functionality first appeared in FreeBSD.
Submitted by: Gordon Bergling gbergling_gmail.com
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D24677
sendto(2), sendmsg(2) and sendmmsg(2) return ENOTCONN if a destination
address is specified and the socket is not connected and the socket
protocol does not automatically connect ("implied connect"). Document
that. Also document the fact that the destination address is ignored
for connection-mode sockets if the socket is already connected.
PR: 245817
Submitted by: Erik Inge Bolsø <knan-bfo@modirum.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24530
Contrary to the kevent man page, EV_EOF on a fifo is not cleared by
EV_CLEAR. Modify the read and write filters to clear EV_EOF when the
fifo's PIPE_EOF flag is clear, and update the man page to document the
new behaviour.
Modify the write filter to return the amount of buffer space available
even if no readers are present. This matches the behaviour for sockets.
When reading from a pipe, only call pipeselwakeup() if some data was
actually read. This prevents the continuous re-triggering of a
EVFILT_READ event on EOF when in edge-triggered mode.
PR: 203366, 224615
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24528
In r326576 ("use @@@ instead of @@ in __sym_default"), an earlier version of
the phabricator-discussed patch was inadvertently committed. The commit
message claims that @@@ means that weak is not needed, but that was due to a
misunderstanding of the use of weak symbols in this context by the submitted
in the first draft of the patch; the description text was not updated to
match the discussion. As discussed in phabricator, weak is needed for
symbol interposing because of the behavior of our rtld, and is widely used
elsewhere in libc.
This partial revert restores the approved version of the patch and permits
symbol interposing for openat.
Reported by: Raymond Ramsden <rramsden AT isilon.com>
Reviewed by: dim, emaste, kib (2017)
Discussed with: kib (2020)
Differential Revision: https://reviews.freebsd.org/D11653
In the below-referenced PR, a case is attached of a simple reproducer that
exhibits suboptimal behavior: EVFILT_READ and EVFILT_WRITE being set in the
same kevent(2) call will only honor the first one. This is, in-fact, how
it's supposed to work.
A read of the manpage leads me to believe we could be more clear about this;
right now there's a logical leap to make in the relevant statement: "When
passed as input, it forces EV_ERROR to always be returned." -- the logical
leap being that this indicates the caller should have allocated space for
the change to be returned with EV_ERROR indicated in the events, or
subsequent filters will get dropped on the floor.
Another possible workaround that accomplishes similar effect without needing
space for all events is just setting EV_RECEIPT on the final change being
passed in; if any errored before it, the kqueue would not be drained. If we
made it to the final change with EV_RECEIPT set, then we would return that
one with EV_ERROR and still not drain the kqueue. This would seem to not be
all that advisable.
PR: 229741
MFC after: 1 week
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
sonewconn() emits debug-level messages when a listen socket's queue
overflows. Currently, sonewconn() tracks overflows on a global basis. It
will only log one message every 60 seconds, regardless of how many sockets
experience overflows. And, when it next logs at the end of the 60 seconds,
it records a single message referencing a single PCB with the total number
of overflows across all sockets.
This commit changes to per-socket overflow tracking. The code will now
log one message every 60 seconds per socket. And, the code will provide
per-socket queue length and overflow counts. It also provides a way to
change the period between log messages using a sysctl.
Reviewed by: jhb (previous version), bcr (manpages)
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24316
This had been introduced to ease any pain for using slightly older kernels
with a newer libc, e.g., for bisecting a kernel across the introduction of
shm_open2(2). 6 months has passed, retire the fallback and let shm_open()
unconditionally call shm_open2().
Stale includes are removed as well.
close_range(min, max, flags) allows for a range of descriptors to be
closed. The Python folk have indicated that they would much prefer this
interface to closefrom(2), as the case may be that they/someone have special
fds dup'd to higher in the range and they can't necessarily closefrom(min)
because they don't want to hit the upper range, but relocating them to lower
isn't necessarily feasible.
sys_closefrom has been rewritten to use kern_close_range() using ~0U to
indicate closing to the end of the range. This was chosen rather than
requiring callers of kern_close_range() to hold FILEDESC_SLOCK across the
call to kern_close_range for simplicity.
The flags argument of close_range(2) is currently unused, so any flags set
is currently EINVAL. It was added to the interface in Linux so that future
flags could be added for, e.g., "halt on first error" and things of this
nature.
This patch is based on a syscall of the same design that is expected to be
merged into Linux.
Reviewed by: kib, markj, vangyzen (all slightly earlier revisions)
Differential Revision: https://reviews.freebsd.org/D21627
This is an application of the kernel overflow fix from r357948 to
userspace, based on the algorithm developed by Bruce Evans. To keep
the ABI of the vds_timekeep stable, instead of adding the large_delta
member, MSB of both multipliers are added to quickly estimate the overflow.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
While here, drop an extra conjunction from the list of error
conditions for the remaining EIO description in symlink(2).
Discussed with: mckusick (trimming duplicates)
MFC after: 2 weeks
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
when a superblock check-hash error is detected. This change clarifies
a mount that failed due to media hardware failures (EIO) from a mount
that failed due to media errors (EINTEGRITY) that can be corrected by
running fsck(8).
Sponsored by: Netflix
From POSIX,
[ENOTSUP]
The implementation does not support the combination of accesses
requested in the prot argument.
This fits the case that prot contains permissions which are not a subset
of prot_max.
Reviewed by: brooks, cem
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23843
Also update comments for which architectures use 128 bit long doubles,
as appropriate.
