Some Intel XHCI controlles timeout processing so-called "TRBs" when
the final LINK TRB of a so-called "TD" has the CHAIN-BIT set.
MFC after: 1 week
Tested by: glebius @
The stdtime sources were moved from lib/libc to contrib/tzcode, and tzfile.h
is not an installed header, so the man page refers to its location in the
source tree.
The documentation could be more clear about the internal nature of the
header, but those changes should go through upstream tzcode.
PR: docs/176864
Approved by: hrs (mentor)
the TTY. In such a case, ttydev_close() is called multiple times and
each time, t_revokecnt is incremented and cv_broadcast() is called for
both the t_outwait and t_inwait condition variables.
Let's say revoke(2) comes in first and gets to call tty_drain() from
ttydev_leave(). Let's say that the revoke comes from init(8) as the
result of running "shutdown -r now". Since shutdown prints various
messages to the console before announing that the machine will reboot
immediately, let's also say that the output queue is not empty and
that tty_drain() has something to do. Let's assume this all happens
on a 9600 baud serial console, so it takes a time to drain.
The shutdown command will exit(2) and as such will end up closing
stdout. Let's say this close will come in second, bump t_revokecnt
and call tty_wakeup(). This has tty_wait() return prematurely and
the next thing that will happen is that the thread doing revoke(2)
will flush the TTY. Since the drain wasn't complete, the flush will
effectively drop whatever is left in t_outq.
This change takes into account that tty_drain() will return ERESTART
due to the fact that t_revokecnt was bumped and in that case simply
call tty_drain() again. The thread in question is already performing
the close so it can safely finish draining the TTY before destroying
the TTY structure.
Now all messages from shutdown will be printed on the serial console.
Obtained from: Juniper Networks, Inc.
is given to convert uids and gids to user names and group names even when
running in capability mode sandbox.
While here log on stderr when we successfully enter the sandbox.
Sponsored by: The FreeBSD Foundation
Get rid of the msg_peek() function, which has a problem. If there was less
data in the socket buffer than requested by the caller, the function would busy
loop, as select(2) will always return immediately.
We can just receive nvlhdr now, because some time ago we splitted receive of
data from the receive of descriptors.
MFC after: 1 week
installation is cdrom. This enables bsdconfig(8) to make use
of the on-disc pkg(8) repository configuration, which fixes
package selection and installation from the dvd installer.
MFC after: 3 days
M-MFC-With: r259426
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
installation.
As part of the 'pkg-stage' target, copy the configuration file
to the 'packages/repos/' directory on the DVD filesystem.
MFC after: 3 days
X-MFC-Before: -RC3
Sponsored by: The FreeBSD Foundation
containing the trap instruction encoding (0x7c810808), and restoring it back
with the frame on return. This caused it to panic on my ppc32 machine, but
somehow my ppc64 machine overlooked it, because I was using such a simple
dtrace probe.
X-MFC-with: r259245
MFC after: 2 weeks
We need to do this because the Linux compat layer uses sx(9) for
mutex, however the lagg code uses rmlocks and calls into the mellanox
driver. This causes deadlock due to sleeping while holding a rmlock.
Submitted by: Shahar Klein (shahark mellanox.com)
MFC After: 3 days.
support all valid SAM-5 LUN IDs. CAM_VERSION is bumped, as the CAM ABI
(though not API) is changed. No behavior is changed relative to r257345
except that LUNs with non-zero high 32 bits will no longer be ignored
during device enumeration for SIMs that have set PIM_EXTLUNS.
Reviewed by: scottl
o Assign sc->an_dev in an_probe() (which isn't really a probe function in
the standard newbus sense) as we may need it for printing errors.
o Use device_printf() rather than if_printf() in an_reset() - this is
called from an_probe() long before the ifp structure is initialised
in an_attach().
o Initialize the ifp structure early in an_attach() as we use if_printf()
in cases where allocation of descriptors etc fails.
MFC after: 3 days
them up as part of firmware initialization (which the driver gets to do
only if it's the master driver).
Read the range of tids available for the ETHOFLD functionality if it's
enabled.
New is_ftid() and is_etid() functions to test whether a tid falls within
the range of filter tids or ETHOFLD tids respectively.
MFC after: 2 weeks
Promoting the SIGINFO handler's log message from LOG_INFO to
LOG_NOTICE, and promoting the "Processing event ..." message from
LOG_DEBUG to LOG_INFO. Setting the logfile to LOG_NOTICE with this
change will have the same result as setting it to LOG_INFO without
this change. Setting it to LOG_INFO with this change will include
the useful "Processing event ..." messages that were previously at
LOG_DEBUG, without including useless messages like "Pushing table".
The intent of this change is that one can log "Processing event ..."
without logging "Pushing table" and related messages that are sent
for every event. The number of lines actually logged is reduced by
about 75% by making this change and setting syslog to LOG_INFO vs
setting syslog to LOG_DEBUG.
etc/syslog.conf
Changing the recommended loglevel to notice instead of info.
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
Increase the size of devd's client socket's send buffer from the
default (8k) to 128k. This prevents clients from getting
POLLHUPped during event storms. For example, during zpool creation,
the kernel emits a resource.fs.zfs.statechange event for every vdev
in the pool. A 128k buffer is large enough to hold the statechange
events for a pool with nearly 800 drives.
Reviewed by: ian, imp
Approved by: ken (mentor)
Sponsored by: Spectra Logic Corp
MFC after: 4 weeks
RFC 4402 specifies the implementation of the gss_pseudo_random()
function for the krb5 mechanism (and the C bindings therein).
The implementation uses a PRF+ function that concatenates the output
of individual krb5 pseudo-random operations produced with a counter
and seed. The original implementation of this function in Heimdal
incorrectly encoded the counter as a little-endian integer, but the
RFC specifies the counter encoding as big-endian. The implementation
initializes the counter to zero, so the first block of output (16 octets,
for the modern AES enctypes 17 and 18) is unchanged. (RFC 4402 specifies
that the counter should begin at 1, but both existing implementations
begin with zero and it looks like the standard will be re-issued, with
test vectors, to begin at zero.)
This is upstream's commit f85652af868e64811f2b32b815d4198e7f9017f6,
from 13 October, 2013:
% Fix krb5's gss_pseudo_random() (n is big-endian)
%
% The first enctype RFC3961 prf output length's bytes are correct because
% the little- and big-endian representations of unsigned zero are the
% same. The second block of output was wrong because the counter was not
% being encoded as big-endian.
%
% This change could break applications. But those applications would not
% have been interoperating with other implementations anyways (in
% particular: MIT's).
Approved by: hrs (mentor, src committer)
MFC after: 3 days
===
DEBUG: Running installation step: services
local: Not in a function
/usr/libexec/bsdinstall/services: cannot create : Read-only file system
/usr/libexec/bsdinstall/services: /tmp/bsdinstall/etc/rc.conf.services: \
Permission denied
===
The `local: Not in a function' is obvious, and was introduced by myself in
SVN revision 256348.
The latter two are caused by the attempt to use "\" to continue the line
after using the ">>" redirect. This appears to attempt to write a file with
the name " " in the current directory and subsequently attempts to execute
the file that was originally intended for writing (which is not executable;
hence the `Permission denied'). That was introduced in SVN r228192 about
2 years ago, apparently unnoticed until I started going over the debug
outputs very carefully.
MFC after: 3 days
