arm64: allwinner: Add support for the usb3 phy
The usb 3 controller in the H6 SoC have a dedicated phy. Add support for it. Mostly imported from NetBSD MFC after: 1 month
This commit is contained in:
parent
126700faec
commit
fe924cbd5a
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=353531
299
sys/arm/allwinner/aw_usb3phy.c
Normal file
299
sys/arm/allwinner/aw_usb3phy.c
Normal file
@ -0,0 +1,299 @@
|
||||
/* $NetBSD: sunxi_usb3phy.c,v 1.1 2018/05/01 23:59:42 jmcneill Exp $ */
|
||||
|
||||
/*-
|
||||
* Copyright (c) 2018 Jared McNeill <jmcneill@invisible.ca>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
||||
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||||
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
||||
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Allwinner USB3PHY
|
||||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__FBSDID("$FreeBSD$");
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/bus.h>
|
||||
#include <sys/rman.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/module.h>
|
||||
#include <sys/gpio.h>
|
||||
#include <machine/bus.h>
|
||||
|
||||
#include <dev/ofw/ofw_bus.h>
|
||||
#include <dev/ofw/ofw_bus_subr.h>
|
||||
|
||||
#include <dev/extres/clk/clk.h>
|
||||
#include <dev/extres/hwreset/hwreset.h>
|
||||
#include <dev/extres/regulator/regulator.h>
|
||||
#include <dev/extres/phy/phy_usb.h>
|
||||
|
||||
#include "phynode_if.h"
|
||||
|
||||
#define USB3PHY_APP 0x00
|
||||
#define APP_FORCE_VBUS (0x3 << 12)
|
||||
|
||||
#define USB3PHY_PIPE_CLOCK_CONTROL 0x14
|
||||
#define PCC_PIPE_CLK_OPEN (1 << 6)
|
||||
|
||||
#define USB3PHY_PHY_TUNE_LOW 0x18
|
||||
#define PTL_MAGIC 0x0047fc87
|
||||
|
||||
#define USB3PHY_PHY_TUNE_HIGH 0x1c
|
||||
#define PTH_TX_DEEMPH_3P5DB (0x1F << 19)
|
||||
#define PTH_TX_DEEMPH_6DB (0x3F << 13)
|
||||
#define PTH_TX_SWING_FULL (0x7F << 6)
|
||||
#define PTH_LOS_BIAS (0x7 << 3)
|
||||
#define PTH_TX_BOOST_LVL (0x7 << 0)
|
||||
|
||||
#define USB3PHY_PHY_EXTERNAL_CONTROL 0x20
|
||||
#define PEC_REF_SSP_EN (1 << 26)
|
||||
#define PEC_SSC_EN (1 << 24)
|
||||
#define PEC_EXTERN_VBUS (0x3 << 1)
|
||||
|
||||
#define __LOWEST_SET_BIT(__mask) ((((__mask) - 1) & (__mask)) ^ (__mask))
|
||||
#define __SHIFTIN(__x, __mask) ((__x) * __LOWEST_SET_BIT(__mask))
|
||||
|
||||
static struct ofw_compat_data compat_data[] = {
|
||||
{ "allwinner,sun50i-h6-usb3-phy", 1 },
|
||||
{ NULL, 0 }
|
||||
};
|
||||
|
||||
static struct resource_spec aw_usb3phy_spec[] = {
|
||||
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
||||
{ -1, 0 }
|
||||
};
|
||||
|
||||
struct awusb3phy_softc {
|
||||
struct resource * res;
|
||||
regulator_t reg;
|
||||
int mode;
|
||||
};
|
||||
|
||||
/* Phy class and methods. */
|
||||
static int awusb3phy_phy_enable(struct phynode *phy, bool enable);
|
||||
static int awusb3phy_get_mode(struct phynode *phy, int *mode);
|
||||
static int awusb3phy_set_mode(struct phynode *phy, int mode);
|
||||
static phynode_usb_method_t awusb3phy_phynode_methods[] = {
|
||||
PHYNODEMETHOD(phynode_enable, awusb3phy_phy_enable),
|
||||
PHYNODEMETHOD(phynode_usb_get_mode, awusb3phy_get_mode),
|
||||
