we can find another way to issue an #error, but using a preprocessed
assembler for that purpose and clobbering libc.a with an empty .o
just for the sake of #error reporting is way too much of a burden.
(size_t)(num * size) == 0
but both num and size are nonzero.
Reported by: Ilja van Sprundel
Approved by: jasone
Security: Integer overflow; calloc was allocating 1 byte in
response to a request for a multiple of 2^32 (or 2^64)
bytes instead of returning NULL.
The symptom is that syslog() fails to log anything but the "ident"
string if LOG_PERROR is specified to openlog(3) and the extensible
printf is in action.
For unclear, likely quaint historical reasons, syslog uses fwopen()
on a stack buffer, rather than using the more straightforward
and faster snprintf().
Along the way, fflush(3) is called, and since the callback writer
function returns zero instead of the length "written", __SERR
naturally gets set on the filedescriptor.
The extensible printf, in difference from the normal printf refuses
to output anything to an __SERR marked filedescriptor, and thus
the actual syslog message is supressed.
MFC: after 2 weeks
old resolver opened just one socket, BIND9's resolver may
open more than one sockets. And, BIND9's resolver doesn't
close the socket on timeout. So, we need this check.
Reported by: freebsd-cvs-src__at__oldach.net (Helge Oldach), bz
Hinted by: rwatson
integer. Presently, our implementation employs an approach that
converts the value to int64_t, then back to int, unfortunately,
this approach can be problematic when the the difference between
the two time_low is larger than 0x7fffffff, as the value is then
truncated to int.
To quote the test case from the original PR, the following is
true with the current implementation:
865e1a56-b9d9-11d9-ba27-0003476f2e88 < 062ac45c-b9d9-11d9-ba27-0003476f2e88
However, according to the DCE specification, the expected result
should be:
865e1a56-b9d9-11d9-ba27-0003476f2e88 > 062ac45c-b9d9-11d9-ba27-0003476f2e88
This commit adds a new intermediate variable which uses int64_t
to store the result of subtraction between the two time_low values,
which would not introduce different semantic of the MSB found in
time_low value.
PR: 83107
Submitted by: Steve Sears <sjs at acm dot org>
MFC After: 1 month
in rev. 1.34. Mainly I missed the fact that the buffer is used for two
purposes:
1) storing a group line from the group file;
2) __gr_parse_entry() parses the buffer and tries to put the group
members to the remaining part of the buffer and can fail if there
is no enough room for them.
Re-arrange the buffer size checks to account the latter case.
Submitted by: Kirk R Webb
MFC after: 2 weeks
well as avoiding a switch statement. This change has no significant impact
to performance when branch prediction is successful at predicting the sizes
of objects passed to free(), but in the case that the object sizes are
semi-random, this change has the potential to prevent many branch prediction
misses, thus improving performance substantially.
Take advantage of alignment guarantees in ipalloc(), and pad object sizes to
something less than a power of two when possible. This has the potential
to substantially reduce internal fragmentation for objects allocated via
posix_memalign().
Avoid an unnecessary pow2_ceil() call in arena_ralloc().
Submitted by: djam8193ah@hotmail.com
and instead creating a small allocation for each malloc(0) call. The
optional SysV compatibility behavior remains unchanged.
Add a couple of assertions.
Fix a couple of typos in error message strings.
The text is correct in the "DESCRIPTION" section, so fix "SYNOPSIS"
to use the correct name.
PR: docs/90498
Submitted by: Vasil Dimov
MFC after: 3 days
If the initial buffer size (1KB) for the given group line is not big
enough, reset the offset. It helps to do not miss this line when
getrg() reallocates the larger buffer and tries to parse the line again.
PR: bin/52433, kern/55031, bin/83696, misc/97640, misc/98111
Submitted by: bsw71@mail.ru, Philip M. Gollucci, Justin Erenkrantz
Glanced at: nectar
MFC after: 1 month
objects with SF_IMMUTABLE, SF_APPEND, or SF_NOUNLINK.
* Document that non-superusers cannot set or clear any SF_* flag
(setting fails with EPERM, clearing is silently ignored).
