diff --git a/sys/dev/atkbdc/psm.c b/sys/dev/atkbdc/psm.c index b4b27a2e2841..2152818b4a58 100644 --- a/sys/dev/atkbdc/psm.c +++ b/sys/dev/atkbdc/psm.c @@ -50,10 +50,10 @@ * - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'... * - 14, 30 November 1996. Uses `kbdio.c'. * - 13 December 1996. Uses queuing version of `kbdio.c'. - * - January/February 1997. Tweaked probe logic for + * - January/February 1997. Tweaked probe logic for * HiNote UltraII/Latitude/Armada laptops. * - 30 July 1997. Added APM support. - * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX). + * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX). * Improved sync check logic. * Vendor specific support routines. */ @@ -97,158 +97,159 @@ __FBSDID("$FreeBSD$"); /* debugging */ #ifndef PSM_DEBUG -#define PSM_DEBUG 0 /* +#define PSM_DEBUG 0 /* * logging: 0: none, 1: brief, 2: verbose * 3: sync errors, 4: all packets */ #endif -#define VLOG(level, args) \ -do { \ - if (verbose >= level) \ - log args; \ +#define VLOG(level, args) do { \ + if (verbose >= level) \ + log args; \ } while (0) #ifndef PSM_INPUT_TIMEOUT -#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */ +#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */ #endif #ifndef PSM_TAP_TIMEOUT -#define PSM_TAP_TIMEOUT 125000 +#define PSM_TAP_TIMEOUT 125000 #endif #ifndef PSM_TAP_THRESHOLD -#define PSM_TAP_THRESHOLD 25 +#define PSM_TAP_THRESHOLD 25 #endif /* end of driver specific options */ -#define PSMCPNP_DRIVER_NAME "psmcpnp" +#define PSMCPNP_DRIVER_NAME "psmcpnp" /* input queue */ -#define PSM_BUFSIZE 960 -#define PSM_SMALLBUFSIZE 240 +#define PSM_BUFSIZE 960 +#define PSM_SMALLBUFSIZE 240 /* operation levels */ -#define PSM_LEVEL_BASE 0 -#define PSM_LEVEL_STANDARD 1 -#define PSM_LEVEL_NATIVE 2 -#define PSM_LEVEL_MIN PSM_LEVEL_BASE -#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE +#define PSM_LEVEL_BASE 0 +#define PSM_LEVEL_STANDARD 1 +#define PSM_LEVEL_NATIVE 2 +#define PSM_LEVEL_MIN PSM_LEVEL_BASE +#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE /* Logitech PS2++ protocol */ -#define MOUSE_PS2PLUS_CHECKBITS(b) \ - ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f)) -#define MOUSE_PS2PLUS_PACKET_TYPE(b) \ - (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4)) +#define MOUSE_PS2PLUS_CHECKBITS(b) \ + ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f)) +#define MOUSE_PS2PLUS_PACKET_TYPE(b) \ + (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4)) /* some macros */ -#define PSM_UNIT(dev) (minor(dev) >> 1) -#define PSM_NBLOCKIO(dev) (minor(dev) & 1) -#define PSM_MKMINOR(unit,block) (((unit) << 1) | ((block) ? 0:1)) +#define PSM_UNIT(dev) (minor(dev) >> 1) +#define PSM_NBLOCKIO(dev) (minor(dev) & 1) +#define PSM_MKMINOR(unit,block) (((unit) << 1) | ((block) ? 0:1)) /* ring buffer */ typedef struct ringbuf { - int count; /* # of valid elements in the buffer */ - int head; /* head pointer */ - int tail; /* tail poiner */ - unsigned char buf[PSM_BUFSIZE]; + int count; /* # of valid elements in the buffer */ + int head; /* head pointer */ + int tail; /* tail poiner */ + u_char buf[PSM_BUFSIZE]; } ringbuf_t; /* data buffer */ typedef struct packetbuf { - unsigned char ipacket[16]; /* interim input buffer */ - int inputbytes; /* # of bytes in the input buffer */ + u_char ipacket[16]; /* interim input buffer */ + int inputbytes; /* # of bytes in the input buffer */ } packetbuf_t; #ifndef PSM_PACKETQUEUE -#define PSM_PACKETQUEUE 128 +#define PSM_PACKETQUEUE 128 #endif typedef struct synapticsinfo { - struct sysctl_ctx_list sysctl_ctx; - struct sysctl_oid *sysctl_tree; - int directional_scrolls; - int low_speed_threshold; - int min_movement; - int squelch_level; + struct sysctl_ctx_list sysctl_ctx; + struct sysctl_oid *sysctl_tree; + int directional_scrolls; + int low_speed_threshold; + int min_movement; + int squelch_level; } synapticsinfo_t; /* driver control block */ struct psm_softc { /* Driver status information */ - int unit; - struct selinfo rsel; /* Process selecting for Input */ - unsigned char state; /* Mouse driver state */ - int config; /* driver configuration flags */ - int flags; /* other flags */ - KBDC kbdc; /* handle to access the keyboard controller */ - struct resource *intr; /* IRQ resource */ - void *ih; /* interrupt handle */ - mousehw_t hw; /* hardware information */ - synapticshw_t synhw; /* Synaptics-specific hardware information */ - synapticsinfo_t syninfo; /* Synaptics-specific configuration */ - mousemode_t mode; /* operation mode */ - mousemode_t dflt_mode; /* default operation mode */ - mousestatus_t status; /* accumulated mouse movement */ - ringbuf_t queue; /* mouse status queue */ - packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */ - int pqueue_start; /* start of data in queue */ - int pqueue_end; /* end of data in queue */ - int button; /* the latest button state */ - int xold; /* previous absolute X position */ - int yold; /* previous absolute Y position */ - int xaverage; /* average X position */ - int yaverage; /* average Y position */ - int squelch; /* level to filter movement data at low speed */ - int zmax; /* maximum pressure value for touchpads */ - int syncerrors; /* # of bytes discarded searching for sync */ - int pkterrors; /* # of packets failed during quaranteen. */ - struct timeval inputtimeout; - struct timeval lastsoftintr; /* time of last soft interrupt */ - struct timeval lastinputerr; /* time last sync error happened */ - struct timeval taptimeout; /* tap timeout for touchpads */ - int watchdog; /* watchdog timer flag */ - struct callout_handle callout; /* watchdog timer call out */ - struct callout_handle softcallout; /* buffer timer call out */ - struct cdev *dev; - struct cdev *bdev; - int lasterr; - int cmdcount; + int unit; + struct selinfo rsel; /* Process selecting for Input */ + u_char state; /* Mouse driver state */ + int config; /* driver configuration flags */ + int flags; /* other flags */ + KBDC kbdc; /* handle to access kbd controller */ + struct resource *intr; /* IRQ resource */ + void *ih; /* interrupt handle */ + mousehw_t hw; /* hardware information */ + synapticshw_t synhw; /* Synaptics hardware information */ + synapticsinfo_t syninfo; /* Synaptics configuration */ + mousemode_t mode; /* operation mode */ + mousemode_t dflt_mode; /* default operation mode */ + mousestatus_t status; /* accumulated mouse movement */ + ringbuf_t queue; /* mouse status queue */ + packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */ + int pqueue_start; /* start of data in queue */ + int pqueue_end; /* end of data in queue */ + int button; /* the latest button state */ + int xold; /* previous absolute X position */ + int yold; /* previous absolute Y position */ + int xaverage; /* average X position */ + int yaverage; /* average Y position */ + int squelch; /* level to filter movement at low speed */ + int zmax; /* maximum pressure value for touchpads */ + int syncerrors; /* # of bytes discarded to synchronize */ + int pkterrors; /* # of packets failed during quaranteen. */ + struct timeval inputtimeout; + struct timeval lastsoftintr; /* time of last soft interrupt */ + struct timeval lastinputerr; /* time last sync error happened */ + struct timeval taptimeout; /* tap timeout for touchpads */ + int watchdog; /* watchdog timer flag */ + struct callout_handle callout; /* watchdog timer call out */ + struct callout_handle softcallout; /* buffer timer call out */ + struct cdev *dev; + struct cdev *bdev; + int lasterr; + int cmdcount; }; static devclass_t psm_devclass; -#define PSM_SOFTC(unit) ((struct psm_softc*)devclass_get_softc(psm_devclass, unit)) +#define PSM_SOFTC(unit) \ + ((struct psm_softc*)devclass_get_softc(psm_devclass, unit)) /* driver state flags (state) */ -#define PSM_VALID 0x80 -#define PSM_OPEN 1 /* Device is open */ -#define PSM_ASLP 2 /* Waiting for mouse data */ -#define PSM_SOFTARMED 4 /* Software interrupt armed */ -#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */ +#define PSM_VALID 0x80 +#define PSM_OPEN 1 /* Device is open */ +#define PSM_ASLP 2 /* Waiting for mouse data */ +#define PSM_SOFTARMED 4 /* Software interrupt armed */ +#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */ /* driver configuration flags (config) */ -#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */ -#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */ -#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */ -#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */ -#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */ -#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */ -#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */ -#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */ -#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */ -#define PSM_CONFIG_SYNCHACK 0x8000 /* enable `out-of-sync' hack */ +#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */ +#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */ +#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */ +#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */ +#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */ +#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */ +#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */ +#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */ +#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */ +#define PSM_CONFIG_SYNCHACK 0x8000 /* enable `out-of-sync' hack */ -#define PSM_CONFIG_FLAGS (PSM_CONFIG_RESOLUTION \ - | PSM_CONFIG_ACCEL \ - | PSM_CONFIG_NOCHECKSYNC \ - | PSM_CONFIG_SYNCHACK \ - | PSM_CONFIG_NOIDPROBE \ - | PSM_CONFIG_NORESET \ - | PSM_CONFIG_FORCETAP \ - | PSM_CONFIG_IGNPORTERROR \ - | PSM_CONFIG_HOOKRESUME \ - | PSM_CONFIG_INITAFTERSUSPEND) +#define PSM_CONFIG_FLAGS \ + (PSM_CONFIG_RESOLUTION | \ + PSM_CONFIG_ACCEL | \ + PSM_CONFIG_NOCHECKSYNC | \ + PSM_CONFIG_SYNCHACK | \ + PSM_CONFIG_NOIDPROBE | \ + PSM_CONFIG_NORESET | \ + PSM_CONFIG_FORCETAP | \ + PSM_CONFIG_IGNPORTERROR | \ + PSM_CONFIG_HOOKRESUME | \ + PSM_CONFIG_INITAFTERSUSPEND) /* other flags (flags) */ -#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */ +#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */ /* Tunables */ static int synaptics_support = 0; @@ -258,120 +259,129 @@ static int verbose = PSM_DEBUG; TUNABLE_INT("debug.psm.loglevel", &verbose); /* for backward compatibility */ -#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t) -#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t) -#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t) +#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t) +#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t) +#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t) typedef struct old_mousehw { - int buttons; - int iftype; - int type; - int hwid; + int buttons; + int iftype; + int type; + int hwid; } old_mousehw_t; typedef struct old_mousemode { - int protocol; - int rate; - int resolution; - int accelfactor; + int protocol; + int rate; + int resolution; + int accelfactor; } old_mousemode_t; /* packet formatting function */ -typedef int packetfunc_t(struct psm_softc *, unsigned char *, - int *, int, mousestatus_t *); +typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int, + mousestatus_t *); /* function prototypes */ -static void psmidentify(driver_t *, device_t); -static int psmprobe(device_t); -static int psmattach(device_t); -static int psmdetach(device_t); -static int psmresume(device_t); +static void psmidentify(driver_t *, device_t); +static int psmprobe(device_t); +static int psmattach(device_t); +static int psmdetach(device_t); +static int psmresume(device_t); -static d_open_t psmopen; -static d_close_t psmclose; -static d_read_t psmread; -static d_write_t psmwrite; -static d_ioctl_t psmioctl; -static d_poll_t psmpoll; +static d_open_t psmopen; +static d_close_t psmclose; +static d_read_t psmread; +static d_write_t psmwrite; +static d_ioctl_t psmioctl; +static d_poll_t psmpoll; -static int enable_aux_dev(KBDC); -static int disable_aux_dev(KBDC); -static int get_mouse_status(KBDC, int *, int, int); -static int get_aux_id(KBDC); -static int set_mouse_sampling_rate(KBDC, int); -static int set_mouse_scaling(KBDC, int); -static int set_mouse_resolution(KBDC, int); -static int set_mouse_mode(KBDC); -static int get_mouse_buttons(KBDC); -static int is_a_mouse(int); -static void recover_from_error(KBDC); -static int restore_controller(KBDC, int); -static int doinitialize(struct psm_softc *, mousemode_t *); -static int doopen(struct psm_softc *, int); -static int reinitialize(struct psm_softc *, int); -static char *model_name(int); -static void psmsoftintr(void *); -static void psmintr(void *); -static void psmtimeout(void *); -static int timeelapsed(const struct timeval *, - int, int, const struct timeval *); -static void dropqueue(struct psm_softc *); -static void flushpackets(struct psm_softc *); +static int enable_aux_dev(KBDC); +static int disable_aux_dev(KBDC); +static int get_mouse_status(KBDC, int *, int, int); +static int get_aux_id(KBDC); +static int set_mouse_sampling_rate(KBDC, int); +static int set_mouse_scaling(KBDC, int); +static int set_mouse_resolution(KBDC, int); +static int set_mouse_mode(KBDC); +static int get_mouse_buttons(KBDC); +static int is_a_mouse(int); +static void recover_from_error(KBDC); +static int restore_controller(KBDC, int); +static int doinitialize(struct psm_softc *, mousemode_t *); +static int doopen(struct psm_softc *, int); +static int reinitialize(struct psm_softc *, int); +static char *model_name(int); +static void psmsoftintr(void *); +static void psmintr(void *); +static void psmtimeout(void *); +static int timeelapsed(const struct timeval *, int, int, + const struct timeval *); +static void dropqueue(struct psm_softc *); +static void flushpackets(struct psm_softc *); +static void proc_mmanplus(struct psm_softc *, packetbuf_t *, + mousestatus_t *, int *, int *, int *); +static int proc_synaptics(struct psm_softc *, packetbuf_t *, + mousestatus_t *, int *, int *, int *); +static void proc_versapad(struct psm_softc *, packetbuf_t *, + mousestatus_t *, int *, int *, int *); +static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *, + u_char *); /* vendor specific features */ -typedef int probefunc_t(struct psm_softc *); +typedef int probefunc_t(struct psm_softc *); -static int mouse_id_proc1(KBDC, int, int, int *); -static int mouse_ext_command(KBDC, int); -static probefunc_t enable_groller; -static probefunc_t enable_gmouse; -static probefunc_t enable_aglide; -static probefunc_t enable_kmouse; -static probefunc_t enable_msexplorer; -static probefunc_t enable_msintelli; -static probefunc_t enable_4dmouse; -static probefunc_t enable_4dplus; -static probefunc_t enable_mmanplus; -static probefunc_t enable_synaptics; -static probefunc_t enable_versapad; -static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *, unsigned char *); +static int mouse_id_proc1(KBDC, int, int, int *); +static int mouse_ext_command(KBDC, int); + +static probefunc_t enable_groller; +static probefunc_t enable_gmouse; +static probefunc_t enable_aglide; +static probefunc_t enable_kmouse; +static probefunc_t enable_msexplorer; +static probefunc_t enable_msintelli; +static probefunc_t enable_4dmouse; +static probefunc_t enable_4dplus; +static probefunc_t enable_mmanplus; +static probefunc_t enable_synaptics; +static probefunc_t enable_versapad; static struct { - int model; - unsigned char syncmask; - int packetsize; - probefunc_t *probefunc; + int model; + u_char syncmask; + int packetsize; + probefunc_t *probefunc; } vendortype[] = { - /* - * WARNING: the order of probe is very important. Don't mess it - * unless you know what you are doing. - */ - { MOUSE_MODEL_NET, /* Genius NetMouse */ - 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse, }, - { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */ - 0xc8, 6, enable_groller, }, - { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */ - 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus, }, - { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */ - 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer, }, - { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */ - 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse, }, - { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */ - 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus, }, - { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */ - 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli, }, - { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */ - 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide, }, - { MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */ - 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse, }, - { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */ - 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad, }, - { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */ - 0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics, }, - { MOUSE_MODEL_GENERIC, - 0xc0, MOUSE_PS2_PACKETSIZE, NULL, }, + /* + * WARNING: the order of probe is very important. Don't mess it + * unless you know what you are doing. + */ + { MOUSE_MODEL_NET, /* Genius NetMouse */ + 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse }, + { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */ + 0xc8, 6, enable_groller }, + { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */ + 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus }, + { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */ + 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer }, + { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */ + 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse }, + { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */ + 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus }, + { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */ + 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli }, + { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */ + 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide }, + { MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */ + 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse }, + { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */ + 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad }, + { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */ + 0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics }, + { MOUSE_MODEL_GENERIC, + 0xc0, MOUSE_PS2_PACKETSIZE, NULL }, }; -#define GENERIC_MOUSE_ENTRY ((sizeof(vendortype) / sizeof(*vendortype)) - 1) +#define GENERIC_MOUSE_ENTRY \ + ((sizeof(vendortype) / sizeof(*vendortype)) - 1) /* device driver declarateion */ static device_method_t psm_methods[] = { @@ -386,12 +396,11 @@ static device_method_t psm_methods[] = { }; static driver_t psm_driver = { - PSM_DRIVER_NAME, - psm_methods, - sizeof(struct psm_softc), + PSM_DRIVER_NAME, + psm_methods, + sizeof(struct psm_softc), }; - static struct cdevsw psm_cdevsw = { .d_version = D_VERSION, .d_flags = D_NEEDGIANT, @@ -408,123 +417,123 @@ static struct cdevsw psm_cdevsw = { static int enable_aux_dev(KBDC kbdc) { - int res; + int res; - res = send_aux_command(kbdc, PSMC_ENABLE_DEV); - VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res)); + res = send_aux_command(kbdc, PSMC_ENABLE_DEV); + VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res)); - return (res == PSM_ACK); + return (res == PSM_ACK); } static int disable_aux_dev(KBDC kbdc) { - int res; + int res; - res = send_aux_command(kbdc, PSMC_DISABLE_DEV); - VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res)); + res = send_aux_command(kbdc, PSMC_DISABLE_DEV); + VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res)); - return (res == PSM_ACK); + return (res == PSM_ACK); } static int get_mouse_status(KBDC kbdc, int *status, int flag, int len) { - int cmd; - int res; - int i; + int cmd; + int res; + int i; - switch (flag) { - case 0: - default: - cmd = PSMC_SEND_DEV_STATUS; - break; - case 1: - cmd = PSMC_SEND_DEV_DATA; - break; - } - empty_aux_buffer(kbdc, 5); - res = send_aux_command(kbdc, cmd); - VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n", - (flag == 1) ? "DATA" : "STATUS", res)); - if (res != PSM_ACK) - return 0; + switch (flag) { + case 0: + default: + cmd = PSMC_SEND_DEV_STATUS; + break; + case 1: + cmd = PSMC_SEND_DEV_DATA; + break; + } + empty_aux_buffer(kbdc, 5); + res = send_aux_command(kbdc, cmd); + VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n", + (flag == 1) ? "DATA" : "STATUS", res)); + if (res != PSM_ACK) + return (0); - for (i = 0; i < len; ++i) { - status[i] = read_aux_data(kbdc); - if (status[i] < 0) - break; - } + for (i = 0; i < len; ++i) { + status[i] = read_aux_data(kbdc); + if (status[i] < 0) + break; + } - VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n", - (flag == 1) ? "data" : "status", status[0], status[1], status[2])); + VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n", + (flag == 1) ? "data" : "status", status[0], status[1], status[2])); - return i; + return (i); } static int get_aux_id(KBDC kbdc) { - int res; - int id; + int res; + int id; - empty_aux_buffer(kbdc, 5); - res = send_aux_command(kbdc, PSMC_SEND_DEV_ID); - VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res)); - if (res != PSM_ACK) - return (-1); + empty_aux_buffer(kbdc, 5); + res = send_aux_command(kbdc, PSMC_SEND_DEV_ID); + VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res)); + if (res != PSM_ACK) + return (-1); - /* 10ms delay */ - DELAY(10000); + /* 10ms delay */ + DELAY(10000); - id = read_aux_data(kbdc); - VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id)); + id = read_aux_data(kbdc); + VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id)); - return id; + return (id); } static int set_mouse_sampling_rate(KBDC kbdc, int rate) { - int res; + int res; - res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate); - VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res)); + res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate); + VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res)); - return ((res == PSM_ACK) ? rate : -1); + return ((res == PSM_ACK) ? rate : -1); } static int set_mouse_scaling(KBDC kbdc, int scale) { - int res; + int res; - switch (scale) { - case 1: - default: - scale = PSMC_SET_SCALING11; - break; - case 2: - scale = PSMC_SET_SCALING21; - break; - } - res = send_aux_command(kbdc, scale); - VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n", - (scale == PSMC_SET_SCALING21) ? "21" : "11", res)); + switch (scale) { + case 1: + default: + scale = PSMC_SET_SCALING11; + break; + case 2: + scale = PSMC_SET_SCALING21; + break; + } + res = send_aux_command(kbdc, scale); + VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n", + (scale == PSMC_SET_SCALING21) ? "21" : "11", res)); - return (res == PSM_ACK); + return (res == PSM_ACK); } /* `val' must be 0 through PSMD_MAX_RESOLUTION */ static int