diff --git a/sbin/ffsinfo/ffsinfo.8 b/sbin/ffsinfo/ffsinfo.8
index 7c35857cf154..081213c4fa1e 100644
--- a/sbin/ffsinfo/ffsinfo.8
+++ b/sbin/ffsinfo/ffsinfo.8
@@ -39,14 +39,14 @@
 .\"
 .Dd September 8, 2000
 .Dt FSINFO 8
-.Os BSD 4.4
+.Os
 .Sh NAME
 .Nm ffsinfo
 .Nd dump all meta information of an existing ufs file system
 .Sh SYNOPSIS
-.Nm ffsinfo
+.Nm
 .Op Fl L
-.Op Fl g Ar cylinder group
+.Op Fl g Ar cylinder_group
 .Op Fl i Ar inode
 .Op Fl l Ar level
 .Op Fl o Ar outfile
@@ -63,34 +63,53 @@ Also expect the output file to be rather large.
 Up to 2 percent of the size of the specified filesystem is not uncommon.
 .Pp
 The following options are available:
-.\".Pp
 .Bl -tag -width indent
 .It Fl L
 Specifying this option skips the tests of the disklabel.
 This is done automatically, if the specified filename to dump is a plain file.
-.It Fl g Ar cylinder group
-This restricts the dump to infomation about this cylinder group only.
-Here 0 means the first cylinder group and -1 the last one.
+.It Fl g Ar cylinder_group
+This restricts the dump to information about this cylinder group only.
+Here
+.Ar 0
+means the first cylinder group and
+.Ar -1
+the last one.
 .It Fl i Ar inode
-This restrictes the dump to infomation about this particular inode only.
-Here the minimum acceptable inode is 2.
+This restricts the dump to information about this particular inode only.
+Here the minimum acceptable inode is
+.Ar 2 .
 If this option is omitted but a cylinder group is defined then only inodes
 within that cylinder group are dumped.
 .It Fl l Ar level
 The level of detail which will be dumped.
-This value defaults to 255 and is the bitwise and of the following table:
-.Bd -literal -offset left
-0x001 - initial superblock
-0x002 - superblock copys in each cylindergroup
-0x004 - cylinder group summary in initial cylinder group
-0x008 - cylinder group information
-0x010 - inode allocation bitmap
-0x020 - fragment allocation bitmap
-0x040 - cluster maps and summary
-0x080 - rotational layout tables
-0x100 - inode information
-0x200 - indirect block dump
-.Ed
+This value defaults to
+.Ar 255
+and is the
+.Dq bitwise or
+of the following table:
+.Pp
+.Bl -hang -width indent -compact
+.It Ar 0x001
+initial superblock
+.It Ar 0x002
+superblock copies in each cylinder group
+.It Ar 0x004
+cylinder group summary in initial cylinder group
+.It Ar 0x008
+cylinder group information
+.It Ar 0x010
+inode allocation bitmap
+.It Ar 0x020
+fragment allocation bitmap
+.It Ar 0x040
+cluster maps and summary
+.It Ar 0x080
+rotational layout tables
+.It Ar 0x100
+inode information
+.It Ar 0x200
+indirect block dump
+.El
 .It Fl o Ar outfile
 This allows to change the output filename where the dump is written to.
 The current default is
@@ -111,27 +130,24 @@ Do not try dumping a mounted file system, your system may panic and you will
 not be able to use the file system any longer.
 .Pp
 Also snapshots are handled like plain files.
-They should get a their own level to provide for independent control of the
+They should get their own level to provide for independent control of the
 amount of what gets dumped.
 It probably also makes sense to some extend to dump the snapshot as a
 filesystem.
 .Sh SEE ALSO
-.Xr vinum 8 ,
 .Xr disklabel 8 ,
+.Xr dumpfs 8 ,
 .Xr fsck 8 ,
+.Xr growfs 8 ,
 .Xr newfs 8 ,
 .Xr tunefs 8 ,
-.Xr growfs 8 ,
-.Xr dumpfs 8
-.\".Rs
-.\".Re
+.Xr vinum 8
 .Sh AUTHORS
-.An Christoph Herrmann Aq chm@FreeBSD.ORG
-.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.ORG
+.An Christoph Herrmann Aq chm@FreeBSD.org
+.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org
 .An The GROWFS team Aq growfs@Tomsoft.COM
 .Sh HISTORY
 The
 .Nm
-command appeared first in
-.Bx Free 
-5.0
+command first appeared in
+.Fx 5.0 .
diff --git a/sbin/growfs/growfs.8 b/sbin/growfs/growfs.8
index 2893d1e5e5ad..a9e78f77fc41 100644
--- a/sbin/growfs/growfs.8
+++ b/sbin/growfs/growfs.8
@@ -39,12 +39,12 @@
 .\"
 .Dd September 8, 2000
 .Dt GROWFS 8
-.Os BSD 4.4
+.Os
 .Sh NAME
 .Nm growfs
 .Nd grow size of an existing ufs file system
 .Sh SYNOPSIS
-.Nm growfs
+.Nm
 .Op Fl Ny
 .Op Fl s Ar size
 .Ar special
@@ -75,13 +75,12 @@ Use
 for other changes.
 .Pp
 The following options are available:
-.\".Pp
 .Bl -tag -width indent
 .It Fl N
 Cause the new file system parameters to be printed out without actually growing
 the file system.
 .It Fl y
-.Dq Expert mode
+.Dq Expert mode .
 Normally 
 .Nm 
 will ask you, if you took a backup of your data before and will do some tests
@@ -89,7 +88,7 @@ if
 .Ar special 
 is currently mounted or if there are any active snapshots on the filesystem
 specified.
-This will be supressed.
+This will be suppressed.
 So use this option with great care!
 .It Fl s Ar size
 The
@@ -111,7 +110,7 @@ up to 2GB if there is enough space in
 .Pa /dev/vinum/testvol .
 .Sh BUGS
 In some cases on
-.Bx Free
+.Fx
 3.x it is possible, that
 .Nm
 did not recognize exactly, if the file system is mounted or not and 
@@ -129,7 +128,7 @@ Almost everything works perfect with this relocated structure except the
 .Xr fsck 8
 utility.
 There is a patch available for
-.Xr fsck 8 ) .
+.Xr fsck 8 .
 For growing above certain limits it is essential to have some free blocks
 available in the first cylinder group.
 To avoid the relocation of that structure it is currently recommended to use
@@ -142,24 +141,20 @@ in the CYLINDER SUMMARY (internal cs) of the CYLINDER GROUP
 has enough blocks.
 As a rule of thumb for default filesystem parameters a block is needed for
 every 2 GB of total filesystem size.
-.Pp
 .Sh SEE ALSO
-.Xr vinum 8 ,
 .Xr disklabel 8 ,
+.Xr dumpfs 8 ,
+.Xr ffsinfo 8 ,
 .Xr fsck 8 ,
 .Xr newfs 8 ,
 .Xr tunefs 8 , 
-.Xr dumpfs 8 ,
-.Xr ffsinfo 8 
-.\".Rs
-.\".Re
+.Xr vinum 8
 .Sh AUTHORS
-.An Christoph Herrmann Aq chm@FreeBSD.ORG
-.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.ORG
+.An Christoph Herrmann Aq chm@FreeBSD.org
+.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org
 .An The GROWFS team Aq growfs@Tomsoft.COM
 .Sh HISTORY
 The
 .Nm
-command first appeared first in
-.Bx Free 
-5.0.
+command first appeared in
+.Fx 5.0 .