duplicate allocated on the heap; the address defn points to is significant,
and is checked against the address of "null" in certain conditionals.
PR: 59883
MFC after: 1 week
example) view io stats while sorting by process size. Also adds
voluntary and involuntary context-switch stats to the io page because
there was lots of room.
Submitted by: Dan Nelson dnelson at allantgroup.com
meaningless. In particular, don't assume that it is left untouched if
stat(2) fails; that assumption happens to fail at high optimization
levels on some platforms.
MFC after: 1 week
the .MAKEFLAGS variable so that these are also passed to sub-makes.
This makes the handling of variables in the command environment more
consistent.
PR: bin/68853
Submitted by: Martin Kamerhofer <data@sbox.tugraz.at>
as environment variables and should not be set on make's command
line. They happen to work accidentially as command line variables
too when none of the sub-makes wants to play games with them (because
make is putting command line variables into the environment and will
find them there later on). Makefile.inc1 wants to change
MAKEOBJDIRPREFIX. In this case one cannot set it on the command line.
synonym for --format. Update the man page to reflect this. While
I'm here, change the man page to document "tar" rather than "bsdtar,"
update some comments about -l compatibility and fix a few grammar nits.
throw out the whole thing and stop tracking links entirely. That will
break all remaining hardlinks, but should free up enough memory to
let everything finish.
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
re-import `patch' into this location. Instead I think I will import
it to 'patch-b', and that way I can be sure that I am starting with
a clean slate WRT the CVS repository.
the MFLAGS target. Document that variable assignments from the MAKEFLAGS
environment variable and the .MAKEFLAGS and .MFLAGS target have the
same precedence as command line variable assignments.
variable as required by POSIX. This causes such variables to be
pushed into all sub-makes called by the make (except when the MAKEFLAGS
variable is explicitely changed in the sub-make's environment).
This makes them also mostly un-overrideable in sub-makes except on the
sub-make's command line. Therefor specifying 'make CC=icc' will cause
icc to be used as C compiler in all sub-makes no matter what the Makefiles
itself try to do to the CC variable.
This patch also corrects the handling of the MFLAGS variable. MFLAGS
contains all the command line flags but not the command line variable
assignments. The evaluation of the .MFLAGS or .MAKEFLAGS target now
changes both MFLAGS and MAKEFLAGS (they used to change MAKEFLAGS only).
Makefiles can use MFLAGS for their own purposes given that they do not
except MFLAGS to be undefined at the beginning and that they don't evaluate
.MFLAGS or .MAKEFLAGS. MFLAGS should be removed for POSIX compliance,
but it is unfortunately heavily used by the X makefiles.
This has been extensively tested by port builds (thanks to portmgr), new
worlds and kernels.
PR: standards/57295 (1st part above)
Submitted by: James E. Flemer <jflemer@alum.rpi.edu>
Approved by: portmgr
Obtained from: NetBSD (1st part above)
MFC after: 4 weeks
For -l, upset everyone by breaking it. Specifically, -l now produces
a lengthy error message that suggests --check-links (POSIX -l) or
--one-file-system (GNU -l) instead. However, if POSIXLY_CORRECT is set,
use the POSIX interpretation.
For -o, please everyone by making it work both ways:
* -xo uses POSIX behavior
* -co uses "almost GNU" behavior (as close as we can get until
libarchive implements a true V7 tar format)
replace the version we currently have in src/gnu/usr.bin/patch/.
Among other things, this version includes a --posix option for strict
POSIX conformance.
This version is the current source from OpenBSD as of today. It is
their 3.5-release, plus a few updates to patch.c and pch.c that they
made about three weeks ago.
to be executed even when -n is given on the command line to make. This is
very handy for calls to submakes.
This is slightly changed from the original patch as obtained from NetBSD.
The NetBSD variant prints lines which have both '+' and '@' when -n
is specified. The commited version always obeys '@'.
Bump MAKE_VERSION so Makefiles can use this conditionally.
