d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add an EARLY_AP_STARTUP option to start APs earlier during boot.

Browse Source 
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.

This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed).  This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP.  It also permits all CPUs to be available for
handling interrupts before any devices are probed.

This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot.  Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.

However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system.  In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU.  Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.

Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code.  This removes the need to treat the single-CPU boot environment
as a special case.

As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP).  This will allow the option to be turned off
if need be during initial testing.  I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0.  Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.

These changes have only been tested on x86.  Other platform maintainers
are encouraged to port their architectures over as well.  The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).

PR:		kern/199321
Reviewed by:	markj, gnn, kib
Sponsored by:	Netflix
This commit is contained in:
John Baldwin 2016-05-14 18:22:52 +00:00
parent c9aad79aa9
commit fdce57a042
Notes: svn2git 2020-12-20 02:59:44 +00:00 
svn path=/head/; revision=299746
22 changed files with 256 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
sys/cddl/dev/dtrace/amd64/dtrace_subr.c
View File

@ -246,6 +246,26 @@ static uint64_t nsec_scale;
/* See below for the explanation of this macro. */
#define SCALE_SHIFT 28
static void
dtrace_gethrtime_init_cpu(void *arg)
{
uintptr_t cpu = (uintptr_t) arg;
if (cpu == curcpu)
tgt_cpu_tsc = rdtsc();
else
hst_cpu_tsc = rdtsc();
}
#ifdef EARLY_AP_STARTUP
static void
dtrace_gethrtime_init(void *arg)
{
struct pcpu *pc;
uint64_t tsc_f;
cpuset_t map;
int i;
#else
/*
* Get the frequency and scale factor as early as possible so that they can be
* used for boot-time tracing.
@ -254,6 +274,7 @@ static void
dtrace_gethrtime_init_early(void *arg)
{
uint64_t tsc_f;
#endif
/*
* Get TSC frequency known at this moment.
@ -282,27 +303,18 @@ dtrace_gethrtime_init_early(void *arg)
* (terahertz) values;
*/
nsec_scale = ((uint64_t)NANOSEC << SCALE_SHIFT) / tsc_f;
#ifndef EARLY_AP_STARTUP
}
SYSINIT(dtrace_gethrtime_init_early, SI_SUB_CPU, SI_ORDER_ANY,
dtrace_gethrtime_init_early, NULL);
static void
dtrace_gethrtime_init_cpu(void *arg)
{
uintptr_t cpu = (uintptr_t) arg;
if (cpu == curcpu)
tgt_cpu_tsc = rdtsc();
else
hst_cpu_tsc = rdtsc();
}
static void
dtrace_gethrtime_init(void *arg)
{
struct pcpu *pc;
cpuset_t map;
int i;
#endif
/* The current CPU is the reference one. */
sched_pin();
@ -323,8 +335,13 @@ dtrace_gethrtime_init(void *arg)
}
sched_unpin();
}
#ifdef EARLY_AP_STARTUP
SYSINIT(dtrace_gethrtime_init, SI_SUB_DTRACE, SI_ORDER_ANY,
dtrace_gethrtime_init, NULL);
#else
SYSINIT(dtrace_gethrtime_init, SI_SUB_SMP, SI_ORDER_ANY, dtrace_gethrtime_init,
NULL);
#endif
/*
* DTrace needs a high resolution time function which can

11
sys/cddl/dev/dtrace/dtrace_load.c
View File

@ -22,6 +22,7 @@
*
*/
#ifndef EARLY_AP_STARTUP
static void
dtrace_ap_start(void *dummy)
{
@ -41,11 +42,15 @@ dtrace_ap_start(void *dummy)
}
SYSINIT(dtrace_ap_start, SI_SUB_SMP, SI_ORDER_ANY, dtrace_ap_start, NULL);
#endif
static void
dtrace_load(void *dummy)
{
dtrace_provider_id_t id;
#ifdef EARLY_AP_STARTUP
int i;
#endif
/* Hook into the trap handler. */
dtrace_trap_func = dtrace_trap;
@ -142,8 +147,14 @@ dtrace_load(void *dummy)
mutex_enter(&cpu_lock);
#ifdef EARLY_AP_STARTUP
CPU_FOREACH(i) {
(void) dtrace_cpu_setup(CPU_CONFIG, i);
}
#else
/* Setup the boot CPU */
(void) dtrace_cpu_setup(CPU_CONFIG, 0);
#endif
mutex_exit(&cpu_lock);