* Document that superusers cannot change any flag if one of
SF_IMMUTABLE, SF_APPEND, SF_NOUNLINK is set and securelevel is
greater than 0.
* Document SF_SNAPSHOT and note that it is maintained by the
system and is, for this reason, impossible to set to clear by
any user.
PR: docs/33877
Submitted by: harti
Help by: George Marsellis <gam9478@njit.edu>
MFC after: 1 week
4kB pages), in order to avoid dangerous rounding error when calculating
fullness limits during run promotion/demotion.
Convert a structure bitfield to a normal field in areana_run_t. This should
have been changed along with the other fields in revision 1.120.
bounds. [1]
Modify logic for utilizing the data segment, such that it is possible to
create huge allocations there.
Shrink the data segment when deallocating a chunk, if it is at the end of
the data segment.
Rename chunk_size to csize in huge_malloc(), in order to avoid masking a
static variable of the same name. [1]
Reported by: Paul Allen <nospam@ugcs.caltech.edu>
as well as add __sparc_utrap_install to FBSD_1.0; these are required by
the SCD libc 64 psABI and thus meant to be officially exported symbols.
- Remove the __fpu_* entries as well as the __sigtramp entry altogether as
these are internal to the libc FPU emulation and the signal trampoline
initialization in sigaction(2) respectively and thus don't need to be
externally visible.
- Add __sparc_utrap_setup to the list of FBSDprivate symbols as it's used
in src/lib/csu/sparc64/crt1.c to initialize the libc FPU emulation (I
think alternatively src/lib/csu/sparc64/crt1.c could be changed to use
__sparc_utrap_install instead, at the expense of increasing the size of
executables a bit).
- Add an entry for the vfork symbol to the FBSD_1 list and entries for it's
associated symbols generated by the RSYSCALL() macro to the FBSDprivate
list. There's some magic in place that automatically generates code for
vfork() if there's no explicit MD code for it so it might make sense to
move these symbols from the MD symbol map files to a MI one.
The last two changes make the libc symbol versioning useable on sparc64.
Ok'ed by: deischen
races. This isn't currently necessary for libpthread or libthr, but
without it external threads libraries like the linuxthreads port are
not safe to use.
Reported by: ganbold@micom.mng.net
have to be calculated once per allocator operation.
Make nil const.
Update various comments.
Remove/avoid division where possible.
For the one division operation that remains in the critical path, add a
switch statement that has a case for each small size class, and do division
with a constant divisor in each case. This allows the compiler to generate
optimized code that does not use hardware division [1].
Obtained from: peter [1]
this is used by some 3rd party applications when {e,f,g}cvt() are
not found. POSIX defines the xcvt() funtions but says they are
deprecated in favor or sprintf(). We'll import these functions
from OpenBSD and remove __gdtoa() from the exported interfaces
when libc version is bumped.
* Avoid choosing an arena until it's certain that an arena is needed
for allocation.
* Convert division/multiplication to bitshifting where possible.
* Avoid accessing TLS variables in single-threaded code.
* Reduce the amount of pointer dereferencing.
* Move lock acquisition in critical paths to only protect the the code
that requires synchronization, and completely remove locking where
possible.
uses them.
Now, we have res_nupdate and res_nmkupdate as well, but they are
still based on our old resolver for binary backward compatibility.
So, they don't provide new features such as TSIG support.
Reported by: pointyhat via kris
FBSDprivate locale symbols. These functions are needed by
libcompat.
Add _cleanup to the list of stdio FBSDprivate symbols. Some
third party applications use this. This will be removed and
replaced by fcloseall() once libc version is bumped.
Add _res to the list of resolv symbols.
Found by: portbuilder runs (thanks Kris!)
determine its value at run time according to other relevant values. This
avoids the creation of runs that are incompletely utilized, as long as
pagesize isn't too large (>32kB, given the current RUN_MIN_REGS_2POW
setting).
Increase the size of several structure bitfields in arena_run_t in order
to avoid integer overflow in the case that a run's header does not overlap
with the space that is usable as application allocation regions. Given
the tiny_min_2pow change, this fix has no additional impact unless
pagesize is >32kB.