The softfloat specialization routines weren't updated since they
appear to be from an upstream source which we may want to update in
the future to get a more favorable license.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
Update the man page to mention that extending a file with truncate(2)
is required by POSIX as of 2008.
Reviewed by: bcr
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23354
A new syscall sigfastblock(2) is added which registers a uint32_t
variable as containing the count of blocks for signal delivery. Its
content is read by kernel on each syscall entry and on AST processing,
non-zero count of blocks is interpreted same as the signal mask
blocking all signals.
The biggest downside of the feature that I see is that memory
corruption that affects the registered fast sigblock location, would
cause quite strange application misbehavior. For instance, the process
would be immune to ^C (but killable by SIGKILL).
With consumers (rtld and libthr added), benchmarks do not show a
slow-down of the syscalls in micro-measurements, and macro benchmarks
like buildworld do not demonstrate a difference. Part of the reason is
that buildworld time is dominated by compiler, and clang already links
to libthr. On the other hand, small utilities typically used by shell
scripts have the total number of syscalls cut by half.
The syscall is not exported from the stable libc version namespace on
purpose. It is intended to be used only by our C runtime
implementation internals.
Tested by: pho
Disscussed with: cem, emaste, jilles
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D12773
O_SEARCH is defined by POSIX [0] to open a directory for searching, skipping
permissions checks on the directory itself after the initial open(). This is
close to the semantics we've historically applied for O_EXEC on a directory,
which is UB according to POSIX. Conveniently, O_SEARCH on a file is also
explicitly undefined behavior according to POSIX, so O_EXEC would be a fine
choice. The spec goes on to state that O_SEARCH and O_EXEC need not be
distinct values, but they're not defined to be the same value.
This was pointed out as an incompatibility with other systems that had made
its way into libarchive, which had assumed that O_EXEC was an alias for
O_SEARCH.
This defines compatibility O_SEARCH/FSEARCH (equivalent to O_EXEC and FEXEC
respectively) and expands our UB for O_EXEC on a directory. O_EXEC on a
directory is checked in vn_open_vnode already, so for completeness we add a
NOEXECCHECK when O_SEARCH has been specified on the top-level fd and do not
re-check that when descending in namei.
[0] https://pubs.opengroup.org/onlinepubs/9699919799/
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23247
Prior to introduction of this op libc's readdir would call fstatfs(2), in
effect unnecessarily copying kilobytes of data just to check fs name and a
mount flag.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D23162
Treat it as a synonym for GRND_NONBLOCK. The reasoning is this:
We have two choices for handling Linux's GRND_INSECURE API flag.
1. We could ignore it completely (like GRND_RANDOM). However, this might
produce the surprising result of GRND_INSECURE requests blocking, when the
Linux API does not block.
2. Alternatively, we could treat GRND_INSECURE requests as requests for
GRND_NONBLOCk. Here, the surprising result for Linux programs is that
invocations with unseeded random(4) will produce EAGAIN, rather than
garbage.
Honoring the flag in the way Linux does seems fraught. If we actually use
the output of a random(4) implementation prior to seeding, we leak some
entropy (in an information theory and also practical sense) from what will
be the initial seed to attackers (or allow attackers to arbitrary DoS
initial seeding, if we don't leak). This seems unacceptable -- it defeats
the purpose of blocking on initial seeding.
Secondary to that concern, before seeding we may have arbitrarily little
entropy collected; producing output from zero or a handful of entropy bits
does not seem particularly useful to userspace.
If userspace can accept garbage, insecure, non-random bytes, they can create
their own insecure garbage with srandom(time(NULL)) or similar. Any program
which would be satisfied with a 3-bit key CTR stream has no need for CSPRNG
bytes. So asking the kernel to produce such an output from the secure
getrandom(2) API seems inane.
For now, we've elected to emulate GRND_INSECURE as an alternative spelling
of GRND_NONBLOCK (2). Consider this API not-quite stable for now. We
guarantee it will never block. But we will attempt to monitor actual port
uptake of this bizarre API and may revise our plans for the unseeded
behavior (prior stable/13 branching).
Approved by: csprng(markm), manpages(bcr)
See also: https://lwn.net/ml/linux-kernel/cover.1577088521.git.luto@kernel.org/
See also: https://lwn.net/ml/linux-kernel/20200107204400.GH3619@mit.edu/
Differential Revision: https://reviews.freebsd.org/D23130
This opens the door for other descriptor types to implement
posix_fallocate(2) as needed.
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D23042
As mandated by POSIX. Also clarify the kill(2) manpage.
While there, restructure the code in killpg1() to use helper which
keeps overall state of the process list iteration in the killpg1_ctx
structued, later used to infer the error returned.
Reported by: amdmi3
Reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D22621
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
While FreeBSD's implementation of these expect an int inside of libc, that's an
implementation detail that we can hide from the user as it's the natural
promotion of the current mode_t type and before it is used in the kernel, it's
converted back to the narrower type that's the current definition of mode_t. As
such, documenting int is at best confusing and at worst misleading. Instead add
a note that these args are variadic and as such calling conventions may differ
from non-variadic arguments.
promoted to ints).
- `mode_t` is `uint16_t` (`sys/sys/_types.h`)
- `openat` takes variadic args
- variadic args cannot be 16-bit, and indeed the code uses int
- the manpage currently kinda implies the argument is 16-bit by saying `mode_t`
Prompted by Rust things: https://github.com/tailhook/openat/issues/21
Submitted by: Greg V at unrelenting
Differential Revision: https://reviews.freebsd.org/D21816
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
Described in [1], signal handlers running in a vfork child have
opportunities to corrupt the parent's state. Address this by adding a new
rfork(2) flag, RFSPAWN, that has vfork(2) semantics but also resets signal
handlers in the child during creation.
x86 uses rfork_thread(3) instead of a direct rfork(2) because rfork with
RFMEM/RFSPAWN cannot work when the return address is stored on the stack --
further information about this problem is described under RFMEM in the
rfork(2) man page.