39
sys/cddl/dev/dtrace/i386/dtrace_subr.c
View File

@ -248,6 +248,26 @@ static uint64_t nsec_scale;
/* See below for the explanation of this macro. */
#define SCALE_SHIFT 28
static void
dtrace_gethrtime_init_cpu(void *arg)
{
uintptr_t cpu = (uintptr_t) arg;
if (cpu == curcpu)
tgt_cpu_tsc = rdtsc();
else
hst_cpu_tsc = rdtsc();
}
#ifdef EARLY_AP_STARTUP
static void
dtrace_gethrtime_init(void *arg)
{
struct pcpu *pc;
uint64_t tsc_f;
cpuset_t map;
int i;
#else
/*
* Get the frequency and scale factor as early as possible so that they can be
* used for boot-time tracing.
@ -256,6 +276,7 @@ static void
dtrace_gethrtime_init_early(void *arg)
{
uint64_t tsc_f;
#endif
/*
* Get TSC frequency known at this moment.
@ -284,27 +305,18 @@ dtrace_gethrtime_init_early(void *arg)
* (terahertz) values;
*/
nsec_scale = ((uint64_t)NANOSEC << SCALE_SHIFT) / tsc_f;
#ifndef EARLY_AP_STARTUP
}
SYSINIT(dtrace_gethrtime_init_early, SI_SUB_CPU, SI_ORDER_ANY,
dtrace_gethrtime_init_early, NULL);
static void
dtrace_gethrtime_init_cpu(void *arg)
{
uintptr_t cpu = (uintptr_t) arg;
if (cpu == curcpu)
tgt_cpu_tsc = rdtsc();
else
hst_cpu_tsc = rdtsc();
}
static void
dtrace_gethrtime_init(void *arg)
{
cpuset_t map;
struct pcpu *pc;
int i;
#endif
/* The current CPU is the reference one. */
sched_pin();
@ -325,8 +337,13 @@ dtrace_gethrtime_init(void *arg)
}
sched_unpin();
}
#ifdef EARLY_AP_STARTUP
SYSINIT(dtrace_gethrtime_init, SI_SUB_DTRACE, SI_ORDER_ANY,
dtrace_gethrtime_init, NULL);
#else
SYSINIT(dtrace_gethrtime_init, SI_SUB_SMP, SI_ORDER_ANY, dtrace_gethrtime_init,
NULL);
#endif
/*
* DTrace needs a high resolution time function which can

9
sys/cddl/dev/dtrace/powerpc/dtrace_subr.c
View File

@ -218,8 +218,13 @@ dtrace_gethrtime_init(void *arg)
}
sched_unpin();
}
SYSINIT(dtrace_gethrtime_init, SI_SUB_SMP, SI_ORDER_ANY, dtrace_gethrtime_init, NULL);
#ifdef EARLY_AP_STARTUP
SYSINIT(dtrace_gethrtime_init, SI_SUB_DTRACE, SI_ORDER_ANY,
dtrace_gethrtime_init, NULL);
#else
SYSINIT(dtrace_gethrtime_init, SI_SUB_SMP, SI_ORDER_ANY, dtrace_gethrtime_init,
NULL);
#endif
/*
* DTrace needs a high resolution time function which can

6
sys/conf/NOTES
View File

@ -223,6 +223,12 @@ options SCHED_STATS
# Mandatory:
options SMP # Symmetric MultiProcessor Kernel
# EARLY_AP_STARTUP releases the Application Processors earlier in the
# kernel startup process (before devices are probed) rather than at the
# end. This is a temporary option for use during the transition from
# late to early AP startup.
options EARLY_AP_STARTUP
# MAXCPU defines the maximum number of CPUs that can boot in the system.
# A default value should be already present, for every architecture.
options MAXCPU=32

