Add some initial board support for the AR934x and the Qualcomm Atheros
DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
This commit is contained in:
Adrian Chadd
parent
ea5f837ece
commit
f5937ee8e6
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=253512
124
sys/mips/conf/AR934X_BASE
Normal file
124
sys/mips/conf/AR934X_BASE
Normal file
@ -0,0 +1,124 @@
|
||||
#
|
||||
# AR91XX -- Kernel configuration base file for the Atheros AR913x SoC.
|
||||
#
|
||||
# This file (and the hints file accompanying it) are not designed to be
|
||||
# used by themselves. Instead, users of this file should create a kernel
|
||||
# config file which includes this file (which gets the basic hints), then
|
||||
# override the default options (adding devices as needed) and adding
|
||||
# hints as needed (for example, the GPIO and LAN PHY.)
|
||||
#
|
||||
# $FreeBSD$
|
||||
#
|
||||
|
||||
machine mips mips
|
||||
ident AR934X_BASE
|
||||
cpu CPU_MIPS4KC
|
||||
makeoptions KERNLOADADDR=0x80050000
|
||||
options HZ=1000
|
||||
|
||||
files "../atheros/files.ar71xx"
|
||||
hints "AR934X_BASE.hints"
|
||||
|
||||
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
# makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_ahb hwpmc"
|
||||
makeoptions MODULES_OVERRIDE=""
