SOCK_LOCK(so):
- Hold socket lock over calls to MAC entry points reading or
manipulating socket labels.
- Assert socket lock in MAC entry point implementations.
- When externalizing the socket label, first make a thread-local
copy while holding the socket lock, then release the socket lock
to externalize to userspace.
The uidinfo code appears to be MPSAFE, and is referenced without Giant
elsewhere. While this grab of Giant was only made in fairly rare
circumstances (actually GC'ing on refcount==0), grabbing Giant here
potentially introduces lock order issues with any locks held by the
caller. So this probably won't help performance much unless you change
credentials a lot in an application, and leave a lot of file descriptors
and cached credentials around. However, it simplifies locking down
consumers of the credential interfaces.
Bumped into by: sam
Appeased: tjr
and the mpo_create_cred() MAC policy entry point to
mpo_copy_cred_label(). This is more consistent with similar entry
points for creation and label copying, as mac_create_cred() was
called from crdup() as opposed to during process creation. For
a number of policies, this removes the requirement for special
handling when copying credential labels, and improves consistency.
Approved by: re (scottl)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
to see_other_uids but with the logical conversion. This is based
on (but not identical to) the patch submitted by Samy Al Bahra.
Submitted by: Samy Al Bahra <samy@kerneled.com>
special signal-delivery protections for setugid processes. In the
event that a system is relying on "unusual" signal delivery to
processes that change their credentials, this can be used to work
around application problems.
Also, add SIGALRM to the set of signals permitted to be delivered to
setugid processes by unprivileged subjects.
Reported by: Joe Greco <jgreco@ns.sol.net>
multiple mutex pools with different options and sizes. Mutex pools can
be created with either the default sleep mutexes or with spin mutexes.
A dynamically created mutex pool can now be destroyed if it is no longer
needed.
Create two pools by default, one that matches the existing pool that
uses the MTX_NOWITNESS option that should be used for building higher
level locks, and a new pool with witness checking enabled.
Modify the users of the existing mutex pool to use the appropriate pool
in the new implementation.
Reviewed by: jhb
as the target process' pid, it may exist if the process forked before leaving
the pgrp.
Thix fixes a panic that happens when calling setpgid to make a process
re-enter the pgrp with the same pgid as its pid if the pgrp still exists.
kernel access control.
Implement inter-process access control entry points for the MAC
framework. This permits policy modules to augment the decision
making process for process and socket visibility, process debugging,
re-scheduling, and signaling.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Invoke the necessary MAC entry points to maintain labels on
process credentials. In particular, invoke entry points for
the initialization and destruction of struct ucred, the copying
of struct ucred, and permit the initial labels to be set for
both process 0 (parent of all kernel processes) and process 1
(parent of all user processes).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
uifind() with a proc lock held.
change_ruid() and change_euid() have been modified to take a uidinfo
structure which will be pre-allocated by callers, they will then
call uihold() on the uidinfo structure so that the caller's logic
is simplified.
This allows one to call uifind() before locking the proc struct and
thereby avoid a potential blocking allocation with the proc lock
held.
This may need revisiting, perhaps keeping a spare uidinfo allocated
per process to handle this situation or re-examining if the proc
lock needs to be held over the entire operation of changing real
or effective user id.
Submitted by: Don Lewis <dl-freebsd@catspoiler.org>
pointer instead of a proc pointer and require the process pointed to
by the second argument to be locked. We now use the thread ucred reference
for the credential checks in p_can*() as a result. p_canfoo() should now
no longer need Giant.
allocate a blank cred first, lock the process, perform checks on the
old process credential, copy the old process credential into the new
blank credential, modify the new credential, update the process
credential pointer, unlock the process, and cleanup rather than trying
to allocate a new credential after performing the checks on the old
credential.
- Cleanup _setugid() a little bit.
- setlogin() doesn't need Giant thanks to pgrp/session locking and
td_ucred.
securelevel_*() to be NULL for a while now.
- Use KASSERT() instead of if (foo) panic(); to optimize the
!INVARIANTS case.
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it
from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).
Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections. This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.
This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways. This should
be temporary.
