
||||
{ DEVICE_TYPE_DISK, "wd", "IDE/ESDI/MFM/ST506 disk device" },
|
||||
{ DEVICE_TYPE_DISK, "wfd", "ATAPI floppy (LS-120) device" },
|
||||
{ DEVICE_TYPE_DISK, "od", "SCSI optical disk device" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd0", "floppy drive unit A" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd1", "floppy drive unit B" },
|
||||
{ DEVICE_TYPE_FLOPPY, "od0", "SCSI optical disk/floppy format" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa0", "%s on serial port 0 (COM1)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa1", "%s on serial port 1 (COM2)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa2", "%s on serial port 2 (COM3)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa3", "%s on serial port 3 (COM4)" },
|
||||
{ DEVICE_TYPE_NETWORK, "lp0", "Parallel Port IP (PLIP) using laplink cable" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ NULL },
|
||||
{ DEVICE_TYPE_CDROM, "cd%dc", "SCSI CDROM drive", 6, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "mcd%dc", "Mitsumi (old model) CDROM drive", 7, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "scd%dc", "Sony CDROM drive - CDU31/33A type", 16, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "matcd%dc", "Matsushita CDROM ('sound blaster' type)", 17, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "wcd%dc", "ATAPI IDE CDROM", 19, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_TAPE, "rst%d", "SCSI tape drive", 14, 0, 16, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rft%d", "Floppy tape drive (QIC-02)", 9, 32, 64, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rwt%d", "Wangtek tape drive", 10, 0, 1, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "sd%d", "SCSI disk device", 4, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rsd%d", "SCSI disk device", 13, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wd%d", "IDE/ESDI/MFM/ST506 disk device", 0, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwd%d", "IDE/ESDI/MFM/ST506 disk device", 3, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "od%d", "SCSI optical disk device", 20, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rod%d", "SCSI optical disk device", 70, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wfd%d", "ATAPI FLOPPY (LS-120) device", 24, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwfd%d", "ATAPI FLOPPY (LS-120) device", 87, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
|
||||
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa%d", "%s on device %s (COM%d)", 28, 128, 1, 16, 'c' },
|
||||
{ DEVICE_TYPE_NETWORK, "lp", "Parallel Port IP (PLIP) peer connection" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ 0 },
|
||||
};
|
||||
|
||||
Device *
|
||||
@ -130,17 +130,30 @@ dummyShutdown(Device *dev)
|
||||
}
|
||||
|
||||
static int
|
||||
deviceTry(char *name, char *try)
|
||||
deviceTry(struct _devname dev, char *try, int i)
|
||||
{
|
||||
int fd;
|
||||
char unit[80];
|
||||
mode_t m;
|
||||
dev_t d;
|
||||
int fail;
|
||||
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", name);
|
||||
snprintf(unit, sizeof unit, dev.name, i);
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", unit);
|
||||
m = 0666;
|
||||
if (dev.dev_type == 'c')
|
||||
m |= S_IFCHR;
|
||||
else
|
||||
m |= S_IFBLK;
|
||||
d = makedev(dev.major, dev.minor + (i * dev.delta));
|
||||
fail = mknod(try, m, d);
|
||||
fd = open(try, O_RDONLY);
|
||||
if (fd > 0)
|
||||
return fd;
|
||||
if (errno == EBUSY)
|
||||
return -1;
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", name);
|
||||
else if (!fail)
|
||||
(void)unlink(try);
|
||||
/* Don't try a "make-under" here since we're using a fixit floppy in this case */
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", unit);
|
||||
fd = open(try, O_RDONLY);
|
||||
return fd;
|
||||
}
|
||||
@ -175,47 +188,14 @@ deviceRegister(char *name, char *desc, char *devname, DeviceType type, Boolean e
|
||||
void
|
||||
deviceGetAll(void)
|
||||
{
|
||||
int i, fd, s;
|
||||
int i, j, fd, s;
|
||||
struct ifconf ifc;
|
||||
struct ifreq *ifptr, *end;
|
||||
int ifflags;
|
||||
char buffer[INTERFACE_MAX * sizeof(struct ifreq)];
|
||||
char **names;
|
||||
|
||||
/* Try and get the disks first */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
(void)deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE, NULL, NULL, NULL, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
sprintf(devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
|
||||
/* Now go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
/* First go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
ifc.ifc_len = sizeof(buffer);
|
||||
ifc.ifc_buf = buffer;
|
||||
|
||||
@ -238,7 +218,7 @@ deviceGetAll(void)
|
||||
continue;
|
||||
|
||||
/* Eliminate network devices that don't make sense */
|
||||
if (!strncmp(ifptr->ifr_name, "lo0", 3))
|
||||
if (!strncmp(ifptr->ifr_name, "lo", 2))
|
||||
continue;
|
||||
|
||||
/* If we have a slip device, don't register it */
|
||||
@ -253,7 +233,9 @@ deviceGetAll(void)
|
||||
for (i = 0, descr = NULL; device_names[i].name; i++) {
|
||||
int len = strlen(device_names[i].name);
|
||||
|
||||
if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
if (!ifptr->ifr_name || !ifptr->ifr_name[0])
|
||||
continue;
|
||||
else if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
descr = device_names[i].description;
|
||||
break;
|
||||
}
|
||||
@ -274,72 +256,115 @@ deviceGetAll(void)
|
||||
}
|
||||
|
||||
skipif:
|
||||
/* Finally, try to find all the types of devices one might need
|
||||
/* Next, try to find all the types of devices one might need
|
||||
* during the second stage of the installation.