Addressing this has been identified as a prerequisite to using posix_spawn
in subprocess on FreeBSD [2].
[1] https://ewontfix.com/7/
[2] https://bugs.python.org/issue35823
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
When RFSPAWN is passed, rfork exhibits vfork(2) semantics but also resets
signal handlers in the child during creation to avoid a point of corruption
of parent state from the child.
This flag will be used by posix_spawn(3) to handle potential signal issues.
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
The two options are
* nocover/cover: Prevent/allow mounting over an existing root mountpoint.
E.g., "mount -t ufs -o nocover /dev/sd1a /usr/local" will fail if /usr/local
is already a mountpoint.
* emptydir/noemptydir: Prevent/allow mounting on a non-empty directory.
E.g., "mount -t ufs -o emptydir /dev/sd1a /usr" will fail.
Neither of these options is intended to be a default, for historical and
compatibility reasons.
Reviewed by: allanjude, kib
Differential Revision: https://reviews.freebsd.org/D21458
When SO_TIMESTAMP is set, the kernel will attempt to attach a timestamp as
ancillary data to each IP datagram that is received on the socket. However,
it may fail, for example due to insufficient memory. In that case the
packet will still be received but not timestamp will be attached.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21607
It allows a process to request that stack gap was not applied to its
stacks, retroactively. Also it is possible to control the gaps in the
process after exec.
PR: 239894
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21352
Previously userspace would issue one syscall to resolve the sysctl and then
another one to actually use it. Do it all in one trip.
Fallback is provided in case newer libc happens to be running on an older
kernel.
Submitted by: Pawel Biernacki
Reported by: kib, brooks
Differential Revision: https://reviews.freebsd.org/D17282
Although libc syscall wrappers do not get checked in this can aid in
finding the source of generated files when spelunking in the objdir.
Multiple tools use @generated to identify generated files (for example,
in a review Phabricator will by default hide diffs in generated files).
For consistency use the @generated tag in makesyscalls.sh as we've done
for other generated files, even though these wrappers aren't checked in
to the tree.
copy_file_range.2 is a new man page (content change).
Reviewed by: kib, asomers
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20584
This ptrace operation returns a structure containing the error and
return values from the current system call. It is only valid when a
thread is stopped during a system call exit (PL_FLAG_SCX is set).
The sr_error member holds the error value from the system call. Note
that this error value is the native FreeBSD error value that has _not_
been translated to an ABI-specific error value similar to the values
logged to ktrace.
If sr_error is zero, then the return values of the system call will be
set in sr_retval[0] and sr_retval[1].
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20901
Take part of the text from POSIX 2018 edition and describe the
atomicity requirements for read and write syscalls. See p1003.1-2018,
Vol.2, 2.9.7 Threads interaction with Regular File Operations.
Reviewed by: asomers
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D20867
feature bit.
In particular, allocate the bit to opt-out the image from implicit
PROTMAX enablement. Provide procctl(2) verbs to set and query
implicit PROTMAX handling. The knobs mimic the same per-image flag
and per-process controls for ASLR.
Reviewed by: emaste, markj (previous version)
Discussed with: brooks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D20795
In the case of mmap(), add a HISTORY section. Mention that mmap() and
mprotect()'s documentation predates an implementation. The
implementation first saw wide use in 4.3-Reno, but there seems to be no
easy way to express that in mdoc so stick with 4.4BSD.
Reviewed by: emaste
Requested by: cem
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20713
A new macro PROT_MAX() alters a protection value so it can be OR'd with
a regular protection value to specify the maximum permissions. If
present, these flags specify the maximum permissions.
While these flags are non-portable, they can be used in portable code
with simple ifdefs to expand PROT_MAX() to 0.
This change allows (e.g.) a region that must be writable during run-time
linking or JIT code generation to be made permanently read+execute after
writes are complete. This complements W^X protections allowing more
precise control by the programmer.
This change alters mprotect argument checking and returns an error when
unhandled protection flags are set. This differs from POSIX (in that
POSIX only specifies an error), but is the documented behavior on Linux
and more closely matches historical mmap behavior.
In addition to explicit setting of the maximum permissions, an
experimental sysctl vm.imply_prot_max causes mmap to assume that the
initial permissions requested should be the maximum when the sysctl is
set to 1. PROT_NONE mappings are excluded from this for compatibility
with rtld and other consumers that use such mappings to reserve
address space before mapping contents into part of the reservation. A
final version this is expected to provide per-binary and per-process
opt-in/out options and this sysctl will go away in its current form.
As such it is undocumented.
Reviewed by: emaste, kib (prior version), markj
Additional suggestions from: alc
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18880
The man page claims that with O_FSYNC (aka O_SYNC) the kernel will not cache
written data. However, that's not true. Nor does POSIX require it.
Perhaps it was true when that section of the man page was written in r69336
(I haven't checked). But it's not true now. Now the effect is simply that
writes are sent to disk immediately and synchronously, but they're still
cached.
See also: https://pubs.opengroup.org/onlinepubs/9699919799/
See also: ffs_write in sys/ufs/ffs/ffs_vnops.c
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20641
Historically we have not distinguished between kernel wirings and user
wirings for accounting purposes. User wirings (via mlock(2)) were
subject to a global limit on the number of wired pages, so if large
swaths of physical memory were wired by the kernel, as happens with
the ZFS ARC among other things, the limit could be exceeded, causing
user wirings to fail.
