The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
providers and consumers will be destroyed. Before take some actions
with a geom, check that it is not destroyed at the moment.
Tested by: nwhitehorn
MFC after: 1 week
o Detect when Boot Camp is enabled (i.e. the MBR mirrors the GPT).
o When Boot Camp is enabled, update the MBR whenever we write the GPT.
o Creation of a Boot Camp enabled GPT is not supported.
o Automatically disable Boot Camp when the GPT has been changed so that
there's either no EFI partition or no HFS+ partition.
o The first 4 partitions (by index) get mirrored in the MBR.
Requested by, discussed with and tested by: kris@pcbsd.org
MFC after: 1 week
This fixes the problem, when the secondary GPT header is not erased when
partition table destroyed. Move equal operations from g_part_gpt_create
and g_part_gpt_recover to the separate function g_gpt_set_defaults.
Reported by: dwhite
MFC after: 1 week
Remove message about non empty bootcode, we can not break something
while GEOM_PART_EBR_COMPAT is defined.
But without GEOM_PART_EBR_COMPAT any changes in EBR are allowed and we
can accidentally wipe the boot code. To do not break anything save
the first EBR chunk and keep it untouched each time when we are
changing EBR. Note that we are still not support boot code for EBR.
PR: kern/141235
MFC after: 1 month
disk drive. The boot0cfg(8) utility preserves these 4 bytes when is
writing bootcode to keep a multiboot ability.
Change gpart's bootcode method to keep DSN if it is not zero. Also
do not allow writing bootcode with size not equal to MBRSIZE.
PR: kern/157819
Tested by: Eir Nym
MFC after: 1 month
Since the only parameter that we check is size of bootcode, then
allow only two sizes: size of boot1 and size of /boot/boot.
This partially protects users from losing ability to boot if incorrect
bootcode is specified.
Requested by: ru
geometry and partitions may start from withing the first track.
If we found such partitions, then do not reserve space of the
first track, only first sector.
partition tables and lost an ability to boot after r221788.
Also unhide an error message from bootverbose, this would help to
easier determine the problem.
probed and read successfull, but it contains invalid values (e.g.
overlapped partitions, offset or size is out of bounds), then table
will be rejected.
MFC after: 1 month
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: silence on geom@ during 2 weeks
X-MFC after: to be determined in last commit with code from this project
EBR schemes: fat32, ebr, linux-data, linux-raid, linux-swap and
linux-lvm. Add bios-boot GUID and alias for the GPT scheme. It used by
GRUB 2 loader. Also do sorting definitions of types in diskmbr.h
and in g_part.c.
PR: bin/120990, kern/147664
MFC after: 2 weeks
and can prevent kernel memory exhausting when big value is specified
from command line.
Split reading and writing operation to several iteration to do not
trigger KASSERT when data length is greater than MAXPHYS.
PR: kern/144962, kern/147851
MFC after: 2 weeks
was specified incorrectly, causing the bzero to run past the end of a
malloc(9)'d object.
Submitted by: Eric Youngblut < eyoungblut AT isilon DOT com >
MFC after: 3 days
small non fatal inconsistency. EBR may contain boot loader and sometimes
it just has some garbage data. Now this does not prevent FreeBSD to use
extended partitions. But since we do not support bootcode for EBR we mark
tables which have non empty boot area as corrupt. This does make them
readonly and we can not damage this data.
PR: kern/141235
MFC after: 1 month
"arg0 'provider': Invalid argument" after creating new partition
table.
Move code for search of existing geom into g_part_find_geom
function and use this function instead of g_part_parm_geom
in g_part_ctl_create.
Approved by: kib (mentor)
This was needed for recover implementation.
Implement the recover command for GPT. Now GPT will marked as
corrupt when any of three types of corruption will be detected:
1. Damaged primary GPT header or table
2. Damaged secondary GPT header or table
3. Secondary header is not located in the last LBA
Marked GPT becomes read-only. Any changes with corrupt table
are prohibited. Only "destroy" and "recover" commands are allowed.
