Cosmetic changes to comments:
* Bring source file references in line with the style used in GENERIC (i.e. src/sys/...). * Update outdated source file references. * Use proper URL syntax for URLs. * Update outdated URLs. PR: 15194 Submitted by: jedgar@fxp.org (Chris D. Faulhaber)
This commit is contained in:
sheldonh
parent
bbeaa3b557
commit
f4b5d58cc5
@ -820,7 +820,7 @@ pseudo-device ccd 4 #Concatenated disk driver
|
||||
# device is also untested. Use at your own risk.
|
||||
#
|
||||
# The option VINUMDEBUG must match the value set in CFLAGS
|
||||
# in /usr/src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# in src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# the following message from vinum(8):
|
||||
#
|
||||
# Can't get vinum config: Invalid argument
|
||||
@ -1310,7 +1310,7 @@ device oltr0 at isa?
|
||||
#
|
||||
# the current driver supports only PVC operations (no atm-arp, no multicast).
|
||||
# for more details, please read the original documents at
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/bsdatm/wucs.html
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
|
||||
#
|
||||
pseudo-device atm
|
||||
device en0
|
||||
@ -1341,7 +1341,7 @@ options NATM #native ATM
|
||||
# the problem.
|
||||
#
|
||||
# Beware! The addresses specified below are also hard-coded in
|
||||
# i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# src/sys/i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# must also change the values in the include file.
|
||||
#
|
||||
# pcm: PCM audio through various sound cards.
|
||||
@ -1349,7 +1349,7 @@ options NATM #native ATM
|
||||
# This has support for a large number of new audio cards, based on
|
||||
# CS423x, OPTi931, Yamaha OPL-SAx, and also for SB16, GusPnP.
|
||||
# For more information about this driver and supported cards,
|
||||
# see the pcm.4 man page and /sys/i386/isa/snd/CARDS.
|
||||
# see the pcm.4 man page.
|
||||
#
|
||||
# The flags of the device tells the device a bit more info about the
|
||||
# device that normally is obtained through the PnP interface.
|
||||
@ -1381,7 +1381,7 @@ options NATM #native ATM
|
||||
# options GUS_DMA
|
||||
# options GUS_IRQ
|
||||
#
|
||||
# The i386/isa/sound/sound.doc has more information.
|
||||
# The src/sys/i386/isa/sound/sound.doc has more information.
|
||||
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
@ -1562,7 +1562,7 @@ device stl0 at isa? port 0x2a0 irq 10
|
||||
device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
# You are unlikely to have the hardware for loran0 <phk@FreeBSD.org>
|
||||
device loran0 at isa? port ? irq 5
|
||||
# HOT1 Xilinx 6200 card (www.vcc.com)
|
||||
# HOT1 Xilinx 6200 card (http://www.vcc.com/)
|
||||
device xrpu0
|
||||
|
||||
#
|
||||
@ -1742,7 +1742,7 @@ controller miibus0
|
||||
# options OVERRIDE_MSP=1
|
||||
# options OVERRIDE_DBX=1
|
||||
# These options can be used to override the auto detection
|
||||
# The current values for xxx are found in /usr/src/sys/pci/brooktree848.c
|
||||
# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
|
||||
# Using sysctl(8) run-time overrides on a per-card basis can be made
|
||||
#
|
||||
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
|
||||
@ -2266,7 +2266,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||||
# Compaq are actually DPT controllers.
|
||||
#
|
||||
# See sys/dev/dpt for debugging and other subtle options.
|
||||
# See src/sys/dev/dpt for debugging and other subtle options.
|
||||
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||||
# instruments are enabled. The tools in
|
||||
# /usr/sbin/dpt_* assume these to be enabled.
|
||||
|
||||
@ -820,7 +820,7 @@ pseudo-device ccd 4 #Concatenated disk driver
|
||||
# device is also untested. Use at your own risk.
|
||||
#
|
||||
# The option VINUMDEBUG must match the value set in CFLAGS
|
||||
# in /usr/src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# in src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# the following message from vinum(8):
|
||||
#
|
||||
# Can't get vinum config: Invalid argument
|
||||
@ -1310,7 +1310,7 @@ device oltr0 at isa?
|
||||
#
|
||||
# the current driver supports only PVC operations (no atm-arp, no multicast).
|
||||
# for more details, please read the original documents at
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/bsdatm/wucs.html
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
|
||||
#
|
||||
pseudo-device atm
|
||||
device en0
|
||||
@ -1341,7 +1341,7 @@ options NATM #native ATM
|
||||
# the problem.
|
||||
#
|
||||
# Beware! The addresses specified below are also hard-coded in
|
||||
# i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# src/sys/i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# must also change the values in the include file.