The change adds a new counter, v_user_wire_count, which counts the
number of virtual pages wired by user processes via mlock(2) and
mlockall(2). Only user-wired pages are subject to the system-wide
limit which helps provide some safety against deadlocks. In
particular, while sources of kernel wirings typically support some
backpressure mechanism, there is no way to reclaim user-wired pages
shorting of killing the wiring process. The limit is exported as
vm.max_user_wired, renamed from vm.max_wired, and changed from u_int
to u_long.
The choice to count virtual user-wired pages rather than physical
pages was done for simplicity. There are mechanisms that can cause
user-wired mappings to be destroyed while maintaining a wiring of
the backing physical page; these make it difficult to accurately
track user wirings at the physical page layer.
The change also closes some holes which allowed user wirings to succeed
even when they would cause the system limit to be exceeded. For
instance, mmap() may now fail with ENOMEM in a process that has called
mlockall(MCL_FUTURE) if the new mapping would cause the user wiring
limit to be exceeded.
Note that bhyve -S is subject to the user wiring limit, which defaults
to 1/3 of physical RAM. Users that wish to exceed the limit must tune
vm.max_user_wired.
Reviewed by: kib, ngie (mlock() test changes)
Tested by: pho (earlier version)
MFC after: 45 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19908
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
If dso uses initial exec TLS mode, rtld tries to allocate TLS in
static space. If there is no space left, the dlopen(3) fails. If space
if allocated, initial content from PT_TLS segment is distributed to
all threads' pcbs, which was missed and caused un-initialized TLS
segment for such dso after dlopen(3).
The mode is auto-detected either due to the relocation used, or if the
DF_STATIC_TLS dynamic flag is set. In the later case, the TLS segment
is tried to allocate earlier, which increases chance of the dlopen(3)
to succeed. LLD was recently fixed to properly emit the flag, ld.bdf
did it always.
Initial test by: dumbbell
Tested by: emaste (amd64), ian (arm)
Tested by: Gerald Aryeetey <aryeeteygerald_rogers.com> (arm64)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19072
According to 0mp, macros are not expanded in the argument provided to
-width. Use plain identifiers for width specification.
Noted and reviewed by: 0mp
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D19308
back to the lever before r343030. For 64-bit machines reduce it slightly,
too. Together with r343030 I bumped the limit up to the value we use at
Netflix to serve 100 Gbit/s of sendfile traffic, and it probably isn't a
good default.
Provide a loader tunable to change vnode pager pbufs count. Document it.
This is meant to clarify the fact that the system call will not fail
with -1/EFAULT, as one might expect, when reading the sendfile(2)
manpage today.
While here, pet the mandoc linter, when dealing with the section that
describes valid values for `flags`.
PR: 232210
MFC after: 2 weeks
Approved by: emaste (mentor)
Reviewed by: glebius, 0mp
Differential Revision: https://reviews.freebsd.org/D18949
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
Based on the description in Linux man page.
Reviewed by: markj, ngie (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18837
from the local mapping.
Enable the setting by default.
The article behind the change: https://arxiv.org/abs/1901.01161
Reviewed by: markj
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18764
As it does for recv*(2), MSG_DONTWAIT indicates that the call should
not block, returning EAGAIN instead. Linux and OpenBSD both implement
this, so the change makes porting easier, especially since we do not
return EINVAL or so when unrecognized flags are specified.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: tuexen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18728
There is no reason for it to behave differently from openat(fd, NULL).
Also the handling did not worked because the substituted path was from
the system address space, causing EFAULT.
Submitted by: Jack Halford <jack@gandi.net>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18501
The list of syscalls that modify st_atim, st_mtim, and st_ctim was quite out
of date and probably not accurate to begin with. Update it, and make it
clear that the list is open-ended.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18410
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
paths.
It was decided that committing the code and drafting of the man page
update is better than allowing the code to rot until wordsmithing
happens.
Reviewed by: jilles (previous version)
Discussed with: brooks, jilles, emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17714
The comment isn't stale. The check is bogus in the sense that poll(2)
does not require pollfd entries to be unique in fd space, so there is no
reason there cannot be more pollfd entries than open or even allowed
fds. The check is mostly a seatbelt against accidental misuse or
abuse. FD_SETSIZE, while usually unrelated to poll, is used as an
arbitrary floor for systems with very low kern.maxfilesperproc.
Additionally, document this possible EINVAL condition in the poll.2
manual.
No functional change.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17671
timezone offset. These values are generally zero.
While one still theoreticall could set these values, that's almost
never done. Users wishing to have an offset between the time of day
clock hardware and UTC use adjkerntz(8) instead.
localtime(3) should be used to find these values for the current
timezone.
Flags prevent open(2) and *at(2) vfs syscalls name lookup from
escaping the starting directory. Supposedly the interface is similar
to the same proposed Linux flags.
Reviewed by: jilles (code, previous version of manpages), 0mp (manpages)
Discussed with: allanjude, emaste, jonathan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17547
There are multiple ways to wait for any child process to return a
status (e.g., waitpid(-1, ...), waitid(P_ALL, ...)), so don't be so
specific.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
the domain of a socket.
This is helpful when testing and Solaris and Linux have the same
socket option using the same name.
Reviewed by: bcr@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16791
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
Contrary to the removed comment, the kernel does appear to use the timezone
argument of settimeofday. The comment dates to the BSD4.4 import; I assume it
is just stale.
