and device npx.
This means that FPU is always initialized and handled when available,
and SSE+ register file and exception are handled when available. This
makes the kernel FPU code much easier to maintain by the cost of
slight bloat for CPUs older than 25 years.
CPU_DISABLE_CMPXCHG outlived its usefulness, see the removed comment
explaining the original purpose.
Suggested by and discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
The quiet time counter update is happening each time the IE is added,
which also means it happens for each quiet time IE addition to the probe
response.
Only update the countdown if we request ie (ie, beacon updates.)
This corresponds to the following illumos issues:
5755 want support for Intel FMA instrs
5756 want support for Intel BMI1 instrs
5757 want support for Intel BMI2 instrs
5758 want support for Intel AVX2 instrs
7204 Want broadwell rdseed and adx support
7208 Want stac/clac disasm support
7733 Need SHA Instruction dis support
7756 dis can't handle x86 SSE 3 instructions
7757 want avx2 disasm tests
7758 want SSE 4.1 disasm tests
MFC after: 2 weeks
Some PCI-e bridges report that they support HotPlug in the slot
capabilities but do not report support for Data Layer Active events
in the link capabilities register. These bridges do not work correctly
when HotPlug is used. Further, while the description of HotPlug in
the spec does not mention that DL active events are required, the
description of the link capabilities register says that DL active is
required for HotPlug. Thanks to Dave Baukus for finding that language
in the spec.
PR: 211699
Submitted by: Dave Baukus <daveb@spectralogic.com>
Reviewed by: vangyzen
MFC after: 3 days
* flesh out a "get default DFS parameters" routine
* remove the stub that returns NULL
* fix up the enable DFS method to do what FreeBSD does - specifically, allow pe_enabled
to be set/cleared.
This allows the radar pulse reporting code to function, but it doesn't yet
do anything useful.
- Use new option SMP_ON_UP instead of (mis)using specific CPU type.
By this, any SMP kernel can be compiled with SMP_ON_UP support.
- Enable runtime detection of CPU multiprocessor extensions only
if SMP_ON_UP option is used. In other cases (pure SMP or UP),
statically compile only required variant.
- Don't leak multiprocessor instructions to UP kernel.
- Correctly handle data cache write back to point of unification.
DCCMVAU is supported on all armv7 cpus.
- For SMP_ON_UP kernels, detect proper TTB flags on runtime.
Differential Revision: https://reviews.freebsd.org/D9133
Commit r312743 ("Use SoC ID - based detection in CESA") resulted
in build failing for Marvell armv5 platforms, which don't support
the newer version of CESA controller. This patch provides a fix by
removing ifdefs around bitfields' definitions, so that they are
known to all platforms.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
* add debugging
* disable the manual noise floor calibration and tracking done by the HAL;
this interferes with the normal calibration path and will lock up the RX
side
* don't program short report / priority if they're provided as NOVAL.
An incorrect output specifier was used which worked with clang by accident,
but breaks with the in-tree gcc version.
While here plug a whitespace nit.
Reported by: bde
Historically AM335x LCDC driver used non-standard "hdmi" property to
refer to HDMI framer. There is no such thing in upstream DTS, so to
handle both cases fallback to bindings described in
bindings/media/video-interfaces.txt in Linux documentation.
We still make some assumptions that are not universally true: we
assume that if remote endpoint is available it's going to be HDMI
framer. Which is true for AM335x-based devices currently supported
but may be not true for some custom hardware.
MFC after: 1 week
The disk_* and part_* api is using 64bit values for media size and
offsets. However, the current api is using off_t type, which is signed
64-bit int.
In this context the signed media size does not make any sense, and
the offsets are used to mark absolute, not relative locations.
Also, the data from GPT partition table and some other sources is
already using uint64_t data type, so using signed off_t can cause sign
issues.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D8710
for EVFILT_READ at the point of the check not when the event is registers.
This fixes a problem with asio when accepting a connection.
Reviewed by: kib@, Scott Mitchell
Since we have dedicated libefi/env.c file for variable support, the following
changes are done:
Simple cstyle changes in env.c
Moved efi variable related commands from loader/main.c to libefi/env.c
Did create function to set "efi-version" environment variable in env.c.
This function does serve two purposes: for first a small clean up of the
loader main(), and for second, it does replace the otherwise unused
efi_variable_support hack.
A bit of cleanup of ficl backend functions. The TEST_MAIN has no meaning,
and removed few memory leaks.