PHYNODEMETHOD(phynode_usb_set_mode, awusb3phy_set_mode),
|
||||
|
||||
PHYNODEMETHOD_END
|
||||
};
|
||||
DEFINE_CLASS_1(awusb3phy_phynode, awusb3phy_phynode_class, awusb3phy_phynode_methods,
|
||||
sizeof(struct phynode_usb_sc), phynode_usb_class);
|
||||
|
||||
#define RD4(res, o) bus_read_4(res, (o))
|
||||
#define WR4(res, o, v) bus_write_4(res, (o), (v))
|
||||
|
||||
static int
|
||||
awusb3phy_phy_enable(struct phynode *phynode, bool enable)
|
||||
{
|
||||
struct awusb3phy_softc *sc;
|
||||
device_t dev;
|
||||
uint32_t val;
|
||||
int error = 0;
|
||||
|
||||
dev = phynode_get_device(phynode);
|
||||
sc = device_get_softc(dev);
|
||||
|
||||
device_printf(dev, "%s: called\n", __func__);
|
||||
|
||||
if (enable) {
|
||||
val = RD4(sc->res, USB3PHY_PHY_EXTERNAL_CONTROL);
|
||||
device_printf(dev, "EXTERNAL_CONTROL: %x\n", val);
|
||||
val |= PEC_EXTERN_VBUS;
|
||||
val |= PEC_SSC_EN;
|
||||
val |= PEC_REF_SSP_EN;
|
||||
device_printf(dev, "EXTERNAL_CONTROL: %x\n", val);
|
||||
WR4(sc->res, USB3PHY_PHY_EXTERNAL_CONTROL, val);
|
||||
|
||||
val = RD4(sc->res, USB3PHY_PIPE_CLOCK_CONTROL);
|
||||
device_printf(dev, "PIPE_CONTROL: %x\n", val);
|
||||
val |= PCC_PIPE_CLK_OPEN;
|
||||
device_printf(dev, "PIPE_CONTROL: %x\n", val);
|
||||
WR4(sc->res, USB3PHY_PIPE_CLOCK_CONTROL, val);
|
||||
|
||||
val = RD4(sc->res, USB3PHY_APP);
|
||||
device_printf(dev, "APP: %x\n", val);
|
||||
val |= APP_FORCE_VBUS;
|
||||
device_printf(dev, "APP: %x\n", val);
|
||||
WR4(sc->res, USB3PHY_APP, val);
|
||||
|
||||
WR4(sc->res, USB3PHY_PHY_TUNE_LOW, PTL_MAGIC);
|
||||
|
||||
val = RD4(sc->res, USB3PHY_PHY_TUNE_HIGH);
|
||||
device_printf(dev, "PHY_TUNE_HIGH: %x\n", val);
|
||||
val |= PTH_TX_BOOST_LVL;
|
||||
val |= PTH_LOS_BIAS;
|
||||
val &= ~PTH_TX_SWING_FULL;
|
||||
val |= __SHIFTIN(0x55, PTH_TX_SWING_FULL);
|
||||
val &= ~PTH_TX_DEEMPH_6DB;
|
||||
val |= __SHIFTIN(0x20, PTH_TX_DEEMPH_6DB);
|
||||
val &= ~PTH_TX_DEEMPH_3P5DB;
|
||||
val |= __SHIFTIN(0x15, PTH_TX_DEEMPH_3P5DB);
|
||||
device_printf(dev, "PHY_TUNE_HIGH: %x\n", val);
|
||||
WR4(sc->res, USB3PHY_PHY_TUNE_HIGH, val);
|
||||
|
||||
if (sc->reg)
|
||||
error = regulator_enable(sc->reg);
|
||||
} else {
|
||||
if (sc->reg)
|
||||
error = regulator_disable(sc->reg);
|
||||
}
|
||||
|
||||
if (error != 0) {
|
||||
device_printf(dev,
|
||||
"couldn't %s regulator for phy\n",
|
||||
enable ? "enable" : "disable");
|
||||
return (error);
|
||||
}
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
awusb3phy_get_mode(struct phynode *phynode, int *mode)
|
||||
{
|
||||
struct awusb3phy_softc *sc;
|
||||
device_t dev;
|
||||
|
||||
dev = phynode_get_device(phynode);
|
||||
sc = device_get_softc(dev);
|
||||
|
||||
*mode = sc->mode;
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
awusb3phy_set_mode(struct phynode *phynode, int mode)
|
||||
{
|
||||
device_t dev;
|
||||
intptr_t phy;
|
||||
struct awusb3phy_softc *sc;
|
||||
|
||||
dev = phynode_get_device(phynode);
|
||||
phy = phynode_get_id(phynode);
|
||||
sc = device_get_softc(dev);
|
||||
|
||||
if (mode != PHY_USB_MODE_HOST)
|
||||
return (EINVAL);
|
||||
|
||||
sc->mode = mode;
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
