Commit Graph

21 Commits

Author SHA1 Message Date
Søren Schmidt
8975eded26 Update with latest ATA/ATAPI ver 6 rev 2 items. 2001-10-06 11:07:04 +00:00
Søren Schmidt
c36c574aaa Update the promise raid structure with some of the info I've gathered
before I'm accused of "lending" it from somebody else.
2001-10-04 18:02:26 +00:00
Søren Schmidt
f601b4eb7c Overhaul to minimize stack usage, in some places >2K was used
on the stack *blush*...
2001-09-20 15:25:36 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Søren Schmidt
65d5e55cdd Add support for the newer Promise chips here as well. 2001-08-21 12:23:31 +00:00
Poul-Henning Kamp
079f2df393 Make the disk mini-layer check for and handle zero-length transfers
instead of the underlying drivers.
2001-05-06 21:55:22 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Søren Schmidt
68337c2c00 Handle the case where the last piece of a RAID0 (striped) disk is
not of interleave size.
2001-03-21 11:48:14 +00:00
Søren Schmidt
6eee1a1c12 Add sysctls for reading the tunables as suggested by des.
Minor cleanups plus checks of the ->active state.
Cosmetics.
2001-03-19 08:04:54 +00:00
Søren Schmidt
a2dca80a1d Provide the interface to atacontrol and associated logic.
see atacontrol(8) for more.

Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS
options are gone, use the tuneables listed in ata.4 instead from
the loader (this makes it possible to switch off DMA before the
driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
Søren Schmidt
b17f7a1aa5 Introduce busspace instead of the good old in/out instructions.
Not pretty but it works (I hope)...
2001-02-06 16:44:25 +00:00
Søren Schmidt
95eaffae1b Add session argument to *close_disk, allowing to set session type on fixate.
Add support for different blank/erase types.

Update headers.
2001-01-10 19:19:47 +00:00
Søren Schmidt
6ddc41c034 Proberly calculate the RAID structure on the Promise Fasttrak. 2001-01-04 09:11:00 +00:00
Søren Schmidt
6cf4911dd6 Use M_ZERO flag on malloc when approbiate. 2000-12-26 12:05:49 +00:00
Poul-Henning Kamp
959b7375ed Staticize some malloc M_ instances. 2000-12-08 20:09:00 +00:00
Søren Schmidt
0cdc179319 Only offset raid disks > 1 on the HPT, this should solve the
boot problems..
However this demands that dangerously dedicated disks use an
offset of at least 10 from the start to not overwrite the
raid config sector on the HPT...
2000-11-12 20:45:14 +00:00
Søren Schmidt
6cc33af8f1 Update the config gathering code for both Promise & HPT 2000-11-01 17:35:44 +00:00
Søren Schmidt
92be7ac569 Update the Promise RAID code, there are differences between BIOS
version unfortunately...
2000-10-30 17:11:40 +00:00
Søren Schmidt
0f4eed7d8b Clean up the raid code a bit, also allow disks on HPT controllers to
be swapped around and still be put in the correct order in a raid.
2000-10-22 12:17:57 +00:00
Søren Schmidt
550abec2a0 Minor changes to the ATA RAID support code, remove some verbosity
and put some under bootverbose..
2000-10-18 18:49:42 +00:00
Søren Schmidt
e9cf6115e4 Add support for ATA "pseudo" RAID controllers as the Promise Fasttrak
and HighPoint HPT370 controllers.

Use by defining the RAID in the BIOS and the "ar driver will pick it up
automagically...
2000-10-13 13:04:45 +00:00