Vendor import of OpenSSL 0.9.7a.

svn path=/vendor-crypto/openssl/dist/; revision=111147

crypto/openssl/CHANGES

@@ -2,6 +2,87 @@
  OpenSSL CHANGES
  _______________
 
+ Changes between 0.9.7 and 0.9.7a  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+  *) Make the no-err option work as intended.  The intention with no-err
+     is not to have the whole error stack handling routines removed from
+     libcrypto, it's only intended to remove all the function name and
+     reason texts, thereby removing some of the footprint that may not
+     be interesting if those errors aren't displayed anyway.
+
+     NOTE: it's still possible for any application or module to have it's
+     own set of error texts inserted.  The routines are there, just not
+     used by default when no-err is given.
+     [Richard Levitte]
+
+  *) Add support for FreeBSD on IA64.
+     [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
+
+  *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
+     Kerberos function mit_des_cbc_cksum().  Before this change,
+     the value returned by DES_cbc_cksum() was like the one from
+     mit_des_cbc_cksum(), except the bytes were swapped.
+     [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
+
+  *) Allow an application to disable the automatic SSL chain building.
+     Before this a rather primitive chain build was always performed in
+     ssl3_output_cert_chain(): an application had no way to send the 
+     correct chain if the automatic operation produced an incorrect result.
+
+     Now the chain builder is disabled if either:
+
+     1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
+
+     2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
+
+     The reasoning behind this is that an application would not want the
+     auto chain building to take place if extra chain certificates are
+     present and it might also want a means of sending no additional
+     certificates (for example the chain has two certificates and the
+     root is omitted).
+     [Steve Henson]
+
+  *) Add the possibility to build without the ENGINE framework.
+     [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
+
+  *) Under Win32 gmtime() can return NULL: check return value in
+     OPENSSL_gmtime(). Add error code for case where gmtime() fails.
+     [Steve Henson]
+
+  *) DSA routines: under certain error conditions uninitialized BN objects
+     could be freed. Solution: make sure initialization is performed early
+     enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
+     Nils Larsch <nla@trustcenter.de> via PR#459)
+     [Lutz Jaenicke]
+
+  *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
+     checked on reconnect on the client side, therefore session resumption
+     could still fail with a "ssl session id is different" error. This
+     behaviour is masked when SSL_OP_ALL is used due to
+     SSL_OP_MICROSOFT_SESS_ID_BUG being set.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     followup to PR #377.
+     [Lutz Jaenicke]
+
+  *) IA-32 assembler support enhancements: unified ELF targets, support
+     for SCO/Caldera platforms, fix for Cygwin shared build.
+     [Andy Polyakov]
+
+  *) Add support for FreeBSD on sparc64.  As a consequence, support for
+     FreeBSD on non-x86 processors is separate from x86 processors on
+     the config script, much like the NetBSD support.
+     [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
+
  Changes between 0.9.6h and 0.9.7  [31 Dec 2002]
 
   *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
@@ -177,7 +258,7 @@
 	# is assumed to contain the absolute OpenSSL source directory.
 	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
 	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
 		mkdir -p `dirname $F`
 		ln -s $OPENSSL_SOURCE/$F $F
 	done
@@ -1677,6 +1758,11 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
      be reduced modulo  m.
      [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
 
+#if 0
+     The following entry accidentily appeared in the CHANGES file
+     distributed with OpenSSL 0.9.7.  The modifications described in
+     it do *not* apply to OpenSSL 0.9.7.
+
   *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
      was actually never needed) and in BN_mul().  The removal in BN_mul()
      required a small change in bn_mul_part_recursive() and the addition
@@ -1685,6 +1771,7 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
      bn_sub_words() and bn_add_words() except they take arrays with
      differing sizes.
      [Richard Levitte]
+#endif
 
   *) In 'openssl passwd', verify passwords read from the terminal
      unless the '-salt' option is used (which usually means that
@@ -1816,6 +1903,18 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
   *) Clean old EAY MD5 hack from e_os.h.
      [Richard Levitte]
 
+ Changes between 0.9.6h and 0.9.6i  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CAN-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
  Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]
 
   *) New function OPENSSL_cleanse(), which is used to cleanse a section of

crypto/openssl/Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -38,6 +38,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
+# no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -107,7 +108,6 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 
-my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -161,7 +161,7 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -262,22 +262,21 @@ my %table=(
 "hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # IA-64 targets
-# I have no idea if this one actually works, feedback needed. <appro>
-"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
 # with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
@@ -384,8 +383,8 @@ my %table=(
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -396,6 +395,8 @@ my %table=(
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -403,7 +404,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -414,33 +415,36 @@ my %table=(
 # Linux on ARM
 "linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
+# SCO/Caldera targets.
+#
+# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
+# Now we only have blended unixware-* as it's the only one used by ./config.
+# If you want to optimize for particular microarchitecture, bypass ./config
+# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
+# Note that not all targets include assembler support. Mostly because of
+# lack of motivation to support out-of-date platforms with out-of-date
+# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
+# patiently assisted to debug most of it.
+#
 # UnixWare 2.0x fails destest with -O
 "unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -DNO_STRINGS_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-
-# UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-# UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# OpenUNIX 8
-"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:aix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
 "aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn::::::-X 64",
+"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
 
 #
 # Cray T90 and similar (SDSC)
@@ -473,15 +477,6 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
-# SCO 3 - Tim Rice <tim@multitalents.net>
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
-# SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
-"sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-fPIC",
-
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
 "ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -508,7 +503,7 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
 # Mingw32
@@ -656,6 +651,7 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
+my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
@@ -696,6 +692,11 @@ PROCESS_ARGS:
 			$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
+		elsif (/^no-err$/)
+		 	{
+			$flags .= "-DOPENSSL_NO_ERR ";
+			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
+			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
@@ -956,6 +957,8 @@ my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
 my $arflags = $fields[$idx_arflags];
 
+my $no_shared_warn=0;
+
 $cflags="$flags$cflags" if ($flags ne "");
 
 # Kerberos settings.  The flavor must be provided from outside, either through
@@ -1020,8 +1023,6 @@ else
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
-
-	$libs.=$withargs{"krb5-lib"}." " if $withargs{"krb5-lib"} ne "";
 	}
 
 # The DSO code currently always implements all functions so that no
@@ -1107,6 +1108,7 @@ if ($zlib)
 my $shared_mark = "";
 if ($shared_target eq "")
 	{
+	$no_shared_warn = 1 if !$no_shared;
 	$no_shared = 1;
 	}
 if (!$no_shared)
@@ -1240,6 +1242,7 @@ while (<IN>)
 	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
+	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
 	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
@@ -1513,6 +1516,16 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF
 
+print <<\EOF if ($no_shared_warn);
+
+You gave the option 'shared'.  Normally, that would give you shared libraries.
+Unfortunately, the OpenSSL configuration doesn't include shared library support
+for this platform yet, so it will pretend you gave the option 'no-shared'.  If
+you can inform the developpers (openssl-dev\@openssl.org) how to support shared
+libraries on this platform, they will at least look at it and try their best
+(but please first make sure you have tried with a current version of OpenSSL).
+EOF
+
 exit(0);
 
 sub usage

crypto/openssl/FAQ

@@ -68,7 +68,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7 was released on December 31, 2002.
+OpenSSL 0.9.7a was released on February 19, 2003.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -189,18 +189,30 @@ for permission to use their software with OpenSSL.
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" that serves this purpose.  On other systems, applications have
-to call the RAND_add() or RAND_seed() function with appropriate data
-before generating keys or performing public key encryption.
-(These functions initialize the pseudo-random number generator, PRNG.)
+device" (/dev/urandom or /dev/random) that serves this purpose.
+All OpenSSL versions try to use /dev/urandom by default; starting with
+version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
+available.
 
-Some broken applications do not do this.  As of version 0.9.5, the
-OpenSSL functions that need randomness report an error if the random
-number generator has not been seeded with at least 128 bits of
-randomness.  If this error occurs, please contact the author of the
-application you are using.  It is likely that it never worked
-correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
-to perform potentially insecure encryption.
+On other systems, applications have to call the RAND_add() or
+RAND_seed() function with appropriate data before generating keys or
+performing public key encryption. (These functions initialize the
+pseudo-random number generator, PRNG.)  Some broken applications do
+not do this.  As of version 0.9.5, the OpenSSL functions that need
+randomness report an error if the random number generator has not been
+seeded with at least 128 bits of randomness.  If this error occurs and
+is not discussed in the documentation of the application you are
+using, please contact the author of that application; it is likely
+that it never worked correctly.  OpenSSL 0.9.5 and later make the
+error visible by refusing to perform potentially insecure encryption.
+
+If you are using Solaris 8, you can add /dev/urandom and /dev/random
+devices by installing patch 112438 (Sparc) or 112439 (x86), which are
+available via the Patchfinder at <URL: http://sunsolve.sun.com>
+(Solaris 9 includes these devices by default). For /dev/random support
+for earlier Solaris versions, see Sun's statement at
+<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
+(the SUNWski package is available in patch 105710).
 
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -233,18 +245,6 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 
-For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
-installing the SUNski package from Sun patch 105710-01 (Sparc) which
-adds a /dev/random device and make sure it gets used, usually through
-$RANDFILE.  There are probably similar patches for the other Solaris
-versions.  An official statement from Sun with respect to /dev/random
-support can be found at
-  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
-However, be warned that /dev/random is usually a blocking device, which
-may have some effects on OpenSSL.
-A third party /dev/random solution for Solaris is available at
-  http://www.cosy.sbg.ac.at/~andi/
-
 
 * Why do I get an "unable to write 'random state'" error message?
 
@@ -490,10 +490,13 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem, one should run VCVARS32.BAT which is found in
-the 'bin' subdirectory of the VC++ installation directory (somewhere
-under 'Program Files').  This needs to be done prior to running NMAKE,
-and the changes are only valid for the current DOS session.
+To solve that problem for VC++ versions up to 6, one should run
+VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
+installation directory (somewhere under 'Program Files').  For VC++
+version 7 (and up?), which is also called VS.NET, the file is called
+VSVARS32.BAT instead.
+This needs to be done prior to running NMAKE, and the changes are only
+valid for the current DOS session.
 
 
 * What is special about OpenSSL on Redhat?
@@ -577,10 +580,13 @@ As of 0.9.7 assembler routines were overhauled for position independence
 of the machine code, which is essential for shared library support. For
 some reason OpenBSD is equipped with an out-of-date GNU assembler which
 finds the new code offensive. To work around the problem, configure with
-no-asm (and sacrifice a great deal of performance) or upgrade /usr/bin/as.
+no-asm (and sacrifice a great deal of performance) or patch your assembler
+according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
 For your convenience a pre-compiled replacement binary is provided at
-http://www.openssl.org/~appro/i386-openbsd3-as, which is compiled from
-binutils-2.8 released in 1997.
+<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
+Reportedly elder *BSD a.out platforms also suffer from this problem and
+remedy should be same. Provided binary is statically linked and should be
+working across wider range of *BSD branches, not just OpenBSD.
 