|
||||
|
||||
options DDB
|
||||
options KDB
|
||||
options ALQ
|
||||
|
||||
options SCHED_4BSD #4BSD scheduler
|
||||
options INET #InterNETworking
|
||||
#options INET6 #InterNETworking
|
||||
#options NFSCL #Network Filesystem Client
|
||||
options PSEUDOFS #Pseudo-filesystem framework
|
||||
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
|
||||
|
||||
# Don't include the SCSI/CAM strings in the default build
|
||||
options SCSI_NO_SENSE_STRINGS
|
||||
options SCSI_NO_OP_STRINGS
|
||||
|
||||
# .. And no sysctl strings
|
||||
options NO_SYSCTL_DESCR
|
||||
|
||||
# Limit IO size
|
||||
options NBUF=128
|
||||
|
||||
# Limit UMTX hash size
|
||||
# options UMTX_NUM_CHAINS=64
|
||||
|
||||
# PMC
|
||||
#options HWPMC_HOOKS
|
||||
#device hwpmc
|
||||
#device hwpmc_mips24k
|
||||
|
||||
# options NFS_LEGACYRPC
|
||||
# Debugging for use in -current
|
||||
#options INVARIANTS
|
||||
#options INVARIANT_SUPPORT
|
||||
#options WITNESS
|
||||
#options WITNESS_SKIPSPIN
|
||||
options FFS #Berkeley Fast Filesystem
|
||||
#options SOFTUPDATES #Enable FFS soft updates support
|
||||
#options UFS_ACL #Support for access control lists
|
||||
#options UFS_DIRHASH #Improve performance on big directories
|
||||
options NO_FFS_SNAPSHOT # We don't require snapshot support
|
||||
|
||||
# Wireless NIC cards
|
||||
options IEEE80211_DEBUG
|
||||
options IEEE80211_SUPPORT_MESH
|
||||
options IEEE80211_SUPPORT_TDMA
|
||||
options IEEE80211_SUPPORT_SUPERG
|
||||
options IEEE80211_ALQ # 802.11 ALQ logging support
|
||||
device wlan # 802.11 support
|
||||
device wlan_wep # 802.11 WEP support
|
||||
device wlan_ccmp # 802.11 CCMP support
|
||||
device wlan_tkip # 802.11 TKIP support
|
||||
device wlan_xauth # 802.11 hostap support
|
||||
|
||||
# ath(4)
|
||||
device ath # Atheros network device
|
||||
device ath_rate_sample
|
||||
device ath_ahb # Atheros host bus glue
|
||||
options ATH_DEBUG
|
||||
options ATH_DIAGAPI
|
||||
option ATH_ENABLE_11N
|
||||
option AH_DEBUG_ALQ
|
||||
|
||||
#device ath_hal
|
||||
device ath_ar9300 # AR9330 HAL; no need for the others
|
||||
option AH_DEBUG
|
||||
option AH_SUPPORT_AR5416 # 11n HAL support
|
||||
option AH_SUPPORT_AR9340 # Chipset support
|
||||
option AH_DEBUG_ALQ
|
||||
option AH_AR5416_INTERRUPT_MITIGATION
|
||||
|
||||
device mii
|
||||
device arge
|
||||
|
||||
device usb
|
||||
options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
|
||||
options USB_DEBUG
|
||||
options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this
|
||||
device ehci
|
||||
|
||||
device scbus
|
||||
device umass
|
||||
device da
|
||||
|
||||
device spibus
|
||||
device ar71xx_spi
|
||||
device mx25l
|
||||
device ar71xx_wdog
|
||||
|
||||
device uart
|
||||
device uart_ar71xx
|
||||
|
||||
device loop
|
||||
device ether
|
||||
device md
|
||||
device bpf
|
||||
device random
|
||||
device if_bridge
|
||||
device gpio
|
||||
device gpioled
|
||||
61
sys/mips/conf/AR934X_BASE.hints
Normal file
61
sys/mips/conf/AR934X_BASE.hints
Normal file
@ -0,0 +1,61 @@
|
||||
# This file (and the kernel config file accompanying it) are not designed
|
||||
# to be used by themselves. Instead, users of this file should create a
|
||||
# kernel # config file which includes this file (which gets the basic hints),
|
||||
# then override the default options (adding devices as needed) and adding
|
||||
# hints as needed (for example, the GPIO and LAN PHY.)
|
||||
|
||||
# $FreeBSD$
|
||||
|
||||
hint.apb.0.at="nexus0"
|
||||
hint.apb.0.irq=4
|
||||
|
||||
# uart0
|
||||
hint.uart.0.at="apb0"
|
||||
# NB: This isn't an ns8250 UART
|
||||
hint.uart.0.maddr=0x18020003
|
||||
hint.uart.0.msize=0x18
|
||||
hint.uart.0.irq=3
|
||||
|
||||
#ehci - note the 0x100 offset for the AR913x/AR724x
|
||||
hint.ehci.0.at="nexus0"
|
||||
hint.ehci.0.maddr=0x1b000100
|
||||
hint.ehci.0.msize=0x00001000
|
||||
hint.ehci.0.irq=1
|
||||
|
||||
hint.arge.0.at="nexus0"
|
||||
hint.arge.0.maddr=0x19000000
|
||||
hint.arge.0.msize=0x1000
|
||||
hint.arge.0.irq=2
|
||||
|
||||
hint.arge.1.at="nexus0"
|
||||
hint.arge.1.maddr=0x1a000000
|
||||
hint.arge.1.msize=0x1000
|
||||
hint.arge.1.irq=3
|
||||
|
||||
# XXX The ath device hangs off of the AHB, rather than the Nexus.
|
||||
hint.ath.0.at="nexus0"
|
||||
hint.ath.0.maddr=0x18100000
|
||||
hint.ath.0.msize=0x20000
|
||||
hint.ath.0.irq=0
|
||||
hint.ath.0.vendor_id=0x168c
|
||||
hint.ath.0.device_id=0x0031
|
||||
# Set this to define where the ath calibration data
|
||||
# should be fetched from in physical memory.
|
||||
# hint.ath.0.eepromaddr=0x1fff1000
|
||||
|
||||
# SPI flash
|
||||
hint.spi.0.at="nexus0"
|
||||
hint.spi.0.maddr=0x1f000000
|
||||
hint.spi.0.msize=0x10
|
||||
|
||||
hint.mx25l.0.at="spibus0"
|
||||
hint.mx25l.0.cs=0
|
||||
|
||||
# Watchdog
|
||||
hint.ar71xx_wdog.0.at="nexus0"
|
||||
|
||||
# The GPIO function and pin mask is configured per-board
|
||||
hint.gpio.0.at="apb0"
|
||||
hint.gpio.0.maddr=0x18040000
|
||||
hint.gpio.0.msize=0x1000
|
||||
hint.gpio.0.irq=2
|
||||
46
sys/mips/conf/DB120
Normal file
46
sys/mips/conf/DB120
Normal file
@ -0,0 +1,46 @@
|
||||
#
|
||||
# DB120 - the AR9344 SoC reference design
|
||||
#
|
||||
# $FreeBSD$
|
||||
#
|
||||
|
||||
# Include the default AR934x parameters
|
||||
include "AR934X_BASE"
|
||||
|
||||
ident DB120
|
||||
|
||||
# Override hints with board values
|
||||
hints "DB120.hints"
|
||||
|
||||
# Force the board memory - the base DB120 has 128MB RAM
|
||||
options AR71XX_REALMEM=(32*1024*1024)
|
||||
|
||||
# i2c GPIO bus
|
||||
#device gpioiic
|
||||
#device iicbb
|
||||
#device iicbus
|
||||
#device iic
|
||||
|
||||
# Options required for miiproxy and mdiobus
|
||||
options ARGE_MDIO # Export an MDIO bus separate from arge
|
||||
device miiproxy # MDIO bus <-> MII PHY rendezvous
|
||||
|
||||
device etherswitch
|
||||
device arswitch
|
||||
|
||||
# read MSDOS formatted disks - USB
|
||||
#options MSDOSFS
|
||||
|
||||
# Enable the uboot environment stuff rather then the
|
||||
# redboot stuff.
|
||||
options AR71XX_ENV_UBOOT
|
||||
|
||||
# uzip - to boot natively from flash
|
||||
device geom_uncompress
|
||||
options GEOM_UNCOMPRESS
|
||||
|
||||
# Used for the static uboot partition map
|
||||
device geom_map
|
||||
|
||||
# Boot off of the rootfs, as defined in the geom_map setup.
|
||||
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
|
||||
3
sys/mips/conf/DB120.hints
Normal file
3
sys/mips/conf/DB120.hints
Normal file
@ -0,0 +1,3 @@
|
||||
# $FreeBSD$
|
||||
|
||||
# This is a placeholder until the hardware support is complete.
|
||||
Loading…
Reference in New Issue
Block a user