The program will be installed as bintrans, uuencode, uudecode,
b64encode, and b64decode and will be responsible for running the coders
according to their historical behavior.
Additionally, bintrans will be able to take a parameter designating
the coder and accept all its options in this form:
bintrans <coder> [options]
and the behavior should be the same as if
<coder> [options]
was invoked.
This has the advantage that adding coders won't require installing them
as binaries.
Move uudecode files to uuencode since the latter is the one that
provides the manual page.
Reviewed by: delphij (previous version)
Differential Revision: https://reviews.freebsd.org/D32943
diff3 with the -e (ed script flag) can generate line deletions, add
support for deletions and add a test case to exercise this behaviour.
This functionality was unearthed through comparison of bsd diff3 and gnu
diff3 output.
Reviewed by: pstef
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34912
Fix a typo, and move a sentence onto a new line in accordance with
mdoc(7) syntax.
While here, also remember to bump .Dd accordingly, as it was missed in
the prior commit.
Reported by: maxim@
Improve discoverability of the functionality by mentioning in the
userland tool manual. Add a SEE ALSO entry to rc.conf(5) where more
details are provided.
Sponsored by: Fudo Security (a.wolk)
Differential Revision: https://reviews.freebsd.org/D30334
Add PS_MODE_NO_KINFO_PROC cmd modifier that indicates that neither
process list should be queried from the kernel, nor list of pids or `-a`
switch provided on the command line to filter the output.
This is intended for use by commands that query information not
neccessary attributed to specific process.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34834
Some of the lists were not displaying correctly. Fix that.
Also, address linters errors.
Fixes: 22054f8891 Report I/O stats from the CAM_IOSCHED_DYNAMIC extension
MFC after: 1 week
This more clearly differentiates system call arguments from integer
registers and return values. On current architectures it has no effect,
but on architectures where pointers are not integers (CHERI) and may
not even share registers (CHERI-MIPS) it is necessiary to differentiate
between system call arguments (syscallarg_t) and integer register values
(register_t).
Obtained from: CheriBSD
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D33780
This register set contains the values of the fsbase and gsbase
registers. Note that these registers can already be controlled
individually via ptrace(2) via MD operations, so the main reason for
adding this is to include these register values in core dumps. In
particular, this will enable looking up the value of TLS variables
from core dumps in gdb.
The value of NT_X86_SEGBASES was chosen to match the value of
NT_386_TLS on Linux. The notes serve similar purposes, but FreeBSD
will never dump a note equivalent to NT_386_TLS (which dumps a single
segment descriptor rather than a pair of addresses) and picking a
currently-unused value in the NT_X86_* range could result in a future
conflict.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D34650
This register set exposes the per-thread TLS register. It matches the
layout used by Linux on arm64. Linux does not implement this note for
32-bit arm.
Reviewed by: andrew, markj
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34595
This includes adding support for NT_ARM_VFP for 32-bit binaries
running under aarch64 kernels both for ptrace(), and coredumps via the
kernel and gcore.
Reviewed by: andrew, markj
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34448
The PID of the logger process is always recorded along with the move from RFC
3164 to RFC 5424.
Indicate the -i flag is a no-op now in logger(1).
Related to a similary change in syslog.3
Reported by: danfe@
Approved by: manpages (0mp)
Fixes: 94eb6c42ab
Differential Revision: https://reviews.freebsd.org/D34578
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
The boot time entry doesn't have a tty specified, so don't check it.
While here, make ttystat handle that case.
Approved by: kevans (src)
Differential Revision: https://reviews.freebsd.org/D34524
If fstat(2) fails the close(2) won't be called, which will leak the
file descriptor.
The idea was borrowed from OpenBSD, where similar patch
was applied for futimens(2).
MFC after: 1 week
Add a elf_putregnote() helper to build the ELF note for a register
set. Once nice result of this approach is that this reuses the
kernel's support for generating 32-bit register sets for 32-bit
processes avoiding the need to duplicate that logic in elf32core.c.