 [PROG] ========================================================================
 

crypto/openssl/INSTALL

@@ -158,7 +158,7 @@
      If a test fails, look at the output.  There may be reasons for
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAGS line
+     try removing any compiler optimization flags from the CFLAG line
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
@@ -308,3 +308,25 @@
  to install additional support software to obtain random seed.
  Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
  and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+		mkdir -p `dirname $F`
+		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+		echo $F '->' $OPENSSL_SOURCE/$F
+	done
+	make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.

crypto/openssl/Makefile.org

@@ -72,6 +72,14 @@ TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
 
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAGS=$(CFLAG)
+
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -159,6 +167,7 @@ RMD160_ASM_OBJ= asm/rm86-out.o
 
 # KRB5 stuff
 KRB5_INCLUDES=
+LIBKRB5=
 
 # When we're prepared to use shared libraries in the programs we link here
 # we might set SHLIB_MARK to '$(SHARED_LIBS)'.
@@ -216,7 +225,7 @@ sub_all:
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAGS='${ASFLAGS}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -269,13 +278,16 @@ do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
@@ -283,22 +295,28 @@ DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	( set -x; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
 		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
 		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
-	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \
 	echo "" ; \
 	done
 
 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
 		-Wl,--no-whole-archive $$libs ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 # This assumes that GNU utilities are *not* used
@@ -307,11 +325,14 @@ do_alpha-osf1-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -323,11 +344,14 @@ do_tru64-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -339,12 +363,15 @@ do_tru64-shared-rpath:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-rpath  ${INSTALLTOP}/lib \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -355,6 +382,9 @@ do_solaris-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  MINUSZ='-z '; \
 		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
@@ -363,7 +393,7 @@ do_solaris-shared:
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
 			$$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -373,6 +403,9 @@ do_svr3-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -382,7 +415,7 @@ do_svr3-shared:
 		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -392,6 +425,9 @@ do_svr5-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -402,7 +438,7 @@ do_svr5-shared:
 			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -412,11 +448,14 @@ do_irix-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -433,6 +472,9 @@ do_irix-shared:
 #
 do_hpux-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
  		+vnocompatwarnings \
 		-b -z +s \
@@ -453,6 +495,9 @@ do_hpux-shared:
 #
 do_hpux64-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
  		-b -z \
 		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
@@ -495,17 +540,24 @@ SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
 SHAREDCMD=$(CC)
 do_aix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; \
-	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \
 	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
-	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+	    $(SHAREDCMD) $(SHAREDFLAGS) \
+		-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \
 		$$libs ${EX_LIBS} ) ) \
 	|| exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 do_reliantunix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
 	( set -x; \
 	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
@@ -515,7 +567,7 @@ do_reliantunix-shared:
 	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
 	) || exit 1; \
 	rm -rf $$tmpdir ; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 openssl.pc: Makefile.ssl
@@ -528,7 +580,7 @@ openssl.pc: Makefile.ssl
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
 Makefile.ssl: Makefile.org
@@ -601,8 +653,7 @@ rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
@@ -613,8 +664,7 @@ tests: rehash
 	@(cd test && echo "testing..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		apps/openssl version -a
 
@@ -749,7 +799,7 @@ install: all install_docs
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib\(.*\)/cyg\1-$(SHLIB_VERSION_NUMBER)/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
@@ -763,6 +813,12 @@ install: all install_docs
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
 			set $(MAKE); \
 			$$1 -f $$here/Makefile link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
 	fi
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
 

crypto/openssl/Makefile.ssl

@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=0.9.7
+VERSION=0.9.7a
 MAJOR=0
 MINOR=9.7
 SHLIB_VERSION_NUMBER=0.9.7
@@ -74,6 +74,14 @@ TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
 
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAGS=$(CFLAG)
+
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -161,6 +169,7 @@ RMD160_ASM_OBJ=
 
 # KRB5 stuff
 KRB5_INCLUDES=
+LIBKRB5=
 
 # When we're prepared to use shared libraries in the programs we link here
 # we might set SHLIB_MARK to '$(SHARED_LIBS)'.
@@ -218,7 +227,7 @@ sub_all:
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAGS='${ASFLAGS}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -271,13 +280,16 @@ do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
@@ -285,22 +297,28 @@ DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	( set -x; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
 		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
 		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
-	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \
 	echo "" ; \
 	done
 
 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
 		-Wl,--no-whole-archive $$libs ) || exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 # This assumes that GNU utilities are *not* used
@@ -309,11 +327,14 @@ do_alpha-osf1-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -325,11 +346,14 @@ do_tru64-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -341,12 +365,15 @@ do_tru64-shared-rpath:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-rpath  ${INSTALLTOP}/lib \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
 			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -357,6 +384,9 @@ do_solaris-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  MINUSZ='-z '; \
 		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
@@ -365,7 +395,7 @@ do_solaris-shared:
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
 			$$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -375,6 +405,9 @@ do_svr3-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -384,7 +417,7 @@ do_svr3-shared:
 		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -394,6 +427,9 @@ do_svr5-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
@@ -404,7 +440,7 @@ do_svr5-shared:
 			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -414,11 +450,14 @@ do_irix-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( set -x; ${CC} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -435,6 +474,9 @@ do_irix-shared:
 #
 do_hpux-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
  		+vnocompatwarnings \
 		-b -z +s \
@@ -455,6 +497,9 @@ do_hpux-shared:
 #
 do_hpux64-shared:
 	for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
  		-b -z \
 		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
@@ -497,17 +542,24 @@ SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
 SHAREDCMD=$(CC)
 do_aix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; \
-	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \
 	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
-	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+	    $(SHAREDCMD) $(SHAREDFLAGS) \
+		-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \
 		$$libs ${EX_LIBS} ) ) \
 	|| exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 do_reliantunix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
 	( set -x; \
 	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
@@ -517,7 +569,7 @@ do_reliantunix-shared:
 	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
 	) || exit 1; \
 	rm -rf $$tmpdir ; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 openssl.pc: Makefile.ssl
@@ -530,7 +582,7 @@ openssl.pc: Makefile.ssl
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
 Makefile.ssl: Makefile.org
@@ -603,8 +655,7 @@ rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time
@@ -615,8 +666,7 @@ tests: rehash
 	@(cd test && echo "testing..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		apps/openssl version -a
 
@@ -751,7 +801,7 @@ install: all install_docs
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib\(.*\)/cyg\1-$(SHLIB_VERSION_NUMBER)/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
@@ -765,6 +815,12 @@ install: all install_docs
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
 			set $(MAKE); \
 			$$1 -f $$here/Makefile link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
 	fi
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
 

crypto/openssl/NEWS

@@ -5,6 +5,17 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
+
+      o Security: Important security related bugfixes.
+      o Enhanced compatibility with MIT Kerberos.
+      o Can be built without the ENGINE framework.
+      o IA32 assembler enhancements.
+      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
+      o Configuration: the no-err option now works properly.
+      o SSL/TLS: now handles manual certificate chain building.
+      o SSL/TLS: certain session ID malfunctions corrected.
+
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
 
       o New library section OCSP.
@@ -51,6 +62,10 @@
       o SSL/TLS: add callback to retrieve SSL/TLS messages.
       o SSL/TLS: support AES cipher suites (RFC3268).
 
+  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
+
+      o Important security related bugfixes.
+
   Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
 
       o New configuration targets for Tandem OSS and A/UX.

crypto/openssl/PROBLEMS

@@ -70,3 +70,31 @@ if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
 this seems to be the fact that compiler emits multiplication to
 perform shift operations:-( To work the problem around configure
 with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
+
+* Problems with hp-parisc2-cc target when used with "no-asm" flag
+
+When using the hp-parisc2-cc target, wrong bignum code is generated.
+This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
+aggressive optimization.
+The problem manifests itself by the BN_kronecker test hanging in an
+endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
+which itself hangs. The reason could be tracked down to the bn_mul_comba8()
+function in bn_asm.c. At some occasions the higher 32bit value of r[7]
+is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
+as no debugger support possible at +O3 and additional fprintf()'s
+introduced fixed the bug, therefore it is most likely a bug in the
+optimizer.
+The bug was found in the BN_kronecker test but may also lead to
+failures in other parts of the code.
+(See Ticket #426.)
+
+Workaround: modify the target to +O2 when building with no-asm.
+
+* Poor support for AIX shared builds.
+
+do_aix-shared rule is not flexible enough to parameterize through a
+config-line. './Configure aix43-cc shared' is working, but not
+'./Configure aix64-gcc shared'. In latter case make fails to create shared
+libraries. It's possible to build 64-bit shared libraries by running
+'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
+supporting even gcc shared builds. See RT#463 for background information.

crypto/openssl/README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.7 31 Dec 2002
+ OpenSSL 0.9.7a Feb 19 2003
 
- Copyright (c) 1998-2002 The OpenSSL Project
+ Copyright (c) 1998-2003 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

crypto/openssl/apps/Makefile.ssl

@@ -18,6 +18,7 @@ PERL=		perl
 RM=		rm -f
 # KRB5 stuff
 KRB5_INCLUDES=
+LIBKRB5=
 
 PEX_LIBS=
 EX_LIBS= 
@@ -150,8 +151,7 @@ $(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	fi
 	-(cd ..; OPENSSL="`pwd`/apps/openssl"; export OPENSSL; \
 		LIBPATH="`pwd`"; LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; \
-		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
-		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
 		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 

crypto/openssl/apps/apps.c

@@ -122,7 +122,9 @@
 #include <openssl/pkcs12.h>
 #include <openssl/ui.h>
 #include <openssl/safestack.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 #ifdef OPENSSL_SYS_WINDOWS
 #define strcasecmp _stricmp
@@ -859,6 +861,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -868,6 +871,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -935,6 +939,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -944,6 +949,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -1329,6 +1335,7 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath)
 	return NULL;
 }
 
+#ifndef OPENSSL_NO_ENGINE
 /* Try to load an engine in a shareable library */
 static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
 	{
@@ -1385,6 +1392,7 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
         return e;
         }
+#endif
 
 int load_config(BIO *err, CONF *cnf)
 	{

crypto/openssl/apps/apps.h

@@ -121,7 +121,9 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -179,30 +181,57 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-   defined(OPENSSL_SYS_WIN32)
-#    ifdef _O_BINARY
-#      define apps_startup() \
-		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#  ifndef OPENSSL_NO_ENGINE
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      endif
 #    else
 #      define apps_startup() \
-		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+			setup_ui_method(); } while(0)
 #    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  else
-#    define apps_startup() \
-		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-		setup_ui_method(); } while(0)
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); \
+			setup_ui_method(); } while(0)
+#    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  endif
-#  define apps_shutdown() \
-		do { CONF_modules_unload(1); destroy_ui_method(); \
-		EVP_cleanup(); ENGINE_cleanup(); \
-		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-		ERR_free_strings(); } while(0)
 #endif
 
 typedef struct args_st
@@ -248,7 +277,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
+#endif
 
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);

crypto/openssl/apps/ca.c

@@ -196,7 +196,9 @@ static char *ca_usage[]={
 " -extensions ..  - Extension section (override value in config file)\n",
 " -extfile file   - Configuration file with X509v3 extentions to add\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -status serial  - Shows certificate status given the serial number\n",
 " -updatedb       - Updates db for expired certificates\n",
 NULL
@@ -333,7 +335,9 @@ int MAIN(int argc, char **argv)
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *tofree=NULL;
 
 #ifdef EFENCE
@@ -537,11 +541,13 @@ EF_ALIGNMENT=0;
 			rev_arg = *(++argv);
 			rev_type = REV_CA_COMPROMISE;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 bad:
@@ -562,7 +568,9 @@ EF_ALIGNMENT=0;
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
 	e = setup_engine(bio_err, engine, 0);
+#endif
 
 	/*****************************************************************/
 	tofree=NULL;
@@ -597,7 +605,10 @@ EF_ALIGNMENT=0;
 		goto err;
 		}
 	if(tofree)
+		{
 		OPENSSL_free(tofree);
+		tofree = NULL;
+		}
 
 	if (!load_config(bio_err, conf))
 		goto err;
@@ -1633,11 +1644,12 @@ EF_ALIGNMENT=0;
 	BIO_free_all(out);
 	BIO_free_all(in);
 
-	sk_X509_pop_free(cert_sk,X509_free);
+	if (cert_sk)
+		sk_X509_pop_free(cert_sk,X509_free);
 
 	if (ret) ERR_print_errors(bio_err);
 	app_RAND_write_file(randfile, bio_err);
-	if (free_key)
+	if (free_key && key)
 		OPENSSL_free(key);
 	BN_free(serial);
 	TXT_DB_free(db);

crypto/openssl/apps/dgst.c

@@ -100,7 +100,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -166,11 +168,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
@@ -208,7 +212,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -228,7 +234,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());

crypto/openssl/apps/dh.c

@@ -87,12 +87,17 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 
 	apps_startup();
 
@@ -103,7 +108,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -170,13 +179,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());

crypto/openssl/apps/dhparam.c

@@ -148,7 +148,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,7 +159,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -199,11 +204,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -249,7 +256,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -259,7 +268,9 @@ int MAIN(int argc, char **argv)
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (g && !num)
 		num = DEFBITS;

crypto/openssl/apps/dsa.c

@@ -90,7 +90,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -98,7 +100,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -112,7 +117,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -153,11 +160,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -189,7 +198,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -207,7 +218,9 @@ int MAIN(int argc, char **argv)
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");

crypto/openssl/apps/dsaparam.c

@@ -90,7 +90,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -98,7 +100,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -139,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -191,7 +197,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -235,7 +243,9 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (need_rand)
 		{

crypto/openssl/apps/enc.c

@@ -100,7 +100,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -119,7 +121,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 
 	apps_startup();
 
@@ -163,11 +167,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -270,7 +276,9 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
+#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -284,7 +292,9 @@ int MAIN(int argc, char **argv)
 		argv++;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (bufsize != NULL)
 		{

crypto/openssl/apps/engine.c

@@ -56,6 +56,8 @@
  *
  */
 
+#ifndef OPENSSL_NO_ENGINE
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -518,3 +520,4 @@ int MAIN(int argc, char **argv)
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#endif

crypto/openssl/apps/gendh.c

@@ -81,13 +81,17 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	BIO *out=NULL;
 
 	apps_startup();
@@ -115,11 +119,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -138,14 +144,18 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)

crypto/openssl/apps/gendsa.c

@@ -77,7 +77,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,7 +87,9 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -111,11 +115,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -167,7 +173,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -176,7 +184,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");

crypto/openssl/apps/genrsa.c

@@ -81,7 +81,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *inrand=NULL;
 	BIO *out=NULL;
 