Reviewed by: core
Approved by: core
code that is still not safe. suser() reads p_ucred so it still needs
Giant for the time being. This should allow kern.giant.proc to be set
to 0 for the time being.
Move the network code from using cr_cansee() to check whether a
socket is visible to a requesting credential to using a new
function, cr_canseesocket(), which accepts a subject credential
and object socket. Implement cr_canseesocket() so that it does a
prison check, a uid check, and add a comment where shortly a MAC
hook will go. This will allow MAC policies to seperately
instrument the visibility of sockets from the visibility of
processes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
NULL, turn warning printf's into panic's, since this call has been
restructured such that a NULL cred would result in a page fault anyway.
There appears to be one case where NULL is explicitly passed in in the
sysctl code, and this is believed to be in error, so will be modified.
Securelevels now always require a credential context so that per-jail
securelevels are properly implemented.
Obtained from: TrustedBSD Project
Sponsored by: NAI Labs
Discussed with: bde
method-based inter-process security checks. To do this, introduce
a new cr_seeotheruids(u1, u2) function, which encapsulates the
"see_other_uids" logic. Call out to this policy following the
jail security check for all of {debug,sched,see,signal} inter-process
checks. This more consistently enforces the check, and makes the
check easy to modify. Eventually, it may be that this check should
become a MAC policy, loaded via a module.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
- Add a cred_free_thread() function (conditional on DIAGNOSTICS) that drops
a per-thread ucred reference to be used in debugging code when leaving
the kernel.
fully protect p_ucred yet so Giant is needed until all the p_ucred
locking is done. This is the original reason td_ucred was not used
immediately after its addition. Unfortunately, not using td_ucred is
not enough to avoid problems. Since p_ucred could be stale, we could
actually be dereferencing a stale pointer to dink with the refcount, so
we really need Giant to avoid foot-shooting. This allows td_ucred to
be safely used as well.
spares (the size of the field was changed from u_short to u_int to
reflect what it really ends up being). Accordingly, change users of
xucred to set and check this field as appropriate. In the kernel,
this is being done inside the new cru2x() routine which takes a
`struct ucred' and fills out a `struct xucred' according to the
former. This also has the pleasant sideaffect of removing some
duplicate code.
Reviewed by: rwatson
New locks are:
- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.
Please refer to sys/proc.h for the coverage of these locks.
Changes on the pgrp/session interface:
- pgfind() needs the pgrpsess_lock held.
- The caller of enterpgrp() is responsible to allocate a new pgrp and
session.
- Call enterthispgrp() in order to enter an existing pgrp.
- pgsignal() requires a pgrp lock held.
Reviewed by: jhb, alfred
Tested on: cvsup.jp.FreeBSD.org
(which is a quad-CPU machine running -current)
reaquiring it. In the same vein, don't bother dropping the thread cred
when goinf ot userland. We are guaranteed to nned it when we come back,
(which we are guaranteed to do).
Reviewed by: jhb@freebsd.org, bde@freebsd.org (slightly different version)
authorized based on a subject credential rather than a subject process.
This will permit the same logic to be reused in situations where only
the credential generating the signal is available, such as in the
delivery of SIGIO.
- Because of two clauses, the automatic success against curproc,
and the session semantics for SIGCONT, not all logic can be pushed
into cr_cansignal(), but those cases should not apply for most other
consumers of cr_cansignal().
- This brings the base system inter-process authorization code more
into line with the MAC implementation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
mutable contents of struct prison (hostname, securelevel, refcount,
pr_linux, ...)
o Generally introduce mtx_lock()/mtx_unlock() calls throughout kern/
so as to enforce these protections, in particular, in kern_mib.c
protection sysctl access to the hostname and securelevel, as well as
kern_prot.c access to the securelevel for access control purposes.
o Rewrite linux emulator abstractions for accessing per-jail linux
mib entries (osname, osrelease, osversion) so that they don't return
a pointer to the text in the struct linux_prison, rather, a copy
to an array passed into the calls. Likewise, update linprocfs to
use these primitives.
o Update in_pcb.c to always use prison_getip() rather than directly
accessing struct prison.