Reviewed by: markj
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34447
Add support for --help and --version to be compatible with gnu diff.
gnu diff --help writes to stdout, do the same to be compatible
Reviewed by: bapt, pstef, debrup, Pau Amma
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34508
script -r is useful for recording time-stamps of when output
happened. With -T, rather than playback the script in real-time
we simply print the time-stamps to show when the output happened.
This is very useful for example, for analyzing boot time activity.
If the fmt provided contains no % characters the default
%n@ %s [%Y-%m-%d %T]
is used, which lends itself to analysis by tools as well as humans.
Sponsored by: Juniper Networks, Inc.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D34511
In b5541f456d when flags were converted to
be boolean, the setting of cflag as an integer was removed, but no
boolean set was added.
This effects the output format of dates, but the context type was set to
D_CONTEXT so other functionality worked.
Reviewed by: bapt
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34481
In commit 6fa5bf0832 the pr(1) related code in diff was moved around,
but some part of the indentation was messed up, and one line was
duplicated. Remove the duplicated line, and fix up the indentation.
Reviewed by: bapt
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34398
This was meant to read `basic`, rather than a duplicate of `f_flag`. It
is largely irrelevant, though, as atf_test_case mostly just makes
sure that the proper functions are defined.
Sponsored by: Klara, Inc.
This enables thread-aware timers which in turn fixes benchmark result
reports.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D34238
Use the start of change when searching for a function rather than the
start of the context. In short functions if this could result in search
for the function name starting from before the function definition.
PR: 262086
Reviewed by: bapt, mckusick, mhorne
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34328
1c231509cf88 ("Validate integers fit in cells") is the only change
missing from our copy.
Reviewed by: manu, imp
Differential Revision: https://reviews.freebsd.org/D34368
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
Report, on a periodic basis, the I/O latencies the CAM I/O scheduler
computes. These times are only for the hardware portion of the I/O as
measured from the time the operation is scheduled with the SIM using
xpt_action() until the SIM reports it has completed with xpt_dine(). Any
time the I/O operation spends in a software queue is no included.
The P50 (median), P90, P99 and P99.9 statistics about the latency of
each of the read, write and trim operations that completed during the
polling interval are reported. If there are fewer than 2, 10, 100 or
1000 operations during the polling interval, no statistic is reported
and a single dash '-' is displayed.
The read, write and trim commands (either on the command line or at run
time) toggle display of these operations. The color command toggles
color (it defaults to on, like gstat). When color is enabled, unknown
statistics are reported in blue, high latency for a statistics is
reported in red, medium in magenta and low in green (as with gstat). The
med= and hi= commands can set these latency thresholds.
Limitations: The entire sysctl space for all the devices is walked for
each polling period. This should be optimized to remember the OIDs and
only do such polling with the xpt generation changes. There is also no
way to filter devices displayed. This command only works on physical
devies that are connected to SCSI, ATA or NVME sims as those are the
only ones that are instrumented in the CAM I/O scheduler (the
CAM_IOSCHED_DYNAMIC option must be in the kernel, and the dynamic
scheduler can't be disabled).
MFC After: 1 month
Relnotes: yes
Sponsored by: Netflix
Reviewed by: pauamma_gundo.com, chs
Differential Revision: https://reviews.freebsd.org/D34259
The result of fstat() was not checked. Furthermore, there was a
redundant check of st.st_size. Fix both.
Reported by: Coverity
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Add per-Session configurable ping (SCSI NOP) and login timeouts.
Remove the torn down, old iSCSI session quickly, when performing a reconnect.
Reviewed By: trasz
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34198
Use strtoll() to parse the argument of the -S option.
FreeBSD has supported 64 bit file offsets for more than 25 years on
all architectures and off_t is a 64 bit integer type for that reason.
While strtol() returns a 64 bit value on 64 LP64 architectures, it
is limit to 32 bit on e.g. i386. The strtoll() function returns a 64
but result on all supported architectures and therefore supports the
possible file lengths and file offsets on 32 bit archtectures.
Reported by: antoine
MFC after: 3 days
With --ignore-file-name-case we need to compare files regardless of
case. We need to propigate both names down to diffit so we can look up
the correct file when the names differ based on case, otherwise we try
to look up the file using the case from the a tree which might not be
discoverable if its case is different in the b tree.