If a timer is updated (re-added) with a different time period
(specified in the .data field of the kevent), the new time period has
no effect; the timer will not expire until the original time has
elapsed. This violates the documented behavior as the kqueue(2) man
page says (in part) "Re-adding an existing event will modify the
parameters of the original event, and not result in a duplicate
entry."
This modification, adapted from a patch submitted by cem@ to PR214987,
fixes the kqueue system to allow updating a timer entry. The
kevent timer behavior is changed to:
* When a timer is re-added, update the timer parameters to and
re-start the timer using the new parameters.
* Allow updating both active and already expired timers.
* When the timer has already expired, dequeue any undelivered events
and clear the count of expirations.
All of these changes address the original PR and also bring the
FreeBSD and macOS kevent timer behaviors into agreement.
A few other changes were made along the way:
* Update the kqueue(2) man page to reflect the new timer behavior.
* Fix man page style issues in kqueue(2) diagnosed by igor.
* Update the timer libkqueue system test to test for the updated
timer behavior.
* Fix the (test) libkqueue common.h file so that it includes
config.h which defines various HAVE_* feature defines, before the
#if tests for such variables in common.h. This enables the use of
the actual err(3) family of functions.
* Fix the usages of the err(3) functions in the tests for incorrect
type of variables. Those were formerly undiagnosed due to the
disablement of the err(3) functions (see previous bullet point).
PR: 214987
Reported by: Brian Wellington <bwelling@xbill.org>
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15778
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.
Noted and reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16142
No valid FreeBSD binary very called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
This is a respin of r335983 with a workaround for the ancient BFD linker
in the libc stubs.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16193
RB_ASKNAME is no longer instructions to the boot loader to request a
prompt for which kernel to boot. Instead, it asks for what the root
file system to use. RB_INITNAME is unused, and never has been in
FreeBSD as far as I can tell. Remove it from the documentation and fix
comment. RB_SELFTEST and RB_MINIROOT likewise (though they were
completely undocumented). These last three constants can likely just
be deleted as nothing references them (even to set useless bits).
RB_ASKNAME doesn't actually survive reboot, however, so needs to be
communicated to the bootloader via other means. If the bootloader sets
it, though, it will be honored.
No valid FreeBSD binary ever called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15814
Add vertical space between struct definition and function prototype.
Use "NULL" to describe zero pointers, instead of "zero."
Remove perhaps unclear "can not" and replace. Tag struct member names used
with appropriate tags.
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Previously, libc.so would initialize its notion of the break address
using _end, a special symbol emitted by the static linker following
the bss section. Compatibility issues between lld and ld.bfd could
cause the wrong definition of _end (libc.so's definition rather than
that of the executable) to be used, breaking the brk()/sbrk()
interface.
Avoid this problem and future interoperability issues by simply not
relying on _end. Instead, modify the break() system call to return
the kernel's view of the current break address, and have libc
initialize its state using an extra syscall upon the first use of the
interface. As a side effect, this appears to fix brk()/sbrk() usage
in executables run with rtld direct exec, since the kernel and libc.so
no longer maintain separate views of the process' break address.
PR: 228574
Reviewed by: kib (previous version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D15663
Summary:
Added ptrace support for getting/setting the remaining part of the VSX registers
(the part that's not already covered by FPR or VR registers).
This is necessary to add support for VSX registers in debuggers.
Submitted by: Luis Pires
Differential Revision: https://reviews.freebsd.org/D15458
Super pages are supported on non-x86 architectures, so just remove the
incorrect note. While here, change terminology to be consistent with
mmap.2.
MFC after: 1 week
The vadvise syscall (aka ovadvise) is undocumented and has always been
implmented as returning EINVAL. Put the syscall under COMPAT11 and
provide a userspace implementation.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15557
More firmly suggest mmap(2) instead.
Include the history of arm64 and riscv shipping without brk/sbrk.
Mention that sbrk(0) produces unreliable results.
Reviewed by: emaste, Marcin Cieślak
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15535
Each TCP connection that uses the system default cc_newreno(4) congestion
control algorithm module leaks a "struct newreno" (8 bytes of memory) at
connection initialisation time. The NULL-pointer dereference is only germane
when using the ABE feature, which is disabled by default.
While at it:
- Defer the allocation of memory until it is actually needed given that ABE is
optional and disabled by default.
- Document the ENOMEM errno in getsockopt(2)/setsockopt(2).
- Document ENOMEM and ENOBUFS in tcp(4) as being synonymous given that they are
used interchangeably throughout the code.
- Fix a few other nits also accidentally omitted from the original patch.
Reported by: Harsh Jain on freebsd-net@
Tested by: tjh@
Differential Revision: https://reviews.freebsd.org/D15358
Discovered during investigation into the PR - the description of
AT_FDCWD was somewhat confusing.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 1 week
-> PROC_PDEATHSIG_STATUS for consistency with other procctl(2)
operations names.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
Allow processes to request the delivery of a signal upon death of
their parent process. Supposed consumer of the feature is PostgreSQL.
Submitted by: Thomas Munro
Reviewed by: jilles, mjg
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15106
On older kernels, when userspace program disables SIGSYS, catch ENOSYS and
emulate getrandom(2) syscall with the kern.arandom sysctl (via existing
arc4_sysctl wrapper).
Special care is taken to faithfully emulate EFAULT on NULL pointers, because
sysctl(3) as used by kern.arandom ignores NULL oldp. (This was caught by
getentropy(3) ATF tests.)
Reported by: kib
Reviewed by: kib
Discussed with: delphij
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14785
The general idea here is to provide userspace programs with well-defined
sources of entropy, in a fashion that doesn't require opening a new file
descriptor (ulimits) or accessing paths (/dev/urandom may be restricted
by chroot or capsicum).
getrandom(2) is the more general API, and comes from the Linux world.