Reviewed by: jhb
- uid's -> uids
- whitespace improvements, linewrap improvements
- reorder copyright more appropriately
- remove redundant MP SAFE comments, add one "NOT MPSAFE?"
for setgroups(), which seems to be the sole un-changed system
call in the file.
- clean up securelevel_g?() functions, improve comments.
Largely submitted by: bde
that new models can inhabit kern.security.<modelname>.
o While I'm there, shorten somewhat excessive variable names, and clean
things up a little.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
- Restore inferior() to being iterative rather than recursive.
- Assert that the proctree_lock is held in inferior() and change the one
caller to get a shared lock of it. This also ensures that we hold the
lock after performing the check so the check can't be made invalid out
from under us after the check but before we act on it.
Requested by: bde
debug another process based on their respective {effective,additional,
saved,real} gid's. p1 is only permitted to debug p2 if its effective
gids (egid + additional groups) are a strict superset of the gids of
p2. This implements properly the security test previously incorrectly
implemented in kern_ktrace.c, and is consistent with the kernel
security policy (although might be slightly confusing for those more
familiar with the userland policy).
o Restructure p_candebug() logic so that various results are generated
comparing uids, gids, credential changes, and then composed in a
single check before testing for privilege. These tests encapsulate
the "BSD" inter-process debugging policy. Other non-BSD checks remain
seperate. Additional comments are added.
Submitted by: tmm, rwatson
Obtained from: TrustedBSD Project
Reviewed by: petef, tmm, rwatson
really be moved elsewhere: p_candebug() encapsulates the security
policy decision, whereas the P_INEXEC check has to do with "correctness"
regarding race conditions, rather than security policy.
Example: even if no security protections were enforced (the "uids are
advisory" model), removing P_INEXEC could result in incorrect operation
due to races on credential evaluation and modification during execve().
Obtained from: TrustedBSD Project
it has not yet returned. Use this flag to deny debugging requests while
the process is execve()ing, and close once and for all any race conditions
that might occur between execve() and various debugging interfaces.
Reviewed by: jhb, rwatson
of Giant during the Giant unwinding phase, and start work on instrumenting
Giant for the file and proc mutexes.
These wrappers allow developers to turn on and off Giant around various
subsystems. DEVELOPERS SHOULD NEVER TURN OFF GIANT AROUND A SUBSYSTEM JUST
BECAUSE THE SYSCTL EXISTS! General developers should only considering
turning on Giant for a subsystem whos default is off (to help track down
bugs). Only developers working on particular subsystems who know what
they are doing should consider turning off Giant.
These wrappers will greatly improve our ability to unwind Giant and test
the kernel on a (mostly) subsystem by subsystem basis. They allow Giant
unwinding developers (GUDs) to emplace appropriate subsystem and structural
mutexes in the main tree and then request that the larger community test
the work by turning off Giant around the subsystem(s), without the larger
community having to mess around with patches. These wrappers also allow
GUDs to boot into a (more likely to be) working system in the midst of
their unwinding work and to test that work under more controlled
circumstances.
There is a master sysctl, kern.giant.all, which defaults to 0 (off). If
turned on it overrides *ALL* other kern.giant sysctls and forces Giant to
be turned on for all wrapped subsystems. If turned off then Giant around
individual subsystems are controlled by various other kern.giant.XXX sysctls.
Code which overlaps multiple subsystems must have all related subsystem Giant
sysctls turned off in order to run without Giant.
- crhold() returns a reference to the ucred whose refcount it bumps.
- crcopy() now simply copies the credentials from one credential to
another and has no return value.
- a new crshared() primitive is added which returns true if a ucred's
refcount is > 1 and false (0) otherwise.
a single kern.security.seeotheruids_permitted, describes as:
"Unprivileged processes may see subjects/objects with different real uid"
NOTE: kern.ps_showallprocs exists in -STABLE, and therefore there is
an API change. kern.ipc.showallsockets does not.
- Check kern.security.seeotheruids_permitted in cr_cansee().
- Replace visibility calls to socheckuid() with cr_cansee() (retain
the change to socheckuid() in ipfw, where it is used for rule-matching).
- Remove prison_unpcb() and make use of cr_cansee() against the UNIX
domain socket credential instead of comparing root vnodes for the
UDS and the process. This allows multiple jails to share the same
chroot() and not see each others UNIX domain sockets.