set_mouse_resolution(KBDC kbdc, int val) { - int res; + int res; - res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val); - VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res)); + res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val); + VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res)); - return ((res == PSM_ACK) ? val : -1); + return ((res == PSM_ACK) ? val : -1); } /* @@ -534,36 +543,34 @@ set_mouse_resolution(KBDC kbdc, int val) static int set_mouse_mode(KBDC kbdc) { - int res; + int res; - res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE); - VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res)); + res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE); + VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res)); - return (res == PSM_ACK); + return (res == PSM_ACK); } static int get_mouse_buttons(KBDC kbdc) { - int c = 2; /* assume two buttons by default */ - int status[3]; + int c = 2; /* assume two buttons by default */ + int status[3]; - /* - * NOTE: a special sequence to obtain Logitech Mouse specific - * information: set resolution to 25 ppi, set scaling to 1:1, set - * scaling to 1:1, set scaling to 1:1. Then the second byte of the - * mouse status bytes is the number of available buttons. - * Some manufactures also support this sequence. - */ - if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) - return c; - if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) - && set_mouse_scaling(kbdc, 1) - && (get_mouse_status(kbdc, status, 0, 3) >= 3)) { - if (status[1] != 0) - return status[1]; - } - return c; + /* + * NOTE: a special sequence to obtain Logitech Mouse specific + * information: set resolution to 25 ppi, set scaling to 1:1, set + * scaling to 1:1, set scaling to 1:1. Then the second byte of the + * mouse status bytes is the number of available buttons. + * Some manufactures also support this sequence. + */ + if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) + return (c); + if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) && + set_mouse_scaling(kbdc, 1) && + get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0) + return (status[1]); + return (c); } /* misc subroutines */ @@ -575,98 +582,97 @@ static int is_a_mouse(int id) { #if 0 - static int valid_ids[] = { - PSM_MOUSE_ID, /* mouse */ - PSM_BALLPOINT_ID, /* ballpoint device */ - PSM_INTELLI_ID, /* Intellimouse */ - PSM_EXPLORER_ID, /* Intellimouse Explorer */ - -1 /* end of table */ - }; - int i; + static int valid_ids[] = { + PSM_MOUSE_ID, /* mouse */ + PSM_BALLPOINT_ID, /* ballpoint device */ + PSM_INTELLI_ID, /* Intellimouse */ + PSM_EXPLORER_ID, /* Intellimouse Explorer */ + -1 /* end of table */ + }; + int i; - for (i = 0; valid_ids[i] >= 0; ++i) - if (valid_ids[i] == id) - return TRUE; - return FALSE; + for (i = 0; valid_ids[i] >= 0; ++i) + if (valid_ids[i] == id) + return (TRUE); + return (FALSE); #else - return TRUE; + return (TRUE); #endif } static char * model_name(int model) { - static struct { - int model_code; - char *model_name; - } models[] = { - { MOUSE_MODEL_NETSCROLL, "NetScroll" }, - { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" }, - { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" }, - { MOUSE_MODEL_THINK, "ThinkingMouse" }, - { MOUSE_MODEL_INTELLI, "IntelliMouse" }, - { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" }, - { MOUSE_MODEL_VERSAPAD, "VersaPad" }, - { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" }, - { MOUSE_MODEL_4D, "4D Mouse" }, - { MOUSE_MODEL_4DPLUS, "4D+ Mouse" }, - { MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" }, - { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" }, - { MOUSE_MODEL_UNKNOWN, NULL }, - }; - int i; + static struct { + int model_code; + char *model_name; + } models[] = { + { MOUSE_MODEL_NETSCROLL, "NetScroll" }, + { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" }, + { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" }, + { MOUSE_MODEL_THINK, "ThinkingMouse" }, + { MOUSE_MODEL_INTELLI, "IntelliMouse" }, + { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" }, + { MOUSE_MODEL_VERSAPAD, "VersaPad" }, + { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" }, + { MOUSE_MODEL_4D, "4D Mouse" }, + { MOUSE_MODEL_4DPLUS, "4D+ Mouse" }, + { MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" }, + { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" }, + { MOUSE_MODEL_UNKNOWN, "Unknown" }, + }; + int i; - for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i) { - if (models[i].model_code == model) - return models[i].model_name; - } - return "Unknown"; + for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i) + if (models[i].model_code == model) + break; + return (models[i].model_name); } static void recover_from_error(KBDC kbdc) { - /* discard anything left in the output buffer */ - empty_both_buffers(kbdc, 10); + /* discard anything left in the output buffer */ + empty_both_buffers(kbdc, 10); #if 0 - /* - * NOTE: KBDC_RESET_KBD may not restore the communication between the - * keyboard and the controller. - */ - reset_kbd(kbdc); + /* + * NOTE: KBDC_RESET_KBD may not restore the communication between the + * keyboard and the controller. + */ + reset_kbd(kbdc); #else - /* - * NOTE: somehow diagnostic and keyboard port test commands bring the - * keyboard back. - */ - if (!test_controller(kbdc)) - log(LOG_ERR, "psm: keyboard controller failed.\n"); - /* if there isn't a keyboard in the system, the following error is OK */ - if (test_kbd_port(kbdc) != 0) - VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n")); + /* + * NOTE: somehow diagnostic and keyboard port test commands bring the + * keyboard back. + */ + if (!test_controller(kbdc)) + log(LOG_ERR, "psm: keyboard controller failed.\n"); + /* if there isn't a keyboard in the system, the following error is OK */ + if (test_kbd_port(kbdc) != 0) + VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n")); #endif } static int restore_controller(KBDC kbdc, int command_byte) { - empty_both_buffers(kbdc, 10); + empty_both_buffers(kbdc, 10); - if (!set_controller_command_byte(kbdc, 0xff, command_byte)) { - log(LOG_ERR, "psm: failed to restore the keyboard controller " - "command byte.\n"); - empty_both_buffers(kbdc, 10); - return FALSE; - } else { - empty_both_buffers(kbdc, 10); - return TRUE; - } + if (!set_controller_command_byte(kbdc, 0xff, command_byte)) { + log(LOG_ERR, "psm: failed to restore the keyboard controller " + "command byte.\n"); + empty_both_buffers(kbdc, 10); + return (FALSE); + } else { + empty_both_buffers(kbdc, 10); + return (TRUE); + } } -/* +/* * Re-initialize the aux port and device. The aux port must be enabled - * and its interrupt must be disabled before calling this routine. + * and its interrupt must be disabled before calling this routine. * The aux device will be disabled before returning. * The keyboard controller must be locked via `kbdc_lock()' before * calling this routine. @@ -674,240 +680,250 @@ restore_controller(KBDC kbdc, int command_byte) static int doinitialize(struct psm_softc *sc, mousemode_t *mode) { - KBDC kbdc = sc->kbdc; - int stat[3]; - int i; + KBDC kbdc = sc->kbdc; + int stat[3]; + int i; - switch((i = test_aux_port(kbdc))) { - case 1: /* ignore these errors */ - case 2: - case 3: - case PSM_ACK: - if (verbose) - log(LOG_DEBUG, "psm%d: strange result for test aux port (%d).\n", - sc->unit, i); - /* FALLTHROUGH */ - case 0: /* no error */ - break; - case -1: /* time out */ - default: /* error */ - recover_from_error(kbdc); - if (sc->config & PSM_CONFIG_IGNPORTERROR) - break; - log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n", - sc->unit, i); - return FALSE; - } - - if (sc->config & PSM_CONFIG_NORESET) { - /* - * Don't try to reset the pointing device. It may possibly be - * left in the unknown state, though... - */ - } else { - /* - * NOTE: some controllers appears to hang the `keyboard' when - * the aux port doesn't exist and `PSMC_RESET_DEV' is issued. - */ - if (!reset_aux_dev(kbdc)) { - recover_from_error(kbdc); - log(LOG_ERR, "psm%d: failed to reset the aux device.\n", sc->unit); - return FALSE; - } - } - - /* - * both the aux port and the aux device is functioning, see - * if the device can be enabled. - */ - if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) { - log(LOG_ERR, "psm%d: failed to enable the aux device.\n", sc->unit); - return FALSE; - } - empty_both_buffers(kbdc, 10); /* remove stray data if any */ - - if (sc->config & PSM_CONFIG_NOIDPROBE) { - i = GENERIC_MOUSE_ENTRY; - } else { - /* FIXME: hardware ID, mouse buttons? */ - - /* other parameters */ - for (i = 0; vendortype[i].probefunc != NULL; ++i) { - if ((*vendortype[i].probefunc)(sc)) { - if (verbose >= 2) - log(LOG_ERR, "psm%d: found %s\n", - sc->unit, model_name(vendortype[i].model)); + switch((i = test_aux_port(kbdc))) { + case 1: /* ignore these errors */ + case 2: + case 3: + case PSM_ACK: + if (verbose) + log(LOG_DEBUG, + "psm%d: strange result for test aux port (%d).\n", + sc->unit, i); + /* FALLTHROUGH */ + case 0: /* no error */ break; - } + case -1: /* time out */ + default: /* error */ + recover_from_error(kbdc); + if (sc->config & PSM_CONFIG_IGNPORTERROR) + break; + log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n", + sc->unit, i); + return (FALSE); } - } - sc->hw.model = vendortype[i].model; - sc->mode.packetsize = vendortype[i].packetsize; + if (sc->config & PSM_CONFIG_NORESET) { + /* + * Don't try to reset the pointing device. It may possibly + * be left in the unknown state, though... + */ + } else { + /* + * NOTE: some controllers appears to hang the `keyboard' when + * the aux port doesn't exist and `PSMC_RESET_DEV' is issued. + */ + if (!reset_aux_dev(kbdc)) { + recover_from_error(kbdc); + log(LOG_ERR, "psm%d: failed to reset the aux device.\n", + sc->unit); + return (FALSE); + } + } - /* set mouse parameters */ - if (mode != (mousemode_t *)NULL) { - if (mode->rate > 0) - mode->rate = set_mouse_sampling_rate(kbdc, mode->rate); - if (mode->resolution >= 0) - mode->resolution = set_mouse_resolution(kbdc, mode->resolution); - set_mouse_scaling(kbdc, 1); - set_mouse_mode(kbdc); - } + /* + * both the aux port and the aux device is functioning, see + * if the device can be enabled. + */ + if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) { + log(LOG_ERR, "psm%d: failed to enable the aux device.\n", + sc->unit); + return (FALSE); + } + empty_both_buffers(kbdc, 10); /* remove stray data if any */ - /* Record sync on the next data packet we see. */ - sc->flags |= PSM_NEED_SYNCBITS; + if (sc->config & PSM_CONFIG_NOIDPROBE) + i = GENERIC_MOUSE_ENTRY; + else { + /* FIXME: hardware ID, mouse buttons? */ - /* just check the status of the mouse */ - if (get_mouse_status(kbdc, stat, 0, 3) < 3) - log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n", - sc->unit); + /* other parameters */ + for (i = 0; vendortype[i].probefunc != NULL; ++i) + if ((*vendortype[i].probefunc)(sc)) { + if (verbose >= 2) + log(LOG_ERR, "psm%d: found %s\n", + sc->unit, + model_name(vendortype[i].model)); + break; + } + } - return TRUE; + sc->hw.model = vendortype[i].model; + sc->mode.packetsize = vendortype[i].packetsize; + + /* set mouse parameters */ + if (mode != (mousemode_t *)NULL) { + if (mode->rate > 0) + mode->rate = set_mouse_sampling_rate(kbdc, mode->rate); + if (mode->resolution >= 0) + mode->resolution = + set_mouse_resolution(kbdc, mode->resolution); + set_mouse_scaling(kbdc, 1); + set_mouse_mode(kbdc); + } + + /* Record sync on the next data packet we see. */ + sc->flags |= PSM_NEED_SYNCBITS; + + /* just check the status of the mouse */ + if (get_mouse_status(kbdc, stat, 0, 3) < 3) + log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n", + sc->unit); + + return (TRUE); } static int doopen(struct psm_softc *sc, int command_byte) { - int stat[3]; + int stat[3]; - /* enable the mouse device */ - if (!enable_aux_dev(sc->kbdc)) { - /* MOUSE ERROR: failed to enable the mouse because: - * 1) the mouse is faulty, - * 2) the mouse has been removed(!?) - * In the latter case, the keyboard may have hung, and need - * recovery procedure... - */ - recover_from_error(sc->kbdc); + /* enable the mouse device */ + if (!enable_aux_dev(sc->kbdc)) { + /* MOUSE ERROR: failed to enable the mouse because: + * 1) the mouse is faulty, + * 2) the mouse has been removed(!?) + * In the latter case, the keyboard may have hung, and need + * recovery procedure... + */ + recover_from_error(sc->kbdc); #if 0 - /* FIXME: we could reset the mouse here and try to enable - * it again. But it will take long time and it's not a good - * idea to disable the keyboard that long... - */ - if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) { - recover_from_error(sc->kbdc); + /* FIXME: we could reset the mouse here and try to enable + * it again. But it will take long time and it's not a good + * idea to disable the keyboard that long... + */ + if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) { + recover_from_error(sc->kbdc); #else - { + { #endif - restore_controller(sc->kbdc, command_byte); - /* mark this device is no longer available */ - sc->state &= ~PSM_VALID; - log(LOG_ERR, "psm%d: failed to enable the device (doopen).\n", - sc->unit); - return (EIO); + restore_controller(sc->kbdc, command_byte); + /* mark this device is no longer available */ + sc->state &= ~PSM_VALID; + log(LOG_ERR, + "psm%d: failed to enable the device (doopen).\n", + sc->unit); + return (EIO); + } } - } - if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) - log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n", sc->unit); + if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) + log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n", + sc->unit); - /* enable the aux port and interrupt */ - if (!set_controller_command_byte(sc->kbdc, + /* enable the aux port and interrupt */ + if (!set_controller_command_byte(sc->kbdc, kbdc_get_device_mask(sc->kbdc), - (command_byte & KBD_KBD_CONTROL_BITS) - | KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) { - /* CONTROLLER ERROR */ - disable_aux_dev(sc->kbdc); - restore_controller(sc->kbdc, command_byte); - log(LOG_ERR, "psm%d: failed to enable the aux interrupt (doopen).\n", - sc->unit); - return (EIO); - } + (command_byte & KBD_KBD_CONTROL_BITS) | + KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) { + /* CONTROLLER ERROR */ + disable_aux_dev(sc->kbdc); + restore_controller(sc->kbdc, command_byte); + log(LOG_ERR, + "psm%d: failed to enable the aux interrupt (doopen).\n", + sc->unit); + return (EIO); + } - /* start the watchdog timer */ - sc->watchdog = FALSE; - sc->callout = timeout(psmtimeout, (void *)(uintptr_t)sc, hz*2); + /* start the watchdog timer */ + sc->watchdog = FALSE; + sc->callout = timeout(psmtimeout, (void *)(uintptr_t)sc, hz*2); - return (0); + return (0); } static int reinitialize(struct psm_softc *sc, int doinit) { - int err; - int c; - int s; + int err; + int c; + int s; - /* don't let anybody mess with the aux device */ - if (!kbdc_lock(sc->kbdc, TRUE)) - return (EIO); - s = spltty(); + /* don't let anybody mess with the aux device */ + if (!kbdc_lock(sc->kbdc, TRUE)) + return (EIO); + s = spltty(); - /* block our watchdog timer */ - sc->watchdog = FALSE; - untimeout(psmtimeout, (void *)(uintptr_t)sc, sc->callout); - callout_handle_init(&sc->callout); + /* block our watchdog timer */ + sc->watchdog = FALSE; + untimeout(psmtimeout, (void *)(uintptr_t)sc, sc->callout); + callout_handle_init(&sc->callout); - /* save the current controller command byte */ - empty_both_buffers(sc->kbdc, 10); - c = get_controller_command_byte(sc->kbdc); - VLOG(2, (LOG_DEBUG, "psm%d: current command byte: %04x (reinitialize).\n", - sc->unit, c)); + /* save the current controller command byte */ + empty_both_buffers(sc->kbdc, 10); + c = get_controller_command_byte(sc->kbdc); + VLOG(2, (LOG_DEBUG, + "psm%d: current command byte: %04x (reinitialize).\n", + sc->unit, c)); - /* enable the aux port but disable the aux interrupt and the keyboard */ - if ((c == -1) || !set_controller_command_byte(sc->kbdc, + /* enable the aux port but disable the aux interrupt and the keyboard */ + if ((c == -1) || !set_controller_command_byte(sc->kbdc, kbdc_get_device_mask(sc->kbdc), - KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT - | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* CONTROLLER ERROR */ + KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT | + KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* CONTROLLER ERROR */ + splx(s); + kbdc_lock(sc->kbdc, FALSE); + log(LOG_ERR, + "psm%d: unable to set the command byte (reinitialize).\n", + sc->unit); + return (EIO); + } + + /* flush any data */ + if (sc->state & PSM_VALID) { + /* this may fail; but never mind... */ + disable_aux_dev(sc->kbdc); + empty_aux_buffer(sc->kbdc, 10); + } + flushpackets(sc); + sc->syncerrors = 0; + sc->pkterrors = 0; + memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr)); + + /* try to detect the aux device; are you still there? */ + err = 0; + if (doinit) { + if (doinitialize(sc, &sc->mode)) { + /* yes */ + sc->state |= PSM_VALID; + } else { + /* the device has gone! */ + restore_controller(sc->kbdc, c); + sc->state &= ~PSM_VALID; + log(LOG_ERR, + "psm%d: the aux device has gone! (reinitialize).\n", + sc->unit); + err = ENXIO; + } + } splx(s); - kbdc_lock(sc->kbdc, FALSE); - log(LOG_ERR, "psm%d: unable to set the command byte (reinitialize).\n", - sc->unit); - return (EIO); - } - /* flush any data */ - if (sc->state & PSM_VALID) { - disable_aux_dev(sc->kbdc); /* this may fail; but never mind... */ - empty_aux_buffer(sc->kbdc, 10); - } - flushpackets(sc); - sc->syncerrors = 0; - sc->pkterrors = 0; - memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr)); - - /* try to detect the aux device; are you still there? */ - err = 0; - if (doinit) { - if (doinitialize(sc, &sc->mode)) { - /* yes */ - sc->state |= PSM_VALID; + /* restore the driver state */ + if ((sc->state & PSM_OPEN) && (err == 0)) { + /* enable the aux device and the port again */ + err = doopen(sc, c); + if (err != 0) + log(LOG_ERR, "psm%d: failed to enable the device " + "(reinitialize).\n", sc->unit); } else { - /* the device has gone! */ - restore_controller(sc->kbdc, c); - sc->state &= ~PSM_VALID; - log(LOG_ERR, "psm%d: the aux device has gone! (reinitialize).\n", - sc->unit); - err = ENXIO; + /* restore the keyboard port and disable the aux port */ + if (!set_controller_command_byte(sc->kbdc, + kbdc_get_device_mask(sc->kbdc), + (c & KBD_KBD_CONTROL_BITS) | + KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* CONTROLLER ERROR */ + log(LOG_ERR, "psm%d: failed to disable the aux port " + "(reinitialize).\n", sc->unit); + err = EIO; + } } - } - splx(s); - /* restore the driver state */ - if ((sc->state & PSM_OPEN) && (err == 0)) { - /* enable the aux device and the port again */ - err = doopen(sc, c); - if (err != 0) - log(LOG_ERR, "psm%d: failed to enable the device (reinitialize).\n", - sc->unit); - } else { - /* restore the keyboard port and disable the aux port */ - if (!set_controller_command_byte(sc->kbdc, - kbdc_get_device_mask(sc->kbdc), - (c & KBD_KBD_CONTROL_BITS) - | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* CONTROLLER ERROR */ - log(LOG_ERR, - "psm%d: failed to disable the aux port (reinitialize).\n", - sc->unit); - err = EIO; - } - } - - kbdc_lock(sc->kbdc, FALSE); - return (err); + kbdc_lock(sc->kbdc, FALSE); + return (err); } /* psm driver entry points */ @@ -915,762 +931,771 @@ reinitialize(struct psm_softc *sc, int doinit) static void psmidentify(driver_t *driver, device_t parent) { - device_t psmc; - device_t psm; - u_long irq; - int unit; + device_t psmc; + device_t psm; + u_long irq; + int unit; - unit = device_get_unit(parent); + unit = device_get_unit(parent); - /* always add at least one child */ - psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit); - if (psm == NULL) - return; + /* always add at least one child */ + psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit); + if (psm == NULL) + return; - irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX); - if (irq > 0) - return; + irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX); + if (irq > 0) + return; - /* - * If the PS/2 mouse device has already been reported by ACPI or - * PnP BIOS, obtain the IRQ resource from it. - * (See psmcpnp_attach() below.) - */ - psmc = device_find_child(device_get_parent(parent), - PSMCPNP_DRIVER_NAME, unit); - if (psmc == NULL) - return; - irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0); - if (irq <= 0) - return; - bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1); + /* + * If the PS/2 mouse device has already been reported by ACPI or + * PnP BIOS, obtain the IRQ resource from it. + * (See psmcpnp_attach() below.) + */ + psmc = device_find_child(device_get_parent(parent), + PSMCPNP_DRIVER_NAME, unit); + if (psmc == NULL) + return; + irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0); + if (irq <= 0) + return; + bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1); } -#define endprobe(v) do { if (bootverbose) \ - --verbose; \ - kbdc_set_device_mask(sc->kbdc, mask); \ - kbdc_lock(sc->kbdc, FALSE); \ - return (v); \ - } while (0) +#define endprobe(v) do { \ + if (bootverbose) \ + --verbose; \ + kbdc_set_device_mask(sc->kbdc, mask); \ + kbdc_lock(sc->kbdc, FALSE); \ + return (v); \ +} while (0) static int psmprobe(device_t dev) { - int unit = device_get_unit(dev); - struct psm_softc *sc = device_get_softc(dev); - int stat[3]; - int command_byte; - int mask; - int rid; - int i; + int unit = device_get_unit(dev); + struct psm_softc *sc = device_get_softc(dev); + int stat[3]; + int command_byte; + int mask; + int rid; + int i; #if 0 - kbdc_debug(TRUE); + kbdc_debug(TRUE); #endif - /* see if IRQ is available */ - rid = KBDC_RID_AUX; - sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - RF_SHAREABLE | RF_ACTIVE); - if (sc->intr == NULL) { - if (bootverbose) - device_printf(dev, "unable to allocate IRQ\n"); - return (ENXIO); - } - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); + /* see if IRQ is available */ + rid = KBDC_RID_AUX; + sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, + RF_SHAREABLE | RF_ACTIVE); + if (sc->intr == NULL) { + if (bootverbose) + device_printf(dev, "unable to allocate IRQ\n"); + return (ENXIO); + } + bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); - sc->unit = unit; - sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev))); - sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS; - /* XXX: for backward compatibility */ + sc->unit = unit; + sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev))); + sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS; + /* XXX: for backward compatibility */ #if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM) - sc->config |= + sc->config |= #ifdef PSM_RESETAFTERSUSPEND PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND; #else PSM_CONFIG_HOOKRESUME; #endif #endif /* PSM_HOOKRESUME | PSM_HOOKAPM */ - sc->flags = 0; - if (bootverbose) - ++verbose; + sc->flags = 0; + if (bootverbose) + ++verbose; - device_set_desc(dev, "PS/2 Mouse"); + device_set_desc(dev, "PS/2 Mouse"); - if (!kbdc_lock(sc->kbdc, TRUE)) { - printf("psm%d: unable to lock the controller.