Since our urandom and random devices are identical, the GRND_RANDOM flag
is ignored.
getentropy(3) is added as a compatibility shim for the OpenBSD API.
truss(1) support is included.
Tests for both system calls are provided. Coverage is believed to be at
least as comprehensive as LTP getrandom(2) test coverage. Additionally,
instructions for running the LTP tests directly against FreeBSD are provided
in the "Test Plan" section of the Differential revision linked below. (They
pass, of course.)
PR: 194204
Reported by: David CARLIER <david.carlier AT hardenedbsd.org>
Discussed with: cperciva, delphij, jhb, markj
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D14500
POSIX defines no macros for these permissions.
Also remove unneeded headers from synopsis.
PR: 225905
Reviewed by: wblock
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14461
POSIX explicitly states that the application must declare union semun.
This makes no sense, but it is what it is. This brings us into line
with Linux, MacOS/Darwin, and NetBSD.
In a ports exp-run a moderate number of ports fail due to a lack of
approprate autotools-like discovery mechanisms or local patches. A
commit to address them will follow shortly.
PR: 224300, 224443 (exp-run)
Reviewed by: emaste, jhb, kib
Exp-run by: antoine
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14492
This deliberately breaks the API in preperation for future syscall
revisions which will remove these nonstandard members.
In an exp-run a single port (devel/qemu-user-static) was found to
use them which it did becuase it emulates system calls. This has
been fixed in the ports tree.
PR: 224443 (exp-run)
Reviewed by: kib, jhb (previous version)
Exp-run by: antoine
Sponsored by: DARPA, AFRP
Differential Revision: https://reviews.freebsd.org/D14490
utilities is done by calling gr_addgid() for each group to be
added (usually found by traversing /etc/group) then calling the
setgroups() system call after the group set has been created.
The gr_addgid() function (helpfully?) deduplicates the addition
of group members. So, if you call it to add a group member that
already exists, it is just dropped. Because group[0] is the
effective group-ID and is over-written when a setgid program
is run, The value in group[0] is usually duplicated so that
group value is not lost when a setgid program is run.
Historically this happened because the group value indicated
in the password file also appears in /etc/group (e.g., if you
are group staff in the password file, you will also appear in
the staff line in /etc/group). But, with the addition of the
deduplication, the attempt to add group staff was lost because
it already appeared in group[0]. So, the fix is to deduplicate
starting from group[1] which allows a duplicate of the entry in
group[0], but not in later entries.
There is some confusion about the setgroups system call because in
BSD it has (always) set the entire group including the egid group
(in group[0]). However, in Linux, it skips over group[0] and starts
setting from group[1]. See this comment from linux_setgroups:
/*
* cr_groups[0] holds egid. Setting the whole set from
* the supplied set will cause egid to be changed too.
* Keep cr_groups[0] unchanged to prevent that.
*/
To make it clear what the BSD setgroups system call does, I
added the following paragraph to the setgroups(2) manual page:
The first entry of the group array (gidset[0]) is used as the effective
group-ID for the process. This entry is over-written when a setgid
program is run. To avoid losing access to the privileges of the
gidset[0] entry, it should be duplicated later in the group array.
By convention, this happens because the group value indicated in the
password file also appears in /etc/group. The group value in the
password file is placed in gidset[0] and that value then gets added a
second time when the /etc/group file is scanned to create the group set.
Reported by: Paul McMath paulm at tetrardus.net
Reviewed by: kib
MFC after: 2 weeks
The man page is years out of date regarding errors. Our implementation _does_
allow unaligned addresses, and it _does_not_ check for negative lengths,
because the length is unsigned. It checks for overflow instead.
Update the tests accordingly.
Reviewed by: bcr
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13826
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Using
.symver foo,foo@@VER
causes foo and foo@@VER to be output to the .o file. This requires foo
to be weak since the linker handles foo@@VER as foo.
Using
.symver foo,foo@@@VER
causes just foo@@ver to be output and avoid the need for making foo
weak. It also reduces the constraint on how exactly a linker has to
handle foo and foo@@VER being present.
Submitted by: Rafael Espíndola
Reviewed by: dim, kib
Differential Revision: https://reviews.freebsd.org/D11653
system calls. Man pages are missing for v2 and v5, so any entries for
those versions were inferred by new implementations of these functions
in libc.
Obtained from: http://www.tuhs.org/cgi-bin/utree.pl
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Do not use macros in the -width of a .Bl, since mandoc does not support them.
Fix issues reported by igor and mandoc -Tlint.
Use a .Bl for list of clock IDs instead of a comma list.
MFC after: 3 days
Sponsored by: Dell EMC
As of r325320 posix_fallocate returns EINVAL on ZFS to indicate that
the underlying filesystem does not support this operation, per
POSIX.1-2008. Document this case in the man page.
MFC after: 20 days
MFC with: r325320
Sponsored by: The FreeBSD Foundation
RB_POWERCYCLE instructs the platform to power off and then power back
on a short time later, if that's possible. Otherwise, degrade to the
RB_POWEROFF behavior.
Sponsored by: Netflix
In r322258 I made p1003_1b.aio_listio_max a tunable. However, further
investigation shows that there was never any good reason for that limit to
exist in the first place. It's used in two completely different ways:
* To size a UMA zone, which globally limits the number of concurrent
aio_suspend calls.
* To artifically limit the number of operations in a single lio_listio call.
There doesn't seem to be any memory allocation associated with this limit.
