Commit Graph

135 Commits

Author SHA1 Message Date
Gavin Atkinson
4c631db3cc Fix several panics when initialization of an ISA or PC-CARD device fails:
o  Assign sc->an_dev in an_probe() (which isn't really a probe function in
   the standard newbus sense) as we may need it for printing errors.
o  Use device_printf() rather than if_printf() in an_reset() - this is
   called from an_probe() long before the ifp structure is initialised
   in an_attach().
o  Initialize the ifp structure early in an_attach() as we use if_printf()
   in cases where allocation of descriptors etc fails.

MFC after:	3 days
2013-12-14 18:49:59 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Kevin Lo
ee6eac62f7 Remove duplicate header includes 2011-06-28 08:36:48 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
John Baldwin
6d60ecdc6c - For 350 chips, don't set various INTR bits in TX control word; turning INTR
bits on seems to confuse hardware TX engine.
- For 350 chips, set TX desc's buffer physical address before turning on the
  TX desc valid bit.

Submitted by:	Jeremy O'Brien  obrien654j | gmail, sephe
Obtained from:	DragonFly BSD
2009-11-24 16:57:35 +00:00
John Baldwin
08f85872d3 Use bus_*() rather than bus_space_*(). 2009-11-24 16:54:54 +00:00
John Baldwin
3be4af9213 - Locking fixes to not do silly things like drop the lock only to call a
function that immediately reacquires the lock.  Also removes recursive
  locking.
- Use the statistics timer to drive the transmit watchdog instead of using
  if_watchdog and if_timer.

Tested by:	gavin
2009-11-10 22:04:19 +00:00
John Baldwin
775a636b11 - Use device_printf() instead of printf() with an explicit unit number
in the PCI attach routine.
- Simplify PCI probe.
- Remove no-longer-used 'unit' from an_attach() parameters.

PR:		kern/126924
Submitted by:	gavin
2009-11-06 18:28:13 +00:00
John Baldwin
f1b211841d Use device_printf() and if_printf() instead of printf() with an explicit
unit number and remove 'unit' members from softc.
2009-11-06 14:52:37 +00:00
Warner Losh
56e63ed738 Shutdown routine returns int. 2009-02-04 20:39:45 +00:00
Bjoern A. Zeeb
994d867cf7 In case INET is not defined, then ANCACHE is not defined and
the sc does not have 'an_have_rssimap' variable.
Add an ANCACHE check to poperly hide the case and make an(4)
compile without INET.

MFC after:	2 months
2008-11-06 08:55:46 +00:00
Doug Ambrisko
ecefd670f5 Style changes from avatar.
Submitted by:	avatar
2008-01-18 16:34:18 +00:00
Doug Ambrisko
f0e1e8d9fb First real attempt at proper locking. The locking is a little complicated
since the the command and data that is being built to be sent to or read
from the HW lives in the softc.  Commands are later run via an_setdef etc.
In the ioctl path various references are kept to the data stored in
the softc so it needs to be protected.  Almost think of the command
in the softc a global variable since it essentially is.  Since locking
wasn't done in this type of context the commands would get corrupted.

Thanks to avatar@ for catching some lock issues and dhw@ for testing.

Things are a lot more stable except for the MPI-350 cards.  My an(4)
remote laptop stays on the network now.

The driver should be changed so that it uses private memory that is passed
to the functions that talk to the card.  Then only those functions would
really need to grab locks.

Reviewed by:	avatar@
2008-01-18 16:31:24 +00:00
Tai-hwa Liang
8c81b154da MFP4(129048): Eliminating an unnecessary check on an_gone inside
an_stats_update() since a properly locked callout_stop(9) does do the
right thing.

Reviewed by:	ambrisko, jhb
MFC after:	3 days
2007-11-27 08:29:24 +00:00
Tai-hwa Liang
6404b10238 MFP4(128855, 129015):
- Trying to eliminate another racing by replacing the timeout(9) with
  callout APIs.  In addition to that, the callout_drain() in an_detach()
  help us to avoid a possible panic-on-free due to the callout API tries
  to lock a destroyed mutex.
- In an_stats_update(), check the return value of an_read_record(). This
  should reduce the chance of device removal(PCCARD) panic [2].
- Adding a comment to state the fact that an_stats_update() is now called
  via callout(9) with a lock held [2].

Submitted by:	jhb [1], ambrisko [2]
Reviewed by:	jhb, ambrisko
Reported by:	dhw
Tested by:	dhw
MFC after:	3 days
2007-11-16 11:22:18 +00:00
Tai-hwa Liang
73474451b9 Fixing invalid channel display in ifconfig(8) by implementing required
ioctl().

Note that other information provided by ifconfig(8) such like "list chan"
or "list ap" are still not available at this moment.

Before an(4) is connected to wlan(4), users are encouraged to use
ancontrol(8) to retrieve aforementioned information.