\n", unit); - if (bootverbose) - --verbose; - return (ENXIO); - } + if (!kbdc_lock(sc->kbdc, TRUE)) { + printf("psm%d: unable to lock the controller.\n", unit); + if (bootverbose) + --verbose; + return (ENXIO); + } - /* - * NOTE: two bits in the command byte controls the operation of the - * aux port (mouse port): the aux port disable bit (bit 5) and the aux - * port interrupt (IRQ 12) enable bit (bit 2). - */ - - /* discard anything left after the keyboard initialization */ - empty_both_buffers(sc->kbdc, 10); - - /* save the current command byte; it will be used later */ - mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS; - command_byte = get_controller_command_byte(sc->kbdc); - if (verbose) - printf("psm%d: current command byte:%04x\n", unit, command_byte); - if (command_byte == -1) { - /* CONTROLLER ERROR */ - printf("psm%d: unable to get the current command byte value.\n", - unit); - endprobe(ENXIO); - } - - /* - * disable the keyboard port while probing the aux port, which must be - * enabled during this routine - */ - if (!set_controller_command_byte(sc->kbdc, - KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS, - KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT - | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* - * this is CONTROLLER ERROR; I don't know how to recover - * from this error... - */ - restore_controller(sc->kbdc, command_byte); - printf("psm%d: unable to set the command byte.\n", unit); - endprobe(ENXIO); - } - write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT); - - /* - * NOTE: `test_aux_port()' is designed to return with zero if the aux - * port exists and is functioning. However, some controllers appears - * to respond with zero even when the aux port doesn't exist. (It may - * be that this is only the case when the controller DOES have the aux - * port but the port is not wired on the motherboard.) The keyboard - * controllers without the port, such as the original AT, are - * supporsed to return with an error code or simply time out. In any - * case, we have to continue probing the port even when the controller - * passes this test. - * - * XXX: some controllers erroneously return the error code 1, 2 or 3 - * when it has the perfectly functional aux port. We have to ignore - * this error code. Even if the controller HAS error with the aux - * port, it will be detected later... - * XXX: another incompatible controller returns PSM_ACK (0xfa)... - */ - switch ((i = test_aux_port(sc->kbdc))) { - case 1: /* ignore these errors */ - case 2: - case 3: - case PSM_ACK: - if (verbose) - printf("psm%d: strange result for test aux port (%d).\n", - unit, i); - /* FALLTHROUGH */ - case 0: /* no error */ - break; - case -1: /* time out */ - default: /* error */ - recover_from_error(sc->kbdc); - if (sc->config & PSM_CONFIG_IGNPORTERROR) - break; - restore_controller(sc->kbdc, command_byte); - if (verbose) - printf("psm%d: the aux port is not functioning (%d).\n", - unit, i); - endprobe(ENXIO); - } - - if (sc->config & PSM_CONFIG_NORESET) { - /* - * Don't try to reset the pointing device. It may possibly be - * left in the unknown state, though... - */ - } else { /* - * NOTE: some controllers appears to hang the `keyboard' when the aux - * port doesn't exist and `PSMC_RESET_DEV' is issued. - * - * Attempt to reset the controller twice -- this helps - * pierce through some KVM switches. The second reset - * is non-fatal. + * NOTE: two bits in the command byte controls the operation of the + * aux port (mouse port): the aux port disable bit (bit 5) and the aux + * port interrupt (IRQ 12) enable bit (bit 2). */ - if (!reset_aux_dev(sc->kbdc)) { - recover_from_error(sc->kbdc); - restore_controller(sc->kbdc, command_byte); - if (verbose) - printf("psm%d: failed to reset the aux device.\n", unit); - endprobe(ENXIO); - } else if (!reset_aux_dev(sc->kbdc)) { - recover_from_error(sc->kbdc); - if (verbose >= 2) - printf("psm%d: failed to reset the aux device (2).\n", - unit); - } - } - /* - * both the aux port and the aux device is functioning, see if the - * device can be enabled. NOTE: when enabled, the device will start - * sending data; we shall immediately disable the device once we know - * the device can be enabled. - */ - if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) { - /* MOUSE ERROR */ - recover_from_error(sc->kbdc); - restore_controller(sc->kbdc, command_byte); + /* discard anything left after the keyboard initialization */ + empty_both_buffers(sc->kbdc, 10); + + /* save the current command byte; it will be used later */ + mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS; + command_byte = get_controller_command_byte(sc->kbdc); if (verbose) - printf("psm%d: failed to enable the aux device.\n", unit); - endprobe(ENXIO); - } - - /* save the default values after reset */ - if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) { - sc->dflt_mode.rate = sc->mode.rate = stat[2]; - sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; - } else { - sc->dflt_mode.rate = sc->mode.rate = -1; - sc->dflt_mode.resolution = sc->mode.resolution = -1; - } - - /* hardware information */ - sc->hw.iftype = MOUSE_IF_PS2; - - /* verify the device is a mouse */ - sc->hw.hwid = get_aux_id(sc->kbdc); - if (!is_a_mouse(sc->hw.hwid)) { - restore_controller(sc->kbdc, command_byte); - if (verbose) - printf("psm%d: unknown device type (%d).\n", unit, sc->hw.hwid); - endprobe(ENXIO); - } - switch (sc->hw.hwid) { - case PSM_BALLPOINT_ID: - sc->hw.type = MOUSE_TRACKBALL; - break; - case PSM_MOUSE_ID: - case PSM_INTELLI_ID: - case PSM_EXPLORER_ID: - case PSM_4DMOUSE_ID: - case PSM_4DPLUS_ID: - sc->hw.type = MOUSE_MOUSE; - break; - default: - sc->hw.type = MOUSE_UNKNOWN; - break; - } - - if (sc->config & PSM_CONFIG_NOIDPROBE) { - sc->hw.buttons = 2; - i = GENERIC_MOUSE_ENTRY; - } else { - /* # of buttons */ - sc->hw.buttons = get_mouse_buttons(sc->kbdc); - - /* other parameters */ - for (i = 0; vendortype[i].probefunc != NULL; ++i) { - if ((*vendortype[i].probefunc)(sc)) { - if (verbose >= 2) - printf("psm%d: found %s\n", - unit, model_name(vendortype[i].model)); - break; - } + printf("psm%d: current command byte:%04x\n", unit, + command_byte); + if (command_byte == -1) { + /* CONTROLLER ERROR */ + printf("psm%d: unable to get the current command byte value.\n", + unit); + endprobe(ENXIO); } - } - sc->hw.model = vendortype[i].model; - - sc->dflt_mode.level = PSM_LEVEL_BASE; - sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE; - sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4; - if (sc->config & PSM_CONFIG_NOCHECKSYNC) - sc->dflt_mode.syncmask[0] = 0; - else - sc->dflt_mode.syncmask[0] = vendortype[i].syncmask; - if (sc->config & PSM_CONFIG_FORCETAP) - sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP; - sc->dflt_mode.syncmask[1] = 0; /* syncbits */ - sc->mode = sc->dflt_mode; - sc->mode.packetsize = vendortype[i].packetsize; - - /* set mouse parameters */ -#if 0 - /* - * A version of Logitech FirstMouse+ won't report wheel movement, - * if SET_DEFAULTS is sent... Don't use this command. - * This fix was found by Takashi Nishida. - */ - i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS); - if (verbose >= 2) - printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i); -#endif - if (sc->config & PSM_CONFIG_RESOLUTION) { - sc->mode.resolution - = set_mouse_resolution(sc->kbdc, - (sc->config & PSM_CONFIG_RESOLUTION) - 1); - } else if (sc->mode.resolution >= 0) { - sc->mode.resolution - = set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution); - } - if (sc->mode.rate > 0) { - sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate); - } - set_mouse_scaling(sc->kbdc, 1); - - /* Record sync on the next data packet we see. */ - sc->flags |= PSM_NEED_SYNCBITS; - - /* just check the status of the mouse */ - /* - * NOTE: XXX there are some arcane controller/mouse combinations out - * there, which hung the controller unless there is data transmission - * after ACK from the mouse. - */ - if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) { - printf("psm%d: failed to get status.\n", unit); - } else { - /* - * When in its native mode, some mice operate with different - * default parameters than in the PS/2 compatible mode. + /* + * disable the keyboard port while probing the aux port, which must be + * enabled during this routine */ - sc->dflt_mode.rate = sc->mode.rate = stat[2]; - sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; - } - - /* disable the aux port for now... */ - if (!set_controller_command_byte(sc->kbdc, + if (!set_controller_command_byte(sc->kbdc, KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS, - (command_byte & KBD_KBD_CONTROL_BITS) - | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* - * this is CONTROLLER ERROR; I don't know the proper way to - * recover from this error... + KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT | + KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* + * this is CONTROLLER ERROR; I don't know how to recover + * from this error... + */ + restore_controller(sc->kbdc, command_byte); + printf("psm%d: unable to set the command byte.\n", unit); + endprobe(ENXIO); + } + write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT); + + /* + * NOTE: `test_aux_port()' is designed to return with zero if the aux + * port exists and is functioning. However, some controllers appears + * to respond with zero even when the aux port doesn't exist. (It may + * be that this is only the case when the controller DOES have the aux + * port but the port is not wired on the motherboard.) The keyboard + * controllers without the port, such as the original AT, are + * supporsed to return with an error code or simply time out. In any + * case, we have to continue probing the port even when the controller + * passes this test. + * + * XXX: some controllers erroneously return the error code 1, 2 or 3 + * when it has the perfectly functional aux port. We have to ignore + * this error code. Even if the controller HAS error with the aux + * port, it will be detected later... + * XXX: another incompatible controller returns PSM_ACK (0xfa)... */ - restore_controller(sc->kbdc, command_byte); - printf("psm%d: unable to set the command byte.\n", unit); - endprobe(ENXIO); - } + switch ((i = test_aux_port(sc->kbdc))) { + case 1: /* ignore these errors */ + case 2: + case 3: + case PSM_ACK: + if (verbose) + printf("psm%d: strange result for test aux port " + "(%d).\n", unit, i); + /* FALLTHROUGH */ + case 0: /* no error */ + break; + case -1: /* time out */ + default: /* error */ + recover_from_error(sc->kbdc); + if (sc->config & PSM_CONFIG_IGNPORTERROR) + break; + restore_controller(sc->kbdc, command_byte); + if (verbose) + printf("psm%d: the aux port is not functioning (%d).\n", + unit, i); + endprobe(ENXIO); + } - /* - * Synaptics TouchPad seems to go back to Relative Mode after - * the previous set_controller_command_byte() call; by issueing - * a Read Mode Byte command, the touchpad is in Absolute Mode - * again. - */ - if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) { - mouse_ext_command(sc->kbdc, 1); - } + if (sc->config & PSM_CONFIG_NORESET) { + /* + * Don't try to reset the pointing device. It may possibly be + * left in the unknown state, though... + */ + } else { + /* + * NOTE: some controllers appears to hang the `keyboard' when + * the aux port doesn't exist and `PSMC_RESET_DEV' is issued. + * + * Attempt to reset the controller twice -- this helps + * pierce through some KVM switches. The second reset + * is non-fatal. + */ + if (!reset_aux_dev(sc->kbdc)) { + recover_from_error(sc->kbdc); + restore_controller(sc->kbdc, command_byte); + if (verbose) + printf("psm%d: failed to reset the aux " + "device.\n", unit); + endprobe(ENXIO); + } else if (!reset_aux_dev(sc->kbdc)) { + recover_from_error(sc->kbdc); + if (verbose >= 2) + printf("psm%d: failed to reset the aux device " + "(2).\n", unit); + } + } - /* done */ - kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS); - kbdc_lock(sc->kbdc, FALSE); - return (0); + /* + * both the aux port and the aux device is functioning, see if the + * device can be enabled. NOTE: when enabled, the device will start + * sending data; we shall immediately disable the device once we know + * the device can be enabled. + */ + if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) { + /* MOUSE ERROR */ + recover_from_error(sc->kbdc); + restore_controller(sc->kbdc, command_byte); + if (verbose) + printf("psm%d: failed to enable the aux device.\n", + unit); + endprobe(ENXIO); + } + + /* save the default values after reset */ + if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) { + sc->dflt_mode.rate = sc->mode.rate = stat[2]; + sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; + } else { + sc->dflt_mode.rate = sc->mode.rate = -1; + sc->dflt_mode.resolution = sc->mode.resolution = -1; + } + + /* hardware information */ + sc->hw.iftype = MOUSE_IF_PS2; + + /* verify the device is a mouse */ + sc->hw.hwid = get_aux_id(sc->kbdc); + if (!is_a_mouse(sc->hw.hwid)) { + restore_controller(sc->kbdc, command_byte); + if (verbose) + printf("psm%d: unknown device type (%d).\n", unit, + sc->hw.hwid); + endprobe(ENXIO); + } + switch (sc->hw.hwid) { + case PSM_BALLPOINT_ID: + sc->hw.type = MOUSE_TRACKBALL; + break; + case PSM_MOUSE_ID: + case PSM_INTELLI_ID: + case PSM_EXPLORER_ID: + case PSM_4DMOUSE_ID: + case PSM_4DPLUS_ID: + sc->hw.type = MOUSE_MOUSE; + break; + default: + sc->hw.type = MOUSE_UNKNOWN; + break; + } + + if (sc->config & PSM_CONFIG_NOIDPROBE) { + sc->hw.buttons = 2; + i = GENERIC_MOUSE_ENTRY; + } else { + /* # of buttons */ + sc->hw.buttons = get_mouse_buttons(sc->kbdc); + + /* other parameters */ + for (i = 0; vendortype[i].probefunc != NULL; ++i) + if ((*vendortype[i].probefunc)(sc)) { + if (verbose >= 2) + printf("psm%d: found %s\n", unit, + model_name(vendortype[i].model)); + break; + } + } + + sc->hw.model = vendortype[i].model; + + sc->dflt_mode.level = PSM_LEVEL_BASE; + sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE; + sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4; + if (sc->config & PSM_CONFIG_NOCHECKSYNC) + sc->dflt_mode.syncmask[0] = 0; + else + sc->dflt_mode.syncmask[0] = vendortype[i].syncmask; + if (sc->config & PSM_CONFIG_FORCETAP) + sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP; + sc->dflt_mode.syncmask[1] = 0; /* syncbits */ + sc->mode = sc->dflt_mode; + sc->mode.packetsize = vendortype[i].packetsize; + + /* set mouse parameters */ +#if 0 + /* + * A version of Logitech FirstMouse+ won't report wheel movement, + * if SET_DEFAULTS is sent... Don't use this command. + * This fix was found by Takashi Nishida. + */ + i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS); + if (verbose >= 2) + printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i); +#endif + if (sc->config & PSM_CONFIG_RESOLUTION) + sc->mode.resolution = + set_mouse_resolution(sc->kbdc, + (sc->config & PSM_CONFIG_RESOLUTION) - 1); + else if (sc->mode.resolution >= 0) + sc->mode.resolution = + set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution); + if (sc->mode.rate > 0) + sc->mode.rate = + set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate); + set_mouse_scaling(sc->kbdc, 1); + + /* Record sync on the next data packet we see. */ + sc->flags |= PSM_NEED_SYNCBITS; + + /* just check the status of the mouse */ + /* + * NOTE: XXX there are some arcane controller/mouse combinations out + * there, which hung the controller unless there is data transmission + * after ACK from the mouse. + */ + if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) + printf("psm%d: failed to get status.\n", unit); + else { + /* + * When in its native mode, some mice operate with different + * default parameters than in the PS/2 compatible mode. + */ + sc->dflt_mode.rate = sc->mode.rate = stat[2]; + sc->dflt_mode.resolution = sc->mode.resolution = stat[1]; + } + + /* disable the aux port for now... */ + if (!set_controller_command_byte(sc->kbdc, + KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS, + (command_byte & KBD_KBD_CONTROL_BITS) | + KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* + * this is CONTROLLER ERROR; I don't know the proper way to + * recover from this error... + */ + restore_controller(sc->kbdc, command_byte); + printf("psm%d: unable to set the command byte.\n", unit); + endprobe(ENXIO); + } + + /* + * Synaptics TouchPad seems to go back to Relative Mode after + * the previous set_controller_command_byte() call; by issueing + * a Read Mode Byte command, the touchpad is in Absolute Mode + * again. + */ + if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) + mouse_ext_command(sc->kbdc, 1); + + /* done */ + kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS); + kbdc_lock(sc->kbdc, FALSE); + return (0); } static int psmattach(device_t dev) { - int unit = device_get_unit(dev); - struct psm_softc *sc = device_get_softc(dev); - int error; - int rid; + int unit = device_get_unit(dev); + struct psm_softc *sc = device_get_softc(dev); + int error; + int rid; - /* Setup initial state */ - sc->state = PSM_VALID; - callout_handle_init(&sc->callout); + /* Setup initial state */ + sc->state = PSM_VALID; + callout_handle_init(&sc->callout); - /* Setup our interrupt handler */ - rid = KBDC_RID_AUX; - sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - RF_SHAREABLE | RF_ACTIVE); - if (sc->intr == NULL) - return (ENXIO); - error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc, &sc->ih); - if (error) { - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); - return (error); - } + /* Setup our interrupt handler */ + rid = KBDC_RID_AUX; + sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, + RF_SHAREABLE | RF_ACTIVE); + if (sc->intr == NULL) + return (ENXIO); + error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc, + &sc->ih); + if (error) { + bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); + return (error); + } - /* Done */ - sc->dev = make_dev(&psm_cdevsw, PSM_MKMINOR(unit, FALSE), 0, 0, 0666, - "psm%d", unit); - sc->bdev = make_dev(&psm_cdevsw, PSM_MKMINOR(unit, TRUE), 0, 0, 0666, - "bpsm%d", unit); + /* Done */ + sc->dev = make_dev(&psm_cdevsw, PSM_MKMINOR(unit, FALSE), 0, 0, 0666, + "psm%d", unit); + sc->bdev = make_dev(&psm_cdevsw, PSM_MKMINOR(unit, TRUE), 0, 0, 0666, + "bpsm%d", unit); - if (!verbose) { - printf("psm%d: model %s, device ID %d\n", - unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff); - } else { - printf("psm%d: model %s, device ID %d-%02x, %d buttons\n", - unit, model_name(sc->hw.model), - sc->hw.hwid & 0x00ff, sc->hw.hwid >> 8, sc->hw.buttons); - printf("psm%d: config:%08x, flags:%08x, packet size:%d\n", - unit, sc->config, sc->flags, sc->mode.packetsize); - printf("psm%d: syncmask:%02x, syncbits:%02x\n", - unit, sc->mode.syncmask[0], sc->mode.syncmask[1]); - } + if (!verbose) + printf("psm%d: model %s, device ID %d\n", + unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff); + else { + printf("psm%d: model %s, device ID %d-%02x, %d buttons\n", + unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff, + sc->hw.hwid >> 8, sc->hw.buttons); + printf("psm%d: config:%08x, flags:%08x, packet size:%d\n", + unit, sc->config, sc->flags, sc->mode.packetsize); + printf("psm%d: syncmask:%02x, syncbits:%02x\n", + unit, sc->mode.syncmask[0], sc->mode.syncmask[1]); + } - if (bootverbose) - --verbose; + if (bootverbose) + --verbose; - return (0); + return (0); } static int psmdetach(device_t dev) { - struct psm_softc *sc; - int rid; + struct psm_softc *sc; + int rid; - sc = device_get_softc(dev); - if (sc->state & PSM_OPEN) - return EBUSY; + sc = device_get_softc(dev); + if (sc->state & PSM_OPEN) + return (EBUSY); - rid = KBDC_RID_AUX; - bus_teardown_intr(dev, sc->intr, sc->ih); - bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); + rid = KBDC_RID_AUX; + bus_teardown_intr(dev, sc->intr, sc->ih); + bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr); - destroy_dev(sc->dev); - destroy_dev(sc->bdev); + destroy_dev(sc->dev); + destroy_dev(sc->bdev); - return 0; + return (0); } static int psmopen(struct cdev *dev, int flag, int fmt, struct thread *td) { - int unit = PSM_UNIT(dev); - struct psm_softc *sc; - int command_byte; - int err; - int s; + int unit = PSM_UNIT(dev); + struct psm_softc *sc; + int command_byte; + int err; + int s; - /* Get device data */ - sc = PSM_SOFTC(unit); - if ((sc == NULL) || (sc->state & PSM_VALID) == 0) - /* the device is no longer valid/functioning */ - return (ENXIO); + /* Get device data */ + sc = PSM_SOFTC(unit); + if ((sc == NULL) || (sc->state & PSM_VALID) == 0) { + /* the device is no longer valid/functioning */ + return (ENXIO); + } - /* Disallow multiple opens */ - if (sc->state & PSM_OPEN) - return (EBUSY); + /* Disallow multiple opens */ + if (sc->state & PSM_OPEN) + return (EBUSY); - device_busy(devclass_get_device(psm_devclass, unit)); + device_busy(devclass_get_device(psm_devclass, unit)); - /* Initialize state */ - sc->mode.level = sc->dflt_mode.level; - sc->mode.protocol = sc->dflt_mode.protocol; - sc->watchdog = FALSE; + /* Initialize state */ + sc->mode.level = sc->dflt_mode.level; + sc->mode.protocol = sc->dflt_mode.protocol; + sc->watchdog = FALSE; - /* flush the event queue */ - sc->queue.count = 0; - sc->queue.head = 0; - sc->queue.tail = 0; - sc->status.flags = 0; - sc->status.button = 0; - sc->status.obutton = 0; - sc->status.dx = 0; - sc->status.dy = 0; - sc->status.dz = 0; - sc->button = 0; - sc->pqueue_start = 0; - sc->pqueue_end = 0; + /* flush the event queue */ + sc->queue.count = 0; + sc->queue.head = 0; + sc->queue.tail = 0; + sc->status.flags = 0; + sc->status.button = 0; + sc->status.obutton = 0; + sc->status.dx = 0; + sc->status.dy = 0; + sc->status.dz = 0; + sc->button = 0; + sc->pqueue_start = 0; + sc->pqueue_end = 0; - /* empty input buffer */ - flushpackets(sc); - sc->syncerrors = 0; - sc->pkterrors = 0; + /* empty input buffer */ + flushpackets(sc); + sc->syncerrors = 0; + sc->pkterrors = 0; - /* don't let timeout routines in the keyboard driver to poll the kbdc */ - if (!kbdc_lock(sc->kbdc, TRUE)) - return (EIO); + /* don't let timeout routines in the keyboard driver to poll the kbdc */ + if (!kbdc_lock(sc->kbdc, TRUE)) + return (EIO); - /* save the current controller command byte */ - s = spltty(); - command_byte = get_controller_command_byte(sc->kbdc); + /* save the current controller command byte */ + s = spltty(); + command_byte = get_controller_command_byte(sc->kbdc); - /* enable the aux port and temporalily disable the keyboard */ - if ((command_byte == -1) - || !set_controller_command_byte(sc->kbdc, + /* enable the aux port and temporalily disable the keyboard */ + if (command_byte == -1 || !set_controller_command_byte(sc->kbdc, kbdc_get_device_mask(sc->kbdc), - KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT - | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* CONTROLLER ERROR; do you know how to get out of this? */ - kbdc_lock(sc->kbdc, FALSE); + KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT | + KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* CONTROLLER ERROR; do you know how to get out of this? */ + kbdc_lock(sc->kbdc, FALSE); + splx(s); + log(LOG_ERR, + "psm%d: unable to set the command byte (psmopen).