This change does two things:
* Properly names aio_suspend's UMA zone, and sizes it based on a new constant.
* Eliminates the artifical restriction on lio_listio. Instead, lio_listio
calls will now be limited by the more generous max_aio_queue_per_proc. The
old p1003_1b.aio_listio_max is now an alias for
vfs.aio.max_aio_queue_per_proc, so sysconf(3) will still work with
_SC_AIO_LISTIO_MAX.
Reported by: bde
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12120
In FreeBSD 11 and later debug.iosize_max_clamp defaults to 0, and the
maximum nbytes count for write(2) is SSIZE_MAX. Update the man page to
document this, and mention the sysctl that can be set to obtain the
previous behaviour.
PR: 196666
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
posix_fallocate is logically equivalent to writing zero blocks to the
desired file size and there is no reason to prevent calling it in
capability mode. posix_fallocate already checked for the CAP_WRITE
right, so we merely need to list it in capabilities.conf.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12640
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
After r308212 Capsicum permits .. lookups in capability mode, as long as
path component traversal does not escape the directory corresponding to
the provided file descriptor.
We should add a description of the vfs.lookup_cap_dotdot and
vfs.lookup_cap_dotdot_nonlocal sysctls, perhaps as a cross-reference to
capsicum(4). I intend to look at that soon.
Reviewed by: bjk, cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12343
S_IRUSR is defined in sys/stat.h
PR: 209229
Submitted by: <mt AT markoturk DOT info>
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12007
Private functions like __aio_read and _aio_read were exposed in
FBSDprivate_1.0 by r169090, even though they've never been used outside of
librt. Also, remove some weak references from r156136 that have never
resolved.
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11649
Guard, requested by the MAP_GUARD mmap(2) flag, prevents the reuse of
the allocated address space, but does not allow instantiation of the
pages in the range. It is useful for more explicit support for usual
two-stage reserve then commit allocators, since it prevents accidental
instantiation of the mapping, e.g. by mprotect(2).
Use guards to reimplement stack grow code. Explicitely track stack
grow area with the guard, including the stack guard page. On stack
grow, trivial shift of the guard map entry and stack map entry limits
makes the stack expansion. Move the code to detect stack grow and
call vm_map_growstack(), from vm_fault() into vm_map_lookup().
As result, it is impossible to get random mapping to occur in the
stack grow area, or to overlap the stack guard page.
Enable stack guard page by default.
Reviewed by: alc, markj
Man page update reviewed by: alc, bjk, emaste, markj, pho
Tested by: pho, Qualys
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11306 (man pages)
The flag is not implemented, all FreeBSD architectures correctly
handle locks on normal cacheable mappings. On the other hand, the
flag was specified by some software, so it is kept in the header as
nop. Removal from the man page should discourage its use.
Reviewed by: alc, bjk, emaste, markj, pho
MFC after: 3 days
X-Differential revision: https://reviews.freebsd.org/D11306
Add forward compatibility so that new binaries can run on old
kernels. If the new system call from ino64 isn't available on your
system, then the old one will be used and the results translated. The
stat and statfs families of functions are fully emulated. While not
required by policy, in this case it is helpful to our users to provide
this compatibility. In this case, it allows rollback of the kernel
after installing a new userland should a problem be discovered. It
also prevents foot-shooting if a user does an install before rebooting
with the new kernel. Finally, it allows the use case where one needs
to run new binaries on an old kernel as part of an upgrade process.
The getdirentries family uses tricks that may not work on remote
filesystems. Specifically, it uses a buffer 1/4 the size requested to
get the data from he old syscall.
The code carefully uses direct syscalls for old system calls to avoid
referencing freebsd11_* symbols, which contaminate ld-elf.so.1's
export table due to its use of stat functions, which causes errno to
be incorrect in client programs due to the wrong *stat* function being
resolved in some cases.
This code should removed sometime after 12 is branched.
Tested on: 12-current binaries on a 10.3-beta kernel run and return
consistent results. 12-current kernel and userland with
packages from before ino64 was committed also work.
Differential Revision: https://reviews.freebsd.org/D11185
Reviewed by: kib@, emaste@
This syscall has never existed and is not at risk of existing any time soon.
Remove documentation referencing it, which has been wrong since FreeBSD 9.
Reported by: allanjude@
This change implements NOTE_ABSTIME flag for EVFILT_TIMER, which
specifies that the data field contains absolute time to fire the
event.
To make this useful, data member of the struct kevent must be extended
to 64bit. Using the opportunity, I also added ext members. This
changes struct kevent almost to Apple struct kevent64, except I did
not changed type of ident and udata, the later would cause serious API
incompatibilities.
The type of ident was kept uintptr_t since EVFILT_AIO returns a
pointer in this field, and e.g. CHERI is sensitive to the type
(discussed with brooks, jhb).
Unlike Apple kevent64, symbol versioning allows us to claim ABI
compatibility and still name the new syscall kevent(2). Compat shims
are provided for both host native and compat32.
Requested by: bapt
Reviewed by: bapt, brooks, ngie (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D11025
The futimens() and utimensat() compat stubs allowed using these functions on
kernels that did not have the system calls yet (10.2, old 11-current).
Also remove the documentation of the [ENOTSUP] error that could occur with
an old kernel.
A -DNO_CLEAN build may fail because the depend files refer to the deleted
files.
The documentation moved to section 3 several years ago, but
'man cap_rights_get' pulls up cap_rights_limit(2) (which is
MLINKed to cap_rights_get.2) instead of cap_rights_get(3).