|
||||
*/
|
||||
for (i = 0; device_names[i].name; i++) {
|
||||
char try[FILENAME_MAX];
|
||||
for (j = 0; j < device_names[i].max; j++) {
|
||||
char try[FILENAME_MAX];
|
||||
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
msgDebug("Try for %s returns errno %d\n", device_names[i].name, errno);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device named %s\n", device_names[i].name);
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_DISK:
|
||||
/* We do this just for the side-effect of creating the device entries. The actual registration
|
||||
is done through the libdisk API later. */
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0)
|
||||
close(fd);
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface", try, j + 1);
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to sl0\n", try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface", try, j + 1);
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to ppp0\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface");
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to sl0\n", device_names[i].name, try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface");
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to ppp0\n", device_names[i].name, try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* Finally, go get the disks and look for DOS partitions to register */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE,
|
||||
dummyInit, dummyGet, dummyShutdown, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register as "DOS media devices" */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
snprintf(devname, sizeof devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: install.c,v 1.203 1997/12/29 20:07:17 jkh Exp $
|
||||
* $Id: install.c,v 1.204 1998/01/16 15:07:55 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -874,7 +874,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
|
||||
if (rootdev && RunningAsInit) {
|
||||
/* Next, create and/or mount the root device */
|
||||
sprintf(dname, "/dev/r%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/r%s", rootdev->name);
|
||||
if (!Fake && (!MakeDevChunk(rootdev, "/dev") || !file_readable(dname))) {
|
||||
msgConfirm("Unable to make device node for %s in /dev!\n"
|
||||
"The creation of filesystems will be aborted.", dname);
|
||||
@ -907,7 +907,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
}
|
||||
|
||||
/* Switch to block device */
|
||||
sprintf(dname, "/dev/%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/%s", rootdev->name);
|
||||
if (Mount("/mnt", dname)) {
|
||||
msgConfirm("Unable to mount the root file system on %s! Giving up.", dname);
|
||||
return DITEM_FAILURE;
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: menus.c,v 1.151 1997/11/26 22:48:24 joerg Exp $
|
||||
* $Id: menus.c,v 1.152 1998/01/27 14:01:19 yokota Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -632,8 +632,8 @@ DMenu MenuNetworkDevice = {
|
||||
"If you're using SLIP over a serial device then the expectation is\n"
|
||||
"that you have a HARDWIRED connection.\n\n"
|
||||
"You can also install over a parallel port using a special \"laplink\"\n"
|
||||
"cable to another machine running a fairly recent (2.0R or later) version\n"
|
||||
"of FreeBSD.",
|
||||
"cable to another machine running a fairly recent (2.0R or later)\n"
|
||||
"version of FreeBSD.",
|
||||
"Press F1 to read network configuration manual",
|
||||
"network_device",
|
||||
{ { NULL } },
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: devices.c,v 1.67 1998/01/21 19:25:49 jkh Exp $
|
||||
* $Id: devices.c,v 1.68 1998/01/22 21:14:31 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -52,50 +52,50 @@
|
||||
static Device *Devices[DEV_MAX];
|
||||
static int numDevs;
|
||||
|
||||
static struct {
|
||||
static struct _devname {
|
||||
DeviceType type;
|
||||
char *name;
|
||||
char *description;
|
||||
int major, minor, delta, max;
|
||||
char dev_type;