- Remove unused socheckproc().
Now that cr_cansee() is used universally for socket visibility, a variety
of policies are more consistently enforced, including uid-based
restrictions and jail-based restrictions. This also better-supports
the introduction of additional MAC models.
Reviewed by: ps, billf
Obtained from: TrustedBSD Project
processes to attach debugging to themselves even though the
global kern_unprivileged_procdebug_permitted policy might disallow
this.
o Move the kern_unprivileged_procdebug_permitted check above the
(p1==p2) check.
Reviewed by: des
securelevel_gt(), determine first if a local securelevel exists --
if so, perform the check based on imax(local, global). Otherwise,
simply use the global value.
o Note: even though local securelevels might lag below the global one,
if the global value is updated to higher than local values, maximum
will still be used, making the global dominant even if there is local
lag.
Obtained from: TrustedBSD Project
for securelevel_ge() and securelevel_gt(), I was a little surprised,
but fixed it. Turns out that it was the code that was inverted, during
a whitespace cleanup in my commit tree. This commit inverts the
checks, and restores the comment.
abstract the securelevel implementation details from the checking
code. The call in -CURRENT accepts a struct ucred--in -STABLE, it
will accept struct proc. This facilitates the upcoming commit of
per-jail securelevel support. The calls will also generate a
kernel printf if the calls are made with NULL ucred/proc pointers:
generally speaking, there are few instances of this, and they should
be fixed.
o Update p_candebug() to use securelevel_gt(); future updates to the
remainder of the kernel tree will be committed soon.
Obtained from: TrustedBSD Project
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
by renaming it to kern.security.suser_enabled. This makes the name
consistent with other use: "permitted" now refers to a specific right
or privilege, whereas "enabled" refers to a feature. As this hasn't
been MFC'd, and using this destroys a running system currently, I believe
the user base of the sysctl will not be too unhappy.
o While I'm at it, un-staticize and export the supporting variable, as it
will be used by kern_cap.c shortly.
Obtained from: TrustedBSD Project
of debugging the current process when that is in conflict with other
restrictions (such as jail, unprivileged_procdebug_permitted, etc).
o This corrects anomolies in the behavior of
kern.security.unprivileged_procdebug_permitted when using truss and
ktrace. The theory goes that this is now safe to use.
Obtained from: TrustedBSD Project
MIB entries.
o Relocate kern.suser_permitted to kern.security.suser_permitted.
o Introduce new kern.security.unprivileged_procdebug_permitted, which
(when set to 0) prevents processes without privilege from performing
a variety of inter-process debugging activities. The default is 1,
to provide current behavior.
This feature allows "hardened" systems to disable access to debugging
facilities, which have been associated with a number of past security
vulnerabilities. Previously, while procfs could be unmounted, other
in-kernel facilities (such as ptrace()) were still available. This
setting should not be modified on normal development systems, as it
will result in frustration. Some utilities respond poorly to
failing to get the debugging access they require, and error response
by these utilities may be improved in the future in the name of
beautification.
Note that there are currently some odd interactions with some
facilities, which will need to be resolved before this should be used
in production, including odd interactions with truss and ktrace.
Note also that currently, tracing is permitted on the current process
regardless of this flag, for compatibility with previous
authorization code in various facilities, but that will probably
change (and resolve the odd interactions).
Obtained from: TrustedBSD Project
The p_can(...) construct was a premature (and, it turns out,
awkward) abstraction. The individual calls to p_canxxx() better
reflect differences between the inter-process authorization checks,
such as differing checks based on the type of signal. This has
a side effect of improving code readability.
o Replace direct credential authorization checks in ktrace() with
invocation of p_candebug(), while maintaining the special case
check of KTR_ROOT. This allows ktrace() to "play more nicely"
with new mandatory access control schemes, as well as making its
authorization checks consistent with other "debugging class"
checks.
o Eliminate "privused" construct for p_can*() calls which allowed the
caller to determine if privilege was required for successful
evaluation of the access control check. This primitive is currently
unused, and as such, serves only to complicate the API.
