Commit Graph

36 Commits

Author SHA1 Message Date
Bjoern A. Zeeb
1d54aa3ba9 MFp4: 92972, 98913 + one more change
In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.
2006-12-12 12:17:58 +00:00
John Hay
80a684e083 Use net.inet6.ip6.redirect / ip6_sendredirects as part of the decision
to generate icmp6 redirects. Now it is possible to switch redirects off.

MFC after:	1 week
2006-09-05 19:20:42 +00:00
Brooks Davis
43bc7a9c62 With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.
2006-08-04 21:27:40 +00:00
Max Laier
656faadcb8 Remove ip6fw. Since ipfw has full functional IPv6 support now and - in
contrast to ip6fw - is properly lockes, it is time to retire ip6fw.
2006-05-12 20:39:23 +00:00
Bjoern A. Zeeb
1b34a059cb Assert ip6_forward_rt protected by Giant adding GIANT_REQUIRED to
functions not yet asserting it but working on global ip6_forward_rt
route cache which is not locked and perhaps should go away in the
future though cache hit/miss ration wasn't bad.

It's #if 0ed in frag6 because the code working on ip6_forward_rt is.
2006-05-04 18:41:08 +00:00
Christian S.J. Peron
604afec496 Somewhat re-factor the read/write locking mechanism associated with the packet
filtering mechanisms to use the new rwlock(9) locking API:

- Drop the variables stored in the phil_head structure which were specific to
  conditions and the home rolled read/write locking mechanism.
- Drop some includes which were used for condition variables
- Drop the inline functions, and convert them to macros. Also, move these
  macros into pfil.h
- Move pfil list locking macros intp phil.h as well
- Rename ph_busy_count to ph_nhooks. This variable will represent the number
  of IN/OUT hooks registered with the pfil head structure
- Define PFIL_HOOKED macro which evaluates to true if there are any
  hooks to be ran by pfil_run_hooks
- In the IP/IP6 stacks, change the ph_busy_count comparison to use the new
  PFIL_HOOKED macro.
- Drop optimization in pfil_run_hooks which checks to see if there are any
  hooks to be ran, and returns if not. This check is already performed by the
  IP stacks when they call:

        if (!PFIL_HOOKED(ph))
                goto skip_hooks;

- Drop in assertion which makes sure that the number of hooks never drops
  below 0 for good measure. This in theory should never happen, and if it
  does than there are problems somewhere
- Drop special logic around PFIL_WAITOK because rw_wlock(9) does not sleep
- Drop variables which support home rolled read/write locking mechanism from
  the IPFW firewall chain structure.
- Swap out the read/write firewall chain lock internal to use the rwlock(9)
  API instead of our home rolled version
- Convert the inlined functions to macros

Reviewed by:	mlaier, andre, glebius
Thanks to:	jhb for the new locking API
2006-02-02 03:13:16 +00:00
SUZUKI Shinsuke
f8a8f9ca5e supports stealth forwarding in IPv6, as well as in IPv4
PR: kern/54625
MFC after: 1 week
2005-08-10 09:13:35 +00:00
Hajimu UMEMOTO
a1f7e5f8ee scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
  scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
  scoped addresses as a special case.
- scope boundary check will be stricter.  For example, the current
  *BSD code allows a packet with src=::1 and dst=(some global IPv6
  address) to be sent outside of the node, if the application do:
    s = socket(AF_INET6);
    bind(s, "::1");
    sendto(s, some_global_IPv6_addr);
  This is clearly wrong, since ::1 is only meaningful within a single
  node, but the current implementation of the *BSD kernel cannot
  reject this attempt.

Submitted by:	JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from:	KAME
2005-07-25 12:31:43 +00:00
Warner Losh
caf43b0208 /* -> /*- for license, minor formatting changes, separate for KAME 2005-01-07 02:30:35 +00:00
Max Laier
d6a8d58875 Add an additional struct inpcb * argument to pfil(9) in order to enable
passing along socket information. This is required to work around a LOR with
the socket code which results in an easy reproducible hard lockup with
debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do
so later. The missing piece is to turn the filter locking into a leaf lock
and will follow in a seperate (later) commit.

This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in
forseeable future.

Suggested by:		rwatson
A lot of work by:	csjp (he'd be even more helpful w/o mentor-reviews ;)
Reviewed by:		rwatson, csjp
Tested by:		-pf, -ipfw, LINT, csjp and myself
MFC after:		3 days

LOR IDs:		14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Hajimu UMEMOTO
931282ced7 - call ip6_output() instead of nd6_output() when ipsec tunnel
mode is applied, since tunneled packets are considered to be
  generated packets from a tunnel encapsulating node.
- tunnel mode may not be applied if SA mode is ANY and policy
  does not say "tunnel it".  check if we have extra IPv6 header
  on the packet after ipsec6_output_tunnel() and call ip6_output()
  only if additional IPv6 header is added.
- free the copyed packet before returning.

Obtained from:	KAME
2004-02-19 14:57:22 +00:00
Andre Oppermann
26d02ca7ba Remove RTF_PRCLONING from routing table and adjust users of it
accordingly.  The define is left intact for ABI compatibility
with userland.