Reviewed by: bapt
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34201
When diffing files and directories, don't follow symbolic links, instead
compare where the links point to.
Reviewed by: bapt
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34203
When searching back for function definitions, consider lines starting
with '+' and '-', this allows us to pick up Objective-C methods as well
as C style function definitions.
Reviewed by: bapt
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34202
elfdump -E on an empty file would complain "Invalid argument" because
it tried to mmap zero bytes. With the -E flag, elfdump should
simply exit non-zero. For tiny files, the code would reference off
the end of the mapped region.
Ensure the file is large enough to contain an ELF header before mapping it.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This could be done better by making each test a separate ATF test case.
This exercise is left for the reader.
Reviewed by: delphij (earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34303
Previously an invocation like
elfctl -e +feature1,feature2 file1 file2
would set both feature flags in file 1 but only feature1 in file2 (due
to the string being modified by strsep()).
Reported by: jrm
Tested by: jrm
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34283
Validate the operation prior to parsing the feature string, so that e.g.
-e 0x1 reports invalid operation '0' rather than invalid feature 'x11'.
Also make it an error rather than a warning, so that it is not repeated
if multiple files are specified.
(Previously an invalid operation resulted in a segfault.)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Our mktemp(1) implementation uses 8-X for a temp file by default.
That's ok, but we should increase the value from 8 to 10 as
many other OS already did.
PR: 261438
Namely:
- main was using two-space indentation
- re-sort local variables
- explicit braces for loop scope
- make flag bit comparison explicit
The first line of this commit message is unfortunately a lie, as it
introduces a minor functional change on non-FreeBSD systems. Namely,
the first branch is now explicitly compared against `0` and the choice
was made to compare it as greater than 0 to avoid issues on other
systems where `argc != 0` on entry isn't guaranteed (negative when
checked there).
Sponsored by: Klara, Inc.
Reserve couters in the tcps struct in preparation
for AccECN, extend the debugging output for TF2
flags, optimize the syncache flags from individual
bits to a codepoint for the specifc ECN handshake.
This is in preparation of AccECN.
No functional chance except for extended debug
output capabilities.
Reviewed By: #transport, rrs
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34161
Libarchive 3.6.0
New features:
PR #1614: tar: new option "--no-read-sparse"
PR #1503: RAR reader: filter support
PR #1585: RAR5 reader: self-extracting archive support
New features (not used in FreeBSD base):
PR #1567: tar: threads support for zstd (#1567)
PR #1518: ZIP reader: zstd decompression support
Security Fixes:
PR #1491, #1492, #1493, CVE-2021-36976:
fix invalid memory access and out of bounds read in RAR5 reader
PR #1566, #1618, CVE-2021-31566:
extended fix for following symlinks when processing the fixup list
Other notable bugfixes and improvements:
PR #1620: tar: respect "--ignore-zeros" in c, r and u modes
PR #1625: reduced size of application binaries
MFC after: 2 weeks
Relnotes: yes
* unit-tests/Makefile: disable opt-debug-x-trace on Linux if there
is any chance we have dash as .SHELL
* meta.c: use a variable to hold command line to be filtered
to avoid any side effects from content of command line.
Merge commit '535c59a6a9214436f5d6643775d29808e4b3408d'
Reported by: Mark Millard on freebsd-current@
Fixes: c763f99d11 ("elfctl: prefix disable flags with "no"")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The current implementation of sysctlbyname() does not support the user
sub-tree. This function exits with a return value of 0, but sets the
passed string buffer to an empty string.
As a result, the whereis program did not use the value of the sysctl
variable "user.cs_path", but only the value of the environment
variable "PATH".
This update makes whereis use the sysctl function with a fixed OID,
which already supports the user sub-tree.
MFC after: 3 days
The inp_gencnt will be used to identify a TCP endpoint by an upcoming
command line tool to set TCP socket options.
Reviewed by: rscheff
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D34137
An empty database is a database which does not contain any filenames.
It should not occur in practice but maybe in the case of an error.
echo | /usr/libexec/locate.mklocatedb > empty.db; locate -d empty.db -S