|
||||
} device_names[] = {
|
||||
{ DEVICE_TYPE_CDROM, "cd0a", "SCSI CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "mcd0a", "Mitsumi (old model) CDROM drive" },
|
||||
{ DEVICE_TYPE_CDROM, "scd0a", "Sony CDROM drive - CDU31/33A type", },
|
||||
{ DEVICE_TYPE_CDROM, "matcd0a", "Matsushita CDROM ('sound blaster' type)" },
|
||||
{ DEVICE_TYPE_CDROM, "wcd0c", "ATAPI IDE CDROM" },
|
||||
{ DEVICE_TYPE_TAPE, "rst0", "SCSI tape drive" },
|
||||
{ DEVICE_TYPE_TAPE, "rsa0", "SCSI tape drive (CAM)" },
|
||||
{ DEVICE_TYPE_TAPE, "rft0", "Floppy tape drive (QIC-02)" },
|
||||
{ DEVICE_TYPE_TAPE, "rwt0", "Wangtek tape drive" },
|
||||
{ DEVICE_TYPE_DISK, "sd", "SCSI disk device" },
|
||||
{ DEVICE_TYPE_DISK, "da", "SCSI disk device (CAM)" },
|
||||
{ DEVICE_TYPE_DISK, "wd", "IDE/ESDI/MFM/ST506 disk device" },
|
||||
{ DEVICE_TYPE_DISK, "wfd", "ATAPI floppy (LS-120) device" },
|
||||
{ DEVICE_TYPE_DISK, "od", "SCSI optical disk device" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd0", "floppy drive unit A" },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd1", "floppy drive unit B" },
|
||||
{ DEVICE_TYPE_FLOPPY, "od0", "SCSI optical disk/floppy format" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa0", "%s on serial port 0 (COM1)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa1", "%s on serial port 1 (COM2)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa2", "%s on serial port 2 (COM3)" },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa3", "%s on serial port 3 (COM4)" },
|
||||
{ DEVICE_TYPE_NETWORK, "lp0", "Parallel Port IP (PLIP) using laplink cable" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ NULL },
|
||||
{ DEVICE_TYPE_CDROM, "cd%dc", "SCSI CDROM drive", 6, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "mcd%dc", "Mitsumi (old model) CDROM drive", 7, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "scd%dc", "Sony CDROM drive - CDU31/33A type", 16, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "matcd%dc", "Matsushita CDROM ('sound blaster' type)", 17, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_CDROM, "wcd%dc", "ATAPI IDE CDROM", 19, 2, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_TAPE, "rst%d", "SCSI tape drive", 14, 0, 16, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rft%d", "Floppy tape drive (QIC-02)", 9, 32, 64, 4, 'c' },
|
||||
{ DEVICE_TYPE_TAPE, "rwt%d", "Wangtek tape drive", 10, 0, 1, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "sd%d", "SCSI disk device", 4, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rsd%d", "SCSI disk device", 13, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wd%d", "IDE/ESDI/MFM/ST506 disk device", 0, 65538, 8, 32, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwd%d", "IDE/ESDI/MFM/ST506 disk device", 3, 65538, 8, 32, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "od%d", "SCSI optical disk device", 20, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rod%d", "SCSI optical disk device", 70, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_DISK, "wfd%d", "ATAPI FLOPPY (LS-120) device", 24, 65538, 8, 4, 'b' },
|
||||
{ DEVICE_TYPE_DISK, "rwfd%d", "ATAPI FLOPPY (LS-120) device", 87, 65538, 8, 4, 'c' },
|
||||
{ DEVICE_TYPE_FLOPPY, "fd%d", "floppy drive unit A", 2, 0, 64, 4, 'b' },
|
||||
{ DEVICE_TYPE_FLOPPY, "worm%d", "SCSI optical disk / CDR", 23, 0, 1, 4, 'b' },
|
||||
{ DEVICE_TYPE_NETWORK, "cuaa%d", "%s on device %s (COM%d)", 28, 128, 1, 16, 'c' },
|
||||
{ DEVICE_TYPE_NETWORK, "lp", "Parallel Port IP (PLIP) peer connection" },
|
||||
{ DEVICE_TYPE_NETWORK, "lo", "Loop-back (local) network interface" },
|
||||
