Commit Graph

43 Commits

Author SHA1 Message Date
John Baldwin
284b6708c4 - Use swi_remove() to teardown swi handlers rather than
intr_event_remove_handler().
- Remove tty: prefix from a couple of swi handler names.
2005-10-26 15:52:16 +00:00
Peter Grehan
f94061b759 Catch up with interrupt-thread changes. 2005-10-25 21:31:22 +00:00
Poul-Henning Kamp
7423b2b40c Make ttyconsolemode() call ttsetwater() so that drivers don't have to. 2005-10-16 20:58:22 +00:00
Marius Strobl
d74b306146 The zs(4) driver is superseded by uart(4) and broken in -CURRENT. Remove
it from the sparc64 kernel config files and delete its fhc(4) and sbus(4)
front-end.

Agreed with:	marcel
2005-02-27 15:23:58 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
John Baldwin
9b94662d59 Fix a typo so that this compiles again. 2004-10-20 16:22:00 +00:00
Poul-Henning Kamp
95bc568977 Add new function ttyinitmode() which sets our systemwide default
modes on a tty structure.

Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.

The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.

Use the new function throughout.
2004-10-18 21:51:27 +00:00
Poul-Henning Kamp
9e51d6f15d Use tty->t_sc to find out softc. 2004-09-18 16:43:44 +00:00
Poul-Henning Kamp
a45b36ad47 Use ttyalloc() instead of ttymalloc(NULL) 2004-09-17 07:28:07 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Poul-Henning Kamp
672c05d49c Preparation commit for the tty cleanups that will follow in the near
future:

rename ttyopen() -> tty_open() and ttyclose() -> tty_close().

We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
2004-07-15 20:47:41 +00:00
Marcel Moolenaar
5ff374a09a Update for the KDB framework:
o  Make debugging code conditional upon KDB instead of DDB.
o  Call kdb_alt_break() insteadof db_alt_break().
2004-07-10 21:18:33 +00:00
Mark Peek
213fbd7666 Fix build: the return type for t_break changed from int to void. 2004-07-01 15:19:08 +00:00
Poul-Henning Kamp
45671a9eb6 Use generic routines for BREAK and modem control ioctls.
This eliminates the need for a local ioctl method.
2004-06-25 20:33:52 +00:00
Peter Grehan
40cdee9dab Catchup to now-required <sys/module.h> for PowerPC 2004-06-25 13:42:48 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
2140d01b27 Machine generated patch which changes linedisc calls from accessing
linesw[] directly to using the ttyld...() functions

The ttyld...() functions ar inline so there is no performance hit.
2004-06-04 16:02:56 +00:00
Poul-Henning Kamp
e451f9b758 Make the remaining serial drivers call ttyioctl() rather than calling
the linedisc directly.
2004-06-04 08:02:37 +00:00
Poul-Henning Kamp
186f2b9e04 Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
8e1f1df080 Device megapatch 3/6:
Add missing D_TTY flags to various drivers.

Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.

Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
2004-02-21 20:41:11 +00:00
Pawel Jakub Dawidek
e493da7e6f Fix wrong check.
Approved by:	jake, scottl (mentor)
2004-02-05 09:50:57 +00:00
Seigo Tanimura
512824f8f7 - Implement selwakeuppri() which allows raising the priority of a
thread being waken up.  The thread waken up can run at a priority as
  high as after tsleep().

- Replace selwakeup()s with selwakeuppri()s and pass appropriate
  priorities.

- Add cv_broadcastpri() which raises the priority of the broadcast
  threads.  Used by selwakeuppri() if collision occurs.

Not objected in:	-arch, -current
2003-11-09 09:17:26 +00:00
Poul-Henning Kamp
3f99f14bf1 OK, I messed up /dev/console with what I had hoped would be compat
code.  Convert remaining console drivers and hope for the best.
2003-09-26 19:35:50 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
3d11ce04c6 s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev 2003-08-23 00:11:16 +00:00
Thomas Moestl
5ff9e59f71 Fix a signedness problem in zstty_cncheckc(): when no character is ready,
-1 should be returned, but it was assigned to an uint8_t (which is
extended to an int to form the return value), causing 255 to be returned
instead.
2003-07-05 01:31:30 +00:00
Poul-Henning Kamp
d42ee4e410 Note that MAJOR_AUTO is now the default if d_maj is not initialized. This
is more robust and prevents the hijacking of /dev/console for the typical
mistake.

Remove unneeded MAJOR_AUTO uses, it is only needed explicitly now if the
driver source has cross-branch compatibility to old releases.
2003-03-09 11:03:45 +00:00
Poul-Henning Kamp
182a9f7455 Make nokqfilter() return the correct return value.
Ditch the D_KQFILTER flag which was used to prevent calling NULL pointers.
2003-03-03 16:24:47 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Jake Burkholder
3fb37429df Use MAJOR_AUTO. GC statically assigned majors. 2003-02-28 04:21:13 +00:00
Poul-Henning Kamp
263444cfbf Change the console interface to pass a "struct consdev *" instead of a
dev_t to the method functions.

The dev_t can still be found at struct consdev *->cn_dev.

Add a void *cn_arg element to struct consdev which the drivers can use
for retrieving their softc.
2003-02-20 20:54:45 +00:00
Jake Burkholder
eba43df47a Munge the zs sbus attachment to work with fhc. This is a bit of a hack,
but they would otherwise be almost identical so there's not much point in
splitting it up further.
2003-02-19 08:29:17 +00:00
Benno Rice
0faf0e2a30 MacIO frontend for the zs driver.
Many thanks to jake for doing the initial driver and for helping me in making
this work.
2003-02-01 07:23:47 +00:00
Benno Rice
a42a7e2f13 Set the termios speed based on the tty speed. This allows consoles to work at
speeds other than TTYDEF_SPEED.

Approved by:	jake
2003-01-29 02:43:35 +00:00
Jake Burkholder
6c5b0e25a0 Allow defaulting the console to ttya when it sets to screen and keyboard
in the prom but no keyboard is plugged in.
2003-01-26 01:56:20 +00:00
Jake Burkholder
776c5378cb Reset the channel in attach if its not the console. 2003-01-11 04:15:46 +00:00
Jake Burkholder
6bfa8a2ef2 Split this into bus specific front end(s), so that it can be used by ppc.
This abstracts out all the differences I could see between the netbsd
sparc64 and macppc zs drivers.   In particular the offsets of the csr and
data registers are different, so we use a separate bus handle for each and
use bus_space_subregion to add the bus specific offsets.

Requested by:	benno
2003-01-08 23:36:16 +00:00
Jake Burkholder
a6517875d0 Use bus_space_subregion to add offsets to bus handles instead of doing
it manually.
2003-01-08 04:30:30 +00:00
Jake Burkholder
777cc88b9d - This damnable chip only has 1 status register for both ports, so the bit
positions for the status bits of port a and port b are different.  To
  avoid needing to know which channel the interrupt handler is working on,
  shift the status bits for port a into the port b bit positions, and always
  check the port b status bits.  This fixes using port b, which I neglected
  to test before.
- Remember to update the channel's tty structure from the passed in termios
  in the param routine.
- Minor style.
2003-01-02 19:04:35 +00:00
Jake Burkholder
75db2b5e27 Add a driver for the Zilog 8530 dual uart found in Ultra 1s and Ultra 2s.
With a 1 byte transmit fifo, 3 byte receive fifo, and wierd multiplexed I/O
designed for a Z80 cpu, this chip redefines suckage.

Based on the openbsd and netbsd drivers.  Only really works as a console,
modem support is not complete since I can't test it.
2003-01-01 19:49:30 +00:00