@@ -122,11 +126,13 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -177,7 +183,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -191,7 +199,9 @@ int MAIN(int argc, char **argv)
 		goto err;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (outfile == NULL)
 		{

crypto/openssl/apps/ocsp.c

@@ -55,6 +55,7 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
+#ifndef OPENSSL_NO_OCSP
 
 #include <stdio.h>
 #include <string.h>
@@ -722,7 +723,12 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
+#ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
+#else
+		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
+		goto end;
+#endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -732,7 +738,16 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+			ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+			BIO_printf(bio_err, "SSL is disabled\n");
+			goto end;
+#endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -1139,7 +1154,11 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
+#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
+#else
+	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
+#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1226,3 +1245,4 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}
 
+#endif

crypto/openssl/apps/openssl.c

@@ -122,7 +122,9 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "progs.h"
 #include "s_apps.h"

crypto/openssl/apps/pkcs12.c

@@ -120,7 +120,9 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
+#endif
 
     apps_startup();
 
@@ -252,11 +254,13 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
+#endif
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -304,14 +308,18 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
+#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
+#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
+#endif
 
     if(passarg) {
 	if(export_cert) passargout = passarg;

crypto/openssl/apps/pkcs7.c

@@ -82,7 +82,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -134,11 +138,13 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -161,14 +167,18 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		ret = 1;
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());

crypto/openssl/apps/pkcs8.c

@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -145,11 +147,13 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
+#endif
 		else if (!strcmp (*args, "-in")) {
 			if (args[1]) {
 				args++;
@@ -182,11 +186,15 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		return (1);
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");

crypto/openssl/apps/progs.h

@@ -35,7 +35,9 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
+#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
+#endif
 extern int ocsp_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
@@ -92,7 +94,9 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
+#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
+#endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -111,7 +115,9 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
+#ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
+#endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},

crypto/openssl/apps/rand.c

@@ -76,7 +76,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -84,7 +86,9 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -106,6 +110,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -113,6 +118,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -150,13 +156,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)

crypto/openssl/apps/req.c

@@ -162,7 +162,9 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -210,11 +212,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -428,7 +432,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
+#endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -453,7 +459,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
-		BIO_printf(bio_err," -nameopt arg   - various certificate name options\n");
+		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
 		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}
@@ -617,7 +623,9 @@ int MAIN(int argc, char **argv)
 	if ((in == NULL) || (out == NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (keyfile != NULL)
 		{
@@ -1237,11 +1245,17 @@ start:		for (;;)
 
 			sprintf(buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
+				{
+				ERR_clear_error();
 				n_min = -1;
+				}
 
 			sprintf(buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
+				{
+				ERR_clear_error();
 				n_max = -1;
+				}
 
 			if (!add_DN_object(subj,v->value,def,value,nid,
 				n_min,n_max, chtype))

crypto/openssl/apps/rsa.c

@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	int modulus=0;
 
 	apps_startup();
@@ -156,11 +158,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -212,13 +216,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");

crypto/openssl/apps/rsautl.c

@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -125,9 +127,11 @@ int MAIN(int argc, char **argv)
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
+#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
+#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -162,7 +166,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
@@ -305,7 +311,9 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
 
 }
 

crypto/openssl/apps/s_client.c

@@ -222,7 +222,9 @@ static void sc_usage(void)
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
 	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 
 	}
@@ -254,8 +256,10 @@ int MAIN(int argc, char **argv)
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
+#endif
 #ifdef OPENSSL_SYS_WINDOWS
 	struct timeval tv;
 #endif
@@ -415,11 +419,13 @@ int MAIN(int argc, char **argv)
 			else
 				goto bad;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -444,7 +450,9 @@ int MAIN(int argc, char **argv)
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+#endif
 
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())

crypto/openssl/apps/s_server.c

@@ -242,7 +242,9 @@ static int s_msg=0;
 static int s_quiet=0;
 
 static int hack=0;
+#ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
+#endif
 static const char *session_id_prefix=NULL;
 
 #ifdef MONOLITH
@@ -267,7 +269,9 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
+#ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
+#endif
 	}
 #endif
 
@@ -316,7 +320,9 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
         BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -490,7 +496,9 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
+#endif
 	char *inrand=NULL;
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -665,11 +673,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -694,7 +704,9 @@ int MAIN(int argc, char *argv[])
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+#endif
 
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())

crypto/openssl/apps/smime.c

@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
         int keyform = FORMAT_PEM;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	args = argv + 1;
 	ret = 1;
@@ -176,11 +178,13 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
+#endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -330,7 +334,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -339,7 +345,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");

crypto/openssl/apps/speed.c

@@ -58,6 +58,8 @@
 
 /* most of this code has been pilfered from my libdes speed.c program */
 
+#ifndef OPENSSL_NO_SPEED
+
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
@@ -370,7 +372,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -590,6 +594,7 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -606,6 +611,7 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
+#endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -865,7 +871,9 @@ int MAIN(int argc, char **argv)
 #if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -1393,6 +1401,7 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
+				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1939,3 +1948,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
+#endif

crypto/openssl/apps/spkac.c

@@ -92,7 +92,9 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -141,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -171,7 +175,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
@@ -181,7 +187,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(keyfile) {
 		pkey = load_key(bio_err,

crypto/openssl/apps/verify.c

@@ -86,7 +86,9 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -142,11 +144,13 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
+#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -170,7 +174,9 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -219,7 +225,11 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," [-engine e]");
+#endif
+		BIO_printf(bio_err," cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;

crypto/openssl/apps/x509.c

@@ -131,7 +131,9 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -183,7 +185,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	reqfile=0;
 
@@ -360,11 +364,13 @@ int MAIN(int argc, char **argv)
 			alias= *(++argv);
 			trustout = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
@@ -450,7 +456,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);

crypto/openssl/config

@@ -74,34 +74,27 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.01" ]; then
-		    echo "${MACHINE}-whatever-unixware201"; exit 0
-		elif [ "x$VERSION" = "x2.02" ]; then
-		    echo "${MACHINE}-whatever-unixware202"; exit 0
-		elif [ "x$VERSION" = "x2.03" ]; then
-		    echo "${MACHINE}-whatever-unixware203"; exit 0
-		elif [ "x$VERSION" = "x2.1.1" ]; then
-		    echo "${MACHINE}-whatever-unixware211"; exit 0
-		elif [ "x$VERSION" = "x2.1.2" ]; then
-		    echo "${MACHINE}-whatever-unixware212"; exit 0
-		elif [ "x$VERSION" = "x2.1.3" ]; then
-		    echo "${MACHINE}-whatever-unixware213"; exit 0
-		else
-		    echo "${MACHINE}-whatever-unixware2"; exit 0
-		fi
+		case "x${VERSION}" in
+		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
+		esac
 		;;
 	    4.2)
-		echo "whatever-whatever-unixware1"; exit 0
-		;;
-	    OpenUNIX)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
-		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
-		fi
+		echo "i386-whatever-unixware1"; exit 0
 		;;
 	    5)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
-		    echo "${MACHINE}-sco-unixware7"; exit 0
-		fi
+		case "x${VERSION}" in
+		    # We hardcode i586 in place of ${MACHINE} for the
+		    # following reason. The catch is that even though Pentium
+		    # is minimum requirement for platforms in question,
+		    # ${MACHINE} gets always assigned to i386. Now, problem
+		    # with i386 is that it makes ./config pass 386 to
+		    # ./Configure, which in turn makes make generate
+		    # inefficient SHA-1 (for this moment) code.
+		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
+		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+		esac
 		;;
 	esac
     fi
@@ -196,7 +189,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;
 
-    FreeBSD:*)
+    FreeBSD:*:*:*386*)
         VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
         MACH=`sysctl -n hw.model`
         ARCH='whatever'
@@ -205,7 +198,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
            *486*       ) MACH="i486"     ;;
            Pentium\ II*) MACH="i686"     ;;
            Pentium*    ) MACH="i586"     ;;
-           Alpha*      ) MACH="alpha"    ;;
            *           ) MACH="$MACHINE" ;;
         esac
         case ${MACH} in
@@ -214,6 +206,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
         echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
         ;;
 
+    FreeBSD:*)
+	echo "${MACHINE}-whatever-freebsd"; exit 0
+	;;
+
     NetBSD:*:*:*386*)
         echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -461,6 +457,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
   fi
 fi
 
+if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
+    (cc) 2>&1 | grep -iv "command not found" > /dev/null && CC=cc
+fi
+
 CCVER=${CCVER:-0}
 
 # read the output of the embedded GuessOS 
@@ -547,7 +547,7 @@ EOF
   ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
   i386-apple-darwin*) OUT="darwin-i386-cc" ;;
   sparc64-*-linux2)
-	echo "WARNING! If *know* that your GNU C supports 64-bit/V9 ABI"
+	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
 	echo "         and wish to build 64-bit library, then you have to"
 	echo "         invoke './Configure linux64-sparcv9' *manually*."
 	if [ "$TEST" = "false" ]; then
@@ -640,6 +640,8 @@ EOF
   *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
   *-*-sunos4) OUT="sunos-$CC" ;;
   alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
   *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
   *-freebsd[1-2]*) OUT="FreeBSD" ;;
   *86*-*-netbsd) OUT="NetBSD-x86" ;;
@@ -696,9 +698,11 @@ EOF
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
-	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+	     echo "         If you wish to build 32-bit library, the you have to"
+	     echo "         invoke './Configure hpux-ia32-cc' *manually*."
 	     if [ "$TEST" = "false" ]; then
+		echo "         You have about 5 seconds to press Ctrl-C to abort."
 		(stty -icanon min 0 time 50; read waste) < /dev/tty
 	     fi
 	     OUT="hpux64-ia64-cc"

crypto/openssl/crypto/aes/aes_core.c

@@ -750,7 +750,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[2] = GETU32(userKey +  8);
 	rk[3] = GETU32(userKey + 12);
 	if (bits == 128) {
-		for (;;) {
+		while (1) {
 			temp  = rk[3];
 			rk[4] = rk[0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -770,7 +770,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[4] = GETU32(userKey + 16);
 	rk[5] = GETU32(userKey + 20);
 	if (bits == 192) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 5];
 			rk[ 6] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^
@@ -792,7 +792,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 	rk[6] = GETU32(userKey + 24);
 	rk[7] = GETU32(userKey + 28);
 	if (bits == 256) {
-		for (;;) {
+		while (1) {
 			temp = rk[ 7];
 			rk[ 8] = rk[ 0] ^
 				(Te4[(temp >> 16) & 0xff] & 0xff000000) ^

crypto/openssl/crypto/asn1/a_time.c

@@ -105,7 +105,10 @@ ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t)
 
 	ts=OPENSSL_gmtime(&t,&data);
 	if (ts == NULL)
+		{
+		ASN1err(ASN1_F_ASN1_TIME_SET, ASN1_R_ERROR_GETTING_TIME);
 		return NULL;
+		}
 	if((ts->tm_year >= 50) && (ts->tm_year < 150))
 					return ASN1_UTCTIME_set(s, t);
 	return ASN1_GENERALIZEDTIME_set(s,t);
@@ -152,7 +155,7 @@ ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZE
 	if (t->data[0] >= '5') strcpy(str, "19");
 	else strcpy(str, "20");
 