{ DEVICE_TYPE_NETWORK, "de", "DEC DE435 PCI NIC or other DC21040-AA based card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fxp", "Intel EtherExpress Pro/100B PCI Fast Ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ed", "WD/SMC 80xx; Novell NE1000/2000; 3Com 3C503 card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ep", "3Com 3C509 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "el", "3Com 3C501 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ex", "Intel EtherExpress Pro/10 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "fe", "Fujitsu MB86960A/MB86965A ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ie", "AT&T StarLAN 10 and EN100; 3Com 3C507; NI5210" },
|
||||
{ DEVICE_TYPE_NETWORK, "ix", "Intel Etherexpress ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "le", "DEC EtherWorks 2 or 3 ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "lnc", "Lance/PCnet (Isolan/Novell NE2100/NE32-VL) ethernet" },
|
||||
{ DEVICE_TYPE_NETWORK, "tx", "SMC 9432TX ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "vx", "3COM 3c590 / 3c595 / 3c9xx ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "ze", "IBM/National Semiconductor PCMCIA ethernet card" },
|
||||
{ DEVICE_TYPE_NETWORK, "zp", "3Com Etherlink III PCMCIA ethernet card" },
|
||||
{ 0 },
|
||||
};
|
||||
|
||||
Device *
|
||||
@ -130,17 +130,30 @@ dummyShutdown(Device *dev)
|
||||
}
|
||||
|
||||
static int
|
||||
deviceTry(char *name, char *try)
|
||||
deviceTry(struct _devname dev, char *try, int i)
|
||||
{
|
||||
int fd;
|
||||
char unit[80];
|
||||
mode_t m;
|
||||
dev_t d;
|
||||
int fail;
|
||||
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", name);
|
||||
snprintf(unit, sizeof unit, dev.name, i);
|
||||
snprintf(try, FILENAME_MAX, "/dev/%s", unit);
|
||||
m = 0666;
|
||||
if (dev.dev_type == 'c')
|
||||
m |= S_IFCHR;
|
||||
else
|
||||
m |= S_IFBLK;
|
||||
d = makedev(dev.major, dev.minor + (i * dev.delta));
|
||||
fail = mknod(try, m, d);
|
||||
fd = open(try, O_RDONLY);
|
||||
if (fd > 0)
|
||||
return fd;
|
||||
if (errno == EBUSY)
|
||||
return -1;
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", name);
|
||||
else if (!fail)
|
||||
(void)unlink(try);
|
||||
/* Don't try a "make-under" here since we're using a fixit floppy in this case */
|
||||
snprintf(try, FILENAME_MAX, "/mnt/dev/%s", unit);
|
||||
fd = open(try, O_RDONLY);
|
||||
return fd;
|
||||
}
|
||||
@ -175,47 +188,14 @@ deviceRegister(char *name, char *desc, char *devname, DeviceType type, Boolean e
|
||||
void
|
||||
deviceGetAll(void)
|
||||
{
|
||||
int i, fd, s;
|
||||
int i, j, fd, s;
|
||||
struct ifconf ifc;
|
||||
struct ifreq *ifptr, *end;
|
||||
int ifflags;
|
||||
char buffer[INTERFACE_MAX * sizeof(struct ifreq)];
|
||||
char **names;
|
||||
|
||||
/* Try and get the disks first */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
(void)deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE, NULL, NULL, NULL, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
sprintf(devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
|
||||
/* Now go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
/* First go for the network interfaces. Stolen shamelessly from ifconfig! */
|
||||
ifc.ifc_len = sizeof(buffer);
|
||||
ifc.ifc_buf = buffer;
|
||||
|
||||
@ -238,7 +218,7 @@ deviceGetAll(void)
|
||||
continue;
|
||||
|
||||
/* Eliminate network devices that don't make sense */
|
||||
if (!strncmp(ifptr->ifr_name, "lo0", 3))
|
||||
if (!strncmp(ifptr->ifr_name, "lo", 2))
|
||||
continue;
|
||||
|
||||
/* If we have a slip device, don't register it */
|
||||
@ -253,7 +233,9 @@ deviceGetAll(void)
|
||||
for (i = 0, descr = NULL; device_names[i].name; i++) {
|
||||
int len = strlen(device_names[i].name);
|
||||
|
||||
if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
if (!ifptr->ifr_name || !ifptr->ifr_name[0])
|
||||
continue;
|
||||
else if (!strncmp(ifptr->ifr_name, device_names[i].name, len)) {
|
||||
descr = device_names[i].description;
|
||||
break;
|
||||
}
|
||||
@ -274,72 +256,115 @@ deviceGetAll(void)
|
||||
}
|
||||
|
||||
skipif:
|
||||
/* Finally, try to find all the types of devices one might need
|
||||
/* Next, try to find all the types of devices one might need
|
||||
* during the second stage of the installation.