This is a pre-step for the introduction of tcp_hostcache.  The
network stack remains fully useable with this change.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 19:47:31 +00:00
Hajimu UMEMOTO
0f9ade718d - cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all.  secpolicy no longer contain
  spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy.  assign ID field to
  all SPD entries.  make it possible for racoon to grab SPD entry on
  pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header.  a mode is always needed
  to compare them.
- fixed that the incorrect time was set to
  sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
  because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
  alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
  XXX in theory refcnt should do the right thing, however, we have
  "spdflush" which would touch all SPs.  another solution would be to
  de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion.  ipsec_*_policy ->
  ipsec_*_pcbpolicy.
- avoid variable name confusion.
  (struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
  secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
  can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
  "src" of the spidx specifies ICMP type, and the port field in "dst"
  of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
  kernel forwards the packets.

Tested by:	nork
Obtained from:	KAME
2003-11-04 16:02:05 +00:00
Hajimu UMEMOTO
9a4f9608ad - change scope to zone.
- change node-local to interface-local.
- better error handling of address-to-scope mapping.
- use in6_clearscope().

Obtained from:	KAME
2003-10-21 20:05:32 +00:00
Hajimu UMEMOTO
31b3783c8d correct linkmtu handling.
Obtained from:	KAME
2003-10-20 15:27:48 +00:00
Hajimu UMEMOTO
953ad2fb67 nuke SCOPEDROUTING. Though it was there for a long time,
it was never enabled.
2003-10-10 16:04:00 +00:00
Hajimu UMEMOTO
7efe5d92ab - fix typo in comments.
- style.
- NULL is not 0.
- some variables were renamed.
- nuke unused logic.
(there is no functional change.)

Obtained from:	KAME
2003-10-08 18:26:08 +00:00
Sam Leffler
b140bc1fc8 Correct pfil_run_hooks return handling: if the return value is non-zero
then the mbuf has been consumed by a hook; otherwise beware of a null
mbuf return (gack).  In particular the bridge was doing the wrong thing.
While in the ipv6 code make it's handling of pfil_run_hooks identical
to netbsd.

Pointed out by:	Pyun YongHyeon <yongari@kt-is.co.kr>
2003-09-30 04:46:08 +00:00
Sam Leffler
134ea22494 o update PFIL_HOOKS support to current API used by netbsd
o revamp IPv4+IPv6+bridge usage to match API changes
o remove pfil_head instances from protosw entries (no longer used)
o add locking
o bump FreeBSD version for 3rd party modules

Heavy lifting by:	"Max Laier" <max@love2party.net>
Supported by:		FreeBSD Foundation
Obtained from:		NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
Sam Leffler
b9234fafa0 Tie new "Fast IPsec" code into the build. This involves the usual
configuration stuff as well as conditional code in the IPv4 and IPv6
areas.  Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).

As noted previously, don't use FAST_IPSEC with INET6 at the moment.

Reviewed by:	KAME, rwatson
Approved by:	silence
Supported by:	Vernier Networks
2002-10-16 02:25:05 +00:00
SUZUKI Shinsuke
88ff5695c1 just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by:	ume
MFC after:	1 week
2002-04-19 04:46:24 +00:00
Alfred Perlstein
72b1d826be Remove duplicate extern declarations to silence warnings. 2002-03-19 19:45:41 +00:00
Munechika SUMIKAWA
29529b7cc4 Back out cometic changes. This is for easily syncing with KAME in other BSDs. 2001-12-17 18:13:12 +00:00
Darren Reed
3a4d67f769 catch forwarded ipv6 packets with pfil_hooks for outbound things too 2001-10-15 14:16:18 +00:00
Hajimu UMEMOTO
3384154590 Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
  - The definitions of SADB_* in sys/net/pfkeyv2.h are still different
    from RFC2407/IANA assignment because of binary compatibility
    issue.  It should be fixed under 5-CURRENT.
  - ip6po_m member of struct ip6_pktopts is no longer used.  But, it
    is still there because of binary compatibility issue.  It should
    be removed under 5-CURRENT.

Reviewed by:	itojun
Obtained from:	KAME
MFC after:	3 weeks
2001-06-11 12:39:29 +00:00
Hajimu UMEMOTO
20cb9f9efe Make ip6fw as loadable module. 2000-09-23 18:50:59 +00:00
Jun-ichiro itojun Hagino
059e468480 s/IPSEC_IPV6FWD/IPSEC/. this avoids unexpected behavior on ipv6 fowarding.
(even if you ask for tunnel-mode encryption packets will go out in clear)
sync with kame.
2000-07-16 07:56:54 +00:00
Jun-ichiro itojun Hagino
261216553f correct compilation with IPSEC_IPV6FWD.
From: Ollivier Robert <roberto@keltia.freenix.fr>
2000-07-05 01:14:45 +00:00
Jun-ichiro itojun Hagino
686cdd19b1 sync with kame tree as of july00. tons of bug fixes/improvements.
API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
  (also syntax change)
2000-07-04 16:35:15 +00:00
Poul-Henning Kamp
eb95c536ad Remove unneeded #include <sys/kernel.h> 2000-04-29 15:36:14 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Yoshinobu Inoue
6a800098cc IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
Yoshinobu Inoue
cfa1ca9dfa udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-07 17:39:16 +00:00
Yoshinobu Inoue
e1da8747e7 Removed IPSEC and IPV6FIREWALL because they are not ready yet. 1999-11-23 05:42:36 +00:00
Yoshinobu Inoue
82cd038d51 KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-11-22 02:45:11 +00:00