-	BUF_strlcat(str, (char *)t->data, t->length+2);
+	BUF_strlcat(str, (char *)t->data, t->length+3);	/* Include space for a '\0' */
 
 	return ret;
 	}

crypto/openssl/crypto/asn1/asn1.h

@@ -980,6 +980,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_ASN1_TEMPLATE_D2I			 131
 #define ASN1_F_ASN1_TEMPLATE_EX_D2I			 132
 #define ASN1_F_ASN1_TEMPLATE_NEW			 133
+#define ASN1_F_ASN1_TIME_SET				 175
 #define ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING		 134
 #define ASN1_F_ASN1_TYPE_GET_OCTETSTRING		 135
 #define ASN1_F_ASN1_UNPACK_STRING			 136
@@ -1037,6 +1038,7 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_R_DECODE_ERROR				 110
 #define ASN1_R_DECODING_ERROR				 111
 #define ASN1_R_ENCODE_ERROR				 112
+#define ASN1_R_ERROR_GETTING_TIME			 173
 #define ASN1_R_ERROR_LOADING_SECTION			 172
 #define ASN1_R_ERROR_PARSING_SET_ELEMENT		 113
 #define ASN1_R_ERROR_SETTING_CIPHER_PARAMS		 114

crypto/openssl/crypto/asn1/asn1_err.c

@@ -1,6 +1,6 @@
 /* crypto/asn1/asn1_err.c */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -100,6 +100,7 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_D2I,0),	"ASN1_TEMPLATE_D2I"},
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_EX_D2I,0),	"ASN1_TEMPLATE_EX_D2I"},
 {ERR_PACK(0,ASN1_F_ASN1_TEMPLATE_NEW,0),	"ASN1_TEMPLATE_NEW"},
+{ERR_PACK(0,ASN1_F_ASN1_TIME_SET,0),	"ASN1_TIME_set"},
 {ERR_PACK(0,ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING,0),	"ASN1_TYPE_get_int_octetstring"},
 {ERR_PACK(0,ASN1_F_ASN1_TYPE_GET_OCTETSTRING,0),	"ASN1_TYPE_get_octetstring"},
 {ERR_PACK(0,ASN1_F_ASN1_UNPACK_STRING,0),	"ASN1_unpack_string"},
@@ -160,6 +161,7 @@ static ERR_STRING_DATA ASN1_str_reasons[]=
 {ASN1_R_DECODE_ERROR                     ,"decode error"},
 {ASN1_R_DECODING_ERROR                   ,"decoding error"},
 {ASN1_R_ENCODE_ERROR                     ,"encode error"},
+{ASN1_R_ERROR_GETTING_TIME               ,"error getting time"},
 {ASN1_R_ERROR_LOADING_SECTION            ,"error loading section"},
 {ASN1_R_ERROR_PARSING_SET_ELEMENT        ,"error parsing set element"},
 {ASN1_R_ERROR_SETTING_CIPHER_PARAMS      ,"error setting cipher params"},

crypto/openssl/crypto/bf/Makefile.ssl

@@ -49,14 +49,8 @@ lib:	$(LIBOBJ)
 	@touch lib
 
 # elf
-asm/bx86-elf.o: asm/bx86unix.cpp
-	$(CPP) -DELF -x c asm/bx86unix.cpp | as -o asm/bx86-elf.o
-
-# solaris
-asm/bx86-sol.o: asm/bx86unix.cpp
-	$(CC) -E -DSOL asm/bx86unix.cpp | sed 's/^#.*//' > asm/bx86-sol.s
-	as -o asm/bx86-sol.o asm/bx86-sol.s
-	rm -f asm/bx86-sol.s
+asm/bx86-elf.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) bf-586.pl elf $(CFLAGS) $(PROCESSOR) > bx86-elf.s)
 
 # a.out
 asm/bx86-out.o: asm/bx86unix.cpp
@@ -103,7 +97,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)
 
 clean:
-	rm -f asm/bx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/bx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 

crypto/openssl/crypto/bio/b_sock.c

@@ -492,7 +492,7 @@ void BIO_sock_cleanup(void)
 
 #if !defined(OPENSSL_SYS_VMS) || __VMS_VER >= 70000000
 
-int BIO_socket_ioctl(int fd, long type, unsigned long *arg)
+int BIO_socket_ioctl(int fd, long type, void *arg)
 	{
 	int i;
 
@@ -742,7 +742,7 @@ int BIO_set_tcp_ndelay(int s, int on)
 int BIO_socket_nbio(int s, int mode)
 	{
 	int ret= -1;
-	unsigned long l;
+	int l;
 
 	l=mode;
 #ifdef FIONBIO

crypto/openssl/crypto/bio/bio.h

@@ -244,7 +244,7 @@ typedef struct bio_method_st
 	long (_far *ctrl)();
 	int (_far *create)();
 	int (_far *destroy)();
-	long (_fat *callback_ctrl)();
+	long (_far *callback_ctrl)();
 	} BIO_METHOD;
 #endif
 
@@ -585,7 +585,7 @@ struct hostent *BIO_gethostbyname(const char *name);
  * and an appropriate error code is set).
  */
 int BIO_sock_error(int sock);
-int BIO_socket_ioctl(int fd, long type, unsigned long *arg);
+int BIO_socket_ioctl(int fd, long type, void *arg);
 int BIO_socket_nbio(int fd,int mode);
 int BIO_get_port(const char *str, unsigned short *port_ptr);
 int BIO_get_host_ip(const char *str, unsigned char *ip);

crypto/openssl/crypto/bio/bio_lib.c

@@ -395,6 +395,8 @@ BIO *BIO_pop(BIO *b)
 	if (b == NULL) return(NULL);
 	ret=b->next_bio;
 
+	BIO_ctrl(b,BIO_CTRL_POP,0,NULL);
+
 	if (b->prev_bio != NULL)
 		b->prev_bio->next_bio=b->next_bio;
 	if (b->next_bio != NULL)
@@ -402,7 +404,6 @@ BIO *BIO_pop(BIO *b)
 
 	b->next_bio=NULL;
 	b->prev_bio=NULL;
-	BIO_ctrl(b,BIO_CTRL_POP,0,NULL);
 	return(ret);
 	}
 

crypto/openssl/crypto/bn/Makefile.ssl

@@ -23,14 +23,6 @@ BN_ASM=		bn_asm.o
 
 CFLAGS= $(INCLUDES) $(CFLAG)
 
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAGS=$(CFLAGS)
-
 GENERAL=Makefile
 TEST=bntest.c exptest.c
 APPS=
@@ -73,22 +65,11 @@ lib:	$(LIBOBJ)
 	@touch lib
 
 # elf
-asm/bn86-elf.o: asm/bn86unix.cpp
-	$(CPP) -DELF -x c asm/bn86unix.cpp | as -o asm/bn86-elf.o
+asm/bn86-elf.s:	asm/bn-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) bn-586.pl elf $(CFLAGS) > bn86-elf.s)
 
-asm/co86-elf.o: asm/co86unix.cpp
-	$(CPP) -DELF -x c asm/co86unix.cpp | as -o asm/co86-elf.o
-
-# solaris
-asm/bn86-sol.o: asm/bn86unix.cpp
-	$(CC) -E -DSOL asm/bn86unix.cpp | sed 's/^#.*//' > asm/bn86-sol.s
-	as -o asm/bn86-sol.o asm/bn86-sol.s
-	rm -f asm/bn86-sol.s
-
-asm/co86-sol.o: asm/co86unix.cpp
-	$(CC) -E -DSOL asm/co86unix.cpp | sed 's/^#.*//' > asm/co86-sol.s
-	as -o asm/co86-sol.o asm/co86-sol.s
-	rm -f asm/co86-sol.s
+asm/co86-elf.s:	asm/co-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) co-586.pl elf $(CFLAGS) > co86-elf.s)
 
 # a.out
 asm/bn86-out.o: asm/bn86unix.cpp
@@ -178,7 +159,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)
 
 clean:
-	rm -f asm/co86unix.cpp asm/bn86unix.cpp *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff bn_asm.s
+	rm -f asm/co86unix.cpp asm/bn86unix.cpp asm/*-elf.* *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff bn_asm.s
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 

crypto/openssl/crypto/bn/asm/ia64.S

@@ -1,6 +1,6 @@
 .explicit
 .text
-.ident	"ia64.S, Version 1.1"
+.ident	"ia64.S, Version 2.0"
 .ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
 
 //
@@ -13,6 +13,35 @@
 // disclaimed.
 // ====================================================================
 //
+// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is
+// different from Itanium to this module viewpoint. Most notably, is it
+// "wider" than Itanium? Can you experience loop scalability as
+// discussed in commentary sections? Not really:-( Itanium2 has 6
+// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to
+// spin twice as fast, as I need 8 IALU ports. Amount of floating point
+// ports is the same, i.e. 2, while I need 4. In other words, to this
+// module Itanium2 remains effectively as "wide" as Itanium. Yet it's
+// essentially different in respect to this module, and a re-tune was
+// required. Well, because some intruction latencies has changed. Most
+// noticeably those intensively used:
+//
+//			Itanium	Itanium2
+//	ldf8		9	6		L2 hit
+//	ld8		2	1		L1 hit
+//	getf		2	5
+//	xma[->getf]	7[+1]	4[+0]
+//	add[->st8]	1[+1]	1[+0]
+//
+// What does it mean? You might ratiocinate that the original code
+// should run just faster... Because sum of latencies is smaller...
+// Wrong! Note that getf latency increased. This means that if a loop is
+// scheduled for lower latency (and they are), then it will suffer from
+// stall condition and the code will therefore turn anti-scalable, e.g.
+// original bn_mul_words spun at 5*n or 2.5 times slower than expected
+// on Itanium2! What to do? Reschedule loops for Itanium2? But then
+// Itanium would exhibit anti-scalability. So I've chosen to reschedule
+// for worst latency for every instruction aiming for best *all-round*
+// performance.  
 
 // Q.	How much faster does it get?
 // A.	Here is the output from 'openssl speed rsa dsa' for vanilla
@@ -149,12 +178,27 @@ bn_add_words:
 	brp.loop.imp	.L_bn_add_words_ctop,.L_bn_add_words_cend-16
 					}
 	.body
-{ .mib;	mov		r14=r32			// rp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32		// rp
+#else
+	mov		r14=r32			// rp
+#endif
 	mov		r9=pr		};;
-{ .mii;	mov		r15=r33			// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r15=0,r33		// ap
+#else
+	mov		r15=r33			// ap
+#endif
 	mov		ar.lc=r10
 	mov		ar.ec=6		}
-{ .mib;	mov		r16=r34			// bp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r16=0,r34		// bp
+#else
+	mov		r16=r34			// bp
+#endif
 	mov		pr.rot=1<<16	};;
 
 .L_bn_add_words_ctop:
@@ -174,7 +218,7 @@ bn_add_words:
 
 { .mii;
 (p59)	add		r8=1,r8		// return value
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mbb;	nop.b		0x0
 	br.ret.sptk.many	b0	};;
@@ -202,12 +246,27 @@ bn_sub_words:
 	brp.loop.imp	.L_bn_sub_words_ctop,.L_bn_sub_words_cend-16
 					}
 	.body
-{ .mib;	mov		r14=r32			// rp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32		// rp
+#else
+	mov		r14=r32			// rp
+#endif
 	mov		r9=pr		};;
-{ .mii;	mov		r15=r33			// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r15=0,r33		// ap
+#else
+	mov		r15=r33			// ap
+#endif
 	mov		ar.lc=r10
 	mov		ar.ec=6		}
-{ .mib;	mov		r16=r34			// bp
+{ .mib;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r16=0,r34		// bp
+#else
+	mov		r16=r34			// bp
+#endif
 	mov		pr.rot=1<<16	};;
 
 .L_bn_sub_words_ctop:
@@ -227,7 +286,7 @@ bn_sub_words:
 
 { .mii;
 (p59)	add		r8=1,r8		// return value
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mbb;	nop.b		0x0
 	br.ret.sptk.many	b0	};;
@@ -253,7 +312,7 @@ bn_mul_words:
 #ifdef XMA_TEMPTATION
 { .mfi;	alloc		r2=ar.pfs,4,0,0,0	};;
 #else
-{ .mfi;	alloc		r2=ar.pfs,4,4,0,8	};;
+{ .mfi;	alloc		r2=ar.pfs,4,12,0,16	};;
 #endif
 { .mib;	mov		r8=r0			// return value
 	cmp4.le		p6,p0=r34,r0
@@ -266,24 +325,30 @@ bn_mul_words:
 
 	.body
 { .mib;	setf.sig	f8=r35	// w
-	mov		pr.rot=0x400001<<16
-			// ------^----- serves as (p48) at first (p26)
+	mov		pr.rot=0x800001<<16
+			// ------^----- serves as (p50) at first (p27)
 	brp.loop.imp	.L_bn_mul_words_ctop,.L_bn_mul_words_cend-16
 					}
 
 #ifndef XMA_TEMPTATION
 
-{ .mii;	mov		r14=r32	// rp
-	mov		r15=r33	// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32	// rp
+	addp4		r15=0,r33	// ap
+#else
+	mov		r14=r32		// rp
+	mov		r15=r33		// ap
+#endif
 	mov		ar.lc=r10	}
-{ .mii;	mov		r39=0	// serves as r33 at first (p26)
-	mov		ar.ec=12	};;
+{ .mii;	mov		r40=0	// serves as r35 at first (p27)
+	mov		ar.ec=13	};;
 