|
||||
*/
|
||||
for (i = 0; device_names[i].name; i++) {
|
||||
char try[FILENAME_MAX];
|
||||
for (j = 0; j < device_names[i].max; j++) {
|
||||
char try[FILENAME_MAX];
|
||||
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
msgDebug("Try for %s returns errno %d\n", device_names[i].name, errno);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device named %s\n", device_names[i].name);
|
||||
switch(device_names[i].type) {
|
||||
case DEVICE_TYPE_CDROM:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0 || errno == EBUSY) { /* EBUSY if already mounted */
|
||||
if (fd >= 0) close(fd);
|
||||
(void)deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_CDROM, TRUE, mediaInitCDROM, mediaGetCDROM,
|
||||
mediaShutdownCDROM, NULL);
|
||||
msgDebug("Found a CDROM device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_DISK:
|
||||
/* We do this just for the side-effect of creating the device entries. The actual registration
|
||||
is done through the libdisk API later. */
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0)
|
||||
close(fd);
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device for %s\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i], try, j);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface", try, j + 1);
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to sl0\n", try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface", try, j + 1);
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s to ppp0\n", try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_TAPE:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_TAPE, TRUE, mediaInitTape, mediaGetTape, mediaShutdownTape, NULL);
|
||||
msgDebug("Found a TAPE device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_FLOPPY:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
if (fd >= 0) {
|
||||
close(fd);
|
||||
deviceRegister(device_names[i].name, device_names[i].description, strdup(try),
|
||||
DEVICE_TYPE_FLOPPY, TRUE, mediaInitFloppy, mediaGetFloppy,
|
||||
mediaShutdownFloppy, NULL);
|
||||
msgDebug("Found a floppy device named %s\n", device_names[i].name);
|
||||
}
|
||||
break;
|
||||
|
||||
case DEVICE_TYPE_NETWORK:
|
||||
fd = deviceTry(device_names[i].name, try);
|
||||
/* The only network devices that you can open this way are serial ones */
|
||||
if (fd >= 0) {
|
||||
char *newdesc, *cp;
|
||||
|
||||
close(fd);
|
||||
cp = device_names[i].description;
|
||||
/* Serial devices get a slip and ppp device each, if supported */
|
||||
newdesc = safe_malloc(strlen(cp) + 40);
|
||||
sprintf(newdesc, cp, "SLIP interface");
|
||||
deviceRegister("sl0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to sl0\n", device_names[i].name, try);
|
||||
newdesc = safe_malloc(strlen(cp) + 50);
|
||||
sprintf(newdesc, cp, "PPP interface");
|
||||
deviceRegister("ppp0", newdesc, strdup(try), DEVICE_TYPE_NETWORK, TRUE, mediaInitNetwork,
|
||||
NULL, mediaShutdownNetwork, NULL);
|
||||
msgDebug("Add mapping for %s on %s to ppp0\n", device_names[i].name, try);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* Finally, go get the disks and look for DOS partitions to register */
|
||||
if ((names = Disk_Names()) != NULL) {
|
||||
int i;
|
||||
|
||||
for (i = 0; names[i]; i++) {
|
||||
Chunk *c1;
|
||||
Disk *d;
|
||||
|
||||
d = Open_Disk(names[i]);
|
||||
if (!d)
|
||||
msgFatal("Unable to open disk %s", names[i]);
|
||||
|
||||
deviceRegister(names[i], names[i], d->name, DEVICE_TYPE_DISK, FALSE,
|
||||
dummyInit, dummyGet, dummyShutdown, d);
|
||||
msgDebug("Found a disk device named %s\n", names[i]);
|
||||
|
||||
/* Look for existing DOS partitions to register as "DOS media devices" */
|
||||
for (c1 = d->chunks->part; c1; c1 = c1->next) {
|
||||
if (c1->type == fat || c1->type == extended) {
|
||||
Device *dev;
|
||||
char devname[80];
|
||||
|
||||
/* Got one! */
|
||||
snprintf(devname, sizeof devname, "/dev/%s", c1->name);
|
||||
dev = deviceRegister(c1->name, c1->name, strdup(devname), DEVICE_TYPE_DOS, TRUE,
|
||||
mediaInitDOS, mediaGetDOS, mediaShutdownDOS, NULL);
|
||||
dev->private = c1;
|
||||
msgDebug("Found a DOS partition %s on drive %s\n", c1->name, d->name);
|
||||
}
|
||||
}
|
||||
}
|
||||
free(names);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last attempt in the `sysinstall' line, the next
|
||||
* generation being slated to essentially a complete rewrite.
