Commit Graph

202 Commits

Author SHA1 Message Date
Jordan K. Hubbard
e84bf57e40 Expunge the stain I left upon this code. My '/' fix was utterly
bogus.  Thanks, Boyd!
1994-10-31 18:00:06 +00:00
Poul-Henning Kamp
0f5a69189b A new Makefile, which is more our kind of makefile.
Based on Martins makefile, made by Rod, briefly tested by me
1994-10-28 22:13:22 +00:00
Poul-Henning Kamp
cacd1ee89f Add netboot to the world of make. 1994-10-28 22:11:50 +00:00
Rodney W. Grimes
a5d34029d5 Removed extra slash between ${DESTDIR} and ${BINDIR}, noticed while working
on Makefile for netboot.
1994-10-28 07:54:13 +00:00
Poul-Henning Kamp
63f7a09266 Urg! the netboot/Makefile is in a miserable state. 1994-10-28 04:56:51 +00:00
Poul-Henning Kamp
1c6a0e235f This concludes the CVS-surgery. This makefile now just points at the subdir's. 1994-10-28 04:46:08 +00:00
Jordan K. Hubbard
dc6e5623e1 Gross hack to make kernel names not starting with '/' start with '/'. 1994-10-26 20:46:05 +00:00
Jordan K. Hubbard
9e8367bd7a Adjust boot message to conform to reality. 1994-10-26 20:22:10 +00:00
Jordan K. Hubbard
73ade464e2 Remove the code for asking for a filesystem floppy. We don't need
it anymore, and neither David nor I can think of a reasonable
mechanism to stick in its place.
1994-10-26 13:46:34 +00:00
Jordan K. Hubbard
aa20f6195d Add RB_CONFIG flag. 1994-10-26 13:18:49 +00:00
Poul-Henning Kamp
758eaab802 Found one of the show-stoppers in netboot... 1994-10-22 16:30:58 +00:00
Poul-Henning Kamp
049c88451b Some cosmetics in printfs mostly. 1994-10-22 04:23:12 +00:00
Poul-Henning Kamp
50edb6dded Martins latest changes. RFC1048 and swap-file should be in the game now.
Submitted by:	Martin Renters.
1994-10-19 20:25:37 +00:00
Poul-Henning Kamp
ac71bc2538 Added the final printf before jumping to the kernel. 1994-10-18 03:44:02 +00:00
Poul-Henning Kamp
232b94fe38 Made '?' do the same thing as help.
Fixed bug in netmask command.
Loads kernel fine.  I'm trying to get locore/autoconf to like the stuff.
1994-10-18 02:46:48 +00:00
Poul-Henning Kamp
4853df5bb0 Netboot TNG. I have seen this compile, I don't know if it works.
I have put it here, because I belive we could share some code among the
various kinds of boot-code, whenever we get the time to look at it.

Submitted by:	Martin Renters
1994-10-17 17:55:31 +00:00
Poul-Henning Kamp
da330b4225 $DESTDIR missing... 1994-10-15 03:59:19 +00:00
Andrey A. Chernov
24c989ac53 Change first CFLAGS+= to CFLAGS= or we got really bad results
especially with -m486 from make.conf
1994-10-07 05:36:01 +00:00
Rodney W. Grimes
9949ebf656 1. BOOTSEG and BOOTSTACK are now set from the Makefile, the boot code has
been relocated to run in the 64k segment at 0x10000 with the stack at
    the top of this segment.  This corrects the problems machines with 512K
    base memory had booting.

2.  startprog routing rewritten to convert the BOOTSEG ss to a KERNELSEG
    ss, this eliminated the last of the >512K memory references.  Additional
    cleanup in here included a better way to copy the arguments to the
    kernel stack.

3.  Elimination of argv and esym cruft saved a few bytes.

4.  Only need to truncate the head.a_entry to a meg boundary once intead
    of every time we used it!  [Saving more bytes].

5.  Addition of version 1 bootinfo structure support.  These boot blocks
    pass the kernel name in to the kernel now.

6.  Removed historical comments about MACH argv stuff, as it is useless now.
1994-10-06 09:41:05 +00:00
Rodney W. Grimes
12fafb2d5a 1. Completely rewritten Makefile that uses bsd.prog.mk more effectively.
2.  Clean up the .S files to use /* */ style comments.