MFC after: 1 week
bhyve was recently sandboxed with capsicum, and needs to be able to
control the CPU sets of its vcpu threads
Reviewed by: emaste, oshogbo, rwatson
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D10170
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
- Sort .Xr entries in SEE ALSO section.
- Sort SEE ALSO and STANDARDS sections properly, in terms of the
entire document.
Reported by: make manlint
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The previous misuse of sys_sigqueue() was sending random register or
stack garbage to 64-bit targets. The freebsd32 implementation preserves
the sival_int member of value when signaling a 64-bit process.
Document the mixed ABI implementation of union sigval and the
incompability of sival_ptr with pointer integrity schemes.
Reviewed by: kib, wblock
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10605
Add the CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID clock_id
values to the clock_gettime(2) man page. Reformat the excessively
long paragraph (sentence!) into a tag list.
Reported by: jilles in https://reviews.freebsd.org/D10020
MFC after: 3 days
Sponsored by: Dell EMC
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
INHERIT_ZERO is an OpenBSD feature.
When a page is marked as such, it would be zeroed
upon fork().
This would be used in new arc4random(3) functions.
PR: 182610
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D427
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Now that <sys/event.h> can be included on its own, adjust the manual
page accordingly. Remove both unnecessary #include statements from the
synopsis and the example code.
While there, also add a note to the BUGS section to mention that
previous versions of this header file still depend on <sys/types.h>.
Reviewed by: ngie, vangyzen
Differential Revision: https://reviews.freebsd.org/D9605
For regular files and posix shared memory, POSIX requires that
[offset, offset + size) range is legitimate. At the maping time,
check that offset is not negative. Allowing negative offsets might
expose the data that filesystem put into vm_object for internal use,
esp. due to OFF_TO_IDX() signess treatment. Fault handler verifies
that the mapped range is valid, assuming that mmap(2) checked that
arithmetic gives no undefined results.
For device mappings, leave the semantic of negative offsets to the
driver. Correct object page index calculation to not erronously
propagate sign.
In either case, disallow overflow of offset + size.
Update mmap(2) man page to explain the requirement of the range
validity, and behaviour when the range becomes invalid after mapping.
Reported and tested by: royger (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Document AF_UNIX control messages in unix(4) only, not split between unix(4)
and recv(2).
Also, warn about LOCAL_CREDS effective uid/gid fields, since the write could
be from a setuid or setgid program (with the explicit SCM_CREDS and
LOCAL_PEERCRED, the credentials are read at such a time that it can be
assumed that the process intends for them to be used in this context).
Reviewed by: wblock
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9298
This reduces build output, need for recalculating paths, and makes it clearer
which paths are relative to what areas in the source tree. The change in
performance over a locally mounted UFS filesystem was negligible in my testing,
but this may more positively impact other filesystems like NFS.
LIBC_SRCTOP was left alone so Juniper (and other users) can continue to
manipulate lib/libc/Makefile (and other Makefile.inc's under lib/libc) as
include Makefiles with custom options.
Discussed with: marcel, sjg
MFC after: 1 week
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9207
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.
- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.
- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().
- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.
- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.
- How rate limiting works:
1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.
2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.
3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.
4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.
Reviewed by: wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision: https://reviews.freebsd.org/D3687
Sponsored by: Mellanox Technologies
MFC after: 3 months
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:
o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).
In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.
Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.
This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.
There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.
Reviewed by: adrian, gnn
Differential Revision: https://reviews.freebsd.org/D9171
This argument is not a bitmask of flags, but only accepts a single value.
Fail with EINVAL if an invalid value is passed to 'flag'. Rename the
'flags' argument to getmntinfo(3) to 'mode' as well to match.
This is a followup to r308088.
Reviewed by: kib
MFC after: 1 month
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
Polish pthread_set_name_np(3) and add a .Xr to thr_set_name(2)
so the user might find the documentation for this behavior.
Reviewed by: jilles
MFC after: 3 days
Sponsored by: Dell EMC
As of r234483, vnode deactivation causes non-VPO_NOSYNC pages to be
laundered. This behaviour has two problems:
1. Dirty VPO_NOSYNC pages must be laundered before the vnode can be
reclaimed, and this work may be unfairly deferred to the vnlru process
or an unrelated application when the system is under vnode pressure.
2. Deactivation of a vnode with dirty VPO_NOSYNC pages requires a scan of
the corresponding VM object's memq for non-VPO_NOSYNC dirty pages; if
the laundry thread needs to launder pages from an unreferenced such
vnode, it will reactivate and deactivate the vnode with each laundering,
potentially resulting in a large number of expensive scans.
Therefore, ensure that all dirty pages are laundered upon deactivation,
i.e., when all maps of the vnode are removed and all references are
released.
Reviewed by: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8641
We return [EMLINK] instead of [ELOOP] when trying to open a symlink with
O_NOFOLLOW, so that the original case of [ELOOP] can be distinguished. Code
like cmp -h and xz takes advantage of this.
PR: 214633
Reviewed by: kib, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8586
do any speculations about readahead, and use exactly the amount of readahead
specified by user. E.g. setting SF_FLAGS(0, SF_USER_READAHEAD) will guarantee
that no readahead at all will be performed.
Previously the flag returned by cap_getmode was not described explicitly
in the man page.
Reviewed by: wblock
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7822
The initial value of NOASM is nearly the same in all cases and the
initial value of PSEUDO is the same in all cases so reduce duplication
(and hopefully, future merge conflicts) by machine independent defaults.
Also document the PSEUDO variable.
Reviewed by: jhb, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7820
Besides removing hand-translation to assembler, this also adds missing
wrappers for arm64 and risc-v.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7694