awusb3phy_probe(device_t dev)
|
||||
{
|
||||
if (!ofw_bus_status_okay(dev))
|
||||
return (ENXIO);
|
||||
|
||||
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(dev, "Allwinner USB3PHY");
|
||||
return (BUS_PROBE_DEFAULT);
|
||||
}
|
||||
|
||||
static int
|
||||
awusb3phy_attach(device_t dev)
|
||||
{
|
||||
struct phynode *phynode;
|
||||
struct phynode_init_def phy_init;
|
||||
struct awusb3phy_softc *sc;
|
||||
clk_t clk;
|
||||
hwreset_t rst;
|
||||
phandle_t node;
|
||||
int error, i;
|
||||
|
||||
sc = device_get_softc(dev);
|
||||
node = ofw_bus_get_node(dev);
|
||||
|
||||
if (bus_alloc_resources(dev, aw_usb3phy_spec, &sc->res) != 0) {
|
||||
device_printf(dev, "cannot allocate resources for device\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
/* Enable clocks */
|
||||
for (i = 0; clk_get_by_ofw_index(dev, 0, i, &clk) == 0; i++) {
|
||||
error = clk_enable(clk);
|
||||
if (error != 0) {
|
||||
device_printf(dev, "couldn't enable clock %s\n",
|
||||
clk_get_name(clk));
|
||||
return (error);
|
||||
}
|
||||
}
|
||||
|
||||
/* De-assert resets */
|
||||
for (i = 0; hwreset_get_by_ofw_idx(dev, 0, i, &rst) == 0; i++) {
|
||||
error = hwreset_deassert(rst);
|
||||
if (error != 0) {
|
||||
device_printf(dev, "couldn't de-assert reset %d\n",
|
||||
i);
|
||||
return (error);
|
||||
}
|
||||
}
|
||||
|
||||
/* Get regulators */
|
||||
regulator_get_by_ofw_property(dev, node, "phy-supply", &sc->reg);
|
||||
|
||||
/* Create the phy */
|
||||
phy_init.ofw_node = ofw_bus_get_node(dev);
|
||||
phynode = phynode_create(dev, &awusb3phy_phynode_class,
|
||||
&phy_init);
|
||||
if (phynode == NULL) {
|
||||
device_printf(dev, "failed to create USB PHY\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
if (phynode_register(phynode) == NULL) {
|
||||
device_printf(dev, "failed to create USB PHY\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
return (error);
|
||||
}
|
||||
|
||||
static device_method_t awusb3phy_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, awusb3phy_probe),
|
||||
DEVMETHOD(device_attach, awusb3phy_attach),
|
||||
|
||||
DEVMETHOD_END
|
||||
};
|
||||
|
||||
static driver_t awusb3phy_driver = {
|
||||
"awusb3phy",
|
||||
awusb3phy_methods,
|
||||
sizeof(struct awusb3phy_softc)
|
||||
};
|
||||
|
||||
static devclass_t awusb3phy_devclass;
|
||||
/* aw_usb3phy needs to come up after regulators/gpio/etc, but before ehci/ohci */
|
||||
EARLY_DRIVER_MODULE(awusb3phy, simplebus, awusb3phy_driver, awusb3phy_devclass,
|
||||
0, 0, BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE);
|
||||
MODULE_VERSION(awusb3phy, 1);
|
@ -42,6 +42,7 @@ arm/allwinner/aw_spi.c optional aw_spi fdt
|
||||
arm/allwinner/aw_syscon.c optional aw_syscon ext_resources syscon fdt
|
||||
arm/allwinner/aw_thermal.c optional aw_thermal nvmem fdt
|
||||
arm/allwinner/aw_usbphy.c optional ehci aw_usbphy fdt
|
||||
arm/allwinner/aw_usb3phy.c optional xhci aw_usbphy fdt
|
||||
arm/allwinner/aw_wdog.c optional aw_wdog fdt
|
||||
arm/allwinner/axp81x.c optional axp81x fdt
|
||||
arm/allwinner/if_awg.c optional awg ext_resources syscon aw_sid nvmem fdt
|
||||
|
Loading…
Reference in New Issue
Block a user