Reported by: kris
internally used chunk to start at the beginning of the heap, rather
than at a chunk-aligned address. This reduces mapped memory somewhat
for 32-bit architectures.
Add the arena_run_link_t type and use it wherever a run object is only
used as a ring 'header'. This saves approximately 40 kB of memory per
arena.
Remove an obsolete (no longer used) code path from base_alloc(), which
supported the internal allocation of objects larger than the chunk
size.
Enhance chunk_dealloc() to cache chunk addresses for all deallocated
chunks. This has no impact for most programs, but has the potential
to reduce VM map fragmentation for programs that use huge
allocations.
documentation bug. We switched to page indexes some time around
FreeBSD 2.2. The actual 'len' limit is the maximum file size or what
will fit in your address space, whichever comes first. It should be
possible to make 1TB files on 32 bit systems, but of course address space
runs out long before then.
Since, res_sendsigned(3) and the friends use MD5 functions, it is
hard to include them without having MD5 functions in libc. So,
res_sendsigned(3) is not merged into libc.
Since, res_update(3) in BIND9 is not binary compatible with our
res_update(3), res_update(3) is leaved as is, except some
necessary modifications.
The res_update(3) and the friends are not essential part of the
resolver. They are not defined in resolv.h but defined in
res_update.h separately in BIND9. Further, they are not called from
our tree. So, I hide them from our resolv.h, but leave them only
for binary backward compatibility (perhaps, no one calls them).
Since, struct __res_state_ext is not exposed in BIND9, I hide it
from our resolv.h. And, global variable _res_ext is removed. It
breaks binary backward compatibility. But, since it is not used from
outside of our libc, I think it is safe.
Reviewed by: arch@ (no objection)
that no linear searching is necessary if we resort to allocating from a
run that is known to be mostly full. There are pathological edge cases
that could have caused severely degraded performance, and this change
fixes that.
close enough to each other that reallocation would allocate a new region
of the same size. This improves the performance of repeated incremental
reallocations by up to three orders of magnitude. [1]
Fix arena_new() to properly constrain run size if a small chunk size was
specified during runtime configuration.
Suggested by: se [1]
allocation patterns that involve a relatively even mixture of many
different size classes.
Reduce the chunk size from 16 MB to 2 MB. Since chunks are now carved up
using an address-ordered first best fit policy, VM map fragmentation is
much less likely, which makes smaller chunks not as much of a risk. This
reduces the virtual memory size of most applications.
Remove redzones, since program buffer overruns are no longer as likely to
corrupt malloc data structures.
Remove the C MALLOC_OPTIONS flag, and add H and S.
disabled by default; add SYMVER_ENABLED=true to /etc/make.conf
to enable it. libc should get a version bump before this is
enabled by default.
Reviewed by: davidxu
Staticize two tables thare are not visible in <resolv.h>
and which are also local in Solaris' libresolv.
Remove two functions that are not referenced in libc nor
anywhere else I can find, not visible in <resolv.h> and
which are also local in Solaris libresolv.
Remove the block of code that tries to use delayed regions in LIFO order,
since from a policy perspective, it conflicts with LRU caching of newly
coalesced regions in arena_undelay(). There are numerous policy
alternatives, and it isn't readily obvious which (if any) is superior;
this change at least has the virtue of being consistent with policy.
Add %M{essage} extension which prints an errno value as the
corresponding string if possible or numerically otherwise.
It is not currently possible to do the syslog(3) like %m extension
because errno would need to get capatured on entry to the first
function in the printf family, so %M requires you to supply errno
as an argument.
Add %Q{uote} extension which will print a string in double quotes with
appropriate back-slash escapes (only) if necessary.
fit regions are available, use the delayed regions in LIFO order, in order
to increase locality of reference. We might expect this to cause delayed
regions to be removed from the delay ring buffer more often (since we're
now re-using more recently buffered regions), but numerous tests indicate
that the overall impact on memory usage tends to be good (reduced
fragmentation).