Discussed with: geom@ (mostly silence)
Tested by: Ilya A. Arhipov
Approved by: mav (mentor)
MFC after: 2 weeks
attribute (it should be allowed only to unset it), but for test purposes it
might be useful, so the current code allows it.
Reviewed by: arch@ (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
MFC after: 2 weeks
confusing.
Note there is still no information about 'partcode' being written to disk
(gpart bootcode -p <partcode> <disk>).
Maybe in the future all the messages printed by gpart(8) on success could be
hidden under -v?
PR: bin/150239
Reported by: Roddi <roddi@me.com>
Submitted by: arundel
MFC after: 2 weeks
understand everything correctly, we don't really need it.
- Provide default numeric value as strings. This allows to simplify
a lot of code.
- Bump version number.
do not constitute user-visible or active partitions and as such should
not prevent undoing pending operations.
While here, initialize the last usable sector for the placeholder geom
based on the null scheme, created to allow undoing the destruction of
a scheme. This gives consistent output with "gpart show".
Based on a patch from: "Andrey V. Elsukov" <bu7cher@yandex.ru>
zero stripeoffset in such case (as if device has no stripes), report offset
from the beginning of the media (as if device has single infinite stripe).
This gives partitioning tools information, required to guess better
partition alignment, in case if hardware doesn't report it's stripe size.
For example, it should give disklabel info about odd offset made by fdisk.
This fixes a null pointer dereference with "gpart create -s GPT" after
the previous commit.
Reported by: Yuri Pankov
Pointyhat to: me
MFC after: 1 week
It is valid for an on-disk GPT header to report a header size which is
greater than 92 bytes. Previously, we would read in the sector and copy
only the 92 bytes that we know how to deal with before calculating the
checksum for comparison. This meant that when we did the checksum, we
overshot the buffer and took in random memory, so the checksum would fail.
We now determine the size of the header and allocate enough space to
preserve the entire on-disk contents. This allows us to be correctly
calculate the checksum and be able to modify and write the header back
to the disk, while preserving data that we might not understand.
Reported by: Kris Weston
Approved by: marcel@
MFC after: 2 weeks
depend on on-disk metadata. This was we won't attach to providers that are used
by other classes. For example we don't want to configure partitions on da0 if
it is part of gmirror, what we really want is partitions on mirror/foo.
During regular work it works like this: if provider is open for writing a class
receives the spoiled event from GEOM and detaches, once provider is closed the
taste event is send again and class can rediscover its metadata if it is still
there. This doesn't work that way when new class arrives, because GEOM gives
all existing providers for it to taste, also those open for writing. Classes
have to decided on their own if they want to deal with such providers (eg.
geom_dev) or not (classes modified by this commit).
Reported by: des, Oliver Lehmann <lehmann@ans-netz.de>
Tested by: des, Oliver Lehmann <lehmann@ans-netz.de>
Discussed with: phk, marcel
Reviewed by: marcel
MFC after: 3 days
code that merely emits an error and waits for a key press before
rebooting. The error being that extended partitions are not
bootable. The origin is presumed to be Windows 2000; Windows XP
does not do this...
For now, ignore the first 96 bytes when checking that the EBR is
(for the most part) all zeroes.
Tested by: Mario Lobo <mlobo@digiart.art.br>
MFC after: 1 week
by CHS addressing. Don't define these fields as 0xff, but rather define
them correctly. This prevents boot problems on PCs where GPT is being
used.
PR: 115406
Submitted by: Kent Hauser <kent@khauser.net>
Approved by: re (kib)
is invalid because the ioctl happens without prior open. The ioctl
got introduced to provide backward compatibility for extended
partitions, but it ended up not being used because it didn't work
as expected. Since there are no consumers of the ioctl and the
implementation is broken, the best fix is to remove the code
entirely.
Spotted by: phk
Approved by: re (kensmith)
naming of the partitions (GEOM_PART_EBR_COMPAT). When
compatibility is enabled, changes to the partitioning are
disallowed.
Remove the device name aliasing added previously to provide
backward compatibility, but which in practice doesn't give
us anything.