Approved by: ({procfs,linprocfs} changes) des
Obtained from: TrustedBSD Project
real uid, saved uid, real gid, and saved gid to ucred, as well as the
pcred->pc_uidinfo, which was associated with the real uid, only rename
it to cr_ruidinfo so as not to conflict with cr_uidinfo, which
corresponds to the effective uid.
o Remove p_cred from struct proc; add p_ucred to struct proc, replacing
original macro that pointed.
p->p_ucred to p->p_cred->pc_ucred.
o Universally update code so that it makes use of ucred instead of pcred,
p->p_ucred instead of p->p_pcred, cr_ruidinfo instead of p_uidinfo,
cr_{r,sv}{u,g}id instead of p_*, etc.
o Remove pcred0 and its initialization from init_main.c; initialize
cr_ruidinfo there.
o Restruction many credential modification chunks to always crdup while
we figure out locking and optimizations; generally speaking, this
means moving to a structure like this:
newcred = crdup(oldcred);
...
p->p_ucred = newcred;
crfree(oldcred);
It's not race-free, but better than nothing. There are also races
in sys_process.c, all inter-process authorization, fork, exec, and
exit.
o Remove sigio->sio_ruid since sigio->sio_ucred now contains the ruid;
remove comments indicating that the old arrangement was a problem.
o Restructure exec1() a little to use newcred/oldcred arrangement, and
use improved uid management primitives.
o Clean up exit1() so as to do less work in credential cleanup due to
pcred removal.
o Clean up fork1() so as to do less work in credential cleanup and
allocation.
o Clean up ktrcanset() to take into account changes, and move to using
suser_xxx() instead of performing a direct uid==0 comparision.
o Improve commenting in various kern_prot.c credential modification
calls to better document current behavior. In a couple of places,
current behavior is a little questionable and we need to check
POSIX.1 to make sure it's "right". More commenting work still
remains to be done.
o Update credential management calls, such as crfree(), to take into
account new ruidinfo reference.
o Modify or add the following uid and gid helper routines:
change_euid()
change_egid()
change_ruid()
change_rgid()
change_svuid()
change_svgid()
In each case, the call now acts on a credential not a process, and as
such no longer requires more complicated process locking/etc. They
now assume the caller will do any necessary allocation of an
exclusive credential reference. Each is commented to document its
reference requirements.
o CANSIGIO() is simplified to require only credentials, not processes
and pcreds.
o Remove lots of (p_pcred==NULL) checks.
o Add an XXX to authorization code in nfs_lock.c, since it's
questionable, and needs to be considered carefully.
o Simplify posix4 authorization code to require only credentials, not
processes and pcreds. Note that this authorization, as well as
CANSIGIO(), needs to be updated to use the p_cansignal() and
p_cansched() centralized authorization routines, as they currently
do not take into account some desirable restrictions that are handled
by the centralized routines, as well as being inconsistent with other
similar authorization instances.
o Update libkvm to take these changes into account.
Obtained from: TrustedBSD Project
Reviewed by: green, bde, jhb, freebsd-arch, freebsd-audit
follows: the effective uid of p1 (subject) must equal the real, saved,
and effective uids of p2 (object), p2 must not have undergone a
credential downgrade. A subject with appropriate privilege may override
these protections.
In the future, we will extend these checks to require that p1 effective
group membership must be a superset of p2 effective group membership.
Obtained from: TrustedBSD Project
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
modify the scheduling properties of processes with a different real
uid but the same effective uid (i.e., daemons, et al). (note: these
cases were previously commented out, so this does not change the
compiled code at al)
Obtained from: TrustedBSD Project
semantics don't: in practice, both policy and semantics permit
loop-back debugging operations, only it's just a subset of debugging
operations (i.e., a proc can open its own /dev/mem), and that's at a
higher layer.
and non-P_SUGID cases, simplify p_cansignal() logic so that the
P_SUGID masking of possible signals is independent from uid checks,
removing redundant code and generally improving readability.
