Avoid to busy/unbusy a page in cases where there is no need to drop the
vm_obj lock, more nominally when the page is full valid after
vm_page_grab().
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
the mask of a cpuset. Also, change the cpuset's mask before updating the
masks of all children. Previously changing a cpuset's mask first required
setting the mask to a super-set of both the old and new masks and then
changing it a second time to the new mask.
- Split the bqlock into bqclean and bqdirty locks.
- Only acquire the wakeup synchronization locks when we cross a
threshold requiring them.
- Restructure the way flushbufqueues() targets work so they are more
smp friendly and sane.
Reviewed by: kib
Discussed with: mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
M vfs_bio.c
Now that I understand what's going on - and the RX antenna array maps
to what the receive LNA configuration actually is - I feel comfortable
in enabling this.
If people do have issues with this, there's enough debugging now available
that we have a chance to diagnose it without writing it up as 'weird
crap.'
Tested:
* AR9285 STA w/ diversity combining enabled in EEPROM
TODO:
* (More) testing in hostap mode
and controlling this form of antenna diversity) - print out the AR9285
antenna diversity configuration at attach time.
This will help track down and diagose if/when people have connectivity
issues on cards (eg if they connect a single antenna to LNA1, yet the
card has RX configured to only occur on LNA2.)
Tested:
* AR9285 w/ antenna diversity enabled in EEPROM;
* AR9285 w/ antenna diversity disabled in EEPROM; mapping only to a
single antenna (LNA1.)
from each batch flowing on the VALE switch
- feature: add glue for 'indirect' buffers on the sender side:
if a slot has NS_INDIRECT set, the netmap buffer contains pointer(s)
to the actual userspace buffers, which are accessed with copyin().
The feature is not finalised yet, as it will likely need to deal
with some iovec variant for proper scatter/gather support.
This will save one copy for clients (e.g. qemu) that cannot
use the netmap buffer directly.
A curiosity: on amd64 copyin() appears to be 10-15% faster than pkt_copy()
or bcopy() at least for sizes of 256 and greater.
the RX antenna field.
The AR9285/AR9485 use an LNA mixer to determine how to combine the signals
from the two antennas. This is encoded in the RSSI fields (ctl/ext) for
chain 2. So, let's use that here.
This maps RX antennas 0->3 to the RX mixer configuration used to
receive a frame. There's more that can be done but this is good enough
to diagnose if the hardware is doing "odd" things like trying to
receive frames on LNA2 (ie, antenna 2 or "alt" antenna) when there's
only one antenna connected.
Tested:
* AR9285, STA mode
for the RX path.
This is different to the div comb HAL flag, that says it actually
can use this for RX diversity (the "slow" diversity path implemented
but disabled in the AR9285 HAL code.)
Tested:
* AR9285, STA operation
swap_pager_copy() is invoked, otherwise there is no reason to do so.
This will eliminate the necessity to busy pages most of the times.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
sys/dev/mps/mps_user.c
Fix uninitialized memory reference in mps_read_config_page. It was
referencing a field (params->hdr.Ext.ExtPageType) that would only be
set when reading an Extended config page. The symptom was that
MPSIO_READ_CFG_PAGE ioctls would randomly fail with
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE errors. The solution is to
determine whether an extended or an ordinary config page is requested
by looking at the PageType field, which should be available regardless.
Similarly, mps_user_read_extcfg_header and mps_user_read_extcfg_page,
which call mps_read_config_page, had to be fixed to always set the
PageType field. They were implicitly assuming that
mps_read_config_page always operated on Extended pages.
Reviewed by: ken
Approved by: ken (mentor)
MFC after: 3 days
In order to become independent of Coherency Fabric frequency, configure
Timer and Watchdog to operate in 25MHz mode.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Copy the given range of mappings from the source map to the
destination map, thereby reducing the number of VM faults on fork.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Sponsored by: The FreeBSD Foundation, Semihalf
* Grab the reset lock first, so any subsequent interrupt, TX, RX work
will fail
* Then shut down interrupts
* Then wait for TX/RX to finish running
At this point no further work will be running, so it's safe to do the
reset path code.
PR: kern/179232
The main problem here is that fast and driver RX diversity isn't actually
configured; I need to figure out why that is. That said, this makes
the single-antenna connected AR9285 and AR2427 (AR9285 w/ no 11n) work
correctly.
PR: kern/179269
Uncover some, previously reserved, fields that are used by Ext4.
These are currently unused but it is good to have them for future
reference.
Reviewed by: bde
MFC after: 3 days
of a lock within a single thread.
- Fix handling of interlocks in WITNESS by properly requiring the interlock
to be held exactly once if it is specified.
the vnode lock while iterating over the free vnode list. Instead of
yielding, pause for 1 tick. The change is reported to help in some
virtualized environments.
Submitted by: Roger Pau Monn? <roger.pau@citrix.com>
Discussed with: jilles
Tested by: pho
MFC after: 2 weeks
Xen host side can handle after defragmentation.
This prevents the driver from throwing away too long TSO chains and
improves the performance on Amazon AWS instances with 10GigE virtual
interfaces to the normally expected throughput.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week
limited in the amount of data they can handle at once.
Drivers can set ifp->if_hw_tsomax before calling ether_ifattach() to
change the limit.
The lowest allowable size is IP_MAXPACKET / 8 (8192 bytes) as anything
less wouldn't be very useful anymore. The upper limit is still at
IP_MAXPACKET (65536 bytes). Raising it requires further auditing of
the IPv4/v6 code path's as the length field in the IP header would
overflow leading to confusion in firewalls and others packet handler on
the real size of the packet.
The placement into "struct ifnet" is a bit hackish but the best place
that was found. When the stack/driver boundary is updated it should
be handled in a better way.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week (using spare struct members to preserve ABI)
cacos, cacosf, cacosh, cacoshf,
casin, casinf, casinh, casinhf,
catan, catanf, catanh, catanhf,
logl, log2l, log10l, log1pl
I am hoping kargl@ will commit expl and expm1l soon, in which case this
bump will cover those, too.
Requested by: danfe
space, fork(2) would cause shadowing of the physical object and
copying of the shared page into private copy, effectively preventing
updates for the exported timehands structure and stopping the clock.
Specify the maximum allowed permissions for the page to be read and
execute, preventing write from the user mode.
Reported and tested by: <huanghwh@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
used as the estimation of size, to 32GB. This provides around 100K of
buffer headers and corresponding KVA for buffer map at the peak.
Sizing the cache larger is not useful, also resulting in the wasting
and exhausting of KVA for large machines.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