|
||||
#
|
||||
# pcm: PCM audio through various sound cards.
|
||||
@ -1349,7 +1349,7 @@ options NATM #native ATM
|
||||
# This has support for a large number of new audio cards, based on
|
||||
# CS423x, OPTi931, Yamaha OPL-SAx, and also for SB16, GusPnP.
|
||||
# For more information about this driver and supported cards,
|
||||
# see the pcm.4 man page and /sys/i386/isa/snd/CARDS.
|
||||
# see the pcm.4 man page.
|
||||
#
|
||||
# The flags of the device tells the device a bit more info about the
|
||||
# device that normally is obtained through the PnP interface.
|
||||
@ -1381,7 +1381,7 @@ options NATM #native ATM
|
||||
# options GUS_DMA
|
||||
# options GUS_IRQ
|
||||
#
|
||||
# The i386/isa/sound/sound.doc has more information.
|
||||
# The src/sys/i386/isa/sound/sound.doc has more information.
|
||||
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
@ -1562,7 +1562,7 @@ device stl0 at isa? port 0x2a0 irq 10
|
||||
device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
# You are unlikely to have the hardware for loran0 <phk@FreeBSD.org>
|
||||
device loran0 at isa? port ? irq 5
|
||||
# HOT1 Xilinx 6200 card (www.vcc.com)
|
||||
# HOT1 Xilinx 6200 card (http://www.vcc.com/)
|
||||
device xrpu0
|
||||
|
||||
#
|
||||
@ -1742,7 +1742,7 @@ controller miibus0
|
||||
# options OVERRIDE_MSP=1
|
||||
# options OVERRIDE_DBX=1
|
||||
# These options can be used to override the auto detection
|
||||
# The current values for xxx are found in /usr/src/sys/pci/brooktree848.c
|
||||
# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
|
||||
# Using sysctl(8) run-time overrides on a per-card basis can be made
|
||||
#
|
||||
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
|
||||
@ -2266,7 +2266,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||||
# Compaq are actually DPT controllers.
|
||||
#
|
||||
# See sys/dev/dpt for debugging and other subtle options.
|
||||
# See src/sys/dev/dpt for debugging and other subtle options.
|
||||
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||||
# instruments are enabled. The tools in
|
||||
# /usr/sbin/dpt_* assume these to be enabled.
|
||||
|
||||
@ -820,7 +820,7 @@ pseudo-device ccd 4 #Concatenated disk driver
|
||||
# device is also untested. Use at your own risk.
|
||||
#
|
||||
# The option VINUMDEBUG must match the value set in CFLAGS
|
||||
# in /usr/src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# in src/sbin/vinum/Makefile. Failure to do so will result in
|
||||
# the following message from vinum(8):
|
||||
#
|
||||
# Can't get vinum config: Invalid argument
|
||||
@ -1310,7 +1310,7 @@ device oltr0 at isa?
|
||||
#
|
||||
# the current driver supports only PVC operations (no atm-arp, no multicast).
|
||||
# for more details, please read the original documents at
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/bsdatm/wucs.html
|
||||
# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
|
||||
#
|
||||
pseudo-device atm
|
||||
device en0
|
||||
@ -1341,7 +1341,7 @@ options NATM #native ATM
|
||||
# the problem.
|
||||
#
|
||||
# Beware! The addresses specified below are also hard-coded in
|
||||
# i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# src/sys/i386/isa/sound/sound_config.h. If you change the values here, you
|
||||
# must also change the values in the include file.
|
||||
#
|
||||
# pcm: PCM audio through various sound cards.
|
||||
@ -1349,7 +1349,7 @@ options NATM #native ATM
|
||||
# This has support for a large number of new audio cards, based on
|
||||
# CS423x, OPTi931, Yamaha OPL-SAx, and also for SB16, GusPnP.
|
||||
# For more information about this driver and supported cards,
|
||||
# see the pcm.4 man page and /sys/i386/isa/snd/CARDS.
|
||||
# see the pcm.4 man page.
|
||||
#
|
||||
# The flags of the device tells the device a bit more info about the
|
||||
# device that normally is obtained through the PnP interface.
|
||||
@ -1381,7 +1381,7 @@ options NATM #native ATM
|
||||
# options GUS_DMA
|
||||
# options GUS_IRQ
|
||||
#
|
||||
# The i386/isa/sound/sound.doc has more information.
|
||||
# The src/sys/i386/isa/sound/sound.doc has more information.
|
||||
|
||||
# Controls all "VOXWARE" driver sound devices. See Luigi's driver
|
||||
# below for an alternate which may work better for some cards.
|
||||
@ -1562,7 +1562,7 @@ device stl0 at isa? port 0x2a0 irq 10
|
||||
device stli0 at isa? port 0x2a0 iomem 0xcc000 flags 23 iosiz 0x1000
|
||||
# You are unlikely to have the hardware for loran0 <phk@FreeBSD.org>
|
||||
device loran0 at isa? port ? irq 5
|
||||
# HOT1 Xilinx 6200 card (www.vcc.com)
|
||||
# HOT1 Xilinx 6200 card (http://www.vcc.com/)
|
||||
device xrpu0
|
||||
|
||||
#
|
||||
@ -1742,7 +1742,7 @@ controller miibus0
|
||||
# options OVERRIDE_MSP=1
|
||||
# options OVERRIDE_DBX=1
|
||||
# These options can be used to override the auto detection
|
||||
# The current values for xxx are found in /usr/src/sys/pci/brooktree848.c
|
||||
# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
|
||||
# Using sysctl(8) run-time overrides on a per-card basis can be made
|
||||
#
|
||||
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
|
||||
@ -2266,7 +2266,7 @@ options VM_KMEM_SIZE_SCALE
|
||||
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||||
# Compaq are actually DPT controllers.
|
||||
#
|
||||
# See sys/dev/dpt for debugging and other subtle options.
|
||||
# See src/sys/dev/dpt for debugging and other subtle options.
|
||||
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||||
# instruments are enabled. The tools in
|
||||
# /usr/sbin/dpt_* assume these to be enabled.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user