Reviewed by: tmm
Obtained from: TrustedBSD Project
the ability of unprivileged processes to deliver arbitrary signals
to daemons temporarily taking on unprivileged effective credentials
when P_SUGID is not set on the target process:
Removed:
(p1->p_cred->cr_ruid != ps->p_cred->cr_uid)
(p1->p_ucred->cr_uid != ps->p_cred->cr_uid)
o Replace two "allow this" exceptions in p_cansignal() restricting
the ability of unprivileged processes to deliver arbitrary signals
to daemons temporarily taking on unprivileged effective credentials
when P_SUGID is set on the target process:
Replaced:
(p1->p_cred->p_ruid != p2->p_ucred->cr_uid)
(p1->p_cred->cr_uid != p2->p_ucred->cr_uid)
With:
(p1->p_cred->p_ruid != p2->p_ucred->p_svuid)
(p1->p_ucred->cr_uid != p2->p_ucred->p_svuid)
o These changes have the effect of making the uid-based handling of
both P_SUGID and non-P_SUGID signal delivery consistent, following
these four general cases:
p1's ruid equals p2's ruid
p1's euid equals p2's ruid
p1's ruid equals p2's svuid
p1's euid equals p2's svuid
The P_SUGID and non-P_SUGID cases can now be largely collapsed,
and I'll commit this in a few days if no immediate problems are
encountered with this set of changes.
o These changes remove a number of warning cases identified by the
proc_to_proc inter-process authorization regression test.
o As these are new restrictions, we'll have to watch out carefully for
possible side effects on running code: they seem reasonable to me,
but it's possible this change might have to be backed out if problems
are experienced.
Submitted by: src/tools/regression/security/proc_to_proc/testuid
Reviewed by: tmm
Obtained from: TrustedBSD Project
ability of unprivileged processes to modify the scheduling properties
of daemons temporarily taking on unprivileged effective credentials.
These cases (p1->p_cred->p_ruid == p2->p_ucred->cr_uid) and
(p1->p_ucred->cr_uid == p2->p_ucred->cr_uid), respectively permitting
a subject process to influence the scheduling of a daemon if the subject
process has the same real uid or effective uid as the daemon's effective
uid. This removes a number of the warning cases identified by the
proc_to_proc iner-process authorization regression test.
o As these are new restrictions, we'll have to watch out carefully for
possible side effects on running code: they seem reasonable to me,
but it's possible this change might have to be backed out if problems
are experienced.
Reported by: src/tools/regression/security/proc_to_proc/testuid
Obtained from: TrustedBSD Project
p_can(...P_CAN_SEE...) to getpgid(), getsid(), and setpgid(),
blocking these operations on processes that should not be visible
by the requesting process. Required to reduce information leakage
in MAC environments.
Obtained from: TrustedBSD Project
from signal authorization checking.
o p_cansignal() takes three arguments: subject process, object process,
and signal number, unlike p_cankill(), which only took into account
the processes and not the signal number, improving the abstraction
such that CANSIGNAL() from kern_sig.c can now also be eliminated;
previously CANSIGNAL() special-cased the handling of SIGCONT based
on process session. privused is now deprecated.
o The new p_cansignal() further limits the set of signals that may
be delivered to processes with P_SUGID set, and restructures the
access control check to allow it to be extended more easily.
o These changes take into account work done by the OpenBSD Project,
as well as by Robert Watson and Thomas Moestl on the TrustedBSD
Project.
Obtained from: TrustedBSD Project
toggle the P_SUGID bit explicitly, rather than relying on it being
set implicitly by other protection and credential logic. This feature
is introduced to support inter-process authorization regression testing
by simplifying userland credential management allowing the easy
isolation and reproduction of authorization events with specific
security contexts. This feature is enabled only by "options REGRESSION"
and is not intended to be used by applications. While the feature is
not known to introduce security vulnerabilities, it does allow
processes to enter previously inaccessible parts of the credential
state machine, and is therefore disabled by default. It may not
constitute a risk, and therefore in the future pending further analysis
(and appropriate need) may become a published interface.
Obtained from: TrustedBSD Project
ps_showallprocs such that if superuser is present to override process
hiding, the search falls through [to success]. When additional
restrictions are placed on process visibility, such as MAC, new clauses
will be placed above the return(0).