1
sys/conf/options
View File

@ -620,6 +620,7 @@ DEBUG_MEMGUARD opt_vm.h
DEBUG_REDZONE opt_vm.h
# Standard SMP options
EARLY_AP_STARTUP opt_global.h
SMP opt_global.h
# Size of the kernel message buffer

13
sys/dev/acpica/acpi.c
View File

@ -2856,11 +2856,18 @@ acpi_EnterSleepState(struct acpi_softc *sc, int state)
stop_all_proc();
EVENTHANDLER_INVOKE(power_suspend);
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
thread_lock(curthread);
sched_bind(curthread, 0);
thread_unlock(curthread);
#else
if (smp_started) {
thread_lock(curthread);
sched_bind(curthread, 0);
thread_unlock(curthread);
}
#endif
/*
* Be sure to hold Giant across DEVICE_SUSPEND/RESUME since non-MPSAFE
@ -2991,11 +2998,17 @@ acpi_EnterSleepState(struct acpi_softc *sc, int state)
mtx_unlock(&Giant);
#ifdef EARLY_AP_STARTUP
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
#else
if (smp_started) {
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
}
#endif
resume_all_proc();

4
sys/dev/acpica/acpi_cpu.c
View File

@ -439,8 +439,12 @@ acpi_cpu_postattach(void *unused __unused)
free(devices, M_TEMP);
if (attached) {
#ifdef EARLY_AP_STARTUP
acpi_cpu_startup(NULL);
#else
/* Queue post cpu-probing task handler */
AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_cpu_startup, NULL);
#endif
}
}

4
sys/dev/hwpmc/hwpmc_mod.c
View File

@ -334,7 +334,11 @@ static moduledata_t pmc_mod = {
&pmc_syscall_mod
};
#ifdef EARLY_AP_STARTUP
DECLARE_MODULE(pmc, pmc_mod, SI_SUB_SYSCALLS, SI_ORDER_ANY);
#else
DECLARE_MODULE(pmc, pmc_mod, SI_SUB_SMP, SI_ORDER_ANY);
#endif
MODULE_VERSION(pmc, PMC_VERSION);
#ifdef HWPMC_DEBUG

10
sys/dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c
View File

@ -519,6 +519,7 @@ vmbus_attach(device_t dev)
device_printf(dev, "VMBUS: attach dev: %p\n", dev);
vmbus_devp = dev;
#ifndef EARLY_AP_STARTUP
/*
* If the system has already booted and thread
* scheduling is possible indicated by the global
@ -526,6 +527,7 @@ vmbus_attach(device_t dev)
* initialization directly.
*/
if (!cold)
#endif
vmbus_bus_init();
bus_generic_probe(dev);
@ -538,6 +540,7 @@ vmbus_init(void)
if (vm_guest != VM_GUEST_HV)
return;
#ifndef EARLY_AP_STARTUP
/*
* If the system has already booted and thread
* scheduling is possible, as indicated by the
@ -545,6 +548,7 @@ vmbus_init(void)
* initialization directly.
*/
if (!cold)
#endif
vmbus_bus_init();
}
@ -611,6 +615,9 @@ vmbus_modevent(module_t mod, int what, void *arg)
switch (what) {
case MOD_LOAD:
#ifdef EARLY_AP_STARTUP
vmbus_init();
#endif
vmbus_mod_load();
break;
case MOD_UNLOAD:
@ -649,6 +656,7 @@ DRIVER_MODULE(vmbus, acpi, vmbus_driver, vmbus_devclass, vmbus_modevent, 0);
MODULE_DEPEND(vmbus, acpi, 1, 1, 1);
MODULE_VERSION(vmbus, 1);
#ifndef EARLY_AP_STARTUP
/* We want to be started after SMP is initialized */
SYSINIT(vmb_init, SI_SUB_SMP + 1, SI_ORDER_FIRST, vmbus_init, NULL);
#endif