Enable compatibility on amd64 and i386.
o PC98 uses 32-bit block numbers. Limit the scheme to 2^32-1
blocks when the media is larger. The 32-bit block numbers
are implicit (16-bit cylinder * 8-bit head * 8-bit sector).
o EBR uses 32-bit block numbers. Limit the scheme to 2^32-1
blocks when the media is larger.
o Calculate the number of entries based on the rounded media
size, rather than the raw media size.
o Don't create an APM scheme underneath another scheme when
the probe doesn't allow it.
o APM uses 32-bit block numbers. Limit the scheme to 2^32-1
blocks when the media is larger.
"raw" names. While there, change the formatting of extended MSDOS partitions
so that the dot (".") is not used to separate two numbers (which kind of
looks like the whole is a decimal number). Use "+" instead, which also
hints that the second part of the name is the offset from the start of
the partition in the first part of the name. Also change the offset from
decimal to hexadecimal notation, simply for aesthetic reasons and future
compatibility.
GEOM_PART is the default in 8-CURRENT but not yet in 7-STABLE so this
changeset can be MFC-ed without causing major problems from the second
part.
Reviewed by: marcel
Approved by: gnn (mentor)
MFC after: 2 weeks
properly. Otherwise the minimum of 1 is used and you can
only insert a single partition/slice and only at sector
0 (index 1).
o When adding a partition/slice, recalculate the index after
the start and size of the partition/slice are adjusted to
make them a multiple of the track size. Since the precheck
method sets the index based on the start of the partition
as provided by the user, we know that we're off by at most
1 and adjusting the index is safe.
1. Extend geom_dev by having it create the symlink (i.e. call
make_dev_alias) based on the DIOCGPROVIDERALIAS ioctl.
In this way the functionaility is generic and thus usable
by any geom/provider.
2. Have g_part handle said ioctl through the devalias method,
so that it's under control of the scheme itself. By design
the alias will not be created for newly added partitions.
method allows schemes to reject the ctl request, pre-check
the parameters and/or modify/set parameters. There are 2
use cases that triggered the addition:
1. When implementing a R/O scheme, deletes will still
happen to the in-memory representation. The scheme is
not involved in that operation. The pre-check method
can be used to fail the delete up-front. Without this
the write to disk will typically fail, but at that
time the delete already happened.
2. The EBR scheme uses a linked list to record slices.
There's no index. The EBR scheme defines the index
as a function of the start LBA of the partition. The
add verb picks an index for the range and then invokes
the add method of the scheme to fill in the blanks. It
is too late for the add method to change the index.
The pre-check is used to set the index up-front. This
also (silently) overrides/nullifies any (pointless)
user-specified index value.
found inside extended partitions and used to create logical partitions.
At this time write/modify support is not (yet) present.
The EBR and MBR schemes both check the parent scheme. The MBR will
back-off when nested under another MBR, whereas the EBR only nests
under a MBR.
underlying partitioning scheme.
o Put the start and end of the partition in the XML configuration.
The start and end are the LBAs of the first and last sector
(resp.) of the partition. They are currently identical to the
offset and size attributes, which describe the partition as an
offset and size in bytes, but may not in the future. The start
and end will be used for the logical partition boundaries and
may include metadata. The offset and size will always represent
the useful storage space within the partition. Typically these
two notions are the same, but for logical partitions in an
extended partition, the EBR is more naturally treated as being
part of the partition.
allowing the full 16-bit width of the corresponding fields in the
VTOC8 label to be used. The removed limits basically only held
true for providers labeled using the synthetic geometry provided
by cam_calc_geometry(9) but neither SCSI disks labeled with Solaris
nor sufficiently large ATA disks.
- Given that providers (originally) labeled with Solaris typically
use the native geometry as reported by the target while FreeBSD
typically uses a synthetic one put the message complaining about
mismatching geometries between what the label indicates and what
GEOM thinks the provider has, which we generally can't help,
under bootverbose in order to not unnecessarily scare users.
- For informational purposes add the non-matching values to the
message complaining about them, similar to what r186501 did for
g_part_bsd_read() except also indicating the origin of the
values.