-// This loop spins in 2*(n+11) ticks. It's scheduled for data in L2
-// cache (i.e. 9 ticks away) as floating point load/store instructions
+// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium
+// L2 cache (i.e. 9 ticks away) as floating point load/store instructions
 // bypass L1 cache and L2 latency is actually best-case scenario for
-// ldf8. The loop is not scalable and shall run in 2*(n+11) even on
-// "wider" IA-64 implementations. It's a trade-off here. n+22 loop
+// ldf8. The loop is not scalable and shall run in 2*(n+12) even on
+// "wider" IA-64 implementations. It's a trade-off here. n+24 loop
 // would give us ~5% in *overall* performance improvement on "wider"
 // IA-64, but would hurt Itanium for about same because of longer
 // epilogue. As it's a matter of few percents in either case I've
@@ -291,25 +356,25 @@ bn_mul_words:
 // this very instruction sequence in bn_mul_add_words loop which in
 // turn is scalable).
 .L_bn_mul_words_ctop:
-{ .mfi;	(p25)	getf.sig	r36=f49			// low
-	(p21)	xmpy.lu		f45=f37,f8
-	(p27)	cmp.ltu		p52,p48=r39,r38	}
+{ .mfi;	(p25)	getf.sig	r36=f52			// low
+	(p21)	xmpy.lu		f48=f37,f8
+	(p28)	cmp.ltu		p54,p50=r41,r39	}
 { .mfi;	(p16)	ldf8		f32=[r15],8
-	(p21)	xmpy.hu		f38=f37,f8
+	(p21)	xmpy.hu		f40=f37,f8
 	(p0)	nop.i		0x0		};;
-{ .mii;	(p26)	getf.sig	r32=f43			// high
-	.pred.rel	"mutex",p48,p52
-	(p48)	add		r38=r37,r33		// (p26)
-	(p52)	add		r38=r37,r33,1	}	// (p26)
-{ .mfb;	(p27)	st8		[r14]=r39,8
+{ .mii;	(p25)	getf.sig	r32=f44			// high
+	.pred.rel	"mutex",p50,p54
+	(p50)	add		r40=r38,r35		// (p27)
+	(p54)	add		r40=r38,r35,1	}	// (p27)
+{ .mfb;	(p28)	st8		[r14]=r41,8
 	(p0)	nop.f		0x0
 	br.ctop.sptk	.L_bn_mul_words_ctop	};;
 .L_bn_mul_words_cend:
 
 { .mii;	nop.m		0x0
-.pred.rel	"mutex",p49,p53
-(p49)	add		r8=r34,r0
-(p53)	add		r8=r34,r0,1	}
+.pred.rel	"mutex",p51,p55
+(p51)	add		r8=r36,r0
+(p55)	add		r8=r36,r0,1	}
 { .mfb;	nop.m	0x0
 	nop.f	0x0
 	nop.b	0x0			}
@@ -344,7 +409,7 @@ bn_mul_words:
 #endif	// XMA_TEMPTATION
 
 { .mii;	nop.m		0x0
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -376,59 +441,69 @@ bn_mul_add_words:
 
 	.body
 { .mib;	setf.sig	f8=r35	// w
-	mov		pr.rot=0x400001<<16
-			// ------^----- serves as (p48) at first (p26)
+	mov		pr.rot=0x800001<<16
+			// ------^----- serves as (p50) at first (p27)
 	brp.loop.imp	.L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16
 					}
-{ .mii;	mov		r14=r32	// rp
-	mov		r15=r33	// ap
+{ .mii;
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r14=0,r32	// rp
+	addp4		r15=0,r33	// ap
+#else
+	mov		r14=r32		// rp
+	mov		r15=r33		// ap
+#endif
 	mov		ar.lc=r10	}
-{ .mii;	mov		r39=0	// serves as r33 at first (p26)
-	mov		r18=r32	// rp copy
-	mov		ar.ec=14	};;
+{ .mii;	mov		r40=0	// serves as r35 at first (p27)
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+	addp4		r18=0,r32	// rp copy
+#else
+	mov		r18=r32		// rp copy
+#endif
+	mov		ar.ec=15	};;
 
-// This loop spins in 3*(n+13) ticks on Itanium and should spin in
-// 2*(n+13) on "wider" IA-64 implementations (to be verified with new
+// This loop spins in 3*(n+14) ticks on Itanium and should spin in
+// 2*(n+14) on "wider" IA-64 implementations (to be verified with new
 // µ-architecture manuals as they become available). As usual it's
 // possible to compress the epilogue, down to 10 in this case, at the
 // cost of scalability. Compressed (and therefore non-scalable) loop
-// running at 3*(n+10) would buy you ~10% on Itanium but take ~35%
+// running at 3*(n+11) would buy you ~10% on Itanium but take ~35%
 // from "wider" IA-64 so let it be scalable! Special attention was
 // paid for having the loop body split at 64-byte boundary. ld8 is
 // scheduled for L1 cache as the data is more than likely there.
 // Indeed, bn_mul_words has put it there a moment ago:-)
 .L_bn_mul_add_words_ctop:
-{ .mfi;	(p25)	getf.sig	r36=f49			// low
-	(p21)	xmpy.lu		f45=f37,f8
-	(p27)	cmp.ltu		p52,p48=r39,r38	}
+{ .mfi;	(p25)	getf.sig	r36=f52			// low
+	(p21)	xmpy.lu		f48=f37,f8
+	(p28)	cmp.ltu		p54,p50=r41,r39	}
 { .mfi;	(p16)	ldf8		f32=[r15],8
-	(p21)	xmpy.hu		f38=f37,f8
-	(p27)	add		r43=r43,r39	};;
-{ .mii;	(p26)	getf.sig	r32=f43			// high
-	.pred.rel	"mutex",p48,p52
-	(p48)	add		r38=r37,r33		// (p26)
-	(p52)	add		r38=r37,r33,1	}	// (p26)
-{ .mfb;	(p27)	cmp.ltu.unc	p56,p0=r43,r39
+	(p21)	xmpy.hu		f40=f37,f8
+	(p28)	add		r45=r45,r41	};;
+{ .mii;	(p25)	getf.sig	r32=f44			// high
+	.pred.rel	"mutex",p50,p54
+	(p50)	add		r40=r38,r35		// (p27)
+	(p54)	add		r40=r38,r35,1	}	// (p27)
+{ .mfb;	(p28)	cmp.ltu.unc	p60,p0=r45,r41
 	(p0)	nop.f		0x0
 	(p0)	nop.b		0x0		}
-{ .mii;	(p26)	ld8		r42=[r18],8
-	(p58)	cmp.eq.or	p57,p0=-1,r44
-	(p58)	add		r44=1,r44	}
-{ .mfb;	(p29)	st8		[r14]=r45,8
+{ .mii;	(p27)	ld8		r44=[r18],8
+	(p62)	cmp.eq.or	p61,p0=-1,r46
+	(p62)	add		r46=1,r46	}
+{ .mfb;	(p30)	st8		[r14]=r47,8
 	(p0)	nop.f		0x0
 	br.ctop.sptk	.L_bn_mul_add_words_ctop};;
 .L_bn_mul_add_words_cend:
 
 { .mii;	nop.m		0x0
-.pred.rel	"mutex",p51,p55
-(p51)	add		r8=r36,r0
-(p55)	add		r8=r36,r0,1	}
+.pred.rel	"mutex",p53,p57
+(p53)	add		r8=r38,r0
+(p57)	add		r8=r38,r0,1	}
 { .mfb;	nop.m	0x0
 	nop.f	0x0
 	nop.b	0x0			};;
 { .mii;
-(p59)	add		r8=1,r8
-	mov		pr=r9,-1
+(p63)	add		r8=1,r8
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -461,6 +536,10 @@ bn_sqr_words:
 	mov	r9=pr			};;
 
 	.body
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii; addp4		r32=0,r32
+	addp4		r33=0,r33	};;
+#endif
 { .mib;
 	mov		pr.rot=1<<16
 	brp.loop.imp	.L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16
@@ -492,7 +571,7 @@ bn_sqr_words:
 .L_bn_sqr_words_cend:
 
 { .mii;	nop.m		0x0
-	mov		pr=r9,-1
+	mov		pr=r9,0x1ffff
 	mov		ar.lc=r3	}
 { .mfb;	rum		1<<5		// clear um.mfh
 	nop.f		0x0
@@ -526,7 +605,14 @@ bn_sqr_comba8:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
 { .mii;	alloc	r2=ar.pfs,2,1,0,0
+	addp4	r33=0,r33
+	addp4	r32=0,r32		};;
+{ .mii;
+#else
+{ .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
 	mov	r34=r33
 	add	r14=8,r33		};;
 	.body
@@ -587,7 +673,14 @@ bn_mul_comba8:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
 { .mii;	alloc	r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+#endif
 	add	r14=8,r33
 	add	r17=8,r34		}
 	.body
@@ -1138,7 +1231,14 @@ bn_sqr_comba4:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii;	alloc   r2=ar.pfs,2,1,0,0
+	addp4	r32=0,r32
+	addp4	r33=0,r33		};;
+{ .mii;
+#else
 { .mii;	alloc	r2=ar.pfs,2,1,0,0
+#endif
 	mov	r34=r33
 	add	r14=8,r33		};;
 	.body
@@ -1164,7 +1264,14 @@ bn_mul_comba4:
 	.prologue
 	.fframe	0
 	.save	ar.pfs,r2
+#if defined(_HPUX_SOURCE) && defined(_ILP32)
+{ .mii;	alloc   r2=ar.pfs,3,0,0,0
+	addp4	r33=0,r33
+	addp4	r34=0,r34		};;
+{ .mii;	addp4	r32=0,r32
+#else
 { .mii;	alloc	r2=ar.pfs,3,0,0,0
+#endif
 	add	r14=8,r33
 	add	r17=8,r34		}
 	.body
@@ -1464,7 +1571,7 @@ bn_div_words:
 	or	r8=r8,r33
 	mov	ar.pfs=r2		};;
 { .mii;	shr.u	r9=H,I			// remainder if anybody wants it
-	mov	pr=r10,-1		}
+	mov	pr=r10,0x1ffff		}
 { .mfb;	br.ret.sptk.many	b0	};;
 
 // Unsigned 64 by 32 (well, by 64 for the moment) bit integer division

crypto/openssl/crypto/bn/asm/pa-risc2.s

@@ -747,8 +747,8 @@ bn_div_words
 	.PROC
 	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR,LONG_RETURN
 	.IMPORT	BN_num_bits_word,CODE
-	.IMPORT	__iob,DATA
-	.IMPORT	fprintf,CODE
+	;--- not PIC	.IMPORT	__iob,DATA
+	;--- not PIC	.IMPORT	fprintf,CODE
 	.IMPORT	abort,CODE
 	.IMPORT	$$div2U,MILLICODE
 	.CALLINFO CALLER,FRAME=144,ENTRY_GR=%r9,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
@@ -844,12 +844,12 @@ $0006001A
         MOVIB,TR        2,%r8,$0006001C ;offset 0xa18
         EXTRD,U %r3,63,32,%r7   ;offset 0xa1c
 $D2
-        ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
-        LDIL    LR'C$7,%r21     ;offset 0xa24
-        LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
-        .CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
-        B,L     fprintf,%r2     ;offset 0xa2c
-        LDO     RR'C$7(%r21),%r25       ;offset 0xa30
+        ;--- not PIC	ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
+        ;--- not PIC	LDIL    LR'C$7,%r21     ;offset 0xa24
+        ;--- not PIC	LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
+        ;--- not PIC	.CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
+        ;--- not PIC	B,L     fprintf,%r2     ;offset 0xa2c
+        ;--- not PIC	LDO     RR'C$7(%r21),%r25       ;offset 0xa30
         .CALL           ;
         B,L     abort,%r2       ;offset 0xa34
         NOP             ;offset 0xa38
@@ -1605,14 +1605,14 @@ bn_mul_comba4
 	.PROCEND	
 
 
-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SPACE	$PRIVATE$,SORT=16
-	.IMPORT	$global$,DATA
-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SUBSPA	$LIT$,ACCESS=0x2c
-C$7
-	.ALIGN	8
-	.STRINGZ	"Division would overflow (%d)\n"
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SPACE	$PRIVATE$,SORT=16
+;--- not PIC	.IMPORT	$global$,DATA
+;--- not PIC	.SPACE	$TEXT$
+;--- not PIC	.SUBSPA	$CODE$
+;--- not PIC	.SUBSPA	$LIT$,ACCESS=0x2c
+;--- not PIC	C$7
+;--- not PIC	.ALIGN	8
+;--- not PIC	.STRINGZ	"Division would overflow (%d)\n"
 	.END

crypto/openssl/crypto/bn/bn_lcl.h

@@ -446,10 +446,6 @@ void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
 	BN_ULONG *t);
 void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
 	BN_ULONG *t);
-BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
-BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
 
 #ifdef  __cplusplus
 }

crypto/openssl/crypto/bn/bn_prime.c

@@ -140,6 +140,7 @@ BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
 	BN_CTX *ctx;
 	int checks = BN_prime_checks_for_size(bits);
 