25
sys/dev/xen/control/control.c
View File

@ -202,11 +202,18 @@ xctrl_suspend()
stop_all_proc();
EVENTHANDLER_INVOKE(power_suspend);
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
thread_lock(curthread);
sched_bind(curthread, 0);
thread_unlock(curthread);
#else
if (smp_started) {
thread_lock(curthread);
sched_bind(curthread, 0);
thread_unlock(curthread);
}
#endif
KASSERT((PCPU_GET(cpuid) == 0), ("Not running on CPU#0"));
/*
@ -227,6 +234,17 @@ xctrl_suspend()
}
#ifdef SMP
#ifdef EARLY_AP_STARTUP
/*
* Suspend other CPUs. This prevents IPIs while we
* are resuming, and will allow us to reset per-cpu
* vcpu_info on resume.
*/
cpu_suspend_map = all_cpus;
CPU_CLR(PCPU_GET(cpuid), &cpu_suspend_map);
if (!CPU_EMPTY(&cpu_suspend_map))
suspend_cpus(cpu_suspend_map);
#else
CPU_ZERO(&cpu_suspend_map); /* silence gcc */
if (smp_started) {
/*
@ -239,6 +257,7 @@ xctrl_suspend()
if (!CPU_EMPTY(&cpu_suspend_map))
suspend_cpus(cpu_suspend_map);
}
#endif
#endif
/*
@ -285,11 +304,17 @@ xctrl_suspend()
timecounter->tc_get_timecount(timecounter);
inittodr(time_second);
#ifdef EARLY_AP_STARTUP
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
#else
if (smp_started) {
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
}
#endif
resume_all_proc();

4
sys/geom/eli/g_eli.c
View File

@ -479,7 +479,9 @@ g_eli_worker(void *arg)
wr = arg;
sc = wr->w_softc;
#ifdef SMP
#ifdef EARLY_AP_STARTUP
MPASS(!sc->sc_cpubind || smp_started);
#elif defined(SMP)
/* Before sched_bind() to a CPU, wait for all CPUs to go on-line. */
if (sc->sc_cpubind) {
while (!smp_started)

33
sys/kern/kern_clock.c
View File

@ -391,6 +391,10 @@ static void
initclocks(dummy)
void *dummy;
{
#ifdef EARLY_AP_STARTUP
struct proc *p;
struct thread *td;
#endif
register int i;
/*
@ -415,6 +419,35 @@ initclocks(dummy)
* sign problems sooner.
*/
ticks = INT_MAX - (hz * 10 * 60);
#ifdef EARLY_AP_STARTUP
/*
* Fixup the tick counts in any blocked or sleeping threads to
* account for the jump above.
*/
sx_slock(&allproc_lock);
FOREACH_PROC_IN_SYSTEM(p) {
PROC_LOCK(p);
if (p->p_state == PRS_NEW) {
PROC_UNLOCK(p);
continue;
}
FOREACH_THREAD_IN_PROC(p, td) {
thread_lock(td);
if (TD_ON_LOCK(td)) {
MPASS(td->td_blktick == 0);
td->td_blktick = ticks;
}
if (TD_ON_SLEEPQ(td)) {
MPASS(td->td_slptick == 0);
td->td_slptick = ticks;
}
thread_unlock(td);
}
PROC_UNLOCK(p);
}
sx_sunlock(&allproc_lock);
#endif
}
/*

17
sys/kern/kern_clocksource.c
View File

@ -322,9 +322,16 @@ timercb(struct eventtimer *et, void *arg)
curcpu, (int)(now >> 32), (u_int)(now & 0xffffffff));
#ifdef SMP
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
#endif
/* Prepare broadcasting to other CPUs for non-per-CPU timers. */
bcast = 0;
#ifdef EARLY_AP_STARTUP
if ((et->et_flags & ET_FLAGS_PERCPU) == 0) {
#else
if ((et->et_flags & ET_FLAGS_PERCPU) == 0 && smp_started) {
#endif
CPU_FOREACH(cpu) {
state = DPCPU_ID_PTR(cpu, timerstate);
ET_HW_LOCK(state);
@ -485,12 +492,17 @@ configtimer(int start)
nexttick = next;
else
nexttick = -1;
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
#endif
CPU_FOREACH(cpu) {
state = DPCPU_ID_PTR(cpu, timerstate);
state->now = now;
#ifndef EARLY_AP_STARTUP
if (!smp_started && cpu != CPU_FIRST())
state->nextevent = SBT_MAX;
else
#endif
state->nextevent = next;
if (periodic)
state->nexttick = next;
@ -513,8 +525,13 @@ configtimer(int start)
}
ET_HW_UNLOCK(DPCPU_PTR(timerstate));
#ifdef SMP
#ifdef EARLY_AP_STARTUP
/* If timer is global we are done. */
if ((timer->et_flags & ET_FLAGS_PERCPU) == 0) {
#else
/* If timer is global or there is no other CPUs yet - we are done. */
if ((timer->et_flags & ET_FLAGS_PERCPU) == 0 || !smp_started) {
#endif
critical_exit();
return;
}