\n", unit); + return (EIO); + } + /* + * Now that the keyboard controller is told not to generate + * the keyboard and mouse interrupts, call `splx()' to allow + * the other tty interrupts. The clock interrupt may also occur, + * but timeout routines will be blocked by the poll flag set + * via `kbdc_lock()' + */ splx(s); - log(LOG_ERR, "psm%d: unable to set the command byte (psmopen).\n", - unit); - return (EIO); - } - /* - * Now that the keyboard controller is told not to generate - * the keyboard and mouse interrupts, call `splx()' to allow - * the other tty interrupts. The clock interrupt may also occur, - * but timeout routines will be blocked by the poll flag set - * via `kbdc_lock()' - */ - splx(s); - - /* enable the mouse device */ - err = doopen(sc, command_byte); - /* done */ - if (err == 0) - sc->state |= PSM_OPEN; - kbdc_lock(sc->kbdc, FALSE); - return (err); + /* enable the mouse device */ + err = doopen(sc, command_byte); + + /* done */ + if (err == 0) + sc->state |= PSM_OPEN; + kbdc_lock(sc->kbdc, FALSE); + return (err); } static int psmclose(struct cdev *dev, int flag, int fmt, struct thread *td) { - int unit = PSM_UNIT(dev); - struct psm_softc *sc = PSM_SOFTC(unit); - int stat[3]; - int command_byte; - int s; + int unit = PSM_UNIT(dev); + struct psm_softc *sc = PSM_SOFTC(unit); + int stat[3]; + int command_byte; + int s; - /* don't let timeout routines in the keyboard driver to poll the kbdc */ - if (!kbdc_lock(sc->kbdc, TRUE)) - return (EIO); + /* don't let timeout routines in the keyboard driver to poll the kbdc */ + if (!kbdc_lock(sc->kbdc, TRUE)) + return (EIO); - /* save the current controller command byte */ - s = spltty(); - command_byte = get_controller_command_byte(sc->kbdc); - if (command_byte == -1) { - kbdc_lock(sc->kbdc, FALSE); + /* save the current controller command byte */ + s = spltty(); + command_byte = get_controller_command_byte(sc->kbdc); + if (command_byte == -1) { + kbdc_lock(sc->kbdc, FALSE); + splx(s); + return (EIO); + } + + /* disable the aux interrupt and temporalily disable the keyboard */ + if (!set_controller_command_byte(sc->kbdc, + kbdc_get_device_mask(sc->kbdc), + KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT | + KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + log(LOG_ERR, + "psm%d: failed to disable the aux int (psmclose).\n", unit); + /* CONTROLLER ERROR; + * NOTE: we shall force our way through. Because the only + * ill effect we shall see is that we may not be able + * to read ACK from the mouse, and it doesn't matter much + * so long as the mouse will accept the DISABLE command. + */ + } splx(s); - return (EIO); - } - /* disable the aux interrupt and temporalily disable the keyboard */ - if (!set_controller_command_byte(sc->kbdc, + /* stop the watchdog timer */ + untimeout(psmtimeout, (void *)(uintptr_t)sc, sc->callout); + callout_handle_init(&sc->callout); + + /* remove anything left in the output buffer */ + empty_aux_buffer(sc->kbdc, 10); + + /* disable the aux device, port and interrupt */ + if (sc->state & PSM_VALID) { + if (!disable_aux_dev(sc->kbdc)) { + /* MOUSE ERROR; + * NOTE: we don't return (error) and continue, + * pretending we have successfully disabled the device. + * It's OK because the interrupt routine will discard + * any data from the mouse hereafter. + */ + log(LOG_ERR, + "psm%d: failed to disable the device (psmclose).\n", + unit); + } + + if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) + log(LOG_DEBUG, + "psm%d: failed to get status (psmclose).\n", unit); + } + + if (!set_controller_command_byte(sc->kbdc, kbdc_get_device_mask(sc->kbdc), - KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT - | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - log(LOG_ERR, "psm%d: failed to disable the aux int (psmclose).\n", - unit); - /* CONTROLLER ERROR; - * NOTE: we shall force our way through. Because the only - * ill effect we shall see is that we may not be able - * to read ACK from the mouse, and it doesn't matter much - * so long as the mouse will accept the DISABLE command. - */ - } - splx(s); + (command_byte & KBD_KBD_CONTROL_BITS) | + KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* + * CONTROLLER ERROR; + * we shall ignore this error; see the above comment. + */ + log(LOG_ERR, + "psm%d: failed to disable the aux port (psmclose).\n", + unit); + } - /* stop the watchdog timer */ - untimeout(psmtimeout, (void *)(uintptr_t)sc, sc->callout); - callout_handle_init(&sc->callout); + /* remove anything left in the output buffer */ + empty_aux_buffer(sc->kbdc, 10); - /* remove anything left in the output buffer */ - empty_aux_buffer(sc->kbdc, 10); - - /* disable the aux device, port and interrupt */ - if (sc->state & PSM_VALID) { - if (!disable_aux_dev(sc->kbdc)) { - /* MOUSE ERROR; - * NOTE: we don't return error and continue, pretending - * we have successfully disabled the device. It's OK because - * the interrupt routine will discard any data from the mouse - * hereafter. - */ - log(LOG_ERR, "psm%d: failed to disable the device (psmclose).\n", - unit); - } - - if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) - log(LOG_DEBUG, "psm%d: failed to get status (psmclose).\n", unit); - } - - if (!set_controller_command_byte(sc->kbdc, - kbdc_get_device_mask(sc->kbdc), - (command_byte & KBD_KBD_CONTROL_BITS) - | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* CONTROLLER ERROR; - * we shall ignore this error; see the above comment. - */ - log(LOG_ERR, "psm%d: failed to disable the aux port (psmclose).\n", - unit); - } - - /* remove anything left in the output buffer */ - empty_aux_buffer(sc->kbdc, 10); - - /* close is almost always successful */ - sc->state &= ~PSM_OPEN; - kbdc_lock(sc->kbdc, FALSE); - device_unbusy(devclass_get_device(psm_devclass, unit)); - return (0); + /* close is almost always successful */ + sc->state &= ~PSM_OPEN; + kbdc_lock(sc->kbdc, FALSE); + device_unbusy(devclass_get_device(psm_devclass, unit)); + return (0); } static int -tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status, unsigned char *buf) +tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status, + u_char *buf) { - static unsigned char butmapps2[8] = { - 0, - MOUSE_PS2_BUTTON1DOWN, - MOUSE_PS2_BUTTON2DOWN, - MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN, - MOUSE_PS2_BUTTON3DOWN, - MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN, - MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN, - MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN, - }; - static unsigned char butmapmsc[8] = { - MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP, - MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP, - MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP, - MOUSE_MSC_BUTTON3UP, - MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP, - MOUSE_MSC_BUTTON2UP, - MOUSE_MSC_BUTTON1UP, - 0, - }; - int mapped; - int i; + static u_char butmapps2[8] = { + 0, + MOUSE_PS2_BUTTON1DOWN, + MOUSE_PS2_BUTTON2DOWN, + MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN, + MOUSE_PS2_BUTTON3DOWN, + MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN, + MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN, + MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN | + MOUSE_PS2_BUTTON3DOWN, + }; + static u_char butmapmsc[8] = { + MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | + MOUSE_MSC_BUTTON3UP, + MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP, + MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP, + MOUSE_MSC_BUTTON3UP, + MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP, + MOUSE_MSC_BUTTON2UP, + MOUSE_MSC_BUTTON1UP, + 0, + }; + int mapped; + int i; - if (sc->mode.level == PSM_LEVEL_BASE) { - mapped = status->button & ~MOUSE_BUTTON4DOWN; - if (status->button & MOUSE_BUTTON4DOWN) - mapped |= MOUSE_BUTTON1DOWN; - status->button = mapped; - buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS]; - i = imax(imin(status->dx, 255), -256); - if (i < 0) - buf[0] |= MOUSE_PS2_XNEG; - buf[1] = i; - i = imax(imin(status->dy, 255), -256); - if (i < 0) - buf[0] |= MOUSE_PS2_YNEG; - buf[2] = i; - return MOUSE_PS2_PACKETSIZE; - } else if (sc->mode.level == PSM_LEVEL_STANDARD) { - buf[0] = MOUSE_MSC_SYNC | butmapmsc[status->button & MOUSE_STDBUTTONS]; - i = imax(imin(status->dx, 255), -256); - buf[1] = i >> 1; - buf[3] = i - buf[1]; - i = imax(imin(status->dy, 255), -256); - buf[2] = i >> 1; - buf[4] = i - buf[2]; - i = imax(imin(status->dz, 127), -128); - buf[5] = (i >> 1) & 0x7f; - buf[6] = (i - (i >> 1)) & 0x7f; - buf[7] = (~status->button >> 3) & 0x7f; - return MOUSE_SYS_PACKETSIZE; - } - return pb->inputbytes; + if (sc->mode.level == PSM_LEVEL_BASE) { + mapped = status->button & ~MOUSE_BUTTON4DOWN; + if (status->button & MOUSE_BUTTON4DOWN) + mapped |= MOUSE_BUTTON1DOWN; + status->button = mapped; + buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS]; + i = imax(imin(status->dx, 255), -256); + if (i < 0) + buf[0] |= MOUSE_PS2_XNEG; + buf[1] = i; + i = imax(imin(status->dy, 255), -256); + if (i < 0) + buf[0] |= MOUSE_PS2_YNEG; + buf[2] = i; + return (MOUSE_PS2_PACKETSIZE); + } else if (sc->mode.level == PSM_LEVEL_STANDARD) { + buf[0] = MOUSE_MSC_SYNC | + butmapmsc[status->button & MOUSE_STDBUTTONS]; + i = imax(imin(status->dx, 255), -256); + buf[1] = i >> 1; + buf[3] = i - buf[1]; + i = imax(imin(status->dy, 255), -256); + buf[2] = i >> 1; + buf[4] = i - buf[2]; + i = imax(imin(status->dz, 127), -128); + buf[5] = (i >> 1) & 0x7f; + buf[6] = (i - (i >> 1)) & 0x7f; + buf[7] = (~status->button >> 3) & 0x7f; + return (MOUSE_SYS_PACKETSIZE); + } + return (pb->inputbytes); } static int psmread(struct cdev *dev, struct uio *uio, int flag) { - register struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); - unsigned char buf[PSM_SMALLBUFSIZE]; - int error = 0; - int s; - int l; + register struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); + u_char buf[PSM_SMALLBUFSIZE]; + int error = 0; + int s; + int l; - if ((sc->state & PSM_VALID) == 0) - return EIO; + if ((sc->state & PSM_VALID) == 0) + return (EIO); - /* block until mouse activity occured */ - s = spltty(); - while (sc->queue.count <= 0) { - if (PSM_NBLOCKIO(dev)) { - splx(s); - return EWOULDBLOCK; - } - sc->state |= PSM_ASLP; - error = tsleep( sc, PZERO | PCATCH, "psmrea", 0); - sc->state &= ~PSM_ASLP; - if (error) { - splx(s); - return error; - } else if ((sc->state & PSM_VALID) == 0) { - /* the device disappeared! */ - splx(s); - return EIO; + /* block until mouse activity occured */ + s = spltty(); + while (sc->queue.count <= 0) { + if (PSM_NBLOCKIO(dev)) { + splx(s); + return (EWOULDBLOCK); + } + sc->state |= PSM_ASLP; + error = tsleep(sc, PZERO | PCATCH, "psmrea", 0); + sc->state &= ~PSM_ASLP; + if (error) { + splx(s); + return (error); + } else if ((sc->state & PSM_VALID) == 0) { + /* the device disappeared! */ + splx(s); + return (EIO); + } } - } - splx(s); + splx(s); - /* copy data to the user land */ - while ((sc->queue.count > 0) && (uio->uio_resid > 0)) { - s = spltty(); - l = imin(sc->queue.count, uio->uio_resid); - if (l > sizeof(buf)) - l = sizeof(buf); - if (l > sizeof(sc->queue.buf) - sc->queue.head) { - bcopy(&sc->queue.buf[sc->queue.head], &buf[0], - sizeof(sc->queue.buf) - sc->queue.head); - bcopy(&sc->queue.buf[0], - &buf[sizeof(sc->queue.buf) - sc->queue.head], - l - (sizeof(sc->queue.buf) - sc->queue.head)); - } else { - bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l); + /* copy data to the user land */ + while ((sc->queue.count > 0) && (uio->uio_resid > 0)) { + s = spltty(); + l = imin(sc->queue.count, uio->uio_resid); + if (l > sizeof(buf)) + l = sizeof(buf); + if (l > sizeof(sc->queue.buf) - sc->queue.head) { + bcopy(&sc->queue.buf[sc->queue.head], &buf[0], + sizeof(sc->queue.buf) - sc->queue.head); + bcopy(&sc->queue.buf[0], + &buf[sizeof(sc->queue.buf) - sc->queue.head], + l - (sizeof(sc->queue.buf) - sc->queue.head)); + } else + bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l); + sc->queue.count -= l; + sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf); + splx(s); + error = uiomove(buf, l, uio); + if (error) + break; } - sc->queue.count -= l; - sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf); - splx(s); - error = uiomove(buf, l, uio); - if (error) - break; - } - return error; + return (error); } static int block_mouse_data(struct psm_softc *sc, int *c) { - int s; + int s; - if (!kbdc_lock(sc->kbdc, TRUE)) - return EIO; + if (!kbdc_lock(sc->kbdc, TRUE)) + return (EIO); - s = spltty(); - *c = get_controller_command_byte(sc->kbdc); - if ((*c == -1) - || !set_controller_command_byte(sc->kbdc, + s = spltty(); + *c = get_controller_command_byte(sc->kbdc); + if ((*c == -1) || !set_controller_command_byte(sc->kbdc, kbdc_get_device_mask(sc->kbdc), - KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT - | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { - /* this is CONTROLLER ERROR */ + KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT | + KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) { + /* this is CONTROLLER ERROR */ + splx(s); + kbdc_lock(sc->kbdc, FALSE); + return (EIO); + } + + /* + * The device may be in the middle of status data transmission. + * The transmission will be interrupted, thus, incomplete status + * data must be discarded. Although the aux interrupt is disabled + * at the keyboard controller level, at most one aux interrupt + * may have already been pending and a data byte is in the + * output buffer; throw it away. Note that the second argument + * to `empty_aux_buffer()' is zero, so that the call will just + * flush the internal queue. + * `psmintr()' will be invoked after `splx()' if an interrupt is + * pending; it will see no data and returns immediately. + */ + empty_aux_buffer(sc->kbdc, 0); /* flush the queue */ + read_aux_data_no_wait(sc->kbdc); /* throw away data if any */ + flushpackets(sc); splx(s); - kbdc_lock(sc->kbdc, FALSE); - return EIO; - } - /* - * The device may be in the middle of status data transmission. - * The transmission will be interrupted, thus, incomplete status - * data must be discarded. Although the aux interrupt is disabled - * at the keyboard controller level, at most one aux interrupt - * may have already been pending and a data byte is in the - * output buffer; throw it away. Note that the second argument - * to `empty_aux_buffer()' is zero, so that the call will just - * flush the internal queue. - * `psmintr()' will be invoked after `splx()' if an interrupt is - * pending; it will see no data and returns immediately. - */ - empty_aux_buffer(sc->kbdc, 0); /* flush the queue */ - read_aux_data_no_wait(sc->kbdc); /* throw away data if any */ - flushpackets(sc); - splx(s); - - return 0; + return (0); } static void dropqueue(struct psm_softc *sc) { - sc->queue.count = 0; - sc->queue.head = 0; - sc->queue.tail = 0; + sc->queue.count = 0; + sc->queue.head = 0; + sc->queue.tail = 0; if ((sc->state & PSM_SOFTARMED) != 0) { sc->state &= ~PSM_SOFTARMED; untimeout(psmsoftintr, (void *)(uintptr_t)sc, sc->softcallout); @@ -1689,386 +1714,398 @@ flushpackets(struct psm_softc *sc) static int unblock_mouse_data(struct psm_softc *sc, int c) { - int error = 0; + int error = 0; - /* - * We may have seen a part of status data during `set_mouse_XXX()'. - * they have been queued; flush it. - */ - empty_aux_buffer(sc->kbdc, 0); + /* + * We may have seen a part of status data during `set_mouse_XXX()'. + * they have been queued; flush it. + */ + empty_aux_buffer(sc->kbdc, 0); - /* restore ports and interrupt */ - if (!set_controller_command_byte(sc->kbdc, - kbdc_get_device_mask(sc->kbdc), + /* restore ports and interrupt */ + if (!set_controller_command_byte(sc->kbdc, + kbdc_get_device_mask(sc->kbdc), c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) { - /* CONTROLLER ERROR; this is serious, we may have - * been left with the inaccessible keyboard and - * the disabled mouse interrupt. - */ - error = EIO; - } + /* + * CONTROLLER ERROR; this is serious, we may have + * been left with the inaccessible keyboard and + * the disabled mouse interrupt. + */ + error = EIO; + } - kbdc_lock(sc->kbdc, FALSE); - return error; + kbdc_lock(sc->kbdc, FALSE); + return (error); } static int psmwrite(struct cdev *dev, struct uio *uio, int flag) { - register struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); - u_char buf[PSM_SMALLBUFSIZE]; - int error = 0, i, l; + register struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); + u_char buf[PSM_SMALLBUFSIZE]; + int error = 0, i, l; - if ((sc->state & PSM_VALID) == 0) - return (EIO); + if ((sc->state & PSM_VALID) == 0) + return (EIO); - if (sc->mode.level < PSM_LEVEL_NATIVE) - return (ENODEV); + if (sc->mode.level < PSM_LEVEL_NATIVE) + return (ENODEV); - /* copy data from the user land */ - while (uio->uio_resid > 0) { - l = imin(PSM_SMALLBUFSIZE, uio->uio_resid); - error = uiomove(buf, l, uio); - if (error) - break; - for (i = 0; i < l; i++) { - VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i])); - if (!write_aux_command(sc->kbdc, buf[i])) { - VLOG(2, (LOG_DEBUG, "psm: cmd 0x%x failed.\n", buf[i])); - return (reinitialize(sc, FALSE)); - } + /* copy data from the user land */ + while (uio->uio_resid > 0) { + l = imin(PSM_SMALLBUFSIZE, uio->uio_resid); + error = uiomove(buf, l, uio); + if (error) + break; + for (i = 0; i < l; i++) { + VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i])); + if (!write_aux_command(sc->kbdc, buf[i])) { + VLOG(2, (LOG_DEBUG, + "psm: cmd 0x%x failed.\n", buf[i])); + return (reinitialize(sc, FALSE)); + } + } } - } - return (error); + return (error); } static int -psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) +psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, + struct thread *td) { - struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); - mousemode_t mode; - mousestatus_t status; + struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); + mousemode_t mode; + mousestatus_t status; #if (defined(MOUSE_GETVARS)) - mousevar_t *var; + mousevar_t *var; #endif - mousedata_t *data; - int stat[3]; - int command_byte; - int error = 0; - int s; + mousedata_t *data; + int stat[3]; + int command_byte; + int error = 0; + int s; - /* Perform IOCTL command */ - switch (cmd) { + /* Perform IOCTL command */ + switch (cmd) { - case OLD_MOUSE_GETHWINFO: - s = spltty(); - ((old_mousehw_t *)addr)->buttons = sc->hw.buttons; - ((old_mousehw_t *)addr)->iftype = sc->hw.iftype; - ((old_mousehw_t *)addr)->type = sc->hw.type; - ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff; - splx(s); - break; + case OLD_MOUSE_GETHWINFO: + s = spltty(); + ((old_mousehw_t *)addr)->buttons = sc->hw.buttons; + ((old_mousehw_t *)addr)->iftype = sc->hw.iftype; + ((old_mousehw_t *)addr)->type = sc->hw.type; + ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff; + splx(s); + break; - case MOUSE_GETHWINFO: - s = spltty(); - *(mousehw_t *)addr = sc->hw; - if (sc->mode.level == PSM_LEVEL_BASE) - ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC; - splx(s); - break; + case MOUSE_GETHWINFO: + s = spltty(); + *(mousehw_t *)addr = sc->hw; + if (sc->mode.level == PSM_LEVEL_BASE) + ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC; + splx(s); + break; - case MOUSE_SYN_GETHWINFO: - s = spltty(); - if (synaptics_support && sc->hw.model == MOUSE_MODEL_SYNAPTICS) - *(synapticshw_t *)addr = sc->synhw; - else - error = EINVAL; - splx(s); - break; + case MOUSE_SYN_GETHWINFO: + s = spltty(); + if (synaptics_support && sc->hw.model == MOUSE_MODEL_SYNAPTICS) + *(synapticshw_t *)addr = sc->synhw; + else + error = EINVAL; + splx(s); + break; - case OLD_MOUSE_GETMODE: - s = spltty(); - switch (sc->mode.level) { - case PSM_LEVEL_BASE: - ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; - break; - case PSM_LEVEL_STANDARD: - ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; - break; - case PSM_LEVEL_NATIVE: - ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; - break; - } - ((old_mousemode_t *)addr)->rate = sc->mode.rate; - ((old_mousemode_t *)addr)->resolution = sc->mode.resolution; - ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor; - splx(s); - break; + case OLD_MOUSE_GETMODE: + s = spltty(); + switch (sc->mode.level) { + case PSM_LEVEL_BASE: + ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; + break; + case PSM_LEVEL_STANDARD: + ((old_mousemode_t *)addr)->protocol = + MOUSE_PROTO_SYSMOUSE; + break; + case PSM_LEVEL_NATIVE: + ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; + break; + } + ((old_mousemode_t *)addr)->rate = sc->mode.rate; + ((old_mousemode_t *)addr)->resolution = sc->mode.resolution; + ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor; + splx(s); + break; - case MOUSE_GETMODE: - s = spltty(); - *(mousemode_t *)addr = sc->mode; - if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { - ((mousemode_t *)addr)->syncmask[0] = 0; - ((mousemode_t *)addr)->syncmask[1] = 0; - } - ((mousemode_t *)addr)->resolution = - MOUSE_RES_LOW - sc->mode.resolution; - switch (sc->mode.level) { - case PSM_LEVEL_BASE: - ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; - ((mousemode_t *)addr)->packetsize = MOUSE_PS2_PACKETSIZE; - break; - case PSM_LEVEL_STANDARD: - ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; - ((mousemode_t *)addr)->packetsize = MOUSE_SYS_PACKETSIZE; - ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK; - ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC; - break; - case PSM_LEVEL_NATIVE: - /* FIXME: this isn't quite correct... XXX */ - ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; - break; - } - splx(s); - break; + case MOUSE_GETMODE: + s = spltty(); + *(mousemode_t *)addr = sc->mode; + if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { + ((mousemode_t *)addr)->syncmask[0] = 0; + ((mousemode_t *)addr)->syncmask[1] = 0; + } + ((mousemode_t *)addr)->resolution = + MOUSE_RES_LOW - sc->mode.resolution; + switch (sc->mode.level) { + case PSM_LEVEL_BASE: + ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; + ((mousemode_t *)addr)->packetsize = + MOUSE_PS2_PACKETSIZE; + break; + case PSM_LEVEL_STANDARD: + ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE; + ((mousemode_t *)addr)->packetsize = + MOUSE_SYS_PACKETSIZE; + ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK; + ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC; + break; + case PSM_LEVEL_NATIVE: + /* FIXME: this isn't quite correct... XXX */ + ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2; + break; + } + splx(s); + break; - case OLD_MOUSE_SETMODE: - case MOUSE_SETMODE: - if (cmd == OLD_MOUSE_SETMODE) { - mode.rate = ((old_mousemode_t *)addr)->rate; - /* - * resolution old I/F new I/F - * default 0 0 - * low 1 -2 - * medium low 2 -3 - * medium high 3 -4 - * high 4 -5 - */ - if (((old_mousemode_t *)addr)->resolution > 0) - mode.resolution = -((old_mousemode_t *)addr)->resolution - 1; - else - mode.resolution = 0; - mode.accelfactor = ((old_mousemode_t *)addr)->accelfactor; - mode.level = -1; - } else { - mode = *(mousemode_t *)addr; - } + case OLD_MOUSE_SETMODE: + case MOUSE_SETMODE: + if (cmd == OLD_MOUSE_SETMODE) { + mode.rate = ((old_mousemode_t *)addr)->rate; + /* + * resolution old I/F new I/F + * default 0 0 + * low 1 -2 + * medium low 2 -3 + * medium high 3 -4 + * high 4 -5 + */ + if (((old_mousemode_t *)addr)->resolution > 0) + mode.resolution = + -((old_mousemode_t *)addr)->resolution - 1; + else + mode.resolution = 0; + mode.accelfactor = + ((old_mousemode_t *)addr)->accelfactor; + mode.level = -1; + } else + mode = *(mousemode_t *)addr; - /* adjust and validate parameters. */ - if (mode.rate > UCHAR_MAX) - return EINVAL; - if (mode.rate == 0) - mode.rate = sc->dflt_mode.rate; - else if (mode.rate == -1) - /* don't change the current setting */ - ; - else if (mode.rate < 0) - return EINVAL; - if (mode.resolution >= UCHAR_MAX) - return EINVAL; - if (mode.resolution >= 200) - mode.resolution = MOUSE_RES_HIGH; - else if (mode.resolution >= 100) - mode.resolution = MOUSE_RES_MEDIUMHIGH; - else if (mode.resolution >= 50) - mode.resolution = MOUSE_RES_MEDIUMLOW; - else if (mode.resolution > 0) - mode.resolution = MOUSE_RES_LOW; - if (mode.resolution == MOUSE_RES_DEFAULT) - mode.resolution = sc->dflt_mode.resolution; - else if (mode.resolution == -1) - /* don't change the current setting */ - ; - else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ - mode.resolution = MOUSE_RES_LOW - mode.resolution; - if (mode.level == -1) - /* don't change the current setting */ - mode.level = sc->mode.level; - else if ((mode.level < PSM_LEVEL_MIN) || (mode.level > PSM_LEVEL_MAX)) - return EINVAL; - if (mode.accelfactor == -1) - /* don't change the current setting */ - mode.accelfactor = sc->mode.accelfactor; - else if (mode.accelfactor < 0) - return EINVAL; + /* adjust and validate parameters. */ + if (mode.rate > UCHAR_MAX) + return (EINVAL); + if (mode.rate == 0) + mode.rate = sc->dflt_mode.rate; + else if (mode.rate == -1) + /* don't change the current setting */ + ; + else if (mode.rate < 0) + return (EINVAL); + if (mode.resolution >= UCHAR_MAX) + return (EINVAL); + if (mode.resolution >= 200) + mode.resolution = MOUSE_RES_HIGH; + else if (mode.resolution >= 100) + mode.resolution = MOUSE_RES_MEDIUMHIGH; + else if (mode.resolution >= 50) + mode.resolution = MOUSE_RES_MEDIUMLOW; + else if (mode.resolution > 0) + mode.resolution = MOUSE_RES_LOW; + if (mode.resolution == MOUSE_RES_DEFAULT) + mode.resolution = sc->dflt_mode.resolution; + else if (mode.resolution == -1) + /* don't change the current setting */ + ; + else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ + mode.resolution = MOUSE_RES_LOW - mode.resolution; + if (mode.level == -1) + /* don't change the current setting */ + mode.level = sc->mode.level; + else if ((mode.level < PSM_LEVEL_MIN) || + (mode.level > PSM_LEVEL_MAX)) + return (EINVAL); + if (mode.accelfactor == -1) + /* don't change the current setting */ + mode.accelfactor = sc->mode.accelfactor; + else if (mode.accelfactor < 0) + return (EINVAL); - /* don't allow anybody to poll the keyboard controller */ - error = block_mouse_data(sc, &command_byte); - if (error) - return error; + /* don't allow anybody to poll the keyboard controller */ + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); - /* set mouse parameters */ - if (mode.rate > 0) - mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate); - if (mode.resolution >= 0) - mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution); - set_mouse_scaling(sc->kbdc, 1); - get_mouse_status(sc->kbdc, stat, 0, 3); + /* set mouse parameters */ + if (mode.rate > 0) + mode.rate = set_mouse_sampling_rate(sc->kbdc, + mode.rate); + if (mode.resolution >= 0) + mode.resolution = + set_mouse_resolution(sc->kbdc, mode.resolution); + set_mouse_scaling(sc->kbdc, 1); + get_mouse_status(sc->kbdc, stat, 0, 3); - s = spltty(); - sc->mode.rate = mode.rate; - sc->mode.resolution = mode.resolution; - sc->mode.accelfactor = mode.accelfactor; - sc->mode.level = mode.level; - splx(s); + s = spltty(); + sc->mode.rate = mode.rate; + sc->mode.resolution = mode.resolution; + sc->mode.accelfactor = mode.accelfactor; + sc->mode.level = mode.level; + splx(s); - unblock_mouse_data(sc, command_byte); - break; + unblock_mouse_data(sc, command_byte); + break; - case MOUSE_GETLEVEL: - *(int *)addr = sc->mode.level; - break; + case MOUSE_GETLEVEL: + *(int *)addr = sc->mode.level; + break; - case MOUSE_SETLEVEL: - if ((*(int *)addr < PSM_LEVEL_MIN) || (*(int *)addr > PSM_LEVEL_MAX)) - return EINVAL; - sc->mode.level = *(int *)addr; - break; + case MOUSE_SETLEVEL: + if ((*(int *)addr < PSM_LEVEL_MIN) || + (*(int *)addr > PSM_LEVEL_MAX)) + return (EINVAL); + sc->mode.level = *(int *)addr; + break; - case MOUSE_GETSTATUS: - s = spltty(); - status = sc->status; - sc->status.flags = 0; - sc->status.obutton = sc->status.button; - sc->status.button = 0; - sc->status.dx = 0; - sc->status.dy = 0; - sc->status.dz = 0; - splx(s); - *(mousestatus_t *)addr = status; - break; + case MOUSE_GETSTATUS: + s = spltty(); + status = sc->status; + sc->status.flags = 0; + sc->status.obutton = sc->status.button; + sc->status.button = 0; + sc->status.dx = 0; + sc->status.dy = 0; + sc->status.dz = 0; + splx(s); + *(mousestatus_t *)addr = status; + break; #if (defined(MOUSE_GETVARS)) - case MOUSE_GETVARS: - var = (mousevar_t *)addr; - bzero(var, sizeof(*var)); - s = spltty(); - var->var[0] = MOUSE_VARS_PS2_SIG; - var->var[1] = sc->config; - var->var[2] = sc->flags; - splx(s); - break; + case MOUSE_GETVARS: + var = (mousevar_t *)addr; + bzero(var, sizeof(*var)); + s = spltty(); + var->var[0] = MOUSE_VARS_PS2_SIG; + var->var[1] = sc->config; + var->var[2] = sc->flags; + splx(s); + break; - case MOUSE_SETVARS: - return ENODEV; + case MOUSE_SETVARS: + return (ENODEV); #endif /* MOUSE_GETVARS */ - case MOUSE_READSTATE: - case MOUSE_READDATA: - data = (mousedata_t *)addr; - if (data->len > sizeof(data->buf)/sizeof(data->buf[0])) - return EINVAL; + case MOUSE_READSTATE: + case MOUSE_READDATA: + data = (mousedata_t *)addr; + if (data->len > sizeof(data->buf)/sizeof(data->buf[0])) + return (EINVAL); - error = block_mouse_data(sc, &command_byte); - if (error) - return error; - if ((data->len = get_mouse_status(sc->kbdc, data->buf, - (cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0) - error = EIO; - unblock_mouse_data(sc, command_byte); - break; + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); + if ((data->len = get_mouse_status(sc->kbdc, data->buf, + (cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0) + error = EIO; + unblock_mouse_data(sc, command_byte); + break; #if (defined(MOUSE_SETRESOLUTION)) - case MOUSE_SETRESOLUTION: - mode.resolution = *(int *)addr; - if (mode.resolution >= UCHAR_MAX) - return EINVAL; - else if (mode.resolution >= 200) - mode.resolution = MOUSE_RES_HIGH; - else if (mode.resolution >= 100) - mode.resolution = MOUSE_RES_MEDIUMHIGH; - else if (mode.resolution >= 50) - mode.resolution = MOUSE_RES_MEDIUMLOW; - else if (mode.resolution > 0) - mode.resolution = MOUSE_RES_LOW; - if (mode.resolution == MOUSE_RES_DEFAULT) - mode.resolution = sc->dflt_mode.resolution; - else if (mode.resolution == -1) - mode.resolution = sc->mode.resolution; - else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ - mode.resolution = MOUSE_RES_LOW - mode.resolution; + case MOUSE_SETRESOLUTION: + mode.resolution = *(int *)addr; + if (mode.resolution >= UCHAR_MAX) + return (EINVAL); + else if (mode.resolution >= 200) + mode.resolution = MOUSE_RES_HIGH; + else if (mode.resolution >= 100) + mode.resolution = MOUSE_RES_MEDIUMHIGH; + else if (mode.resolution >= 50) + mode.resolution = MOUSE_RES_MEDIUMLOW; + else if (mode.resolution > 0) + mode.resolution = MOUSE_RES_LOW; + if (mode.resolution == MOUSE_RES_DEFAULT) + mode.resolution = sc->dflt_mode.resolution; + else if (mode.resolution == -1) + mode.resolution = sc->mode.resolution; + else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */ + mode.resolution = MOUSE_RES_LOW - mode.resolution; - error = block_mouse_data(sc, &command_byte); - if (error) - return error; - sc->mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution); - if (sc->mode.resolution != mode.resolution) - error = EIO; - unblock_mouse_data(sc, command_byte); - break; + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); + sc->mode.resolution = + set_mouse_resolution(sc->kbdc, mode.resolution); + if (sc->mode.resolution != mode.resolution) + error = EIO; + unblock_mouse_data(sc, command_byte); + break; #endif /* MOUSE_SETRESOLUTION */ #if (defined(MOUSE_SETRATE)) - case MOUSE_SETRATE: - mode.rate = *(int *)addr; - if (mode.rate > UCHAR_MAX) - return EINVAL; - if (mode.rate == 0) - mode.rate = sc->dflt_mode.rate; - else if (mode.rate < 0) - mode.rate = sc->mode.rate; + case MOUSE_SETRATE: + mode.rate = *(int *)addr; + if (mode.rate > UCHAR_MAX) + return (EINVAL); + if (mode.rate == 0) + mode.rate = sc->dflt_mode.rate; + else if (mode.rate < 0) + mode.rate = sc->mode.rate; - error = block_mouse_data(sc, &command_byte); - if (error) - return error; - sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate); - if (sc->mode.rate != mode.rate) - error = EIO; - unblock_mouse_data(sc, command_byte); - break; + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); + sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate); + if (sc->mode.rate != mode.rate) + error = EIO; + unblock_mouse_data(sc, command_byte); + break; #endif /* MOUSE_SETRATE */ #if (defined(MOUSE_SETSCALING)) - case MOUSE_SETSCALING: - if ((*(int *)addr <= 0) || (*(int *)addr > 2)) - return EINVAL; + case MOUSE_SETSCALING: + if ((*(int *)addr <= 0) || (*(int *)addr > 2)) + return (EINVAL); - error = block_mouse_data(sc, &command_byte); - if (error) - return error; - if (!set_mouse_scaling(sc->kbdc, *(int *)addr)) - error = EIO; - unblock_mouse_data(sc, command_byte); - break; + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); + if (!set_mouse_scaling(sc->kbdc, *(int *)addr)) + error = EIO; + unblock_mouse_data(sc, command_byte); + break; #endif /* MOUSE_SETSCALING */ #if (defined(MOUSE_GETHWID)) - case MOUSE_GETHWID: - error = block_mouse_data(sc, &command_byte); - if (error) - return error; - sc->hw.hwid &= ~0x00ff; - sc->hw.hwid |= get_aux_id(sc->kbdc); - *(int *)addr = sc->hw.hwid & 0x00ff; - unblock_mouse_data(sc, command_byte); - break; + case MOUSE_GETHWID: + error = block_mouse_data(sc, &command_byte); + if (error) + return (error); + sc->hw.hwid &= ~0x00ff; + sc->hw.hwid |= get_aux_id(sc->kbdc); + *(int *)addr = sc->hw.hwid & 0x00ff; + unblock_mouse_data(sc, command_byte); + break; #endif /* MOUSE_GETHWID */ - default: - return ENOTTY; - } + default: + return (ENOTTY); + } - return error; + return (error); } static void psmtimeout(void *arg) { - struct psm_softc *sc; - int s; + struct psm_softc *sc; + int s; - sc = (struct psm_softc *)arg; - s = spltty(); - if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) { - VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit)); - psmintr(sc); - kbdc_lock(sc->kbdc, FALSE); - } - sc->watchdog = TRUE; - splx(s); - sc->callout = timeout(psmtimeout, (void *)(uintptr_t)sc, hz); + sc = (struct psm_softc *)arg; + s = spltty(); + if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) { + VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit)); + psmintr(sc); + kbdc_lock(sc->kbdc, FALSE); + } + sc->watchdog = TRUE; + splx(s); + sc->callout = timeout(psmtimeout, (void *)(uintptr_t)sc, hz); } /* Add all sysctls under the debug.psm and hw.psm nodes */ @@ -2088,7 +2125,8 @@ SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0, ""); static int psmusecs = 500000; SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0, ""); static int pkterrthresh = 2; -SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0, ""); +SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, + 0, ""); static int tap_threshold = PSM_TAP_THRESHOLD; SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0, ""); @@ -2098,849 +2136,898 @@ SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0, ""); static void psmintr(void *arg) { - struct psm_softc *sc = arg; - struct timeval now; - int c; - packetbuf_t *pb; + struct psm_softc *sc = arg; + struct timeval now; + int c; + packetbuf_t *pb; - /* read until there is nothing to read */ - while((c = read_aux_data_no_wait(sc->kbdc)) != -1) { - - pb = &sc->pqueue[sc->pqueue_end]; - /* discard the byte if the device is not open */ - if ((sc->state & PSM_OPEN) == 0) - continue; - - getmicrouptime(&now); - if ((pb->inputbytes > 0) && timevalcmp(&now, &sc->inputtimeout, >)) { - VLOG(3, (LOG_DEBUG, "psmintr: delay too long; " - "resetting byte count\n")); - pb->inputbytes = 0; - sc->syncerrors = 0; - sc->pkterrors = 0; - } - sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT/1000000; - sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT%1000000; - timevaladd(&sc->inputtimeout, &now); + /* read until there is nothing to read */ + while((c = read_aux_data_no_wait(sc->kbdc)) != -1) { + pb = &sc->pqueue[sc->pqueue_end]; - pb->ipacket[pb->inputbytes++] = c; + /* discard the byte if the device is not open */ + if ((sc->state & PSM_OPEN) == 0) + continue; - if (sc->mode.level == PSM_LEVEL_NATIVE) { - VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0])); - sc->syncerrors = 0; - sc->pkterrors = 0; - goto NEXT; - } else { - if (pb->inputbytes < sc->mode.packetsize) - continue; - - VLOG(4, (LOG_DEBUG, "psmintr: %02x %02x %02x %02x %02x %02x\n", - pb->ipacket[0], pb->ipacket[1], pb->ipacket[2], - pb->ipacket[3], pb->ipacket[4], pb->ipacket[5])); - } - - c = pb->ipacket[0]; - - if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { - sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]); - sc->flags &= ~PSM_NEED_SYNCBITS; - VLOG(2, (LOG_DEBUG, "psmintr: Sync bytes now %04x,%04x\n", - sc->mode.syncmask[0], sc->mode.syncmask[0])); - } else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) { - VLOG(3, (LOG_DEBUG, "psmintr: out of sync (%04x != %04x) %d" - " cmds since last error.\n", - c & sc->mode.syncmask[0], sc->mode.syncmask[1], - sc->cmdcount - sc->lasterr)); - sc->lasterr = sc->cmdcount; - /* - * The sync byte test is a weak measure of packet - * validity. Conservatively discard any input yet - * to be seen by userland when we detect a sync - * error since there is a good chance some of - * the queued packets have undetected errors. - */ - dropqueue(sc); - if (sc->syncerrors == 0) - sc->pkterrors++; - ++sc->syncerrors; - sc->lastinputerr = now; - if (sc->syncerrors >= sc->mode.packetsize * 2 || - sc->pkterrors >= pkterrthresh) { - - /* - * If we've failed to find a single sync byte in 2 - * packets worth of data, or we've seen persistent - * packet errors during the validation period, - * reinitialize the mouse in hopes of returning it - * to the expected mode. - */ - VLOG(3, (LOG_DEBUG, "psmintr: reset the mouse.\n")); - reinitialize(sc, TRUE); - } else if (sc->syncerrors == sc->mode.packetsize) { - - /* - * Try a soft reset after searching for a sync - * byte through a packet length of bytes. - */ - VLOG(3, (LOG_DEBUG, "psmintr: re-enable the mouse.\n")); - pb->inputbytes = 0; - disable_aux_dev(sc->kbdc); - enable_aux_dev(sc->kbdc); - } else { - VLOG(3, (LOG_DEBUG, "psmintr: discard a byte (%d)\n", - sc->syncerrors)); - pb->inputbytes--; - bcopy(&pb->ipacket[1], &pb->ipacket[0], pb->inputbytes); - } - continue; - } - - /* - * We have what appears to be a valid packet. - * Reset the error counters. - */ - sc->syncerrors = 0; - - /* - * Drop even good packets if they occur within a timeout - * period of a sync error. This allows the detection of - * a change in the mouse's packet mode without exposing - * erratic mouse behavior to the user. Some KVMs forget - * enhanced mouse modes during switch events. - */ - if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs, &now)) { - pb->inputbytes = 0; - continue; - } - - /* - * Now that we're out of the validation period, reset - * the packet error count. - */ - sc->pkterrors = 0; - - sc->cmdcount++; -NEXT: - if (++sc->pqueue_end >= PSM_PACKETQUEUE) - sc->pqueue_end = 0; - /* - * If we've filled the queue then call the softintr ourselves, - * otherwise schedule the interrupt for later. - */ - if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) || - (sc->pqueue_end == sc->pqueue_start)) { - if ((sc->state & PSM_SOFTARMED) != 0) { - sc->state &= ~PSM_SOFTARMED; - untimeout(psmsoftintr, arg, sc->softcallout); + getmicrouptime(&now); + if ((pb->inputbytes > 0) && + timevalcmp(&now, &sc->inputtimeout, >)) { + VLOG(3, (LOG_DEBUG, "psmintr: delay too long; " + "resetting byte count\n")); + pb->inputbytes = 0; + sc->syncerrors = 0; + sc->pkterrors = 0; + } + sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000; + sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000; + timevaladd(&sc->inputtimeout, &now); + + pb->ipacket[pb->inputbytes++] = c; + + if (sc->mode.level == PSM_LEVEL_NATIVE) { + VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0])); + sc->syncerrors = 0; + sc->pkterrors = 0; + goto next; + } else { + if (pb->inputbytes < sc->mode.packetsize) + continue; + + VLOG(4, (LOG_DEBUG, + "psmintr: %02x %02x %02x %02x %02x %02x\n", + pb->ipacket[0], pb->ipacket[1], pb->ipacket[2], + pb->ipacket[3], pb->ipacket[4], pb->ipacket[5])); + } + + c = pb->ipacket[0]; + + if ((sc->flags & PSM_NEED_SYNCBITS) != 0) { + sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]); + sc->flags &= ~PSM_NEED_SYNCBITS; + VLOG(2, (LOG_DEBUG, + "psmintr: Sync bytes now %04x,%04x\n", + sc->mode.syncmask[0], sc->mode.syncmask[0])); + } else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) { + VLOG(3, (LOG_DEBUG, "psmintr: out of sync " + "(%04x != %04x) %d cmds since last error.\n", + c & sc->mode.syncmask[0], sc->mode.syncmask[1], + sc->cmdcount - sc->lasterr)); + sc->lasterr = sc->cmdcount; + /* + * The sync byte test is a weak measure of packet + * validity. Conservatively discard any input yet + * to be seen by userland when we detect a sync + * error since there is a good chance some of + * the queued packets have undetected errors. + */ + dropqueue(sc); + if (sc->syncerrors == 0) + sc->pkterrors++; + ++sc->syncerrors; + sc->lastinputerr = now; + if (sc->syncerrors >= sc->mode.packetsize * 2 || + sc->pkterrors >= pkterrthresh) { + /* + * If we've failed to find a single sync byte + * in 2 packets worth of data, or we've seen + * persistent packet errors during the + * validation period, reinitialize the mouse + * in hopes of returning it to the expected + * mode. + */ + VLOG(3, (LOG_DEBUG, + "psmintr: reset the mouse.\n")); + reinitialize(sc, TRUE); + } else if (sc->syncerrors == sc->mode.packetsize) { + /* + * Try a soft reset after searching for a sync + * byte through a packet length of bytes. + */ + VLOG(3, (LOG_DEBUG, + "psmintr: re-enable the mouse.\n")); + pb->inputbytes = 0; + disable_aux_dev(sc->kbdc); + enable_aux_dev(sc->kbdc); + } else { + VLOG(3, (LOG_DEBUG, + "psmintr: discard a byte (%d)\n", + sc->syncerrors)); + pb->inputbytes--; + bcopy(&pb->ipacket[1], &pb->ipacket[0], + pb->inputbytes); + } + continue; + } + + /* + * We have what appears to be a valid packet. + * Reset the error counters. + */ + sc->syncerrors = 0; + + /* + * Drop even good packets if they occur within a timeout + * period of a sync error. This allows the detection of + * a change in the mouse's packet mode without exposing + * erratic mouse behavior to the user. Some KVMs forget + * enhanced mouse modes during switch events. + */ + if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs, + &now)) { + pb->inputbytes = 0; + continue; + } + + /* + * Now that we're out of the validation period, reset + * the packet error count. + */ + sc->pkterrors = 0; + + sc->cmdcount++; +next: + if (++sc->pqueue_end >= PSM_PACKETQUEUE) + sc->pqueue_end = 0; + /* + * If we've filled the queue then call the softintr ourselves, + * otherwise schedule the interrupt for later. + */ + if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) || + (sc->pqueue_end == sc->pqueue_start)) { + if ((sc->state & PSM_SOFTARMED) != 0) { + sc->state &= ~PSM_SOFTARMED; + untimeout(psmsoftintr, arg, sc->softcallout); + } + psmsoftintr(arg); + } else if ((sc->state & PSM_SOFTARMED) == 0) { + sc->state |= PSM_SOFTARMED; + sc->softcallout = timeout(psmsoftintr, arg, + psmhz < 1 ? 1 : (hz/psmhz)); } - psmsoftintr(arg); - } else if ((sc->state & PSM_SOFTARMED) == 0) { - sc->state |= PSM_SOFTARMED; - sc->softcallout = timeout(psmsoftintr, arg, - psmhz < 1 ? 