+	BN_init(&t);
 	ctx=BN_CTX_new();
 	if (ctx == NULL) goto err;
 	if (ret == NULL)
@@ -148,7 +149,6 @@ BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
 		}
 	else
 		rnd=ret;
-	BN_init(&t);
 loop: 
 	/* make a random number and set the top and bottom bits */
 	if (add == NULL)

crypto/openssl/crypto/cast/Makefile.ssl

@@ -52,14 +52,8 @@ lib:	$(LIBOBJ)
 	@touch lib
 
 # elf
-asm/cx86-elf.o: asm/cx86unix.cpp
-	$(CPP) -DELF -x c asm/cx86unix.cpp | as -o asm/cx86-elf.o
-
-# solaris
-asm/cx86-sol.o: asm/cx86unix.cpp
-	$(CC) -E -DSOL asm/cx86unix.cpp | sed 's/^#.*//' > asm/cx86-sol.s
-	as -o asm/cx86-sol.o asm/cx86-sol.s
-	rm -f asm/cx86-sol.s
+asm/cx86-elf.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) cast-586.pl elf $(CLAGS) $(PROCESSOR) > cx86-elf.s)
 
 # a.out
 asm/cx86-out.o: asm/cx86unix.cpp
@@ -104,7 +98,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)
 
 clean:
-	rm -f asm/cx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/cx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 

crypto/openssl/crypto/conf/conf_mall.c

@@ -63,7 +63,9 @@
 #include <openssl/dso.h>
 #include <openssl/x509.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 /* Load all OpenSSL builtin modules */
 
@@ -71,6 +73,8 @@ void OPENSSL_load_builtin_modules(void)
 	{
 	/* Add builtin modules here */
 	ASN1_add_oid_module();
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE_add_conf_module();
+#endif
 	}
 

crypto/openssl/crypto/conf/conf_sap.c

@@ -63,7 +63,9 @@
 #include <openssl/dso.h>
 #include <openssl/x509.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 /* This is the automatic configuration loader: it is called automatically by
  * OpenSSL when any of a number of standard initialisation functions are called,
@@ -78,8 +80,10 @@ void OPENSSL_config(const char *config_name)
 		return;
 
 	OPENSSL_load_builtin_modules();
+#ifndef OPENSSL_NO_ENGINE
 	/* Need to load ENGINEs */
 	ENGINE_load_builtin_engines();
+#endif
 	/* Add others here? */
 
 

crypto/openssl/crypto/des/Makefile.ssl

@@ -66,30 +66,11 @@ des: des.o cbc3_enc.o lib
 	$(CC) $(CFLAGS) -o des des.o cbc3_enc.o $(LIB)
 
 # elf
-asm/dx86-elf.o: asm/dx86unix.cpp
-	$(CPP) -DELF	\
-		`(echo $(CFLAGS) | egrep -ie '-[fK]PIC') > /dev/null 2>&1 && echo -DPIC; exit 0`\
-		-x c asm/dx86unix.cpp | as -o asm/dx86-elf.o
+asm/dx86-elf.s:	asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) des-586.pl elf $(CFLAGS) > dx86-elf.s)
 
-asm/yx86-elf.o: asm/yx86unix.cpp
-	$(CPP) -DELF	\
-		`(echo $(CFLAGS) | egrep -ie '-[fK]PIC') > /dev/null 2>&1 && echo -DPIC; exit 0`\
-		-x c asm/yx86unix.cpp | as -o asm/yx86-elf.o
-
-# solaris
-asm/dx86-sol.o: asm/dx86unix.cpp
-	$(CC) -E -DSOL	\
-		`(echo $(CFLAGS) | egrep -ie '-[fK]PIC') > /dev/null 2>&1 && echo -DPIC; exit 0`\
-		asm/dx86unix.cpp | sed 's/^#.*//' > asm/dx86-sol.s
-	as -o asm/dx86-sol.o asm/dx86-sol.s
-	rm -f asm/dx86-sol.s
-
-asm/yx86-sol.o: asm/yx86unix.cpp
-	$(CC) -E -DSOL	\
-		`(echo $(CFLAGS) | egrep -ie '-[fK]PIC') > /dev/null 2>&1 && echo -DPIC; exit 0`\
-		asm/yx86unix.cpp | sed 's/^#.*//' > asm/yx86-sol.s
-	as -o asm/yx86-sol.o asm/yx86-sol.s
-	rm -f asm/yx86-sol.s
+asm/yx86-elf.s:	asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
+	(cd asm; $(PERL) crypt586.pl elf $(CFLAGS) > yx86-elf.s)
 
 # a.out
 asm/dx86-out.o: asm/dx86unix.cpp
@@ -145,7 +126,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)
 
 clean:
-	rm -f asm/dx86unix.cpp asm/yx86unix.cpp *.o asm/*.o *.obj des lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/dx86unix.cpp asm/yx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj des lib tags core .pure .nfs* *.old *.bak fluff
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 

crypto/openssl/crypto/des/asm/crypt586.pl

@@ -32,8 +32,9 @@ sub fcrypt_body
 	&xor(	$R,	$R);
 
 	# PIC-ification:-)
-	if ($cpp)	{ &picmeup("edx","DES_SPtrans");   }
-	else		{ &lea("edx",&DWP("DES_SPtrans")); }
+	&picmeup("edx","DES_SPtrans");
+	#if ($cpp)	{ &picmeup("edx","DES_SPtrans");   }
+	#else		{ &lea("edx",&DWP("DES_SPtrans")); }
 	&push("edx");	# becomes &swtmp(1)
 	#
 	&mov($trans,&wparam(1)); # reloaded with DES_SPtrans in D_ENCRYPT

crypto/openssl/crypto/des/asm/des-586.pl

@@ -73,8 +73,9 @@ sub DES_encrypt
 		}
 
 	# PIC-ification:-)
-	if ($cpp)	{ &picmeup($trans,"DES_SPtrans");   }
-	else		{ &lea($trans,&DWP("DES_SPtrans")); }
+	&picmeup($trans,"DES_SPtrans");
+	#if ($cpp)	{ &picmeup($trans,"DES_SPtrans");   }
+	#else		{ &lea($trans,&DWP("DES_SPtrans")); }
 
 	&mov(	"ecx",	&wparam(1)	);
 	&cmp("ebx","0");

crypto/openssl/crypto/des/cbc_cksm.c

@@ -93,5 +93,14 @@ DES_LONG DES_cbc_cksum(const unsigned char *in, DES_cblock *output,
 		l2c(tout1,out);
 		}
 	tout0=tin0=tin1=tin[0]=tin[1]=0;
+	/*
+	  Transform the data in tout1 so that it will
+	  match the return value that the MIT Kerberos
+	  mit_des_cbc_cksum API returns.
+	*/
+	tout1 = ((tout1 >> 24L) & 0x000000FF)
+	      | ((tout1 >> 8L)  & 0x0000FF00)
+	      | ((tout1 << 8L)  & 0x00FF0000)
+	      | ((tout1 << 24L) & 0xFF000000);
 	return(tout1);
 	}

crypto/openssl/crypto/des/des_locl.h

@@ -162,7 +162,7 @@
 
 #if defined(OPENSSL_SYS_WIN32) && defined(_MSC_VER)
 #define	ROTATE(a,n)	(_lrotr(a,n))
-#elif defined(__GNUC__) && __GNUC__>=2 && !defined(__STRICT_ANSI__) && !defined(NO_ASM) && !defined(NO_INLINE_ASM)
+#elif defined(__GNUC__) && __GNUC__>=2 && !defined(__STRICT_ANSI__) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
 # if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
 #  define ROTATE(a,n)	({ register unsigned int ret;	\
 				asm ("rorl %1,%0"	\

crypto/openssl/crypto/des/destest.c

@@ -320,7 +320,11 @@ static unsigned char ofb_cipher[24]=
 	0x3d,0x6d,0x5b,0xe3,0x25,0x5a,0xf8,0xc3
 	};
 
+#if 0
 static DES_LONG cbc_cksum_ret=0xB462FEF7L;
+#else
+static DES_LONG cbc_cksum_ret=0xF7FE62B4L;
+#endif
 static unsigned char cbc_cksum_data[8]={0x1D,0x26,0x93,0x97,0xf7,0xfe,0x62,0xb4};
 
 static char *pt(unsigned char *p);

crypto/openssl/crypto/dh/dh_key.c

@@ -61,7 +61,9 @@
 #include <openssl/bn.h>
 #include <openssl/rand.h>
 #include <openssl/dh.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 static int generate_key(DH *dh);
 static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh);

crypto/openssl/crypto/dh/dh_lib.c

@@ -60,7 +60,9 @@
 #include "cryptlib.h"
 #include <openssl/bn.h>
 #include <openssl/dh.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 const char *DH_version="Diffie-Hellman" OPENSSL_VERSION_PTEXT;
 
@@ -85,11 +87,13 @@ int DH_set_method(DH *dh, const DH_METHOD *meth)
         const DH_METHOD *mtmp;
         mtmp = dh->meth;
         if (mtmp->finish) mtmp->finish(dh);
+#ifndef OPENSSL_NO_ENGINE
 	if (dh->engine)
 		{
 		ENGINE_finish(dh->engine);
 		dh->engine = NULL;
 		}
+#endif
         dh->meth = meth;
         if (meth->init) meth->init(dh);
         return 1;
@@ -112,6 +116,7 @@ DH *DH_new_method(ENGINE *engine)
 		}
 
 	ret->meth = DH_get_default_method();
+#ifndef OPENSSL_NO_ENGINE
 	if (engine)
 		{
 		if (!ENGINE_init(engine))
@@ -135,6 +140,7 @@ DH *DH_new_method(ENGINE *engine)
 			return NULL;
 			}
 		}
+#endif
 
 	ret->pad=0;
 	ret->version=0;
@@ -154,8 +160,10 @@ DH *DH_new_method(ENGINE *engine)
 	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
 	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
+#ifndef OPENSSL_NO_ENGINE
 		if (ret->engine)
 			ENGINE_finish(ret->engine);
+#endif
 		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
 		OPENSSL_free(ret);
 		ret=NULL;
@@ -182,8 +190,10 @@ void DH_free(DH *r)
 
 	if (r->meth->finish)
 		r->meth->finish(r);
+#ifndef OPENSSL_NO_ENGINE
 	if (r->engine)
 		ENGINE_finish(r->engine);
+#endif
 
 	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, r, &r->ex_data);
 

crypto/openssl/crypto/dsa/dsa_lib.c

@@ -63,7 +63,9 @@
 #include <openssl/bn.h>
 #include <openssl/dsa.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 const char *DSA_version="DSA" OPENSSL_VERSION_PTEXT;
 
@@ -93,11 +95,13 @@ int DSA_set_method(DSA *dsa, const DSA_METHOD *meth)
         const DSA_METHOD *mtmp;
         mtmp = dsa->meth;
         if (mtmp->finish) mtmp->finish(dsa);
+#ifndef OPENSSL_NO_ENGINE
 	if (dsa->engine)
 		{
 		ENGINE_finish(dsa->engine);
 		dsa->engine = NULL;
 		}
+#endif
         dsa->meth = meth;
         if (meth->init) meth->init(dsa);
         return 1;
@@ -114,6 +118,7 @@ DSA *DSA_new_method(ENGINE *engine)
 		return(NULL);
 		}
 	ret->meth = DSA_get_default_method();
+#ifndef OPENSSL_NO_ENGINE
 	if (engine)
 		{
 		if (!ENGINE_init(engine))
@@ -138,6 +143,7 @@ DSA *DSA_new_method(ENGINE *engine)
 			return NULL;
 			}
 		}
+#endif
 
 	ret->pad=0;
 	ret->version=0;
@@ -158,8 +164,10 @@ DSA *DSA_new_method(ENGINE *engine)
 	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
 	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
 		{
+#ifndef OPENSSL_NO_ENGINE
 		if (ret->engine)
 			ENGINE_finish(ret->engine);
+#endif
 		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
 		OPENSSL_free(ret);
 		ret=NULL;
@@ -189,8 +197,10 @@ void DSA_free(DSA *r)
 
 	if(r->meth->finish)
 		r->meth->finish(r);
+#ifndef OPENSSL_NO_ENGINE
 	if(r->engine)
 		ENGINE_finish(r->engine);
+#endif
 
 	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, r, &r->ex_data);
 

crypto/openssl/crypto/dsa/dsa_ossl.c

@@ -64,7 +64,9 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
 static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp);
@@ -106,13 +108,15 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	int i,reason=ERR_R_BN_LIB;
 	DSA_SIG *ret=NULL;
 
+	BN_init(&m);
+	BN_init(&xr);
+
 	if (!dsa->p || !dsa->q || !dsa->g)
 		{
 		reason=DSA_R_MISSING_PARAMETERS;
 		goto err;
 		}
-	BN_init(&m);
-	BN_init(&xr);
+
 	s=BN_new();
 	if (s == NULL) goto err;
 