4
sys/kern/kern_cpu.c
View File

@ -259,6 +259,9 @@ cf_set_method(device_t dev, const struct cf_level *level, int priority)
CF_MTX_LOCK(&sc->lock);
#ifdef SMP
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
#else
/*
* If still booting and secondary CPUs not started yet, don't allow
* changing the frequency until they're online. This is because we
@ -271,6 +274,7 @@ cf_set_method(device_t dev, const struct cf_level *level, int priority)
error = ENXIO;
goto out;
}
#endif
#endif /* SMP */
/*

15
sys/net/netisr.c
View File

@ -1119,6 +1119,10 @@ netisr_start_swi(u_int cpuid, struct pcpu *pc)
static void
netisr_init(void *arg)
{
#ifdef EARLY_AP_STARTUP
struct pcpu *pc;
#endif
KASSERT(curcpu == 0, ("%s: not on CPU 0", __func__));
NETISR_LOCK_INIT();
@ -1149,10 +1153,20 @@ netisr_init(void *arg)
netisr_bindthreads = 0;
}
#endif
#ifdef EARLY_AP_STARTUP
STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) {
if (nws_count >= netisr_maxthreads)
break;
netisr_start_swi(pc->pc_cpuid, pc);
}
#else
netisr_start_swi(curcpu, pcpu_find(curcpu));
#endif
}
SYSINIT(netisr_init, SI_SUB_SOFTINTR, SI_ORDER_FIRST, netisr_init, NULL);
#ifndef EARLY_AP_STARTUP
/*
* Start worker threads for additional CPUs. No attempt to gracefully handle
* work reassignment, we don't yet support dynamic reconfiguration.
@ -1172,6 +1186,7 @@ netisr_start(void *arg)
}
}
SYSINIT(netisr_start, SI_SUB_SMP, SI_ORDER_MIDDLE, netisr_start, NULL);
#endif
/*
* Sysctl monitoring for netisr: query a list of registered protocols.

7
sys/sys/kernel.h
View File

@ -118,7 +118,10 @@ enum sysinit_sub_id {
SI_SUB_SCHED_IDLE = 0x2600000, /* required idle procs */
SI_SUB_MBUF = 0x2700000, /* mbuf subsystem */
SI_SUB_INTR = 0x2800000, /* interrupt threads */
SI_SUB_SOFTINTR = 0x2800001, /* start soft interrupt thread */
#ifdef EARLY_AP_STARTUP
SI_SUB_SMP = 0x2900000, /* start the APs*/
#endif
SI_SUB_SOFTINTR = 0x2A00000, /* start soft interrupt thread */
SI_SUB_DEVFS = 0x2F00000, /* devfs ready for devices */
SI_SUB_INIT_IF = 0x3000000, /* prep for net interfaces */
SI_SUB_NETGRAPH = 0x3010000, /* Let Netgraph initialize */
@ -154,7 +157,9 @@ enum sysinit_sub_id {
SI_SUB_KTHREAD_BUF = 0xea00000, /* buffer daemon*/
SI_SUB_KTHREAD_UPDATE = 0xec00000, /* update daemon*/
SI_SUB_KTHREAD_IDLE = 0xee00000, /* idle procs*/
#ifndef EARLY_AP_STARTUP
SI_SUB_SMP = 0xf000000, /* start the APs*/
#endif
SI_SUB_RACCTD = 0xf100000, /* start racctd*/
SI_SUB_LAST = 0xfffffff /* final initialization */
};