1 : (hz/psmhz)); } - } } static void -psmsoftintr(void *arg) +proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, + int *x, int *y, int *z) { - /* - * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN) - * into `mousestatus' button bits (MOUSE_BUTTON?DOWN). - */ - static int butmap[8] = { - 0, - MOUSE_BUTTON1DOWN, - MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON2DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, - MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN - }; - static int butmap_versapad[8] = { - 0, - MOUSE_BUTTON3DOWN, - 0, - MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, - MOUSE_BUTTON1DOWN, - MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN - }; - static int touchpad_buttons; - static int guest_buttons; - register struct psm_softc *sc = arg; - mousestatus_t ms; - int w, x, y, z; - int c; - int l; - int x0, y0, xavg, yavg, xsensitivity, ysensitivity, sensitivity = 0; - int s; - packetbuf_t *pb; - getmicrouptime(&sc->lastsoftintr); - - s = spltty(); - - do { - - pb = &sc->pqueue[sc->pqueue_start]; - - if (sc->mode.level == PSM_LEVEL_NATIVE) - goto NEXT_NATIVE; - - c = pb->ipacket[0]; - /* - * A kludge for Kensington device! - * The MSB of the horizontal count appears to be stored in - * a strange place. + /* + * PS2++ protocl packet + * + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 1: * 1 p3 p2 1 * * * + * byte 2: c1 c2 p1 p0 d1 d0 1 0 + * + * p3-p0: packet type + * c1, c2: c1 & c2 == 1, if p2 == 0 + * c1 & c2 == 0, if p2 == 1 + * + * packet type: 0 (device type) + * See comments in enable_mmanplus() below. + * + * packet type: 1 (wheel data) + * + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 3: h * B5 B4 s d2 d1 d0 + * + * h: 1, if horizontal roller data + * 0, if vertical roller data + * B4, B5: button 4 and 5 + * s: sign bit + * d2-d0: roller data + * + * packet type: 2 (reserved) */ - if (sc->hw.model == MOUSE_MODEL_THINK) - pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0; - - /* ignore the overflow bits... */ - x = (c & MOUSE_PS2_XNEG) ? pb->ipacket[1] - 256 : pb->ipacket[1]; - y = (c & MOUSE_PS2_YNEG) ? pb->ipacket[2] - 256 : pb->ipacket[2]; - z = 0; - ms.obutton = sc->button; /* previous button state */ - ms.button = butmap[c & MOUSE_PS2_BUTTONS]; - /* `tapping' action */ - if (sc->config & PSM_CONFIG_FORCETAP) - ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN; - - switch (sc->hw.model) { - - case MOUSE_MODEL_EXPLORER: - /* - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 1: oy ox sy sx 1 M R L - * byte 2: x x x x x x x x - * byte 3: y y y y y y y y - * byte 4: * * S2 S1 s d2 d1 d0 - * - * L, M, R, S1, S2: left, middle, right and side buttons - * s: wheel data sign bit - * d2-d0: wheel data - */ - z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) - ? (pb->ipacket[3] & 0x0f) - 16 : (pb->ipacket[3] & 0x0f); - ms.button |= (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) - ? MOUSE_BUTTON4DOWN : 0; - ms.button |= (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) - ? MOUSE_BUTTON5DOWN : 0; - break; - - case MOUSE_MODEL_INTELLI: - case MOUSE_MODEL_NET: - /* wheel data is in the fourth byte */ - z = (char)pb->ipacket[3]; - /* some mice may send 7 when there is no Z movement?! XXX */ - if ((z >= 7) || (z <= -7)) - z = 0; - /* some compatible mice have additional buttons */ - ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) - ? MOUSE_BUTTON4DOWN : 0; - ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) - ? MOUSE_BUTTON5DOWN : 0; - break; - - case MOUSE_MODEL_MOUSEMANPLUS: - /* - * PS2++ protocl packet - * - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 1: * 1 p3 p2 1 * * * - * byte 2: c1 c2 p1 p0 d1 d0 1 0 - * - * p3-p0: packet type - * c1, c2: c1 & c2 == 1, if p2 == 0 - * c1 & c2 == 0, if p2 == 1 - * - * packet type: 0 (device type) - * See comments in enable_mmanplus() below. - * - * packet type: 1 (wheel data) - * - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 3: h * B5 B4 s d2 d1 d0 - * - * h: 1, if horizontal roller data - * 0, if vertical roller data - * B4, B5: button 4 and 5 - * s: sign bit - * d2-d0: roller data - * - * packet type: 2 (reserved) - */ - if (((c & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) - && (abs(x) > 191) - && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) { - /* the extended data packet encodes button and wheel events */ + if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) && + (abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) { + /* + * the extended data packet encodes button + * and wheel events + */ switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) { case 1: - /* wheel data packet */ - x = y = 0; - if (pb->ipacket[2] & 0x80) { - /* horizontal roller count - ignore it XXX*/ - } else { - /* vertical roller count */ - z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) - ? (pb->ipacket[2] & 0x0f) - 16 - : (pb->ipacket[2] & 0x0f); - } - ms.button |= (pb->ipacket[2] & MOUSE_PS2PLUS_BUTTON4DOWN) - ? MOUSE_BUTTON4DOWN : 0; - ms.button |= (pb->ipacket[2] & MOUSE_PS2PLUS_BUTTON5DOWN) - ? MOUSE_BUTTON5DOWN : 0; - break; + /* wheel data packet */ + *x = *y = 0; + if (pb->ipacket[2] & 0x80) { + /* XXX horizontal roller count - ignore it */ + ; + } else { + /* vertical roller count */ + *z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ? + (pb->ipacket[2] & 0x0f) - 16 : + (pb->ipacket[2] & 0x0f); + } + ms->button |= (pb->ipacket[2] & + MOUSE_PS2PLUS_BUTTON4DOWN) ? + MOUSE_BUTTON4DOWN : 0; + ms->button |= (pb->ipacket[2] & + MOUSE_PS2PLUS_BUTTON5DOWN) ? + MOUSE_BUTTON5DOWN : 0; + break; case 2: - /* this packet type is reserved by Logitech... */ - /* - * IBM ScrollPoint Mouse uses this packet type to - * encode both vertical and horizontal scroll movement. - */ - x = y = 0; - /* horizontal count */ - if (pb->ipacket[2] & 0x0f) - z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ? -2 : 2; - /* vertical count */ - if (pb->ipacket[2] & 0xf0) - z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1; -#if 0 - /* vertical count */ - z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) - ? ((pb->ipacket[2] >> 4) & 0x0f) - 16 - : ((pb->ipacket[2] >> 4) & 0x0f); - /* horizontal count */ - w = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) - ? (pb->ipacket[2] & 0x0f) - 16 - : (pb->ipacket[2] & 0x0f); -#endif - break; + /* + * this packet type is reserved by + * Logitech... + */ + /* + * IBM ScrollPoint Mouse uses this + * packet type to encode both vertical + * and horizontal scroll movement. + */ + *x = *y = 0; + /* horizontal count */ + if (pb->ipacket[2] & 0x0f) + *z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ? + -2 : 2; + /* vertical count */ + if (pb->ipacket[2] & 0xf0) + *z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ? + -1 : 1; + break; case 0: - /* device type packet - shouldn't happen */ - /* FALLTHROUGH */ + /* device type packet - shouldn't happen */ + /* FALLTHROUGH */ default: - x = y = 0; - ms.button = ms.obutton; - VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet type %d:" - " 0x%02x 0x%02x 0x%02x\n", - MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket), - pb->ipacket[0], pb->ipacket[1], pb->ipacket[2])); - break; + *x = *y = 0; + ms->button = ms->obutton; + VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet " + "type %d: 0x%02x 0x%02x 0x%02x\n", + MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket), + pb->ipacket[0], pb->ipacket[1], pb->ipacket[2])); + break; } - } else { + } else { /* preserve button states */ - ms.button |= ms.obutton & MOUSE_EXTBUTTONS; - } - break; + ms->button |= ms->obutton & MOUSE_EXTBUTTONS; + } +} - case MOUSE_MODEL_GLIDEPOINT: - /* `tapping' action */ - ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN; - break; +static int +proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, + int *x, int *y, int *z) +{ + static int touchpad_buttons; + static int guest_buttons; + int w, x0, y0, xavg, yavg, xsensitivity, ysensitivity, sensitivity = 0; - case MOUSE_MODEL_NETSCROLL: - /* three addtional bytes encode buttons and wheel events */ - ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) - ? MOUSE_BUTTON4DOWN : 0; - ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) - ? MOUSE_BUTTON5DOWN : 0; - z = (pb->ipacket[3] & MOUSE_PS2_XNEG) - ? pb->ipacket[4] - 256 : pb->ipacket[4]; - break; + /* TouchPad PS/2 absolute mode message format + * + * Bits: 7 6 5 4 3 2 1 0 (LSB) + * ------------------------------------------------ + * ipacket[0]: 1 0 W3 W2 0 W1 R L + * ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8 + * ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 + * ipacket[3]: 1 1 Yc Xc 0 W0 D U + * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0 + * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + * + * Legend: + * L: left physical mouse button + * R: right physical mouse button + * D: down button + * U: up button + * W: "wrist" value + * X: x position + * Y: x position + * Z: pressure + * + * Absolute reportable limits: 0 - 6143. + * Typical bezel limits: 1472 - 5472. + * Typical edge marings: 1632 - 5312. + * + * w = 3 Passthrough Packet + * + * Byte 2,5,6 == Byte 1,2,3 of "Guest" + */ - case MOUSE_MODEL_THINK: - /* the fourth button state in the first byte */ - ms.button |= (c & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0; - break; + if (!synaptics_support) + return (0); - case MOUSE_MODEL_VERSAPAD: - /* VersaPad PS/2 absolute mode message format - * - * [packet1] 7 6 5 4 3 2 1 0(LSB) - * ipacket[0]: 1 1 0 A 1 L T R - * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0 - * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0 - * ipacket[3]: 1 1 1 A 1 L T R - * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8 - * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0 - * - * [note] - * R: right physical mouse button (1=on) - * T: touch pad virtual button (1=tapping) - * L: left physical mouse button (1=on) - * A: position data is valid (1=valid) - * H: horizontal data (12bit signed integer. H11 is sign bit.) - * V: vertical data (12bit signed integer. V11 is sign bit.) - * P: pressure data - * - * Tapping is mapped to MOUSE_BUTTON4. - */ - ms.button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS]; - ms.button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0; - x = y = 0; - if (c & MOUSE_PS2VERSA_IN_USE) { - x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8); - y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4); - if (x0 & 0x800) - x0 -= 0x1000; - if (y0 & 0x800) - y0 -= 0x1000; - if (sc->flags & PSM_FLAGS_FINGERDOWN) { - x = sc->xold - x0; - y = y0 - sc->yold; - if (x < 0) /* XXX */ - x++; - else if (x) - x--; - if (y < 0) - y++; - else if (y) - y--; - } else { - sc->flags |= PSM_FLAGS_FINGERDOWN; - } - sc->xold = x0; - sc->yold = y0; - } else { - sc->flags &= ~PSM_FLAGS_FINGERDOWN; - } - c = ((x < 0) ? MOUSE_PS2_XNEG : 0) - | ((y < 0) ? MOUSE_PS2_YNEG : 0); - break; + /* Sanity check for out of sync packets. */ + if ((pb->ipacket[0] & 0xc8) != 0x80 || + (pb->ipacket[3] & 0xc8) != 0xc0) + return (-1); - case MOUSE_MODEL_4D: - /* - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 1: s2 d2 s1 d1 1 M R L - * byte 2: sx x x x x x x x - * byte 3: sy y y y y y y y - * - * s1: wheel 1 direction - * d1: wheel 1 data - * s2: wheel 2 direction - * d2: wheel 2 data - */ - x = (pb->ipacket[1] & 0x80) ? pb->ipacket[1] - 256 : pb->ipacket[1]; - y = (pb->ipacket[2] & 0x80) ? pb->ipacket[2] - 256 : pb->ipacket[2]; - switch (c & MOUSE_4D_WHEELBITS) { - case 0x10: - z = 1; - break; - case 0x30: - z = -1; - break; - case 0x40: /* 2nd wheel turning right XXX */ - z = 2; - break; - case 0xc0: /* 2nd wheel turning left XXX */ - z = -2; - break; - } - break; + *x = *y = x0 = y0 = 0; - case MOUSE_MODEL_4DPLUS: - if ((x < 16 - 256) && (y < 16 - 256)) { - /* - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 1: 0 0 1 1 1 M R L - * byte 2: 0 0 0 0 1 0 0 0 - * byte 3: 0 0 0 0 S s d1 d0 - * - * L, M, R, S: left, middle, right and side buttons - * s: wheel data sign bit - * d1-d0: wheel data - */ - x = y = 0; - if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN) - ms.button |= MOUSE_BUTTON4DOWN; - z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) - ? ((pb->ipacket[2] & 0x07) - 8) - : (pb->ipacket[2] & 0x07) ; - } else { - /* preserve previous button states */ - ms.button |= ms.obutton & MOUSE_EXTBUTTONS; - } - break; + /* Pressure value. */ + *z = pb->ipacket[2]; - case MOUSE_MODEL_SYNAPTICS: - /* TouchPad PS/2 absolute mode message format - * - * Bits: 7 6 5 4 3 2 1 0 (LSB) - * ------------------------------------------------ - * ipacket[0]: 1 0 W3 W2 0 W1 R L - * ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8 - * ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 - * ipacket[3]: 1 1 Yc Xc 0 W0 D U - * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0 - * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * - * Legend: - * L: left physical mouse button - * R: right physical mouse button - * D: down button - * U: up button - * W: "wrist" value - * X: x position - * Y: x position - * Z: pressure - * - * Absolute reportable limits: 0 - 6143. - * Typical bezel limits: 1472 - 5472. - * Typical edge marings: 1632 - 5312. - * - * w = 3 Passthrough Packet - * - * Byte 2,5,6 == Byte 1,2,3 of "Guest" - */ - - if (!synaptics_support) - break; - - /* Sanity check for out of sync packets. */ - if ((pb->ipacket[0] & 0xc8) != 0x80 || - (pb->ipacket[3] & 0xc8) != 0xc0) - goto NEXT; - - x = y = x0 = y0 = 0; - - /* Pressure value. */ - z = pb->ipacket[2]; - - /* Finger width value */ - if (sc->synhw.capExtended) { + /* Finger width value */ + if (sc->synhw.capExtended) w = ((pb->ipacket[0] & 0x30) >> 2) | ((pb->ipacket[0] & 0x04) >> 1) | ((pb->ipacket[3] & 0x04) >> 2); - } else { + else { /* Assume a finger of regular width */ w = 4; - } + } - /* Handle packets from the guest device */ - if (w == 3 && sc->synhw.capPassthrough) { - x = ((pb->ipacket[1] & 0x10) ? + /* Handle packets from the guest device */ + if (w == 3 && sc->synhw.capPassthrough) { + *x = ((pb->ipacket[1] & 0x10) ? pb->ipacket[4] - 256 : pb->ipacket[4]); - y = ((pb->ipacket[1] & 0x20) ? + *y = ((pb->ipacket[1] & 0x20) ? pb->ipacket[5] - 256 : pb->ipacket[5]); - z = 0; + *z = 0; guest_buttons = 0; if (pb->ipacket[1] & 0x01) - guest_buttons |= MOUSE_BUTTON1DOWN; + guest_buttons |= MOUSE_BUTTON1DOWN; if (pb->ipacket[1] & 0x04) - guest_buttons |= MOUSE_BUTTON2DOWN; + guest_buttons |= MOUSE_BUTTON2DOWN; if (pb->ipacket[1] & 0x02) - guest_buttons |= MOUSE_BUTTON3DOWN; + guest_buttons |= MOUSE_BUTTON3DOWN; - ms.button = touchpad_buttons | guest_buttons; - break; - } + ms->button = touchpad_buttons | guest_buttons; + return (0); + } - /* Button presses */ - touchpad_buttons = 0; - if (pb->ipacket[0] & 0x01) - touchpad_buttons |= MOUSE_BUTTON1DOWN; - if (pb->ipacket[0] & 0x02) - touchpad_buttons |= MOUSE_BUTTON3DOWN; + /* Button presses */ + touchpad_buttons = 0; + if (pb->ipacket[0] & 0x01) + touchpad_buttons |= MOUSE_BUTTON1DOWN; + if (pb->ipacket[0] & 0x02) + touchpad_buttons |= MOUSE_BUTTON3DOWN; - if (sc->synhw.capExtended && sc->synhw.capFourButtons) { + if (sc->synhw.capExtended && sc->synhw.capFourButtons) { if ((pb->ipacket[3] & 0x01) && (pb->ipacket[0] & 0x01) == 0) - touchpad_buttons |= MOUSE_BUTTON4DOWN; - if ((pb->ipacket[3] & 0x02) && (pb->ipacket[0] & 0x02) == 0) - touchpad_buttons |= MOUSE_BUTTON5DOWN; - } - - /* - * In newer pads - bit 0x02 in the third byte of - * the packet indicates that we have an extended - * button press. - */ - if (pb->ipacket[3] & 0x02) { - /* - * if directional_scrolls is not 1, we treat - * any of the scrolling directions as middle-click. - */ - if (sc->syninfo.directional_scrolls) { - if (pb->ipacket[4] & 0x01) touchpad_buttons |= MOUSE_BUTTON4DOWN; - if (pb->ipacket[5] & 0x01) + if ((pb->ipacket[3] & 0x02) && (pb->ipacket[0] & 0x02) == 0) touchpad_buttons |= MOUSE_BUTTON5DOWN; - if (pb->ipacket[4] & 0x02) - touchpad_buttons |= MOUSE_BUTTON6DOWN; - if (pb->ipacket[5] & 0x02) - touchpad_buttons |= MOUSE_BUTTON7DOWN; + } + + /* + * In newer pads - bit 0x02 in the third byte of + * the packet indicates that we have an extended + * button press. + */ + if (pb->ipacket[3] & 0x02) { + /* + * if directional_scrolls is not 1, we treat any of + * the scrolling directions as middle-click. + */ + if (sc->syninfo.directional_scrolls) { + if (pb->ipacket[4] & 0x01) + touchpad_buttons |= MOUSE_BUTTON4DOWN; + if (pb->ipacket[5] & 0x01) + touchpad_buttons |= MOUSE_BUTTON5DOWN; + if (pb->ipacket[4] & 0x02) + touchpad_buttons |= MOUSE_BUTTON6DOWN; + if (pb->ipacket[5] & 0x02) + touchpad_buttons |= MOUSE_BUTTON7DOWN; } else { - if ((pb->ipacket[4] & 0x0F) || (pb->ipacket[5] & 0x0F)) - touchpad_buttons |= MOUSE_BUTTON2DOWN; + if ((pb->ipacket[4] & 0x0F) || (pb->ipacket[5] & 0x0F)) + touchpad_buttons |= MOUSE_BUTTON2DOWN; } + } - } + ms->button = touchpad_buttons | guest_buttons; - ms.button = touchpad_buttons | guest_buttons; - - /* There is a finger on the pad. */ - if ((w >= 4 && w <= 7) && (z >= 16 && z < 200)) { + /* There is a finger on the pad. */ + if ((w >= 4 && w <= 7) && (*z >= 16 && *z < 200)) { x0 = ((pb->ipacket[3] & 0x10) << 8) | - ((pb->ipacket[1] & 0x0f) << 8) | - pb->ipacket[4]; + ((pb->ipacket[1] & 0x0f) << 8) | pb->ipacket[4]; y0 = ((pb->ipacket[3] & 0x20) << 7) | - ((pb->ipacket[1] & 0xf0) << 4) | - pb->ipacket[5]; + ((pb->ipacket[1] & 0xf0) << 4) | pb->ipacket[5]; if (sc->flags & PSM_FLAGS_FINGERDOWN) { - x = x0 - sc->xold; - y = y0 - sc->yold; + *x = x0 - sc->xold; + *y = y0 - sc->yold; - /* we compute averages of x and y movement */ - if (sc->xaverage == 0) - sc->xaverage=x; - - if (sc->yaverage == 0) - sc->yaverage=y; - - xavg = sc->xaverage; - yavg = sc->yaverage; - - sc->xaverage = (xavg + x) >> 1; - sc->yaverage = (yavg + y) >> 1; - - /* - * then use the averages to compute a sensitivity level - * in each dimension - */ - xsensitivity = (sc->xaverage - xavg); - if (xsensitivity < 0) - xsensitivity = -xsensitivity; - - ysensitivity = (sc->yaverage - yavg); - if (ysensitivity < 0) - ysensitivity = -ysensitivity; - - /* - * The sensitivity level is higher the faster the finger - * is moving. It also tends to be higher in the middle - * of a touchpad motion than on either end - * - * Note - sensitivity gets to 0 when moving slowly - so - * we add 1 to it to give it a meaningful value in that case. - */ - sensitivity = (xsensitivity & ysensitivity)+1; - - /* - * If either our x or y change is greater than our - * hi/low speed threshold - we do the high-speed - * absolute to relative calculation otherwise we - * do the low-speed calculation. - */ - if ((x>sc->syninfo.low_speed_threshold || - x<-sc->syninfo.low_speed_threshold) || - (y>sc->syninfo.low_speed_threshold || - y<-sc->syninfo.low_speed_threshold)) { - x0 = (x0 + sc->xold * 3) / 4; - y0 = (y0 + sc->yold * 3) / 4; - x = (x0 - sc->xold) * 10 / 85; - y = (y0 - sc->yold) * 10 / 85; - } else { - /* - * This is the low speed calculation. - * We simply check to see if our movement - * is more than our minimum movement threshold - * and if it is - set the movement to 1 in the - * correct direction. - * NOTE - Normally this would result in pointer - * movement that was WAY too fast. This works - * due to the movement squelch we do later. + /* + * we compute averages of x and y + * movement */ - if (x < -sc->syninfo.min_movement) - x = -1; - else if (x > sc->syninfo.min_movement) - x = 1; - else - x = 0; - if (y < -sc->syninfo.min_movement) - y = -1; - else if (y > sc->syninfo.min_movement) - y = 1; - else - y = 0; + if (sc->xaverage == 0) + sc->xaverage = *x; - } - } else { - sc->flags |= PSM_FLAGS_FINGERDOWN; - } + if (sc->yaverage == 0) + sc->yaverage = *y; - /* - * ok - the squelch process. Take our sensitivity value - * and add it to the current squelch value - if squelch - * is less than our squelch threshold we kill the movement, + xavg = sc->xaverage; + yavg = sc->yaverage; + + sc->xaverage = (xavg + *x) >> 1; + sc->yaverage = (yavg + *y) >> 1; + + /* + * then use the averages to compute + * a sensitivity level in each dimension + */ + xsensitivity = (sc->xaverage - xavg); + if (xsensitivity < 0) + xsensitivity = -xsensitivity; + + ysensitivity = (sc->yaverage - yavg); + if (ysensitivity < 0) + ysensitivity = -ysensitivity; + + /* + * The sensitivity level is higher the faster + * the finger is moving. It also tends to be + * higher in the middle of a touchpad motion + * than on either end + * Note - sensitivity gets to 0 when moving slowly - + * so we add 1 to it to give it a meaningful value + * in that case. + */ + sensitivity = (xsensitivity & ysensitivity) + 1; + + /* + * If either our x or y change is greater than + * our hi/low speed threshold - we do the high-speed + * absolute to relative calculation otherwise + * we do the low-speed calculation. + */ + if ((*x > sc->syninfo.low_speed_threshold || + *x < -sc->syninfo.low_speed_threshold) || + (*y > sc->syninfo.low_speed_threshold || + *y < -sc->syninfo.low_speed_threshold)) { + x0 = (x0 + sc->xold * 3) / 4; + y0 = (y0 + sc->yold * 3) / 4; + *x = (x0 - sc->xold) * 10 / 85; + *y = (y0 - sc->yold) * 10 / 85; + } else { + /* + * This is the low speed calculation. + * We simply check to see if our movement is + * more than our minimum movement threshold + * and if it is - set the movement to 1 + * in the correct direction. + * NOTE - Normally this would result + * in pointer movement that was WAY too fast. + * This works due to the movement squelch + * we do later. + */ + if (*x < -sc->syninfo.min_movement) + *x = -1; + else if (*x > sc->syninfo.min_movement) + *x = 1; + else + *x = 0; + if (*y < -sc->syninfo.min_movement) + *y = -1; + else if (*y > sc->syninfo.min_movement) + *y = 1; + else + *y = 0; + + } + } else + sc->flags |= PSM_FLAGS_FINGERDOWN; + + /* + * The squelch process. Take our sensitivity value and + * add it to the current squelch value - if squelch is + * less than our squelch threshold we kill the movement, * otherwise we reset squelch and pass the movement through. * Since squelch is cumulative - when mouse movement is slow - * (around sensitivity 1) the net result is that only - * 1 out of every squelch_level packets is - * delivered, effectively slowing down the movement. + * (around sensitivity 1) the net result is that only 1 + * out of every squelch_level packets is delivered, + * effectively slowing down the movement. */ sc->squelch += sensitivity; if (sc->squelch < sc->syninfo.squelch_level) { - x = 0; - y = 0; + *x = 0; + *y = 0; } else - sc->squelch = 0; + sc->squelch = 0; sc->xold = x0; sc->yold = y0; - sc->zmax = imax(z, sc->zmax); - } else { + sc->zmax = imax(*z, sc->zmax); + } else { sc->flags &= ~PSM_FLAGS_FINGERDOWN; if (sc->zmax > tap_threshold && timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=)) { if (w == 0) - ms.button |= MOUSE_BUTTON3DOWN; + ms->button |= MOUSE_BUTTON3DOWN; else if (w == 1) - ms.button |= MOUSE_BUTTON2DOWN; + ms->button |= MOUSE_BUTTON2DOWN; else - ms.button |= MOUSE_BUTTON1DOWN; + ms->button |= MOUSE_BUTTON1DOWN; } sc->zmax = 0; sc->taptimeout.tv_sec = tap_timeout / 1000000; sc->taptimeout.tv_usec = tap_timeout % 1000000; timevaladd(&sc->taptimeout, &sc->lastsoftintr); - } - - /* Use the extra buttons as a scrollwheel */ - if (ms.button & MOUSE_BUTTON4DOWN) - z = -1; - else if (ms.button & MOUSE_BUTTON5DOWN) - z = 1; - else - z = 0; - - break; - - case MOUSE_MODEL_GENERIC: - default: - break; } - /* scale values */ - if (sc->mode.accelfactor >= 1) { - if (x != 0) { - x = x * x / sc->mode.accelfactor; - if (x == 0) - x = 1; - if (c & MOUSE_PS2_XNEG) - x = -x; - } - if (y != 0) { - y = y * y / sc->mode.accelfactor; - if (y == 0) - y = 1; - if (c & MOUSE_PS2_YNEG) - y = -y; - } - } + /* Use the extra buttons as a scrollwheel */ + if (ms->button & MOUSE_BUTTON4DOWN) + *z = -1; + else if (ms->button & MOUSE_BUTTON5DOWN) + *z = 1; + else + *z = 0; - ms.dx = x; - ms.dy = y; - ms.dz = z; - ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) - | (ms.obutton ^ ms.button); + return (0); +} + +static void +proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms, + int *x, int *y, int *z) +{ + static int butmap_versapad[8] = { + 0, + MOUSE_BUTTON3DOWN, + 0, + MOUSE_BUTTON3DOWN, + MOUSE_BUTTON1DOWN, + MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, + MOUSE_BUTTON1DOWN, + MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN + }; + int c, x0, y0; + + /* VersaPad PS/2 absolute mode message format + * + * [packet1] 7 6 5 4 3 2 1 0(LSB) + * ipacket[0]: 1 1 0 A 1 L T R + * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0 + * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0 + * ipacket[3]: 1 1 1 A 1 L T R + * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8 + * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0 + * + * [note] + * R: right physical mouse button (1=on) + * T: touch pad virtual button (1=tapping) + * L: left physical mouse button (1=on) + * A: position data is valid (1=valid) + * H: horizontal data (12bit signed integer. H11 is sign bit.) + * V: vertical data (12bit signed integer. V11 is sign bit.) + * P: pressure data + * + * Tapping is mapped to MOUSE_BUTTON4. + */ + c = pb->ipacket[0]; + *x = *y = 0; + ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS]; + ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0; + if (c & MOUSE_PS2VERSA_IN_USE) { + x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8); + y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4); + if (x0 & 0x800) + x0 -= 0x1000; + if (y0 & 0x800) + y0 -= 0x1000; + if (sc->flags & PSM_FLAGS_FINGERDOWN) { + *x = sc->xold - x0; + *y = y0 - sc->yold; + if (*x < 0) /* XXX */ + ++*x; + else if (*x) + --*x; + if (*y < 0) + ++*y; + else if (*y) + --*y; + } else + sc->flags |= PSM_FLAGS_FINGERDOWN; + sc->xold = x0; + sc->yold = y0; + } else + sc->flags &= ~PSM_FLAGS_FINGERDOWN; +} + +static void +psmsoftintr(void *arg) +{ + /* + * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN) + * into `mousestatus' button bits (MOUSE_BUTTON?DOWN). + */ + static int butmap[8] = { + 0, + MOUSE_BUTTON1DOWN, + MOUSE_BUTTON3DOWN, + MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, + MOUSE_BUTTON2DOWN, + MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, + MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, + MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN + }; + register struct psm_softc *sc = arg; + mousestatus_t ms; + packetbuf_t *pb; + int x, y, z, c, l, s; + + getmicrouptime(&sc->lastsoftintr); + + s = spltty(); + + do { + pb = &sc->pqueue[sc->pqueue_start]; + + if (sc->mode.level == PSM_LEVEL_NATIVE) + goto next_native; + + c = pb->ipacket[0]; + /* + * A kludge for Kensington device! + * The MSB of the horizontal count appears to be stored in + * a strange place. + */ + if (sc->hw.model == MOUSE_MODEL_THINK) + pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0; + + /* ignore the overflow bits... */ + x = (c & MOUSE_PS2_XNEG) ? + pb->ipacket[1] - 256 : pb->ipacket[1]; + y = (c & MOUSE_PS2_YNEG) ? + pb->ipacket[2] - 256 : pb->ipacket[2]; + z = 0; + ms.obutton = sc->button; /* previous button state */ + ms.button = butmap[c & MOUSE_PS2_BUTTONS]; + /* `tapping' action */ + if (sc->config & PSM_CONFIG_FORCETAP) + ms.button |= ((c & MOUSE_PS2_TAP)) ? + 0 : MOUSE_BUTTON4DOWN; + + switch (sc->hw.model) { + + case MOUSE_MODEL_EXPLORER: + /* + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 1: oy ox sy sx 1 M R L + * byte 2: x x x x x x x x + * byte 3: y y y y y y y y + * byte 4: * * S2 S1 s d2 d1 d0 + * + * L, M, R, S1, S2: left, middle, right and side buttons + * s: wheel data sign bit + * d2-d0: wheel data + */ + z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ? + (pb->ipacket[3] & 0x0f) - 16 : + (pb->ipacket[3] & 0x0f); + ms.button |= + (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ? + MOUSE_BUTTON4DOWN : 0; + ms.button |= + (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ? + MOUSE_BUTTON5DOWN : 0; + break; + + case MOUSE_MODEL_INTELLI: + case MOUSE_MODEL_NET: + /* wheel data is in the fourth byte */ + z = (char)pb->ipacket[3]; + /* + * XXX some mice may send 7 when there is no Z movement? */ + if ((z >= 7) || (z <= -7)) + z = 0; + /* some compatible mice have additional buttons */ + ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ? + MOUSE_BUTTON4DOWN : 0; + ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ? + MOUSE_BUTTON5DOWN : 0; + break; + + case MOUSE_MODEL_MOUSEMANPLUS: + proc_mmanplus(sc, pb, &ms, &x, &y, &z); + break; + + case MOUSE_MODEL_GLIDEPOINT: + /* `tapping' action */ + ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : + MOUSE_BUTTON4DOWN; + break; + + case MOUSE_MODEL_NETSCROLL: + /* + * three addtional bytes encode buttons and + * wheel events + */ + ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ? + MOUSE_BUTTON4DOWN : 0; + ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ? + MOUSE_BUTTON5DOWN : 0; + z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ? + pb->ipacket[4] - 256 : pb->ipacket[4]; + break; + + case MOUSE_MODEL_THINK: + /* the fourth button state in the first byte */ + ms.button |= (c & MOUSE_PS2_TAP) ? + MOUSE_BUTTON4DOWN : 0; + break; + + case MOUSE_MODEL_VERSAPAD: + proc_versapad(sc, pb, &ms, &x, &y, &z); + c = ((x < 0) ? MOUSE_PS2_XNEG : 0) | + ((y < 0) ? MOUSE_PS2_YNEG : 0); + break; + + case MOUSE_MODEL_4D: + /* + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 1: s2 d2 s1 d1 1 M R L + * byte 2: sx x x x x x x x + * byte 3: sy y y y y y y y + * + * s1: wheel 1 direction + * d1: wheel 1 data + * s2: wheel 2 direction + * d2: wheel 2 data + */ + x = (pb->ipacket[1] & 0x80) ? + pb->ipacket[1] - 256 : pb->ipacket[1]; + y = (pb->ipacket[2] & 0x80) ? + pb->ipacket[2] - 256 : pb->ipacket[2]; + switch (c & MOUSE_4D_WHEELBITS) { + case 0x10: + z = 1; + break; + case 0x30: + z = -1; + break; + case 0x40: /* XXX 2nd wheel turning right */ + z = 2; + break; + case 0xc0: /* XXX 2nd wheel turning left */ + z = -2; + break; + } + break; + + case MOUSE_MODEL_4DPLUS: + if ((x < 16 - 256) && (y < 16 - 256)) { + /* + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 1: 0 0 1 1 1 M R L + * byte 2: 0 0 0 0 1 0 0 0 + * byte 3: 0 0 0 0 S s d1 d0 + * + * L, M, R, S: left, middle, right, + * and side buttons + * s: wheel data sign bit + * d1-d0: wheel data + */ + x = y = 0; + if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN) + ms.button |= MOUSE_BUTTON4DOWN; + z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ? + ((pb->ipacket[2] & 0x07) - 8) : + (pb->ipacket[2] & 0x07) ; + } else { + /* preserve previous button states */ + ms.button |= ms.obutton & MOUSE_EXTBUTTONS; + } + break; + + case MOUSE_MODEL_SYNAPTICS: + if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0) + goto next; + break; + + case MOUSE_MODEL_GENERIC: + default: + break; + } + + /* scale values */ + if (sc->mode.accelfactor >= 1) { + if (x != 0) { + x = x * x / sc->mode.accelfactor; + if (x == 0) + x = 1; + if (c & MOUSE_PS2_XNEG) + x = -x; + } + if (y != 0) { + y = y * y / sc->mode.accelfactor; + if (y == 0) + y = 1; + if (c & MOUSE_PS2_YNEG) + y = -y; + } + } + + ms.dx = x; + ms.dy = y; + ms.dz = z; + ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) | + (ms.obutton ^ ms.button); pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket); - sc->status.flags |= ms.flags; - sc->status.dx += ms.dx; - sc->status.dy += ms.dy; - sc->status.dz += ms.dz; - sc->status.button = ms.button; - sc->button = ms.button; + sc->status.flags |= ms.flags; + sc->status.dx += ms.dx; + sc->status.dy += ms.dy; + sc->status.dz += ms.dz; + sc->status.button = ms.button; + sc->button = ms.button; -NEXT_NATIVE: +next_native: sc->watchdog = FALSE; - /* queue data */ - if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) { - l = imin(pb->inputbytes, sizeof(sc->queue.buf) - sc->queue.tail); - bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l); - if (pb->inputbytes > l) - bcopy(&pb->ipacket[l], &sc->queue.buf[0], pb->inputbytes - l); - sc->queue.tail = - (sc->queue.tail + pb->inputbytes) % sizeof(sc->queue.buf); - sc->queue.count += pb->inputbytes; + /* queue data */ + if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) { + l = imin(pb->inputbytes, + sizeof(sc->queue.buf) - sc->queue.tail); + bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l); + if (pb->inputbytes > l) + bcopy(&pb->ipacket[l], &sc->queue.buf[0], + pb->inputbytes - l); + sc->queue.tail = (sc->queue.tail + pb->inputbytes) % + sizeof(sc->queue.buf); + sc->queue.count += pb->inputbytes; } - pb->inputbytes = 0; + pb->inputbytes = 0; -NEXT: +next: if (++sc->pqueue_start >= PSM_PACKETQUEUE) sc->pqueue_start = 0; - } while (sc->pqueue_start != sc->pqueue_end); - if (sc->state & PSM_ASLP) { - sc->state &= ~PSM_ASLP; - wakeup( sc); - } - selwakeuppri(&sc->rsel, PZERO); - sc->state &= ~PSM_SOFTARMED; - splx(s); + } while (sc->pqueue_start != sc->pqueue_end); + + if (sc->state & PSM_ASLP) { + sc->state &= ~PSM_ASLP; + wakeup(sc); + } + selwakeuppri(&sc->rsel, PZERO); + sc->state &= ~PSM_SOFTARMED; + splx(s); } static int psmpoll(struct cdev *dev, int events, struct thread *td) { - struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); - int s; - int revents = 0; + struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev)); + int s; + int revents = 0; - /* Return true if a mouse event available */ - s = spltty(); - if (events & (POLLIN | POLLRDNORM)) { - if (sc->queue.count > 0) - revents |= events & (POLLIN | POLLRDNORM); - else - selrecord(td, &sc->rsel); - } - splx(s); + /* Return true if a mouse event available */ + s = spltty(); + if (events & (POLLIN | POLLRDNORM)) { + if (sc->queue.count > 0) + revents |= events & (POLLIN | POLLRDNORM); + else + selrecord(td, &sc->rsel); + } + splx(s); - return (revents); + return (revents); } /* vendor/model specific routines */ static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status) { - if (set_mouse_resolution(kbdc, res) != res) - return FALSE; - if (set_mouse_scaling(kbdc, scale) - && set_mouse_scaling(kbdc, scale) - && set_mouse_scaling(kbdc, scale) - && (get_mouse_status(kbdc, status, 0, 3) >= 3)) - return TRUE; - return FALSE; + if (set_mouse_resolution(kbdc, res) != res) + return (FALSE); + if (set_mouse_scaling(kbdc, scale) && + set_mouse_scaling(kbdc, scale) && + set_mouse_scaling(kbdc, scale) && + (get_mouse_status(kbdc, status, 0, 3) >= 3)) + return (TRUE); + return (FALSE); } -static int +static int mouse_ext_command(KBDC kbdc, int command) { - int c; + int c; - c = (command >> 6) & 0x03; - if (set_mouse_resolution(kbdc, c) != c) - return FALSE; - c = (command >> 4) & 0x03; - if (set_mouse_resolution(kbdc, c) != c) - return FALSE; - c = (command >> 2) & 0x03; - if (set_mouse_resolution(kbdc, c) != c) - return FALSE; - c = (command >> 0) & 0x03; - if (set_mouse_resolution(kbdc, c) != c) - return FALSE; - return TRUE; + c = (command >> 6) & 0x03; + if (set_mouse_resolution(kbdc, c) != c) + return (FALSE); + c = (command >> 4) & 0x03; + if (set_mouse_resolution(kbdc, c) != c) + return (FALSE); + c = (command >> 2) & 0x03; + if (set_mouse_resolution(kbdc, c) != c) + return (FALSE); + c = (command >> 0) & 0x03; + if (set_mouse_resolution(kbdc, c) != c) + return (FALSE); + return (TRUE); } #ifdef notyet @@ -2948,21 +3035,21 @@ mouse_ext_command(KBDC kbdc, int command) static int enable_lcordless(struct psm_softc *sc) { - int status[3]; - int ch; + int status[3]; + int ch; - if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 2, status)) - return FALSE; - if (status[1] == PSMD_RES_HIGH) - return FALSE; - ch = (status[0] & 0x07) - 1; /* channel # */ - if ((ch <= 0) || (ch > 4)) - return FALSE; - /* - * status[1]: always one? - * status[2]: battery status? (0-100) - */ - return TRUE; + if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 2, status)) + return (FALSE); + if (status[1] == PSMD_RES_HIGH) + return (FALSE); + ch = (status[0] & 0x07) - 1; /* channel # */ + if ((ch <= 0) || (ch > 4)) + return (FALSE); + /* + * status[1]: always one? + * status[2]: battery status? (0-100) + */ + return (TRUE); } #endif /* notyet */ @@ -2970,573 +3057,573 @@ enable_lcordless(struct psm_softc *sc) static int enable_groller(struct psm_softc *sc) { - int status[3]; + int status[3]; - /* - * The special sequence to enable the fourth button and the - * roller. Immediately after this sequence check status bytes. - * if the mouse is NetScroll, the second and the third bytes are - * '3' and 'D'. - */ + /* + * The special sequence to enable the fourth button and the + * roller. Immediately after this sequence check status bytes. + * if the mouse is NetScroll, the second and the third bytes are + * '3' and 'D'. + */ - /* - * If the mouse is an ordinary PS/2 mouse, the status bytes should - * look like the following. - * - * byte 1 bit 7 always 0 - * bit 6 stream mode (0) - * bit 5 disabled (0) - * bit 4 1:1 scaling (0) - * bit 3 always 0 - * bit 0-2 button status - * byte 2 resolution (PSMD_RES_HIGH) - * byte 3 report rate (?) - */ + /* + * If the mouse is an ordinary PS/2 mouse, the status bytes should + * look like the following. + * + * byte 1 bit 7 always 0 + * bit 6 stream mode (0) + * bit 5 disabled (0) + * bit 4 1:1 scaling (0) + * bit 3 always 0 + * bit 0-2 button status + * byte 2 resolution (PSMD_RES_HIGH) + * byte 3 report rate (?) + */ - if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status)) - return FALSE; - if ((status[1] != '3') || (status[2] != 'D')) - return FALSE; - /* FIXME: SmartScroll Mouse has 5 buttons! XXX */ - sc->hw.buttons = 4; - return TRUE; + if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status)) + return (FALSE); + if ((status[1] != '3') || (status[2] != 'D')) + return (FALSE); + /* FIXME: SmartScroll Mouse has 5 buttons! XXX */ + sc->hw.buttons = 4; + return (TRUE); } /* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */ static int enable_gmouse(struct psm_softc *sc) { - int status[3]; + int status[3]; - /* - * The special sequence to enable the middle, "rubber" button. - * Immediately after this sequence check status bytes. - * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse, - * the second and the third bytes are '3' and 'U'. - * NOTE: NetMouse reports that it has three buttons although it has - * two buttons and a rubber button. NetMouse Pro and MIE Mouse - * say they have three buttons too and they do have a button on the - * side... - */ - if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status)) - return FALSE; - if ((status[1] != '3') || (status[2] != 'U')) - return FALSE; - return TRUE; + /* + * The special sequence to enable the middle, "rubber" button. + * Immediately after this sequence check status bytes. + * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse, + * the second and the third bytes are '3' and 'U'. + * NOTE: NetMouse reports that it has three buttons although it has + * two buttons and a rubber button. NetMouse Pro and MIE Mouse + * say they have three buttons too and they do have a button on the + * side... + */ + if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status)) + return (FALSE); + if ((status[1] != '3') || (status[2] != 'U')) + return (FALSE); + return (TRUE); } /* ALPS GlidePoint */ static int enable_aglide(struct psm_softc *sc) { - int status[3]; + int status[3]; - /* - * The special sequence to obtain ALPS GlidePoint specific - * information. Immediately after this sequence, status bytes will - * contain something interesting. - * NOTE: ALPS produces several models of GlidePoint. Some of those - * do not respond to this sequence, thus, cannot be detected this way. - */ - if (set_mouse_sampling_rate(sc->kbdc, 100) != 100) - return FALSE; - if (!mouse_id_proc1(sc->kbdc, PSMD_RES_LOW, 2, status)) - return FALSE; - if ((status[1] == PSMD_RES_LOW) || (status[2] == 100)) - return FALSE; - return TRUE; + /* + * The special sequence to obtain ALPS GlidePoint specific + * information. Immediately after this sequence, status bytes will + * contain something interesting. + * NOTE: ALPS produces several models of GlidePoint. Some of those + * do not respond to this sequence, thus, cannot be detected this way. + */ + if (set_mouse_sampling_rate(sc->kbdc, 100) != 100) + return (FALSE); + if (!mouse_id_proc1(sc->kbdc, PSMD_RES_LOW, 2, status)) + return (FALSE); + if ((status[1] == PSMD_RES_LOW) || (status[2] == 100)) + return (FALSE); + return (TRUE); } /* Kensington ThinkingMouse/Trackball */ static int enable_kmouse(struct psm_softc *sc) { - static unsigned char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 }; - KBDC kbdc = sc->kbdc; - int status[3]; - int id1; - int id2; - int i; + static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 }; + KBDC kbdc = sc->kbdc; + int status[3]; + int id1; + int id2; + int i; - id1 = get_aux_id(kbdc); - if (set_mouse_sampling_rate(kbdc, 10) != 10) - return FALSE; - /* - * The device is now in the native mode? It returns a different - * ID value... - */ - id2 = get_aux_id(kbdc); - if ((id1 == id2) || (id2 != 2)) - return FALSE; + id1 = get_aux_id(kbdc); + if (set_mouse_sampling_rate(kbdc, 10) != 10) + return (FALSE); + /* + * The device is now in the native mode? It returns a different + * ID value... + */ + id2 = get_aux_id(kbdc); + if ((id1 == id2) || (id2 != 2)) + return (FALSE); - if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) - return FALSE; + if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW) + return (FALSE); #if PSM_DEBUG >= 2 - /* at this point, resolution is LOW, sampling rate is 10/sec */ - if (get_mouse_status(kbdc, status, 0, 3) < 3) - return FALSE; + /* at this point, resolution is LOW, sampling rate is 10/sec */ + if (get_mouse_status(kbdc, status, 0, 3) < 3) + return (FALSE); #endif - /* - * The special sequence to enable the third and fourth buttons. - * Otherwise they behave like the first and second buttons. - */ - for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) - return FALSE; - } + /* + * The special sequence to enable the third and fourth buttons. + * Otherwise they behave like the first and second buttons. + */ + for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) + return (FALSE); - /* - * At this point, the device is using default resolution and - * sampling rate for the native mode. - */ - if (get_mouse_status(kbdc, status, 0, 3) < 3) - return FALSE; - if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1])) - return FALSE; + /* + * At this point, the device is using default resolution and + * sampling rate for the native mode. + */ + if (get_mouse_status(kbdc, status, 0, 3) < 3) + return (FALSE); + if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1])) + return (FALSE); - /* the device appears be enabled by this sequence, diable it for now */ - disable_aux_dev(kbdc); - empty_aux_buffer(kbdc, 5); + /* the device appears be enabled by this sequence, diable it for now */ + disable_aux_dev(kbdc); + empty_aux_buffer(kbdc, 5); - return TRUE; + return (TRUE); } /* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */ static int enable_mmanplus(struct psm_softc *sc) { - KBDC kbdc = sc->kbdc; - int data[3]; + KBDC kbdc = sc->kbdc; + int data[3]; - /* the special sequence to enable the fourth button and the roller. */ - /* - * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION - * must be called exactly three times since the last RESET command - * before this sequence. XXX - */ - if (!set_mouse_scaling(kbdc, 1)) - return FALSE; - if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb)) - return FALSE; - if (get_mouse_status(kbdc, data, 1, 3) < 3) - return FALSE; + /* the special sequence to enable the fourth button and the roller. */ + /* + * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION + * must be called exactly three times since the last RESET command + * before this sequence. XXX + */ + if (!set_mouse_scaling(kbdc, 1)) + return (FALSE); + if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb)) + return (FALSE); + if (get_mouse_status(kbdc, data, 1, 3) < 3) + return (FALSE); - /* - * PS2++ protocl, packet type 0 - * - * b7 b6 b5 b4 b3 b2 b1 b0 - * byte 1: * 1 p3 p2 1 * * * - * byte 2: 1 1 p1 p0 m1 m0 1 0 - * byte 3: m7 m6 m5 m4 m3 m2 m1 m0 - * - * p3-p0: packet type: 0 - * m7-m0: model ID: MouseMan+:0x50, FirstMouse+:0x51, ScrollPoint:0x58... - */ - /* check constant bits */ - if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC) - return FALSE; - if ((data[1] & 0xc3) != 0xc2) - return FALSE; - /* check d3-d0 in byte 2 */ - if (!MOUSE_PS2PLUS_CHECKBITS(data)) - return FALSE; - /* check p3-p0 */ - if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0) - return FALSE; + /* + * PS2++ protocl, packet type 0 + * + * b7 b6 b5 b4 b3 b2 b1 b0 + * byte 1: * 1 p3 p2 1 * * * + * byte 2: 1 1 p1 p0 m1 m0 1 0 + * byte 3: m7 m6 m5 m4 m3 m2 m1 m0 + * + * p3-p0: packet type: 0 + * m7-m0: model ID: MouseMan+:0x50, + * FirstMouse+:0x51, + * ScrollPoint:0x58... + */ + /* check constant bits */ + if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC) + return (FALSE); + if ((data[1] & 0xc3) != 0xc2) + return (FALSE); + /* check d3-d0 in byte 2 */ + if (!MOUSE_PS2PLUS_CHECKBITS(data)) + return (FALSE); + /* check p3-p0 */ + if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0) + return (FALSE); - sc->hw.hwid &= 0x00ff; - sc->hw.hwid |= data[2] << 8; /* save model ID */ + sc->hw.hwid &= 0x00ff; + sc->hw.hwid |= data[2] << 8; /* save model ID */ - /* - * MouseMan+ (or FirstMouse+) is now in its native mode, in which - * the wheel and the fourth button events are encoded in the - * special data packet. The mouse may be put in the IntelliMouse mode - * if it is initialized by the IntelliMouse's method. - */ - return TRUE; + /* + * MouseMan+ (or FirstMouse+) is now in its native mode, in which + * the wheel and the fourth button events are encoded in the + * special data packet. The mouse may be put in the IntelliMouse mode + * if it is initialized by the IntelliMouse's method. + */ + return (TRUE); } /* MS IntelliMouse Explorer */ static int enable_msexplorer(struct psm_softc *sc) { - static unsigned char rate0[] = { 200, 100, 80, }; - static unsigned char rate1[] = { 200, 200, 80, }; - KBDC kbdc = sc->kbdc; - int id; - int i; + static u_char rate0[] = { 200, 100, 80, }; + static u_char rate1[] = { 200, 200, 80, }; + KBDC kbdc = sc->kbdc; + int id; + int i; - /* - * This is needed for at least A4Tech X-7xx mice - they do not go - * straight to Explorer mode, but need to be set to Intelli mode - * first. - */ - enable_msintelli(sc); + /* + * This is needed for at least A4Tech X-7xx mice - they do not go + * straight to Explorer mode, but need to be set to Intelli mode + * first. + */ + enable_msintelli(sc); - /* the special sequence to enable the extra buttons and the roller. */ - for (i = 0; i < sizeof(rate1)/sizeof(rate1[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i]) - return FALSE; - } - /* the device will give the genuine ID only after the above sequence */ - id = get_aux_id(kbdc); - if (id != PSM_EXPLORER_ID) - return FALSE; + /* the special sequence to enable the extra buttons and the roller. */ + for (i = 0; i < sizeof(rate1)/sizeof(rate1[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i]) + return (FALSE); + /* the device will give the genuine ID only after the above sequence */ + id = get_aux_id(kbdc); + if (id != PSM_EXPLORER_ID) + return (FALSE); - sc->hw.hwid = id; - sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */ + sc->hw.hwid = id; + sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */ - /* - * XXX: this is a kludge to fool some KVM switch products - * which think they are clever enough to know the 4-byte IntelliMouse - * protocol, and