This is a totally cosmetic change, not one byte of the resulting boot
code changes.  But at least it is installed with correct owners and in
the right places, and gets recompiled correctly when things change!
1994-10-02 05:18:26 +00:00
Adam David
f89971dfe7 Better documentation, 1ms calibration, default 5 seconds BOOTWAIT
Reviewed by:	adam
Submitted by:	rgrimes
1994-09-20 22:25:00 +00:00
Adam David
fcf8309d74 Default wait approx 10 seconds for keypress during boot
Added comment about multiplication factor
1994-09-19 19:54:49 +00:00
Steven Wallace
893f3712e5 Put LDDESTDIR before library listing. 1994-09-18 19:10:11 +00:00
Steven Wallace
dfc5d1d4eb Makefile: add ${LDDESTDIR} to linking of boot code so ${DESTDIR}/usr/lib
is used instead of /usr/lib

io.c: add #include <machine/cpufunc.h> as instructed by David Greenman to
avoid inb/outb linking errors.
NOTE:  I just discovered that if GNUC is not used the inline functions will not be expanded from the include file and real inb/outb functions would
be needed.
1994-09-18 07:39:55 +00:00
David Greenman
df9ab3049d Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
Bruce Evans
2c22dd40a2 Conditionalize support for my debugger. This normally saves 304 bytes. 1994-08-30 01:38:04 +00:00
Paul Richards
c4350ddb46 Removed disk type from disklabel lines, not needed for installing
bootblocks.

Reviewed by:
Submitted by:
1994-08-21 18:15:45 +00:00
Paul Richards
b95ed23990 Fixed bootblocks to work with FreeBSD 2.0
1) Fixed up some header locations
2) Replaced list of boot files with /kernel
3) Changed disklabel use in Makefile to conform to 4.4
4) Added size command in Makefile to get close estimate of bootblock
   sizes. Total size of text and data must be below 64K, slightly
   overestimated since a.out header subsequently gets stripped.
5) Various buffer sizes are set to 8192 bytes in sys.c. In 4.4 MAXBSIZE
   is set to 64K which is too big for the bootblocks to deal with.

Submitted by:	Paul Richards
1994-08-21 17:47:26 +00:00
Jordan K. Hubbard
1c28e35f68 Commit a whole cluster of last minute critical (and one cosmetic) fixes
from David Greenman, Bruce Evans and Julian Elischer.

They are:

[vnode pager - David/Bruce]:
  The following patch fixes a problem where some data could be lost in a
delayed-write buffer if the cached buffer was larger than a page. This fix was
provided by Bruce Evans and modified slightly by me.

[st.c - Julian]:
  My fix for "bad request, must be between 0 and 0"

RTFS if you're interested).

[gnu/fpemul - David/Bruce]:
  These changes fix single stepping of emulated FPU instructions.
Previously, the instruction after an emulated instruction was
executed without causing a SIGTRAP ...

The also fix the initial control word being different for the
GPL emulator (it is still wrong for the old emulator) and remove
an unnecessary panic when emulation is not configured (I hope at
least init, sh and reboot will run without floating point.  I
remember only df and mkfs being broken by the lack of FP in 0.0).

[Various fixes described below - Bruce/David]:
sys/i386/boot/boot2.S:
        Yet another attempt to propagate the correct fix for 16 vs
        32-bit mode bugs.  [verified]

sys/i386/i386/db_interface.c:
        Protect against reentering Debugger().

sys/kern/kern_time.c:
        Don't allow 'time.tv_usec == 0' except at clock interrupts.

sys/pcfs/pcfs_fat.c:
        Make it compile without -O.

sys/scsi/sd.c:
        Fix as posted to some freebsd mailing list.
        (changes the order of the assignment of "sectors" because it earlier
          value is needed first -DG)

sys/vm/vm_glue.c:
        Fix stale comments and verbose code.

sys/vm/vm_mmap.c
        Fix off by 1 errors and verbose code.