The forth code is updated to use "efi-version" variable, instead of ficl
environment check.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D9165
atomic_fcmpset_*() is analogous to atomic_cmpset(), but saves off the
read value from the target memory location into the 'old' pointer.
Reviewed by: imp, brooks
Requested by: mjg
Differential Revision: https://reviews.freebsd.org/D9391
Freescale added the E.D profile to e500mc and derivative cores. From
Freescale's EREF reference manual this is enabled by a bit in HID0 and should
otherwise default to traditional debug. However, none of the Freescale cores
support that bit, and instead always use E.D. This results in kernel panics
using the standard debug on e500mc+ cores.
Enhanced debug allows debugging of interrupts, including critical interrupts,
as it uses a different save/restore registers (srr*). At this time we don't use
this ability, so instead share the core of the debug handler code between both
handlers.
MFC after: 3 weeks
space available for chunks. This unbreaks the handling of
ICMPV6 packets indicating "packet too big". It just worked
for IPv4 since we are overbooking for IPv4.
MFC after: 1 week
Flags
- IEEE80211_F_ASCAN
- IEEE80211_F_SIBSS
- IEEE80211_F_IBSSON
are not used since r170530 (old WI compatibility ioctls removal)
and r178354 (removed from other places).
IEEE80211_F_TXPOW_FIXED was never utilized; initially added with
IEEE80211_F_TXPOW_AUTO / IEEE80211_F_TXPOW_OFF flags,
which were replaced with IEEE80211_C_TXPMGT capability check in r138568.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9369
- Check for Chelsio vendor ID in probe routines.
- Fail attach instead of faulting if pci_find_dbsf() doesn't find a
device.
PR: 216539
Reported by: asomers
Tested by: Dave Baukus <daveb@spectralogic.com>
MFC after: 3 days
Sponsored by: Chelsio Communications
structure:
if_gethwtsomax(), if_sethwtsomax() - if_hw_tsomax
if_gethwtsomaxsegcount(), if_sethwtsomaxsegcount() - if_hw_tsomaxsegcount
if_gethwtsomaxsegsize(), if_sethwtsomaxsegsize() - if_hw_tsomaxsegsize
Update em and vnic drivers which had already been coverted to use accessor
functions for the other ifnet structure members.
Reviewed by: erj
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8544
of their sys_*() counterparts. The svr4 is left unchanged.
Reviewed by: kib@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9379
The desired behavior of atomic_fcmpset_() is to always exit on error. Instead
of retrying on lost reservation, leave the retry to the caller, and return
error.
Reported by: kib
Derived from an implementation by Mark Adler.
The fast loop performs three simultaneous CRCs over subsets of the data
before composing them. This takes advantage of certain properties of
the CRC32 implementation in Intel hardware. (The CRC instruction takes 1
cycle but has 2-3 cycles of latency.)
The CRC32 instruction does not manipulate FPU state.
i386 does not have the crc32q instruction, so avoid it there. Otherwise
the implementation is identical to amd64.
Add basic userland tests to verify correctness on a variety of inputs.
PR: 216467
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: kib@, markj@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9342
* Clang/llvm does not (yet) support -m(no-)spe, so make it gcc-only
* Clang now supports -msoft-float, and does not appear to recognize
"-disable-ppc-float-in-variadic", which appears to have been a crutch until
soft-float was implemented. It's now implemented for both 32- and 64-bit.
* Clang/llvm use a 'medium' code model by default for powerpc64, supporting up
to 4GB TOC, and does not support the '-mminimal-toc' option. Given both of
these, make -mminimal-toc gcc-only.
MFC after: 2 weeks
Ideally we'd have a top level hwpmc module with the shared bits, then
cpu specific glue as needed. However, on the MIPS side, there's no
probe code - {mips24k, mips74k, octeon} implement a set of methods
that hwpmc_mips.c expects.
So this populates separate modules with duplicate code.
Ew, but it does work.
This gets me off the hook - these work fine as copied into the relevant
mfsroot for mips24k/mips74k systems.
TODO:
* do it the "right" way in the future. Note that modules/hwpmc/ does
build fine on MIPS, it jusn't DO anything. So it'd be nice to
maybe call that "hwpmc_core" and then "hwpmc" can be the CPU/arch glue.
Thought it's difficult to reproduce, I think this variable was responsible
for a use-after-free panic when a SATA disk timed out responding to a SATA
identify command during boot.
Submitted by: slm
Reviewed by: slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9364