Obtained from: TrustedBSD Project
two subject ucreds. Unlike p_cansee(), u_cansee() doesn't have
process lock requirements, only valid ucred reference requirements,
so is prefered as process locking improves. For now, back p_cansee()
into u_cansee(), but eventually p_cansee() will go away.
Reviewed by: jhb, tmm
Obtained from: TrustedBSD Project
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
1) mpsafe (protect the refcount with a mutex).
2) reduce duplicated code by removing the inlined crdup() from crcopy()
and make crcopy() call crdup().
3) use M_ZERO flag when allocating initial structs instead of calling bzero
after allocation.
4) expand the size of the refcount from a u_short to an u_int, by using
shorts we might have an overflow.
Glanced at by: jake
could debug processes after the commit that introduced the typo.
Security is good, but security is not always the same as turning things
off :-).
PR: kern/22711
Obtained from: brooks@one-eyed-alien.net
in the p_candebug() function. Synchronize with sef's CHECKIO()
macro from the old procfs, which seems to be a good source of security
checks.
Obtained from: TrustedBSD Project
chgsbsize(), which are called rather frequently and may be called from an
interrupt context in the case of chgsbsize(). Instead, do the hash table
lookup and maintenance when credentials are changed, which is a lot less
frequent. Add pointers to the uidinfo structures to the ucred and pcred
structures for fast access. Pass a pointer to the credential to chgproccnt()
and chgsbsize() instead of passing the uid. Add a reference count to the
uidinfo structure and use it to decide when to free the structure rather
than freeing the structure when the resource consumption drops to zero.
Move the resource tracking code from kern_proc.c to kern_resource.c. Move
some duplicate code sequences in kern_prot.c to separate helper functions.
Change KASSERTs in this code to unconditional tests and calls to panic().
kern.ps_showallprocs. Apparently got lost in the merge process from
the capability patches. Now fixed.
Submitted by: jdp
Obtained from: TrustedBSD Project
int p_can(p1, p2, operation, privused)
which allows specification of subject process, object process,
inter-process operation, and an optional call-by-reference privused
flag, allowing the caller to determine if privilege was required
for the call to succeed. This allows jail, kern.ps_showallprocs and
regular credential-based interaction checks to occur in one block of
code. Possible operations are P_CAN_SEE, P_CAN_SCHED, P_CAN_KILL,
and P_CAN_DEBUG. p_can currently breaks out as a wrapper to a
series of static function checks in kern_prot, which should not
be invoked directly.
o Commented out capabilities entries are included for some checks.
o Update most inter-process authorization to make use of p_can() instead
of manual checks, PRISON_CHECK(), P_TRESPASS(), and
kern.ps_showallprocs.
o Modify suser{,_xxx} to use const arguments, as it no longer modifies
process flags due to the disabling of ASU.
o Modify some checks/errors in procfs so that ENOENT is returned instead
of ESRCH, further improving concealment of processes that should not
be visible to other processes. Also introduce new access checks to
improve hiding of processes for procfs_lookup(), procfs_getattr(),
procfs_readdir(). Correct a bug reported by bp concerning not
handling the CREATE case in procfs_lookup(). Remove volatile flag in
procfs that caused apparently spurious qualifier warnigns (approved by
bde).
o Add comment noting that ktrace() has not been updated, as its access
control checks are different from ptrace(), whereas they should
probably be the same. Further discussion should happen on this topic.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
time being, the ASU accounting flag will no longer be available, but
may be reinstituted in the future once authorization have been redone.
As it is, the kernel went through contortions in access control to
avoid calling suser, which always set the flag. This will also allow
suser to accept const struct *{cred, proc} arguments.
Reviewed by: bde, green, phk, freebsd-security, others
Approved by: bde
Obtained from: TrustedBSD Project
1) while allocating a uidinfo struct malloc is called with M_WAITOK,
it's possible that while asleep another process by the same user
could have woken up earlier and inserted an entry into the uid
hash table. Having redundant entries causes inconsistancies that
we can't handle.
fix: do a non-waiting malloc, and if that fails then do a blocking
malloc, after waking up check that no one else has inserted an entry
for us already.
2) Because many checks for sbsize were done as "test then set" in a non
atomic manner it was possible to exceed the limits put up via races.
fix: instead of querying the count then setting, we just attempt to
set the count and leave it up to the function to return success or
failure.