@@ -178,6 +182,9 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 		DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
 		return 0;
 		}
+
+	BN_init(&k);
+
 	if (ctx_in == NULL)
 		{
 		if ((ctx=BN_CTX_new()) == NULL) goto err;
@@ -185,7 +192,6 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 	else
 		ctx=ctx_in;
 
-	BN_init(&k);
 	if ((r=BN_new()) == NULL) goto err;
 	kinv=NULL;
 
@@ -241,11 +247,12 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		return -1;
 		}
 
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
 	BN_init(&u1);
 	BN_init(&u2);
 	BN_init(&t1);
 
+	if ((ctx=BN_CTX_new()) == NULL) goto err;
+
 	if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0)
 		{
 		ret = 0;

crypto/openssl/crypto/dsa/dsa_sign.c

@@ -64,7 +64,9 @@
 #include <openssl/dsa.h>
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 DSA_SIG * DSA_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	{

crypto/openssl/crypto/dsa/dsa_vrf.c

@@ -65,7 +65,9 @@
 #include <openssl/rand.h>
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 int DSA_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 		  DSA *dsa)

crypto/openssl/crypto/dsa/dsagen.c

@@ -103,7 +103,7 @@ main()
 		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
 
 	memcpy(seed_buf,seed,20);
-	dsa=DSA_generate_parameters(1024,seed,20,&counter,&h,cb);
+	dsa=DSA_generate_parameters(1024,seed,20,&counter,&h,cb,bio_err);
 
 	if (dsa == NULL)
 		DSA_print(bio_err,dsa,0);

crypto/openssl/crypto/dsa/dsatest.c

@@ -68,7 +68,9 @@
 #include <openssl/rand.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #ifdef OPENSSL_SYS_WINDOWS
 #include "../bio/bss_file.c"
 #endif

crypto/openssl/crypto/dso/dso_dl.c

@@ -126,7 +126,7 @@ static int dl_load(DSO *dso)
 		DSOerr(DSO_F_DL_LOAD,DSO_R_NO_FILENAME);
 		goto err;
 		}
-	ptr = shl_load(filename, BIND_IMMEDIATE|DYNAMIC_PATH, NULL);
+	ptr = shl_load(filename, BIND_IMMEDIATE|DYNAMIC_PATH, 0L);
 	if(ptr == NULL)
 		{
 		DSOerr(DSO_F_DL_LOAD,DSO_R_LOAD_FAILED);

crypto/openssl/crypto/ec/ec.h

@@ -195,7 +195,6 @@ void ERR_load_EC_strings(void);
 #define EC_F_EC_GROUP_GET0_GENERATOR			 139
 #define EC_F_EC_GROUP_GET_COFACTOR			 140
 #define EC_F_EC_GROUP_GET_CURVE_GFP			 130
-#define EC_F_EC_GROUP_GET_EXTRA_DATA			 107
 #define EC_F_EC_GROUP_GET_ORDER				 141
 #define EC_F_EC_GROUP_NEW				 108
 #define EC_F_EC_GROUP_PRECOMPUTE_MULT			 142
@@ -232,7 +231,6 @@ void ERR_load_EC_strings(void);
 #define EC_R_INVALID_FIELD				 103
 #define EC_R_INVALID_FORM				 104
 #define EC_R_NOT_INITIALIZED				 111
-#define EC_R_NO_SUCH_EXTRA_DATA				 105
 #define EC_R_POINT_AT_INFINITY				 106
 #define EC_R_POINT_IS_NOT_ON_CURVE			 107
 #define EC_R_SLOT_FULL					 108

crypto/openssl/crypto/ec/ec_err.c

@@ -84,7 +84,6 @@ static ERR_STRING_DATA EC_str_functs[]=
 {ERR_PACK(0,EC_F_EC_GROUP_GET0_GENERATOR,0),	"EC_GROUP_get0_generator"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_COFACTOR,0),	"EC_GROUP_get_cofactor"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_CURVE_GFP,0),	"EC_GROUP_get_curve_GFp"},
-{ERR_PACK(0,EC_F_EC_GROUP_GET_EXTRA_DATA,0),	"EC_GROUP_get_extra_data"},
 {ERR_PACK(0,EC_F_EC_GROUP_GET_ORDER,0),	"EC_GROUP_get_order"},
 {ERR_PACK(0,EC_F_EC_GROUP_NEW,0),	"EC_GROUP_new"},
 {ERR_PACK(0,EC_F_EC_GROUP_PRECOMPUTE_MULT,0),	"EC_GROUP_precompute_mult"},
@@ -124,7 +123,6 @@ static ERR_STRING_DATA EC_str_reasons[]=
 {EC_R_INVALID_FIELD                      ,"invalid field"},
 {EC_R_INVALID_FORM                       ,"invalid form"},
 {EC_R_NOT_INITIALIZED                    ,"not initialized"},
-{EC_R_NO_SUCH_EXTRA_DATA                 ,"no such extra data"},
 {EC_R_POINT_AT_INFINITY                  ,"point at infinity"},
 {EC_R_POINT_IS_NOT_ON_CURVE              ,"point is not on curve"},
 {EC_R_SLOT_FULL                          ,"slot full"},

crypto/openssl/crypto/ec/ec_lib.c

@@ -268,7 +268,9 @@ void *EC_GROUP_get_extra_data(const EC_GROUP *group, void *(*extra_data_dup_func
 		|| (group->extra_data_free_func != extra_data_free_func)
 		|| (group->extra_data_clear_free_func != extra_data_clear_free_func))
 		{
-		ECerr(EC_F_EC_GROUP_GET_EXTRA_DATA, EC_R_NO_SUCH_EXTRA_DATA);
+#if 0 /* this was an error in 0.9.7, but that does not make a lot of sense */
+		ECerr(..._F_EC_GROUP_GET_EXTRA_DATA, ..._R_NO_SUCH_EXTRA_DATA);
+#endif
 		return NULL;
 		}
 

crypto/openssl/crypto/ec/ec_mult.c

@@ -209,6 +209,17 @@ int EC_POINTs_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
 	EC_POINT ***val_sub = NULL; /* pointers to sub-arrays of 'val' */
 	int ret = 0;
 	
+	if (group->meth != r->meth)
+		{
+		ECerr(EC_F_EC_POINTS_MUL, EC_R_INCOMPATIBLE_OBJECTS);
+		return 0;
+		}
+
+	if ((scalar == NULL) && (num == 0))
+		{
+		return EC_POINT_set_to_infinity(group, r);
+		}
+
 	if (scalar != NULL)
 		{
 		generator = EC_GROUP_get0_generator(group);

crypto/openssl/crypto/ec/ectest.c

@@ -70,7 +70,9 @@ int main(int argc, char * argv[]) { puts("Elliptic curves are disabled."); retur
 
 
 #include <openssl/ec.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/err.h>
 
 #define ABORT do { \
@@ -628,7 +630,9 @@ int main(int argc, char *argv[])
 	if (P_384) EC_GROUP_free(P_384);
 	if (P_521) EC_GROUP_free(P_521);
 
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE_cleanup();
+#endif
 	CRYPTO_cleanup_all_ex_data();
 	ERR_free_strings();
 	ERR_remove_state(0);

crypto/openssl/crypto/engine/Makefile.ssl

@@ -50,7 +50,7 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib
 
 files:

crypto/openssl/crypto/engine/engine.h

@@ -59,6 +59,12 @@
 #ifndef HEADER_ENGINE_H
 #define HEADER_ENGINE_H
 
+#include <openssl/opensslconf.h>
+
+#ifdef OPENSSL_NO_ENGINE
+#error ENGINE is disabled.
+#endif
+
 #include <openssl/ossl_typ.h>
 #include <openssl/bn.h>
 #ifndef OPENSSL_NO_RSA

crypto/openssl/crypto/engine/enginetest.c

@@ -56,9 +56,17 @@
  *
  */
 
-#include <openssl/e_os2.h>
 #include <stdio.h>
 #include <string.h>
+
+#ifdef OPENSSL_NO_ENGINE
+int main(int argc, char *argv[])
+{
+    printf("No ENGINE support\n");
+    return(0);
+}
+#else
+#include <openssl/e_os2.h>
 #include <openssl/buffer.h>
 #include <openssl/crypto.h>
 #include <openssl/engine.h>
@@ -272,3 +280,4 @@ int main(int argc, char *argv[])
 	CRYPTO_mem_leaks_fp(stderr);
 	return to_return;
 	}
+#endif

crypto/openssl/crypto/err/err.c

@@ -211,6 +211,7 @@ static ERR_STRING_DATA ERR_str_reasons[]=
 
 {0,NULL},
 	};
+#endif
 
 
 /* Define the predeclared (but externally opaque) "ERR_FNS" type */
@@ -491,6 +492,7 @@ static int int_err_get_next_lib(void)
 	}
 
 
+#ifndef OPENSSL_NO_ERR
 #define NUM_SYS_STR_REASONS 127
 #define LEN_SYS_STR_REASON 32
 

crypto/openssl/crypto/err/err_all.c

@@ -82,7 +82,9 @@
 #include <openssl/pkcs12.h>
 #include <openssl/rand.h>
 #include <openssl/dso.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/ocsp.h>
 #include <openssl/err.h>
 
@@ -122,7 +124,9 @@ void ERR_load_crypto_strings(void)
 	ERR_load_PKCS12_strings();
 	ERR_load_RAND_strings();
 	ERR_load_DSO_strings();
+#ifndef OPENSSL_NO_ENGINE
 	ERR_load_ENGINE_strings();
+#endif
 	ERR_load_OCSP_strings();
 	ERR_load_UI_strings();
 #endif

crypto/openssl/crypto/evp/digest.c

@@ -113,7 +113,9 @@
 #include "cryptlib.h"
 #include <openssl/objects.h>
 #include <openssl/evp.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 void EVP_MD_CTX_init(EVP_MD_CTX *ctx)
 	{
@@ -138,6 +140,7 @@ int EVP_DigestInit(EVP_MD_CTX *ctx, const EVP_MD *type)
 int EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl)
 	{
 	EVP_MD_CTX_clear_flags(ctx,EVP_MD_CTX_FLAG_CLEANED);
+#ifndef OPENSSL_NO_ENGINE
 	/* Whether it's nice or not, "Inits" can be used on "Final"'d contexts
 	 * so this context may already have an ENGINE! Try to avoid releasing
 	 * the previous handle, re-querying for an ENGINE, and having a
@@ -183,7 +186,9 @@ int EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl)
 		else
 			ctx->engine = NULL;
 		}
-	else if(!ctx->digest)
+	else
+#endif
+	if(!ctx->digest)
 		{
 		EVPerr(EVP_F_EVP_DIGESTINIT, EVP_R_NO_DIGEST_SET);
 		return 0;
@@ -196,7 +201,9 @@ int EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl)
 		if (type->ctx_size)
 			ctx->md_data=OPENSSL_malloc(type->ctx_size);
 		}
+#ifndef OPENSSL_NO_ENGINE
 skip_to_init:
+#endif
 	return ctx->digest->init(ctx);
 	}
 
@@ -246,12 +253,14 @@ int EVP_MD_CTX_copy_ex(EVP_MD_CTX *out, const EVP_MD_CTX *in)
 		EVPerr(EVP_F_EVP_MD_CTX_COPY,EVP_R_INPUT_NOT_INITIALIZED);
 		return 0;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	/* Make sure it's safe to copy a digest context using an ENGINE */
 	if (in->engine && !ENGINE_init(in->engine))
 		{
 		EVPerr(EVP_F_EVP_MD_CTX_COPY,ERR_R_ENGINE_LIB);
 		return 0;
 		}
+#endif
 
 	EVP_MD_CTX_cleanup(out);
 	memcpy(out,in,sizeof *out);
@@ -304,10 +313,12 @@ int EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx)
 		OPENSSL_cleanse(ctx->md_data,ctx->digest->ctx_size);
 		OPENSSL_free(ctx->md_data);
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if(ctx->engine)
 		/* The EVP_MD we used belongs to an ENGINE, release the
 		 * functional reference we held for this reason. */
 		ENGINE_finish(ctx->engine);
+#endif
 	memset(ctx,'\0',sizeof *ctx);
 
 	return 1;

crypto/openssl/crypto/evp/evp_acnf.c

@@ -59,7 +59,9 @@
 #include "cryptlib.h"
 #include <openssl/evp.h>
 #include <openssl/conf.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 
 
 /* Load all algorithms and configure OpenSSL.