[From Nate - cosmetic but non-intrusive and useful enough to go in]
sys/i386/isa/isa.c:
Appended you'll find a patch to the NMI error log routine in isa/isa.c.
The below patch just adds some additional information when an NMI occurs
which can help debug the hardware problem.
1994-06-22 05:52:25 +00:00
Jordan K. Hubbard
2e2df8360c Make BOOTWAIT a truly tunable parameter. It was hard-set before. 1994-06-20 04:32:40 +00:00
Adam David
3f9e73d24f Changed delay mechanism to rely more on I/O spinning. If spinning on the
like this is bad news, it will have to be revised.
Shortened some verbose messages for when the kernel is loaded below 640k.
Updated version number.
1994-06-16 03:53:29 +00:00
Jordan K. Hubbard
f4c5931839 From Hellmuth Michaelis, reviewed by Bruce Evans: This enables
the keyboard clock rather than incorrectly disabling it.
1994-06-15 19:09:14 +00:00
Adam David
f675355835 make BOOTWAIT loopcount parameter available for tuning.
This changes nothing unless f.e. -DBOOTWAIT=0 or -DBOOTWAIT=640000 is used
1994-06-15 18:15:17 +00:00
Rodney W. Grimes
f2009cbfdb Touch the $Revision$ string to cause a cvs revision update of the boot
code (ie, should now print Revision 1.13).
1994-06-14 07:31:42 +00:00
Jordan K. Hubbard
ac9326b3cc Be paranoid about setting of %dl register for braindead BIOS's,
initializing it to 0 in the floppy boot case.  This allows my Toshiba
1910 laptop to finally boot, and may help out other machines cursed
with early Phoenix BIOS's as well.
1994-06-13 19:27:52 +00:00
Jordan K. Hubbard
9727866aa8 This should fix up the absolute paths to /usr/mdec - just prepended
${DESTDIR} to all the right places (any reason why not?).
1994-06-02 16:50:56 +00:00
Andrey A. Chernov
03afa5ecd8 Make bootblocks fit into 7168 limit 1994-05-30 05:23:53 +00:00
Andrey A. Chernov
7b5cad487c From Bruce:
*	If there is no 386BSD partition, initialize the label sector with
 *	LABELSECTOR instead of with garbage.
 *	Fixed reading of bad sector table.  It is at the end of the 'c'
 *	partition, which is not always at the end of the disk.
1994-05-16 03:06:00 +00:00
Martin Renters
0eb0343191 Change switch statement to two if statements. This saves 208 bytes in
the object file which is enough to bring the size down to the point
where the bootstrap fits into 15 sectors.
1994-05-01 03:53:29 +00:00
Poul-Henning Kamp
13042d1278 Adding bootoption '-r' which is "use compiled in root". This allows me to
boot from a floppy and have root on wd2 for instance.
1994-04-20 22:06:24 +00:00
Rodney W. Grimes
9ad564373e Bump boot block revision to 1.9 by a dummy edit on disk.c and:
>From: bde@kralizec.zeta.org.au (Bruce Evans)
Subject: cache botch in bootstrap
Date: Sun, 20 Feb 94 18:14:35 +1100
The cache in the bootstrap loader didn't allow for the device changing.

This caused surprisingly little trouble - the cache is only for a single
track (or part of a track), and the first access to a new device is
always for an early sector, so there is no problem unless the last access
to the old device was for an early sector.  I saw the problem on a system
with BSD on wd1 and no label on wd0.  Everything worked if the the device
name wd(1,a) was specified before the default of wd(0,a) was tried, but
when the default was tried, it failed on the first sector because there
was no label, and then the first sector on wd0 was always used instead
of the first sector on wd1, so there was apparently no label on wd1
either.

Bruce
1994-02-22 22:59:40 +00:00
Andreas Schulz
908cd9251b Deleted the private cleandir target. It didn't had a rule for the
obj symlink in it and the normal bsd.prog.mk cleandir target does
already the correct thing.
1993-12-11 20:35:15 +00:00
Andrey A. Chernov
6683327ab0 We don't want shared boot, so -Bstatic added to ld options 1993-11-16 02:02:05 +00:00
Rodney W. Grimes
9518d3aea0 >From Charles Hannum
Change movl %es: -2(reg) to use a subl $2,reg when fixing up the IDT
entries for bdb.  This seems to be the best way to go.

Some day soon #ifdef BDB all of Bruces debugger code.
1993-11-13 04:43:25 +00:00
Rodney W. Grimes
dd05fde699 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 19:17:18 +00:00
Rodney W. Grimes
6de3bf82d0 Dont just mask the Megabyte, we need all the bits below too,
and ELIMITNATE THE 28K BOGOUSITY.
1993-10-15 12:33:03 +00:00
Rodney W. Grimes
64e154d67b Fixed the options hd(1,... to be more accurate (removed word options it
now reads:

printf("use hd(1,a)/386bsd to boot sd0 when wd0 is also installed\n");

I know the person wanted more explination, but there is little room in
the boot blocks for verbose text!
1993-10-11 02:43:42 +00:00
Christoph Robitschko
950d93597c Changed the "Insert filesystem floppy" prompt to give the user a choice in
which drive he wants the root file system (A or B).
1993-10-09 08:31:39 +00:00
Rodney W. Grimes
bb9b7f49b4 Remove the ``loader overlaps bss, kernel must bzero'' printf since that
is so often reported as an error condition when it is not.  We print the
size of things so for those who want to know if this happened they can
figure it out from the size information that is printed.
1993-10-08 20:19:23 +00:00
Rodney W. Grimes
6d36c167f4 Changed header from 386BSD BOOT to FreeBSD BOOT. 1993-07-16 13:06:08 +00:00
Charlie Root
f7710986e2 New boot blocks, from Bruce Evans, and NetBSD fixes. Allows kernel to
be loaded above 1MB.  Same boot code for floppies now.  Speed improvements.
etc etc etc. (I don't have much history on this, but then have been tested)
1993-07-13 18:15:32 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00