3) The uidinfo code was inlining and repeating, lookups and insertions
and deletions needed to be in their own functions for clarity.
Reviewed by: green
kern_prot, which cleans up some namespace issues
o Don't need a special handler to limit un-setting, as suser is used to
protect suser_permitted, making it one-way by definition.
Suggested by: bde
returning anything but EPERM.
o suser is enabled by default; once disabled, cannot be reenabled
o To be used in alternative security models where uid0 does not connote
additional privileges
o Should be noted that uid0 still has some additional powers as it
owns many important files and executables, so suffers from the same
fundamental security flaws as securelevels. This is fixed with
MAC integrity protection code (in progress)
o Not safe for consumption unless you are *really* sure you don't want
things like shutdown to work, et al :-)
Obtained from: TrustedBSD Project
syscall path inward. A system call may select whether it needs the MP
lock or not (the default being that it does need it).
A great deal of conditional SMP code for various deadended experiments
has been removed. 'cil' and 'cml' have been removed entirely, and the
locking around the cpl has been removed. The conditional
separately-locked fast-interrupt code has been removed, meaning that
interrupts must hold the CPL now (but they pretty much had to anyway).
Another reason for doing this is that the original separate-lock for
interrupts just doesn't apply to the interrupt thread mechanism being
contemplated.
Modifications to the cpl may now ONLY occur while holding the MP
lock. For example, if an otherwise MP safe syscall needs to mess with
the cpl, it must hold the MP lock for the duration and must (as usual)
save/restore the cpl in a nested fashion.
This is precursor work for the real meat coming later: avoiding having
to hold the MP lock for common syscalls and I/O's and interrupt threads.
It is expected that the spl mechanisms and new interrupt threading
mechanisms will be able to run in tandem, allowing a slow piecemeal
transition to occur.
This patch should result in a moderate performance improvement due to
the considerable amount of code that has been removed from the critical
path, especially the simplification of the spl*() calls. The real
performance gains will come later.
Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
my tree for ages (~2 years) waiting for an excuse to commit it. Now Linux
has implemented it and it seems that Staroffice (when using the
linux_base6.1 port's libc) calls this in the linux emulator and dies in
setup. The Linux emulator can call these now.
to wake up any processes waiting via PIOCWAIT on process exit, and truss
needs to be more aware that a process may actually disappear while it's
waiting.
Reviewed by: Paul Saab <ps@yahoo-inc.com>
login (or not if root)
then exit the shell
truss will get stuct in tsleep
I dont know if this is correct, but it fixes the problem and
according to the commends in pioctl.h, PF_ISUGID is set when we
want to ignore UID changes.
The code is checking for when PF_ISUGID is not set and since it
never is set, we always ignore UID changes.
Submitted by: Paul Saab <ps@yahoo-inc.com>
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.
Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.
Replace procfs.h:CHECKIO() macros with calls to p_trespass().
Only show command lines to process which can trespass on the target
process.
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
dereference a NULL pointer, causing a panic. Instead of following
s_leader to find the session id, store it in the session structure.
Jukka found the following info:
BTW - I just found what I have been looking for. Std 1003.1
Part 1: SYSTEM API [C LANGUAGE] section 2.2.2.80 states quite
explicitly...
Session lifetime: The period between when a session is created
and the end of lifetime of all the process groups that remain
as members of the session.
So, this quite clearly tells that while there is any single
process in any process group which is a member of the session,
the session remains as an independent entity.
Reviewed by: peter
Submitted by: "Jukka A. Ukkonen" <jau@jau.tmt.tele.fi>
flag is set in the p_pfsflags field. This, essentially, prevents an SUID
proram from hanging after being traced. (E.g., "truss /usr/bin/rlogin" would
fail, but leave rlogin in a stopevent state.) Yet another case where procctl
is (hopefully ;)) no longer needed in the general case.
Reviewed by: bde (thanks bruce :))
it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
same syscall number as NetBSD/OpenBSD. The getpgid() came from NetBSD
(I think) originally, but it's basically cut/paste/edit from the other
simple get*() syscalls.