PR: standards/66357 (partly)
Submitted by: Mark Baushke <mdb@juniper.net>
Obtained from: NetBSD
options even though they look like primaries. (This is already documented
in the options themselves, but is sufficiently astonishing that I think it
deserves a BUGS entry as well.)
section.
Move the HISTORY section to place it before BUGS rather than after BUGS,
in order to minimize the chance of this error being reproduced in the
future. (Both mdoc(7) and 63% of manual pages have these sections listed
in this order.)
- 'savech' is only used if it is set a few lines above where
it is used, initialize it to silence warning.
- 'length' is either -1 or greater than 0, hence it is safe to cast it
to unsigned when comparing it here.
odsyntax.c:
- 'p' is assigned either (*argvp)[0] or (*argvp)[1] which both are
char *. 'num' and 'end' are assigned values based on 'p'.
Hence use char * instead of unsigned char * for these variables.
'&end' as the second argument to strtoll does not need to be casted
to char** any more.
This solves a
'dereferencing type-punned pointer will break strict-aliasing rules'
warning when compiling with -O2.
parse.c:
- 'prec' is only used when sokay == USEPREC and sokay = USEPREC
when 'prec' is assigned. Hence 'prec' is not used uninitialized,
initialize it to silence warning.
- The code involving 'nextpr' is hard to follow, but I belive
'nextpr' will not be used unless it is initialized.
Anyway, IF 'nextpr' is used uninitialized it is better to
get a consistant error (seg fault, when dereferencing a NULL pointer)
than potentially accessing some random memory.
The above changes makes hexdump WARNS=6 clean even when compiled with
-O2. Hence bump WARNS to keep it clean.
Tested by: CFLAGS='-O2 -pipe' make universe
to the PR failed, because the line skipping function is actually called
from two places in the code to do quite different things (this should
be two functions probably): in a false .if to skip to the next line
beginning with a dot and to collect .for loops. In the seconds case we
should not skip comments, because they are actually harder to handle than
we need for the .if case and should defer this to the main code.
PR: bin/25627
Submitted by: Seth Kingsley (original patch)
slightly different from the patch in the PR. The problem is, that
make handles .if clauses inside false .if clauses simply by
counting them - it doesn't put them onto the conditional stack, nor even
parses them so we need an extra line number stack for these ifs.
PR: bin/61257
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
Replace the use of '=' in conditionals in the examples
by the more correct '=='.
Clarify the example explaining that .for expansion takes place before
.if handling by showing the correct code instead of saying 'the other
way around'. Change a variable name there so the example is more parseable
to the human reader.
PR: docs/65400
Submitted by: Roman Neuhauser <neuhauser@chello.cz>
from the :S modifier which follows a bit further below. This way the
reader can read each of these two descriptions without having to jump
back and forth in the manpage.
PR: docs/26943
Submitted by: Alex Kapranoff <alex@kapran.bitmcnit.bryansk.su>
result buffer, so we need to format it ourselves. The problem is
that the length is stored as the return value from readlink, so we
need to pass the return value from our syscall into print_arg.
Motivated by: truss garbage on my screen from reading /etc/malloc.conf.
of course, but I make an effort to accomodate GNU tar scripts that
use -o with -c (with a meaning that totally contradicts SUSv2) by
only issuing a benign warning message in that case.
computing the io statistics over and over not as expensive.
This is a bit of a cop out, as I should just allocate a struct with
the computed values, but this will do for now.
conversion interprets input bytes as multibyte sequences and displays
printable characters in the area corresponding to their first byte.
The remaining bytes are shown as "**".
data structures that scale better with large character sets, instead of
arrays indexed by character value:
- Sets of characters to delete/squeeze are stored in a new "cset" structure,
which is implemented as a splay tree of extents. This structure has the
ability to store character classes (ala wctype(3)), but this is not
currently fully utilized.
- Mappings between characters are stored in a new "cmap" structure, which
is also a splay tree.
- The parser no longer builds arrays containing all the characters in a
particular class; instead, next() determines them on-the-fly using
nextwctype(3).