Re-work arena_frag_reg_alloc() so that when large free regions are
exhausted, it uses small regions in a way that favors contiguous allocation
of sequentially allocated small regions. Use arena_frag_reg_alloc() in
this capacity, rather than directly attempting over-fitting of small
requests when no large regions are available.
Remove the bin overfit statistic, since it is no longer relevant due to
the arena_frag_reg_alloc() changes.
Do not specify arena_frag_reg_alloc() as an inline function. It is too
large to benefit much from being inlined, and it is also called in two
places, only one of which is in the critical path (the other call bloated
arena_reg_alloc()).
Call arena_coalesce() for a region before caching it with
arena_mru_cache().
Add assertions that detect the attempted caching of adjacent free regions,
so that we notice this problem when it is first created, rather than in
arena_coalesce(), when it's too late to know how the problem arose.
Reported by: Hans Blancke
behaviour of returning EINVAL when ".." is passed as either argument
has been restored.
rmdir("..") now returns EINVAL instead of EPERM. Document the
previously undocumented behaviour of rmdir(".") returning EINVAL
as required by POSIX and SUSv3. Bump the man page change date.
undelete("..") now returns EINVAL instead of EPERM. Bump the man
page change date.
MFC after: 3 days
problems in cases where regions are faked up for the purposes of red-black
tree searches, since those faked region headers reside on the stack, rather
than in a malloc chunk.
allowing the error to be fatal.
Move a label in order to make sure to properly handle errors in malloc(0).
Reported by: Alastair D'Silva, Saneto Takanori
there is never any need to recursively call the main allocation functions.
Remove recursive spinlock support, since it is no longer needed.
Allow chunks to be as small as the page size.
Correctly propagate OOM errors from arena_new().
broken for non-threaded shared processes in that __tls_get_addr()
assumes the thread pointer is always initialized. This is not the
case. When arenas_map is referenced in choose_arena() and it is
defined as a thread-local variable, it will result in a SIGSEGV.
PR: ia64/91846 (describes the TLS/ia64 bug).
* Add posix_memalign().
* Move calloc() from calloc.c to malloc.c. Add a calloc() implementation in
rtld-elf in order to make the loader happy (even though calloc() isn't
used in rtld-elf).
* Add _malloc_prefork() and _malloc_postfork(), and use them instead of
directly manipulating __malloc_lock.
Approved by: phk, markm (mentor)
While we don't use the NC_BROADCAST value of nc_flag anywhere in the
RPC code, it is parseable by getnetconfigent(3) from /etc/netconfig.
o Clean up some "see below"'s that were cut and pasted from netconfig.h.
between a 32-bit integer and a radix-64 ASCII string. The l64a_r() function
is a NetBSD addition.
PR: 51209 (based on submission, but very different)
Reviewed by: bde, ru
to be compatible with symbol versioning support as implemented by
GNU libc and documented by http://people.redhat.com/~drepper/symbol-versioning
and LSB 3.0.
Implement dlvsym() function to allow lookups for a specific version of
a given symbol.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
on probationary terms: it may go away again if it transpires it is
a bad idea.
This extensible printf version will only be used if either
environment variable USE_XPRINTF is defined
or
one of the extension functions are called.
or
the global variable __use_xprintf is set greater than zero.
In all other cases our traditional printf implementation will
be used.
The extensible version is slower than the default printf, mostly
because less opportunity for combining I/O operation exists when
faced with extensions. The default printf on the other hand
is a bad case of spaghetti code.
The extension API has a GLIBC compatible part and a FreeBSD version
of same. The FreeBSD version exists because the GLIBC version may
run afoul of our FILE * locking in multithreaded programs and it
even further eliminate the opportunities for combining I/O operations.
Include three demo extensions which can be enabled if desired: time
(%T), hexdump (%H) and strvis (%V).
%T can format time_t (%T), struct timeval (%lT) and struct timespec (%llT)
in one of two human readable duration formats:
"%.3llT" -> "20349.245"
"%#.3llT" -> "5h39m9.245"
%H will hexdump a sequence of bytes and takes a pointer and a length
argument. The width specifies number of bytes per line.