crypto/openssl/crypto/evp/evp_enc.c

@@ -60,7 +60,9 @@
 #include "cryptlib.h"
 #include <openssl/evp.h>
 #include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include "evp_locl.h"
 
 const char *EVP_version="EVP" OPENSSL_VERSION_PTEXT;
@@ -91,6 +93,7 @@ int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *imp
 			enc = 1;
 		ctx->encrypt = enc;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	/* Whether it's nice or not, "Inits" can be used on "Final"'d contexts
 	 * so this context may already have an ENGINE! Try to avoid releasing
 	 * the previous handle, re-querying for an ENGINE, and having a
@@ -98,6 +101,7 @@ int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *imp
 	if (ctx->engine && ctx->cipher && (!cipher ||
 			(cipher && (cipher->nid == ctx->cipher->nid))))
 		goto skip_to_init;
+#endif
 	if (cipher)
 		{
 		/* Ensure a context left lying around from last time is cleared
@@ -107,6 +111,7 @@ int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *imp
 
 		/* Restore encrypt field: it is zeroed by cleanup */
 		ctx->encrypt = enc;
+#ifndef OPENSSL_NO_ENGINE
 		if(impl)
 			{
 			if (!ENGINE_init(impl))
@@ -140,6 +145,7 @@ int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *imp
 			}
 		else
 			ctx->engine = NULL;
+#endif
 
 		ctx->cipher=cipher;
 		ctx->cipher_data=OPENSSL_malloc(ctx->cipher->ctx_size);
@@ -159,7 +165,9 @@ int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *imp
 		EVPerr(EVP_F_EVP_CIPHERINIT, EVP_R_NO_CIPHER_SET);
 		return 0;
 		}
+#ifndef OPENSSL_NO_ENGINE
 skip_to_init:
+#endif
 	/* we assume block size is a power of 2 in *cryptUpdate */
 	OPENSSL_assert(ctx->cipher->block_size == 1
 	    || ctx->cipher->block_size == 8
@@ -236,7 +244,7 @@ int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher, ENGINE *imp
 int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
 	     const unsigned char *key, const unsigned char *iv)
 	{
-	return EVP_CipherInit_ex(ctx, cipher, NULL, key, iv, 0);
+	return EVP_CipherInit(ctx, cipher, key, iv, 0);
 	}
 
 int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *impl,
@@ -460,10 +468,12 @@ int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *c)
 		}
 	if (c->cipher_data)
 		OPENSSL_free(c->cipher_data);
+#ifndef OPENSSL_NO_ENGINE
 	if (c->engine)
 		/* The EVP_CIPHER we used belongs to an ENGINE, release the
 		 * functional reference we held for this reason. */
 		ENGINE_finish(c->engine);
+#endif
 	memset(c,0,sizeof(EVP_CIPHER_CTX));
 	return 1;
 	}

crypto/openssl/crypto/evp/evp_test.c

@@ -53,7 +53,10 @@
 #include "../e_os.h"
 
 #include <openssl/evp.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
+#include <openssl/err.h>
 #include <openssl/conf.h>
 
 static void hexdump(FILE *f,const char *title,const unsigned char *s,int l)
@@ -330,11 +333,14 @@ int main(int argc,char **argv)
     /* Load up the software EVP_CIPHER and EVP_MD definitions */
     OpenSSL_add_all_ciphers();
     OpenSSL_add_all_digests();
+#ifndef OPENSSL_NO_ENGINE
     /* Load all compiled-in ENGINEs */
     ENGINE_load_builtin_engines();
+#endif
 #if 0
     OPENSSL_config();
 #endif
+#ifndef OPENSSL_NO_ENGINE
     /* Register all available ENGINE implementations of ciphers and digests.
      * This could perhaps be changed to "ENGINE_register_all_complete()"? */
     ENGINE_register_all_ciphers();
@@ -343,6 +349,7 @@ int main(int argc,char **argv)
      * It'll prevent ENGINEs being ENGINE_init()ialised for cipher/digest use if
      * they weren't already initialised. */
     /* ENGINE_set_cipher_flags(ENGINE_CIPHER_FLAG_NOINIT); */
+#endif
 
     for( ; ; )
 	{
@@ -384,7 +391,9 @@ int main(int argc,char **argv)
 	    }
 	}
 
+#ifndef OPENSSL_NO_ENGINE
     ENGINE_cleanup();
+#endif
     EVP_cleanup();
     CRYPTO_cleanup_all_ex_data();
     ERR_remove_state(0);

crypto/openssl/crypto/krb5/Makefile.ssl

@@ -41,7 +41,7 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib
 
 files:

crypto/openssl/crypto/md2/md2test.c

@@ -125,7 +125,6 @@ int main(int argc, char *argv[])
 		P++;
 		}
 	EXIT(err);
-	return(0);
 	}
 
 static char *pt(unsigned char *md)

crypto/openssl/crypto/md4/md4.c

@@ -64,7 +64,7 @@
 
 void do_fp(FILE *f);
 void pt(unsigned char *md);
-#ifndef _OSD_POSIX
+#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
 int read(int, void *, unsigned int);
 #endif
 

crypto/openssl/crypto/md5/Makefile.ssl

@@ -21,14 +21,6 @@ MD5_ASM_OBJ=
 
 CFLAGS= $(INCLUDES) $(CFLAG)
 
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAGS=$(CFLAGS)
-
 GENERAL=Makefile
 TEST=md5test.c
 APPS=
@@ -55,14 +47,8 @@ lib:    $(LIBOBJ)
 	@touch lib
 
 # elf
-asm/mx86-elf.o: asm/mx86unix.cpp
-	$(CPP) -DELF -x c asm/mx86unix.cpp | as -o asm/mx86-elf.o
-
-# solaris
-asm/mx86-sol.o: asm/mx86unix.cpp
-	$(CC) -E -DSOL asm/mx86unix.cpp | sed 's/^#.*//' > asm/mx86-sol.s
-	as -o asm/mx86-sol.o asm/mx86-sol.s
-	rm -f asm/mx86-sol.s
+asm/mx86-elf.s: asm/md5-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) md5-586.pl elf $(CFLAGS) > mx86-elf.s)
 
 # a.out
 asm/mx86-out.o: asm/mx86unix.cpp
@@ -125,7 +111,7 @@ dclean:
 	mv -f Makefile.new $(MAKEFILE)
 
 clean:
-	rm -f asm/mx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+	rm -f asm/mx86unix.cpp asm/*-elf.* *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 

crypto/openssl/crypto/md5/md5.c

@@ -64,7 +64,7 @@
 
 void do_fp(FILE *f);
 void pt(unsigned char *md);
-#ifndef _OSD_POSIX
+#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
 int read(int, void *, unsigned int);
 #endif
 

crypto/openssl/crypto/md5/md5.h

@@ -78,7 +78,7 @@ extern "C" {
 
 #if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
 #define MD5_LONG unsigned long
-#elif defined(OENSSL_SYS_CRAY) || defined(__ILP64__)
+#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
 #define MD5_LONG unsigned long
 #define MD5_LONG_LOG2 3
 /*

crypto/openssl/crypto/mem.c

@@ -252,6 +252,8 @@ void *CRYPTO_malloc_locked(int num, const char *file, int line)
 	void *ret = NULL;
 	extern unsigned char cleanse_ctr;
 
+	if (num < 0) return NULL;
+
 	allow_customize = 0;
 	if (malloc_debug_func != NULL)
 		{
@@ -291,6 +293,8 @@ void *CRYPTO_malloc(int num, const char *file, int line)
 	void *ret = NULL;
 	extern unsigned char cleanse_ctr;
 
+	if (num < 0) return NULL;
+
 	allow_customize = 0;
 	if (malloc_debug_func != NULL)
 		{
@@ -319,6 +323,9 @@ void *CRYPTO_realloc(void *str, int num, const char *file, int line)
 
 	if (str == NULL)
 		return CRYPTO_malloc(num, file, line);
+
+ 	if (num < 0) return NULL;
+ 
 	if (realloc_debug_func != NULL)
 		realloc_debug_func(str, NULL, num, file, line, 0);
 	ret = realloc_ex_func(str,num,file,line);
@@ -338,6 +345,9 @@ void *CRYPTO_realloc_clean(void *str, int old_len, int num, const char *file,
 
 	if (str == NULL)
 		return CRYPTO_malloc(num, file, line);
+ 
+ 	if (num < 0) return NULL;
+ 
 	if (realloc_debug_func != NULL)
 		realloc_debug_func(str, NULL, num, file, line, 0);
 	ret=malloc_ex_func(num,file,line);

crypto/openssl/crypto/o_time.c

@@ -80,7 +80,8 @@ struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result)
 	ts = result;
 #elif !defined(OPENSSL_SYS_VMS)
 	ts = gmtime(timer);
-	memcpy(result, ts, sizeof(struct tm));
+	if (ts != NULL)
+		memcpy(result, ts, sizeof(struct tm));
 	ts = result;
 #endif
 #ifdef OPENSSL_SYS_VMS

crypto/openssl/crypto/objects/obj_dat.h

@@ -827,7 +827,7 @@ static ASN1_OBJECT nid_objs[NUM_NID]={
 {"RC4-40","rc4-40",NID_rc4_40,0,NULL},
 {"RC2-40-CBC","rc2-40-cbc",NID_rc2_40_cbc,0,NULL},
 {"GN","givenName",NID_givenName,3,&(lvalues[535]),0},
-{"SN","surName",NID_surname,3,&(lvalues[538]),0},
+{"SN","surname",NID_surname,3,&(lvalues[538]),0},
 {"initials","initials",NID_initials,3,&(lvalues[541]),0},
 {NULL,NULL,NID_undef,0,NULL},
 {"crlDistributionPoints","X509v3 CRL Distribution Points",
@@ -3005,7 +3005,7 @@ static ASN1_OBJECT *ln_objs[NUM_LN]={
 &(nid_objs[16]),/* "stateOrProvinceName" */
 &(nid_objs[498]),/* "subtreeMaximumQuality" */
 &(nid_objs[497]),/* "subtreeMinimumQuality" */
-&(nid_objs[100]),/* "surName" */
+&(nid_objs[100]),/* "surname" */
 &(nid_objs[459]),/* "textEncodedORAddress" */
 &(nid_objs[293]),/* "textNotice" */
 &(nid_objs[106]),/* "title" */

crypto/openssl/crypto/objects/obj_mac.h

@@ -1596,7 +1596,7 @@
 #define OBJ_commonName		OBJ_X509,3L
 
 #define SN_surname		"SN"
-#define LN_surname		"surName"
+#define LN_surname		"surname"
 #define NID_surname		100
 #define OBJ_surname		OBJ_X509,4L
 

crypto/openssl/crypto/objects/objects.txt

@@ -531,8 +531,7 @@ algorithm 29		: RSA-SHA1-2		: sha1WithRSA
 
 X500 4			: X509
 X509 3			: CN			: commonName
-!Cname surname
-X509 4			: SN			: surName
+X509 4			: SN			: surname
 X509 5			: 			: serialNumber
 X509 6			: C			: countryName
 X509 7			: L			: localityName

crypto/openssl/crypto/ocsp/Makefile.ssl

@@ -43,7 +43,7 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib
 
 files:

crypto/openssl/crypto/opensslv.h

@@ -25,8 +25,8 @@
  * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
  *  major minor fix final patch/beta)
  */
-#define OPENSSL_VERSION_NUMBER	0x0090700fL
-#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.7 31 Dec 2002"
+#define OPENSSL_VERSION_NUMBER	0x0090701fL
+#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.7a Feb 19 2003"
 #define OPENSSL_VERSION_PTEXT	" part of " OPENSSL_VERSION_TEXT
 
 

crypto/openssl/crypto/perlasm/x86asm.pl

@@ -18,9 +18,9 @@ sub main'asm_init
 	($type,$fn,$i386)=@_;
 	$filename=$fn;
 
-	$cpp=$sol=$aout=$win32=$gaswin=0;
+	$elf=$cpp=$sol=$aout=$win32=$gaswin=0;
 	if (	($type eq "elf"))
-		{ require "x86unix.pl"; }
+		{ $elf=1; require "x86unix.pl"; }
 	elsif (	($type eq "a.out"))
 		{ $aout=1; require "x86unix.pl"; }
 	elsif (	($type eq "gaswin"))
@@ -47,6 +47,9 @@ EOF
 		exit(1);
 		}
 
+	$pic=0;
+	for (@ARGV) {	$pic=1 if (/\-[fK]PIC/i);	}
+
 	&asm_init_output();
 
 &comment("Don't even think of reading this code");
@@ -91,7 +94,7 @@ $tmp
 #undef SIZE
 #undef TYPE
 #define SIZE(a,b)
-#define TYPE(a,b)
+#define TYPE(a,b)	.def a; .scl 2; .type 32; .endef
 #endif /* __CYGWIN || __DJGPP */
 #endif