Fix FC-Tape bugs caused in part by r345008.
The point of r345008 was to reset the Command Reference Number (CRN) in some situations where a device stayed in the topology, but had changed somehow. This can include moving from a switch connection to a direct connection or vice versa, or a device that temporarily goes away and comes back. (e.g. moving to a different switch port) There were a couple of bugs in that change: - We were reporting that a device had not changed whenever the Establish Image Pair bit was not set. That is not quite correct. Instead, if the Establish Image Pair bit stays the same (set or not), the device hasn't changed in that way. - We weren't setting PRLI Word0 in the port database when a new device arrived, so comparisons with the old value for the Establish Image Pair bit weren't really possible. So, make sure PRLI Word0 is set in the port database for new devices. - We were resetting the CRN whenever the Establish Image Pair bit was set for a device, even when the device had stayed the same and the value of the bit hadn't changed. Now, only reset the CRN for devices that have changed, not devices that sayed the same. The result of all of this was that if we had a single FC device on an FC port and it went away and came back, we would wind up correctly resetting the CRN. But, if we had multiple devices connected via a switch, and there was any change in one or more of those devices, all of the devices that stayed the same would also have their CRN values reset. The result, from a user standpoint, is that the tape drives, etc. would all start to time out commands and the initiator would send aborts. sys/dev/isp/isp.c: In isp_pdb_add_update(), look at whether the Establish Image Pair bit has changed as part of the check to determine whether a device is still the same. This was causing erroneous change notifications. Also, when creating a new port database entry, initialize the PRLI Word 0 values. sys/dev/isp/isp_freebsd.c: In isp_async(), in the changed/stayed case, instead of looking at the Establish Image Pair bit to determine whether to reset the CRN, look at the command value. (Changed vs. Stayed.) Only reset the CRN for devices that have changed. Sponsored by: Spectra Logic MFC after: 3 days
This commit is contained in:
parent
a9c7546a1d
commit
e26059ca18
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=348247
@ -3251,7 +3251,8 @@ isp_pdb_add_update(ispsoftc_t *isp, int chan, isp_pdb_t *pdb)
|
||||
if (lp->portid == pdb->portid &&
|
||||
lp->handle == pdb->handle &&
|
||||
lp->prli_word3 == pdb->prli_word3 &&
|
||||
((pdb->prli_word0 & PRLI_WD0_EST_IMAGE_PAIR) == 0)) {
|
||||
((pdb->prli_word0 & PRLI_WD0_EST_IMAGE_PAIR) ==
|
||||
(lp->prli_word0 & PRLI_WD0_EST_IMAGE_PAIR))) {
|
||||
if (lp->state != FC_PORTDB_STATE_NEW)
|
||||
lp->state = FC_PORTDB_STATE_VALID;
|
||||
isp_prt(isp, ISP_LOG_SANCFG,
|
||||
@ -3282,6 +3283,7 @@ isp_pdb_add_update(ispsoftc_t *isp, int chan, isp_pdb_t *pdb)
|
||||
lp->probational = 0;
|
||||
lp->state = FC_PORTDB_STATE_NEW;
|
||||
lp->portid = lp->new_portid = pdb->portid;
|
||||
lp->prli_word0 = lp->new_prli_word0 = pdb->prli_word0;
|
||||
lp->prli_word3 = lp->new_prli_word3 = pdb->prli_word3;
|
||||
lp->handle = pdb->handle;
|
||||
lp->port_wwn = wwpn;
|
||||
|
@ -3789,7 +3789,7 @@ isp_async(ispsoftc_t *isp, ispasync_t cmd, ...)
|
||||
xpt_async(AC_CONTRACT, fc->path, &ac);
|
||||
}
|
||||
|
||||
if ((lp->new_prli_word0 & PRLI_WD0_EST_IMAGE_PAIR) &&
|
||||
if ((cmd == ISPASYNC_DEV_CHANGED) &&
|
||||
(crn_reset_done == 0))
|
||||
isp_fcp_reset_crn(isp, bus, tgt, /*tgt_set*/ 1);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user