"%4H" -> "65 72 20 65"
"%+4H" -> "0000 65 72 20 65"
"%#4H" -> "65 72 20 65 |er e|"
"%+#4H" -> "0000 65 72 20 65 |er e|"
%V will dump a string in strvis format.
"%V" -> "Hello\tWor\377ld" (C-style)
"%0V" -> "Hello\011Wor\377ld" (octal)
"%+V" -> "Hello%09Wor%FFld" (http-style)
Tests, comments, bugreports etc are most welcome.
allocate a memory block. sscanf calls __svfscanf which in turn calls
fread, fread triggers mutex initialization but the mutex is not
destroyed in sscanf, this leads to memory leak. To avoid the memory
leak and performance issue, we create a none MT-safe version of fread:
__fread, and instead let __svfscanf call __fread.
PR: threads/90392
Patch submitted by: dhartmei
MFC after: 7 days
For some denormalized long double values, a bug in __hldtoa() (called
from *printf()'s %A format) results in a base 16 digit being rounded
up from 0xf to 0x10.
When this digit is subsequently converted to string format, an index
of 10 reaches past the end of the uppper-case hex/char array, picking
up whatever the code segment happen to contain at that address.
This mostly seem to be some character from the upper half of the
byte range.
When using the %a format instead of %A, the first character past
the end of the lowercase hex/char table happens to be index 0 in
the uppercase hex/char table hextable and therefore the string
representation features a '0', which is supposedly correct.
This leads me to belive that the proper fix _may_ be as simple as
masking all but the lower four bits off after incrementing a hex-digit
in libc/gdtoa/_hdtoa.c:roundup(). I worry however that the upper
bit in 0x10 indicates a carry not carried.
Until das@ or bde@ finds time to visit this issue, extend the
hexdigit arrays with a 17th index containing '?' so that we get a
invalid but consistent and printable output in both %a and %A formats
whenever this bug strikes.
This unmasks the bug in the %a format therefore solving the real
issue may both become easier and more urgent.
Possibly related to: PR 85080
With help by: bde@
Switch strncpy to strlcpy suggested by gad and issue found by pjd.
Add to uname(3) man page describing:
UNAME_s
UNAME_r
UNAME_v
UNAME_m
Add to getosreldate(3) man page describing:
OSVERSION
Submitted by: ru, pjd/gad
Reviewed by: ru (man pages)
FreeBSD machine. To do this add the man 1 uname changes to __xuname.c
so we can override the settings it reports. Add OSVERSION override
to getosreldate. Finally which Makefile.inc1 to use uname -m instead
of sysctl -n hw.machine_arch to get the arch. type.
With these change you can put a complete FreeBSD OS image into a
chroot set:
UNAME_s=FreeBSD
UNAME_r=4.7-RELEASE
UNAME_v="FreeBSD $UNAME_r #1: Fri Jul 22 20:32:52 PDT 2005 fake@fake:/usr/obj/usr/src/sys/FAKE"
UNAME_m=i386
UNAME_p=i386
OSVERSION=470000
on an amd64 or i386 and it just work including building ports and using
pkg_add -r etc. The caveat for this example is that these patches
have to be applied to FreeBSD 4.7 and the uname(1) changes need to
be merged. This also addresses issue with libtool.
This is usefull for when a build machine has been trashed for an
old release and we want to do a build on a new machine that FreeBSD
4.7 won't run on ...
other systems it prevents a tty from becoming a controlling tty on the
open. O_SYNC is the POSIX name for O_FSYNC.
The Markup Police may need to tweak my references to standards.
define also, but res_config.h was not included into libc/net/name6.c.
So getipnodebyaddr() ignored the multiple PTRs.
PR: kern/88241
Submitted by: Dan Lukes <dan__at__obluda.cz>
MFC after: 3 days
Change first MAXPATHLEN to more standard PATH_MAX
Change second MAXPATHLEN to 1024 (it is temp buffer not related)
Change comment to reflect that.
Suggested by: bde
just use MAXPATHLEN. It prevents potential buffer overflow with other
malloc implementations.
(this change based on submitted patch)
PR: 86135
Submitted by: Trevor Blackwell <tlb@tlb.org>