assume any other protocols use 3-byte packets. - * They don't convey 4-byte data packets from the IntelliMouse Explorer - * correctly to the host computer because of this! - * The following sequence is actually IntelliMouse's "wake up" - * sequence; it will make the KVM think the mouse is IntelliMouse - * when it is in fact IntelliMouse Explorer. - */ - for (i = 0; i < sizeof(rate0)/sizeof(rate0[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i]) - break; - } - id = get_aux_id(kbdc); + /* + * XXX: this is a kludge to fool some KVM switch products + * which think they are clever enough to know the 4-byte IntelliMouse + * protocol, and assume any other protocols use 3-byte packets. + * They don't convey 4-byte data packets from the IntelliMouse Explorer + * correctly to the host computer because of this! + * The following sequence is actually IntelliMouse's "wake up" + * sequence; it will make the KVM think the mouse is IntelliMouse + * when it is in fact IntelliMouse Explorer. + */ + for (i = 0; i < sizeof(rate0)/sizeof(rate0[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i]) + break; + id = get_aux_id(kbdc); - return TRUE; + return (TRUE); } /* MS IntelliMouse */ static int enable_msintelli(struct psm_softc *sc) { - /* - * Logitech MouseMan+ and FirstMouse+ will also respond to this - * probe routine and act like IntelliMouse. - */ + /* + * Logitech MouseMan+ and FirstMouse+ will also respond to this + * probe routine and act like IntelliMouse. + */ - static unsigned char rate[] = { 200, 100, 80, }; - KBDC kbdc = sc->kbdc; - int id; - int i; + static u_char rate[] = { 200, 100, 80, }; + KBDC kbdc = sc->kbdc; + int id; + int i; - /* the special sequence to enable the third button and the roller. */ - for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) - return FALSE; - } - /* the device will give the genuine ID only after the above sequence */ - id = get_aux_id(kbdc); - if (id != PSM_INTELLI_ID) - return FALSE; + /* the special sequence to enable the third button and the roller. */ + for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) + return (FALSE); + /* the device will give the genuine ID only after the above sequence */ + id = get_aux_id(kbdc); + if (id != PSM_INTELLI_ID) + return (FALSE); - sc->hw.hwid = id; - sc->hw.buttons = 3; + sc->hw.hwid = id; + sc->hw.buttons = 3; - return TRUE; + return (TRUE); } /* A4 Tech 4D Mouse */ static int enable_4dmouse(struct psm_softc *sc) { - /* - * Newer wheel mice from A4 Tech may use the 4D+ protocol. - */ + /* + * Newer wheel mice from A4 Tech may use the 4D+ protocol. + */ - static unsigned char rate[] = { 200, 100, 80, 60, 40, 20 }; - KBDC kbdc = sc->kbdc; - int id; - int i; + static u_char rate[] = { 200, 100, 80, 60, 40, 20 }; + KBDC kbdc = sc->kbdc; + int id; + int i; - for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) - return FALSE; - } - id = get_aux_id(kbdc); - /* - * WinEasy 4D, 4 Way Scroll 4D: 6 - * Cable-Free 4D: 8 (4DPLUS) - * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS) - */ - if (id != PSM_4DMOUSE_ID) - return FALSE; + for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) + return (FALSE); + id = get_aux_id(kbdc); + /* + * WinEasy 4D, 4 Way Scroll 4D: 6 + * Cable-Free 4D: 8 (4DPLUS) + * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS) + */ + if (id != PSM_4DMOUSE_ID) + return (FALSE); - sc->hw.hwid = id; - sc->hw.buttons = 3; /* XXX some 4D mice have 4? */ + sc->hw.hwid = id; + sc->hw.buttons = 3; /* XXX some 4D mice have 4? */ - return TRUE; + return (TRUE); } /* A4 Tech 4D+ Mouse */ static int enable_4dplus(struct psm_softc *sc) { - /* - * Newer wheel mice from A4 Tech seem to use this protocol. - * Older models are recognized as either 4D Mouse or IntelliMouse. - */ - KBDC kbdc = sc->kbdc; - int id; + /* + * Newer wheel mice from A4 Tech seem to use this protocol. + * Older models are recognized as either 4D Mouse or IntelliMouse. + */ + KBDC kbdc = sc->kbdc; + int id; - /* - * enable_4dmouse() already issued the following ID sequence... - static unsigned char rate[] = { 200, 100, 80, 60, 40, 20 }; - int i; + /* + * enable_4dmouse() already issued the following ID sequence... + static u_char rate[] = { 200, 100, 80, 60, 40, 20 }; + int i; - for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) { - if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) - return FALSE; - } - */ + for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) + if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i]) + return (FALSE); + */ - id = get_aux_id(kbdc); - switch (id) { - case PSM_4DPLUS_ID: - sc->hw.buttons = 4; - break; - case PSM_4DPLUS_RFSW35_ID: - sc->hw.buttons = 3; - break; - default: - return FALSE; - } + id = get_aux_id(kbdc); + switch (id) { + case PSM_4DPLUS_ID: + sc->hw.buttons = 4; + break; + case PSM_4DPLUS_RFSW35_ID: + sc->hw.buttons = 3; + break; + default: + return (FALSE); + } - sc->hw.hwid = id; + sc->hw.hwid = id; - return TRUE; + return (TRUE); } /* Synaptics Touchpad */ static int enable_synaptics(struct psm_softc *sc) { - int status[3]; - KBDC kbdc; + int status[3]; + KBDC kbdc; - if (!synaptics_support) - return (FALSE); + if (!synaptics_support) + return (FALSE); - /* Attach extra synaptics sysctl nodes under hw.psm.synaptics */ - sysctl_ctx_init(&sc->syninfo.sysctl_ctx); - sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx, - SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "synaptics", - CTLFLAG_RD, 0, "Synaptics TouchPad"); - - /* - * synaptics_directional_scrolls - if non-zero, the directional - * pad scrolls, otherwise it registers as a middle-click. - */ - sc->syninfo.directional_scrolls = 1; - SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, - SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), - OID_AUTO, "directional_scrolls", CTLFLAG_RW, - &sc->syninfo.directional_scrolls, 0, - "directional pad scrolls (1=yes 0=3rd button)"); + /* Attach extra synaptics sysctl nodes under hw.psm.synaptics */ + sysctl_ctx_init(&sc->syninfo.sysctl_ctx); + sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx, + SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "synaptics", CTLFLAG_RD, + 0, "Synaptics TouchPad"); - /* - * Synaptics_low_speed_threshold - the number of touchpad units - * below-which we go into low-speed tracking mode. - */ - sc->syninfo.low_speed_threshold = 20; - SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, - SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), - OID_AUTO, "low_speed_threshold", CTLFLAG_RW, - &sc->syninfo.low_speed_threshold, 0, - "threshold between low and hi speed positioning"); + /* + * synaptics_directional_scrolls - if non-zero, the directional + * pad scrolls, otherwise it registers as a middle-click. + */ + sc->syninfo.directional_scrolls = 1; + SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, + SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, + "directional_scrolls", CTLFLAG_RW, + &sc->syninfo.directional_scrolls, 0, + "directional pad scrolls (1=yes 0=3rd button)"); - /* - * Synaptics_min_movement - the number of touchpad units below - * which we ignore altogether. - */ - sc->syninfo.min_movement = 2; - SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, - SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), - OID_AUTO, "min_movement", CTLFLAG_RW, - &sc->syninfo.min_movement, 0, - "ignore touchpad movements less than this"); + /* + * Synaptics_low_speed_threshold - the number of touchpad units + * below-which we go into low-speed tracking mode. + */ + sc->syninfo.low_speed_threshold = 20; + SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, + SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, + "low_speed_threshold", CTLFLAG_RW, + &sc->syninfo.low_speed_threshold, 0, + "threshold between low and hi speed positioning"); - /* - * Synaptics_squelch_level - level at which we squelch movement - * packets. - * - * This effectively sends 1 out of every synaptics_squelch_level - * packets when * running in low-speed mode. - */ - sc->syninfo.squelch_level=3; - SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, - SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), - OID_AUTO, "squelch_level", CTLFLAG_RW, - &sc->syninfo.squelch_level, 0, - "squelch level for synaptics touchpads"); + /* + * Synaptics_min_movement - the number of touchpad units below + * which we ignore altogether. + */ + sc->syninfo.min_movement = 2; + SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, + SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, + "min_movement", CTLFLAG_RW, + &sc->syninfo.min_movement, 0, + "ignore touchpad movements less than this"); - kbdc = sc->kbdc; - disable_aux_dev(kbdc); - sc->hw.buttons = 3; - sc->squelch = 0; + /* + * Synaptics_squelch_level - level at which we squelch movement + * packets. + * + * This effectively sends 1 out of every synaptics_squelch_level + * packets when * running in low-speed mode. + */ + sc->syninfo.squelch_level=3; + SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx, + SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO, + "squelch_level", CTLFLAG_RW, + &sc->syninfo.squelch_level, 0, + "squelch level for synaptics touchpads"); - /* Just to be on the safe side */ - set_mouse_scaling(kbdc, 1); - - /* Identify the Touchpad version */ - if (mouse_ext_command(kbdc, 0) == 0) - return (FALSE); - if (get_mouse_status(kbdc, status, 0, 3) != 3) - return (FALSE); - if (status[1] != 0x47) - return (FALSE); + kbdc = sc->kbdc; + disable_aux_dev(kbdc); + sc->hw.buttons = 3; + sc->squelch = 0; - sc->synhw.infoMinor = status[0]; - sc->synhw.infoMajor = status[2] & 0x0f; + /* Just to be on the safe side */ + set_mouse_scaling(kbdc, 1); - if (verbose >= 2) - printf("Synaptics Touchpad v%d.%d\n", - sc->synhw.infoMajor, sc->synhw.infoMinor); + /* Identify the Touchpad version */ + if (mouse_ext_command(kbdc, 0) == 0) + return (FALSE); + if (get_mouse_status(kbdc, status, 0, 3) != 3) + return (FALSE); + if (status[1] != 0x47) + return (FALSE); - if (sc->synhw.infoMajor < 4) { - printf(" Unsupported (pre-v4) Touchpad detected\n"); - return (FALSE); - } + sc->synhw.infoMinor = status[0]; + sc->synhw.infoMajor = status[2] & 0x0f; - /* Get the Touchpad model information */ - if (mouse_ext_command(kbdc, 3) == 0) - return (FALSE); - if (get_mouse_status(kbdc, status, 0, 3) != 3) - return (FALSE); - if ((status[1] & 0x01) != 0) { - printf(" Failed to read model information\n"); - return (FALSE); - } + if (verbose >= 2) + printf("Synaptics Touchpad v%d.%d\n", sc->synhw.infoMajor, + sc->synhw.infoMinor); - sc->synhw.infoRot180 = (status[0] & 0x80) >> 7; - sc->synhw.infoPortrait = (status[0] & 0x40) >> 6; - sc->synhw.infoSensor = status[0] & 0x3f; - sc->synhw.infoHardware = (status[1] & 0xfe) >> 1; - sc->synhw.infoNewAbs = (status[2] & 0x80) >> 7; - sc->synhw.capPen = (status[2] & 0x40) >> 6; - sc->synhw.infoSimplC = (status[2] & 0x20) >> 5; - sc->synhw.infoGeometry = status[2] & 0x0f; + if (sc->synhw.infoMajor < 4) { + printf(" Unsupported (pre-v4) Touchpad detected\n"); + return (FALSE); + } - if (verbose >= 2) { - printf(" Model information:\n"); - printf(" infoRot180: %d\n", sc->synhw.infoRot180); - printf(" infoPortrait: %d\n", sc->synhw.infoPortrait); - printf(" infoSensor: %d\n", sc->synhw.infoSensor); - printf(" infoHardware: %d\n", sc->synhw.infoHardware); - printf(" infoNewAbs: %d\n", sc->synhw.infoNewAbs); - printf(" capPen: %d\n", sc->synhw.capPen); - printf(" infoSimplC: %d\n", sc->synhw.infoSimplC); - printf(" infoGeometry: %d\n", sc->synhw.infoGeometry); - } + /* Get the Touchpad model information */ + if (mouse_ext_command(kbdc, 3) == 0) + return (FALSE); + if (get_mouse_status(kbdc, status, 0, 3) != 3) + return (FALSE); + if ((status[1] & 0x01) != 0) { + printf(" Failed to read model information\n"); + return (FALSE); + } - /* Read the extended capability bits */ - if (mouse_ext_command(kbdc, 2) == 0) - return (FALSE); - if (get_mouse_status(kbdc, status, 0, 3) != 3) - return (FALSE); - if (status[1] != 0x47) { - printf(" Failed to read extended capability bits\n"); - return (FALSE); - } + sc->synhw.infoRot180 = (status[0] & 0x80) >> 7; + sc->synhw.infoPortrait = (status[0] & 0x40) >> 6; + sc->synhw.infoSensor = status[0] & 0x3f; + sc->synhw.infoHardware = (status[1] & 0xfe) >> 1; + sc->synhw.infoNewAbs = (status[2] & 0x80) >> 7; + sc->synhw.capPen = (status[2] & 0x40) >> 6; + sc->synhw.infoSimplC = (status[2] & 0x20) >> 5; + sc->synhw.infoGeometry = status[2] & 0x0f; - /* Set the different capabilities when they exist */ - if ((status[0] & 0x80) >> 7) { - sc->synhw.capExtended = (status[0] & 0x80) >> 7; - sc->synhw.capPassthrough = (status[2] & 0x80) >> 7; - sc->synhw.capSleep = (status[2] & 0x10) >> 4; - sc->synhw.capFourButtons = (status[2] & 0x08) >> 3; - sc->synhw.capMultiFinger = (status[2] & 0x02) >> 1; - sc->synhw.capPalmDetect = (status[2] & 0x01); - if (verbose >= 2) { - printf(" Extended capabilities:\n"); - printf(" capExtended: %d\n", sc->synhw.capExtended); - printf(" capPassthrough: %d\n", sc->synhw.capPassthrough); - printf(" capSleep: %d\n", sc->synhw.capSleep); - printf(" capFourButtons: %d\n", sc->synhw.capFourButtons); - printf(" capMultiFinger: %d\n", sc->synhw.capMultiFinger); - printf(" capPalmDetect: %d\n", sc->synhw.capPalmDetect); + printf(" Model information:\n"); + printf(" infoRot180: %d\n", sc->synhw.infoRot180); + printf(" infoPortrait: %d\n", sc->synhw.infoPortrait); + printf(" infoSensor: %d\n", sc->synhw.infoSensor); + printf(" infoHardware: %d\n", sc->synhw.infoHardware); + printf(" infoNewAbs: %d\n", sc->synhw.infoNewAbs); + printf(" capPen: %d\n", sc->synhw.capPen); + printf(" infoSimplC: %d\n", sc->synhw.infoSimplC); + printf(" infoGeometry: %d\n", sc->synhw.infoGeometry); + } + + /* Read the extended capability bits */ + if (mouse_ext_command(kbdc, 2) == 0) + return (FALSE); + if (get_mouse_status(kbdc, status, 0, 3) != 3) + return (FALSE); + if (status[1] != 0x47) { + printf(" Failed to read extended capability bits\n"); + return (FALSE); + } + + /* Set the different capabilities when they exist */ + if ((status[0] & 0x80) >> 7) { + sc->synhw.capExtended = (status[0] & 0x80) >> 7; + sc->synhw.capPassthrough = (status[2] & 0x80) >> 7; + sc->synhw.capSleep = (status[2] & 0x10) >> 4; + sc->synhw.capFourButtons = (status[2] & 0x08) >> 3; + sc->synhw.capMultiFinger = (status[2] & 0x02) >> 1; + sc->synhw.capPalmDetect = (status[2] & 0x01); + + if (verbose >= 2) { + printf(" Extended capabilities:\n"); + printf(" capExtended: %d\n", sc->synhw.capExtended); + printf(" capPassthrough: %d\n", + sc->synhw.capPassthrough); + printf(" capSleep: %d\n", sc->synhw.capSleep); + printf(" capFourButtons: %d\n", + sc->synhw.capFourButtons); + printf(" capMultiFinger: %d\n", + sc->synhw.capMultiFinger); + printf(" capPalmDetect: %d\n", + sc->synhw.capPalmDetect); + } + + /* + * if we have bits set in status[0] & 0x70 - then we can load + * more information about buttons using query 0x09 + */ + if (status[0] & 0x70) { + if (mouse_ext_command(kbdc, 0x09) == 0) + return (FALSE); + if (get_mouse_status(kbdc, status, 0, 3) != 3) + return (FALSE); + sc->hw.buttons = ((status[1] & 0xf0) >> 4) + 3; + if (verbose >= 2) + printf(" Additional Buttons: %d\n", + sc->hw.buttons -3); + } + } else { + sc->synhw.capExtended = 0; + + if (verbose >= 2) + printf(" No extended capabilities\n"); } /* - * if we have bits set in status[0] & 0x70 - then we can load - * more information about buttons using query 0x09 + * Read the mode byte + * + * XXX: Note the Synaptics documentation also defines the first + * byte of the response to this query to be a constant 0x3b, this + * does not appear to be true for Touchpads with guest devices. */ - if (status[0] & 0x70) { - if (mouse_ext_command(kbdc, 0x09) == 0) + if (mouse_ext_command(kbdc, 1) == 0) return (FALSE); - if (get_mouse_status(kbdc, status, 0, 3) != 3) + if (get_mouse_status(kbdc, status, 0, 3) != 3) + return (FALSE); + if (status[1] != 0x47) { + printf(" Failed to read mode byte\n"); return (FALSE); - sc->hw.buttons = ((status[1] & 0xf0) >> 4) + 3; - if (verbose >= 2) - printf(" Additional Buttons: %d\n", sc->hw.buttons -3); } - } else { - sc->synhw.capExtended = 0; - - if (verbose >= 2) - printf(" No extended capabilities\n"); - } + /* Set the mode byte -- request wmode where available */ + if (sc->synhw.capExtended) + mouse_ext_command(kbdc, 0xc1); + else + mouse_ext_command(kbdc, 0xc0); - /* - * Read the mode byte - * - * XXX: Note the Synaptics documentation also defines the first - * byte of the response to this query to be a constant 0x3b, this - * does not appear to be true for Touchpads with guest devices. - */ - if (mouse_ext_command(kbdc, 1) == 0) - return (FALSE); - if (get_mouse_status(kbdc, status, 0, 3) != 3) - return (FALSE); - if (status[1] != 0x47) { - printf(" Failed to read mode byte\n"); - return (FALSE); - } + /* Reset the sampling rate */ + set_mouse_sampling_rate(kbdc, 20); - /* Set the mode byte -- request wmode where available */ - if (sc->synhw.capExtended) - mouse_ext_command(kbdc, 0xc1); - else - mouse_ext_command(kbdc, 0xc0); + /* + * Report the correct number of buttons + * + * XXX: I'm not sure this is used anywhere. + */ + if (sc->synhw.capExtended && sc->synhw.capFourButtons) + sc->hw.buttons = 4; - /* Reset the sampling rate */ - set_mouse_sampling_rate(kbdc, 20); - - /* - * Report the correct number of buttons - * - * XXX: I'm not sure this is used anywhere. - */ - if (sc->synhw.capExtended && sc->synhw.capFourButtons) - sc->hw.buttons = 4; - - return (TRUE); + return (TRUE); } /* Interlink electronics VersaPad */ static int enable_versapad(struct psm_softc *sc) { - KBDC kbdc = sc->kbdc; - int data[3]; + KBDC kbdc = sc->kbdc; + int data[3]; - set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */ - set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */ - set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ - set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ - set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ - set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ - if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */ - return FALSE; - if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */ - return FALSE; - set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ + set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */ + set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */ + set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ + set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ + set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ + set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ + if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */ + return (FALSE); + if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */ + return (FALSE); + set_mouse_scaling(kbdc, 1); /* set scale 1:1 */ - sc->config |= PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND; + sc->config |= PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND; - return TRUE; /* PS/2 absolute mode */ + return (TRUE); /* PS/2 absolute mode */ } /* @@ -3557,7 +3644,7 @@ timeelapsed(start, secs, usecs, now) getmicrouptime(&snow); now = &snow; } - + tv.tv_sec = secs; tv.tv_usec = usecs; timevaladd(&tv, start); @@ -3567,29 +3654,29 @@ timeelapsed(start, secs, usecs, now) static int psmresume(device_t dev) { - struct psm_softc *sc = device_get_softc(dev); - int unit = device_get_unit(dev); - int err; + struct psm_softc *sc = device_get_softc(dev); + int unit = device_get_unit(dev); + int err; - VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit)); + VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit)); - if (!(sc->config & PSM_CONFIG_HOOKRESUME)) - return (0); + if (!(sc->config & PSM_CONFIG_HOOKRESUME)) + return (0); - err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND); + err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND); - if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) { - /* - * Release the blocked process; it must be notified that the device - * cannot be accessed anymore. - */ - sc->state &= ~PSM_ASLP; - wakeup(sc); - } + if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) { + /* + * Release the blocked process; it must be notified that + * the device cannot be accessed anymore. + */ + sc->state &= ~PSM_ASLP; + wakeup(sc); + } - VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit)); + VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit)); - return (err); + return (err); } DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0); @@ -3618,7 +3705,7 @@ static device_attach_t psmcpnp_attach; static device_method_t psmcpnp_methods[] = { DEVMETHOD(device_probe, psmcpnp_probe), DEVMETHOD(device_attach, psmcpnp_attach), - + { 0, 0 } }; @@ -3653,18 +3740,18 @@ create_a_copy(device_t atkbdc, device_t me) /* find the PS/2 mouse device instance under the keyboard controller */ psm = device_find_child(atkbdc, PSM_DRIVER_NAME, - device_get_unit(atkbdc)); + device_get_unit(atkbdc)); if (psm == NULL) - return ENXIO; + return (ENXIO); if (device_get_state(psm) != DS_NOTPRESENT) - return 0; + return (0); /* move our resource to the found device */ irq = bus_get_resource_start(me, SYS_RES_IRQ, 0); bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1); /* ...then probe and attach it */ - return device_probe_and_attach(psm); + return (device_probe_and_attach(psm)); } static int @@ -3675,7 +3762,7 @@ psmcpnp_probe(device_t dev) int rid; if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids)) - return ENXIO; + return (ENXIO); /* * The PnP BIOS and ACPI are supposed to assign an IRQ (12) @@ -3688,14 +3775,13 @@ psmcpnp_probe(device_t dev) irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid); if (irq <= 0) { if (resource_long_value(PSM_DRIVER_NAME, - device_get_unit(dev), "irq", &irq) != 0) + device_get_unit(dev),"irq", &irq) != 0) irq = 12; /* XXX */ device_printf(dev, "irq resource info is missing; " - "assuming irq %ld\n", irq); + "assuming irq %ld\n", irq); bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1); } - res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, - RF_SHAREABLE); + res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE); bus_release_resource(dev, SYS_RES_IRQ, rid, res); /* keep quiet */ @@ -3713,10 +3799,10 @@ psmcpnp_attach(device_t dev) /* find the keyboard controller, which may be on acpi* or isa* bus */ atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME), - device_get_unit(dev)); - if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED)) { + device_get_unit(dev)); + if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED)) create_a_copy(atkbdc, dev); - } else { + else { /* * If we don't have the AT keyboard controller yet, * just reserve the IRQ for later use... @@ -3726,7 +3812,7 @@ psmcpnp_attach(device_t dev) bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE); } - return 0; + return (0); } DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);