|
||||
*
|
||||
* $Id: floppy.c,v 1.26 1998/01/16 15:07:54 jkh Exp $
|
||||
* $Id: floppy.c,v 1.27 1998/02/08 20:18:19 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -53,23 +53,10 @@
|
||||
#undef MSDOSFS
|
||||
|
||||
#include <ufs/ufs/ufsmount.h>
|
||||
static Device *floppyDev;
|
||||
static Boolean floppyMounted;
|
||||
|
||||
char *distWanted;
|
||||
|
||||
/* For finding floppies */
|
||||
static int
|
||||
floppyChoiceHook(dialogMenuItem *self)
|
||||
{
|
||||
Device **devs;
|
||||
|
||||
devs = deviceFind(self->prompt, DEVICE_TYPE_FLOPPY);
|
||||
if (devs)
|
||||
floppyDev = devs[0];
|
||||
return devs ? DITEM_LEAVE_MENU : DITEM_FAILURE;
|
||||
}
|
||||
|
||||
Boolean
|
||||
mediaInitFloppy(Device *dev)
|
||||
{
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: install.c,v 1.203 1997/12/29 20:07:17 jkh Exp $
|
||||
* $Id: install.c,v 1.204 1998/01/16 15:07:55 jkh Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -874,7 +874,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
|
||||
if (rootdev && RunningAsInit) {
|
||||
/* Next, create and/or mount the root device */
|
||||
sprintf(dname, "/dev/r%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/r%s", rootdev->name);
|
||||
if (!Fake && (!MakeDevChunk(rootdev, "/dev") || !file_readable(dname))) {
|
||||
msgConfirm("Unable to make device node for %s in /dev!\n"
|
||||
"The creation of filesystems will be aborted.", dname);
|
||||
@ -907,7 +907,7 @@ installFilesystems(dialogMenuItem *self)
|
||||
}
|
||||
|
||||
/* Switch to block device */
|
||||
sprintf(dname, "/dev/%sa", rootdev->disk->name);
|
||||
sprintf(dname, "/dev/%s", rootdev->name);
|
||||
if (Mount("/mnt", dname)) {
|
||||
msgConfirm("Unable to mount the root file system on %s! Giving up.", dname);
|
||||
return DITEM_FAILURE;
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
* This is probably the last program in the `sysinstall' line - the next
|
||||
* generation being essentially a complete rewrite.
|
||||
*
|
||||
* $Id: menus.c,v 1.151 1997/11/26 22:48:24 joerg Exp $
|
||||
* $Id: menus.c,v 1.152 1998/01/27 14:01:19 yokota Exp $
|
||||
*
|
||||
* Copyright (c) 1995
|
||||
* Jordan Hubbard. All rights reserved.
|
||||
@ -632,8 +632,8 @@ DMenu MenuNetworkDevice = {
|
||||
"If you're using SLIP over a serial device then the expectation is\n"
|
||||
"that you have a HARDWIRED connection.\n\n"
|
||||
"You can also install over a parallel port using a special \"laplink\"\n"
|
||||
"cable to another machine running a fairly recent (2.0R or later) version\n"
|
||||
"of FreeBSD.",
|
||||
"cable to another machine running a fairly recent (2.0R or later)\n"
|
||||
"version of FreeBSD.",
|
||||
"Press F1 to read network configuration manual",
|
||||
"network_device",
|
||||
{ { NULL } },
|
||||
|
||||
Loading…
Reference in New Issue
Block a user