Reported by:	dhw (http://lists.freebsd.org/pipermail/freebsd-current/2007-July/074848.html)
Reviewed by:	ambrisko
Tested by:	dhw
Approved by:	re (bmah)
2007-09-10 12:53:34 +00:00
Tai-hwa Liang
07b6a9bed8 MFP4(123687): Closing another LOR by dropping the driver lock around calls
to if_input().

Reviewed by:	ambrisko
Tested by:	dhw
Approved by:	re (kensmith)
2007-08-07 12:26:19 +00:00
Tai-hwa Liang
d28ab8736f MFP4(123686): Fixing various ancontrol(8) related panics by dropping locks
around copyin()/copyout().

Reviewed by:	sam, thompsa
Tested by:	dhw
Approved by:	re (kensmith)
2007-08-02 02:20:19 +00:00
Matt Jacob
2342e96586 Remove assignment to uninitialized variable that wasn't then used anyway. 2007-06-08 01:21:20 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Warner Losh
ccc0f2f0af Silence the strict-alias warnings. Make a trip through (void *) when
casting a structure to a uint32_t *.  Many drivers in the tree do this, but
I'll not update them until these changes can be reviewed by the pedantic
standards folks.
2006-02-04 22:51:03 +00:00
Nate Lawson
c74da55a0e Since the A-Z range is contained in the previous check, the else-if is
dead code.  Clean up both by using isprint() instead, since that's what
it really wants.

Coverity ID:	100
Found by:	Coverity Prevent
2006-01-26 19:55:29 +00:00
Robert Watson
f0ee42d0f1 Don't leak mbufs and mbuf clusters in several error-handling situations
in the if_an receive routine.

Found with:	Coverity Prevent (tm)
MFC after:	1 week
2006-01-15 12:09:03 +00:00
Robert Watson
63e0298298 If frame length is excessive, don't leak an mbuf and cluster when
abandoning processing.

Found with:	Coverity Prevent (tm)
MFC after:	1 week
2006-01-15 12:06:09 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Ruslan Ermilov
d09ed26fd8 - Make IFP2ENADDR() a pointer to IF_LLADDR() rather than another
copy of Ethernet address.

- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
  address as an argument, similar to ether_ifattach(), to make
  this work.
2005-11-11 07:36:14 +00:00
Warner Losh
09ec45fd15 MFp4: Remove OLDCARD shims 2005-09-22 04:51:11 +00:00
Warner Losh
b1d1a29cf6 MFp4: trivial KNF nits 2005-09-22 04:49:17 +00:00
Warner Losh
2a5481cafd MFp4: KNF (mostly remove K&R function definitions). Fix some spaces left
over from de__Ping.

# Didn't fix the -Exxxx return statements that appaer to be linuxisms
# (and wrong) since I don't have hardware to test with.
2005-09-22 04:46:56 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Warner Losh
c2e94196e3 Minor style nits. 2005-08-03 15:07:14 +00:00
Maksim Yevmenkin
c20990577c Do not lock an to check gone flag. Only need to hold the lock to set
the gone flag.

Reviewed by:	imp
MFC after:	1 day
2005-08-02 16:03:51 +00:00
Maksim Yevmenkin
8a03cf5c82 Reorganize an_detach() a bit. Make sure ether_ifdetach() and if_free()
are called outside of AN_LOCK()/AN_UNLOCK. This fixes the following
WITNESS warning (produced when an(4) PCMCIA card is detached).

taskqueue_drain with the following non-sleepable locks held:
exclusive sleep mutex an0 (network driver) r = 0 (0xc59af168) locked @ /usr/src/sys/dev/an/if_an.c:2836

MFC after:	3 days
Silence from:	current@
2005-07-27 21:03:35 +00:00
Warner Losh
ab581af779 Eliminate unused argument in PCMCIA_CARD macro.
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.

Approved by: re (dwhite)
2005-06-24 14:36:54 +00:00
Xin LI
2d0d7ca29f Initialize sc->an_ifp when doing if_alloc(). This prevents an(4)
from being panic when attaching.

Approved by:	re (scottl)
2005-06-14 14:50:40 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Sam Leffler
8f593c02c3 check copyin/copyout return values
Noticed by:	Coverity Prevent analysis tool
2005-03-28 17:52:12 +00:00
Warner Losh
53ee71735f Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 19:06:12 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Max Laier
154b8df2ed Second part of ALTQ driver modifications, covering:
an(4), ath(4), hme(4), ndis(4), vr(4) and wi(4)

Please help testing: http://people.freebsd.org/~mlaier/ALTQ_driver/

Tested by:	Vaidas Damosevicius (an, ath, wi)
		Roman Divacky (vr)
Submitted by:	yongari (hme)
2004-08-01 23:58:04 +00:00
Doug Ambrisko
6cca5e3463 While setting up a transmit packet disable interupts on the card then
re-enable them after we are done setting up the packet.  This seems
to fix the MPI350 newer firmware hangs.
2004-06-17 02:19:11 +00:00