19
sys/x86/isa/clock.c
View File

@ -475,8 +475,27 @@ startrtclock()
void
cpu_initclocks(void)
{
#ifdef EARLY_AP_STARTUP
struct thread *td;
int i;
td = curthread;
cpu_initclocks_bsp();
CPU_FOREACH(i) {
if (i == 0)
continue;
thread_lock(td);
sched_bind(td, i);
thread_unlock(td);
cpu_initclocks_ap();
}
thread_lock(td);
if (sched_is_bound(td))
sched_unbind(td);
thread_unlock(td);
#else
cpu_initclocks_bsp();
#endif
}
static int

13
sys/x86/x86/intr_machdep.c
View File

@ -77,7 +77,7 @@ static struct mtx intr_table_lock;
static struct mtx intrcnt_lock;
static TAILQ_HEAD(pics_head, pic) pics;
#ifdef SMP
#if defined(SMP) && !defined(EARLY_AP_STARTUP)
static int assign_cpu;
#endif
@ -320,11 +320,16 @@ intr_assign_cpu(void *arg, int cpu)
struct intsrc *isrc;
int error;
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
if (cpu != NOCPU) {
#else
/*
* Don't do anything during early boot. We will pick up the
* assignment once the APs are started.
*/
if (assign_cpu && cpu != NOCPU) {
#endif
isrc = arg;
mtx_lock(&intr_table_lock);
error = isrc->is_pic->pic_assign_cpu(isrc, cpu_apic_ids[cpu]);
@ -502,9 +507,13 @@ intr_next_cpu(void)
{
u_int apic_id;
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
#else
/* Leave all interrupts on the BSP during boot. */
if (!assign_cpu)
return (PCPU_GET(apic_id));
#endif
mtx_lock_spin(&icu_lock);
apic_id = cpu_apic_ids[current_cpu];
@ -546,6 +555,7 @@ intr_add_cpu(u_int cpu)
CPU_SET(cpu, &intr_cpus);
}
#ifndef EARLY_AP_STARTUP
/*
* Distribute all the interrupt sources among the available CPUs once the
* AP's have been launched.
@ -586,6 +596,7 @@ intr_shuffle_irqs(void *arg __unused)
}
SYSINIT(intr_shuffle_irqs, SI_SUB_SMP, SI_ORDER_SECOND, intr_shuffle_irqs,
NULL);
#endif
#else
/*
* Always route interrupts to the current processor in the UP case.

5
sys/x86/x86/local_apic.c
View File

@ -749,6 +749,10 @@ native_lapic_enable_pmc(void)
lvts[APIC_LVT_PMC].lvt_masked = 0;
#ifdef EARLY_AP_STARTUP
MPASS(mp_ncpus == 1 || smp_started);
smp_rendezvous(NULL, lapic_update_pmc, NULL, NULL);
#else
#ifdef SMP
/*
* If hwpmc was loaded at boot time then the APs may not be
@ -760,6 +764,7 @@ native_lapic_enable_pmc(void)
else
#endif
lapic_update_pmc(NULL);
#endif
return (1);
#else
return (0);

4
sys/x86/x86/mca.c
View File

@ -726,7 +726,11 @@ mca_startup(void *dummy)
callout_reset(&mca_timer, mca_ticks * hz, mca_periodic_scan, NULL);
}
#ifdef EARLY_AP_STARTUP
SYSINIT(mca_startup, SI_SUB_KICK_SCHEDULER, SI_ORDER_ANY, mca_startup, NULL);
#else
SYSINIT(mca_startup, SI_SUB_SMP, SI_ORDER_ANY, mca_startup, NULL);
#endif
#ifdef DEV_APIC
static void

2
sys/x86/x86/mp_x86.c
View File

@ -933,8 +933,10 @@ init_secondary_tail(void)
while (atomic_load_acq_int(&smp_started) == 0)
ia32_pause();
#ifndef EARLY_AP_STARTUP
/* Start per-CPU event timers. */
cpu_initclocks_ap();
#endif
sched_throw(NULL);