- Make it clear that the messages emitted by this code refer to
the VTOC8 support rather than to another existing scheme or to
VTOC32.
o Don't check the dummy fields.
o The entry is unused if either dp_mid is 0 or dp_sid is 0.
o The start or end cylinder cannot be 0.
o The start CHS cannot be equal to the end CHS.
Submitted by: nyan
still valid. We were checking the state of the header and
not the table.
PR: 119868
Based on a patch from: Jaakko Heinonen <jh@saunalahti.fi>
MFC after: 1 week
a little refinement, but is good enough to commit as is.
# Should look to see if I should move swab(3) into the kernel or just
# provide the unoptimized routine here.
Reviewed by: marcel@
are possibly still being created. The d_secperunit field
contains the number of sectors of the disk and not of the
slice/partition to which the disklabel applies.
Rather than reject the disklabel, we now silently adjust
the field. Existing code, like bslabel(8), does not seem
to check the label that extensively and seems to adjust
fields as a side-effect as well.
In other words, it's not that important apparently, so
gpart should not be too strict about it.
Reported by: nyan@
Reported by: Andriy Gapon <avg@icyb.net.ua>
Export the active and bootable flags as attributes in
the configuration XML and allow them to be manipulated
with the set/unset commands.
Since libdisk treats the flags as part of the partition
type, preserve behavior by keeping them included in the
configuration text.
if the probe succeeds. This guarantees that the BSD scheme
wins over the MBR scheme when MBR gets to probe first. Build-
or link-time conditions can cause schemes to end up in the
linker set in a different order. Normally BSD is before MBR
in the linker set and as such get to probe first. But typically
when the kernel gets rebuild or relinked, this can change.
that a nested partition (typically the BSD disklabel)
is not done tasting while the root file system is being
mounted. While this is rare, it's still possible.
the method for the (indent == NULL) case (i.e. the kern.geom.conftxt
sysctl). The purpose is to extend the conftxt output with scheme-
specific fields which can be used by libdisk. In particular, have
the schemes dump the xs and xt fields, which contain the backward
compatible values for class type and partition type. This allows
libdisk to work with the legacy slicers as well as with gpart and
helps/promotes migration.
SI_SUB_DRIVERS) to avoid loading schemes before all the GEOM
classes have been loaded and initialized. Otherwise we may
end up using mutexes that haven't been initialized (due to
g_retaste() posting an event).
to declaring a proper module. The module event handler is part of the
gpart core and will add the scheme to an internal list on module load
and will remove the scheme from the internal list on module unload.
This makes it possible to dynamically load and unload partitioning
schemes.
not have VTOC information about the partitions, it will be created.
This is because the VTOC information is used for the partition type
and FreeBSD's sunlabel(8) does not create nor use VTOC information.
For this purpose, new tags have been added to support FreeBSD's
partition types.
partition table is empty, check to see if we have something that
looks sufficiently like a BPB. On non-i386 machines, the boot
sector typically doesn't contain boot code; the end of the boot
sector is all zeroes. This is also where the partition table is
for MBRs.
We only check the sector size and cluster size, as that seems to
be the most reliable across implementations, BPB versions and
platforms.
only because there's a partition table where the boot sector has
boot code. Boot sectors without boot code look like a MBR for all
practical purposes. This change adds a check for the partition table
and fails the probe when it's obvously invalid. The assumption being
that the sector contains a boot sector and not a MBR.
More checks are needed to distinguish a boot secto without boot code
from a (empty) MBR.
o BSD disklabels have relative offsets. Even for the BSD in MBR slice
setup, except when the mbroffset ioctl is supported. Since we don't
support that ioctl, bsdlabel(8) expects relative offsets. So, when
reading an existing disklabel, correct for disklabels that mistakenly
have the mbroffset offsets.
o Don't take the geometry seriously, because it's untrustworthy. We do
expect the numbers to be within range. This means that the secperunit
field will not be computed from secpercyl and ncyls, but simply is
the mediasize in sectors.
o Don't enforce partitions to be aligned to track boundaries. The
default label, constructed by bsdlabel(8), puts partition a at offset
BBSIZE bytes, which commonly means sector 16.