When vm_map_remove() is called from vm_swapout_map_deactivate_pages()
due to swapout, PKRU attributes for the removed range must be kept
intact. Provide a variant of pmap_remove(), pmap_map_delete(), to
allow pmap to distinguish between real removes of the UVA mappings
and any other internal removes, e.g. swapout.
For non-amd64, pmap_map_delete() is stubbed by define to pmap_remove().
Reported by: andrew
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D39556
Move the xenisrc structure which needs to be shared between the core Xen
interrupt code and architecture-dependent code into a separate header. A
similar situation exists for the NR_EVENT_CHANNELS constant.
Turn xi_intsrc into a type definition named xi_arch to reflect the new
purpose of being an architectural variable for the interrupt source.
This was originally implemented by Julien Grall, but has been heavily
modified. The core side was renamed "intr-internal.h" and is #include'd
by "arch-intr.h" instead of the other way around. This allows the
architecture to add function definitions which use struct xenisrc.
The original version only moved xi_intsrc into xen_arch_isrc_t. Moving
xi_vector was done by the submitter.
The submitter had also moved xi_activehi and xi_edgetrigger into
xen_arch_isrc_t. Those disappeared with the removal of PVHv1 support.
Copyright note. The current xenisrc structure was introduced at
76acc41fb7 by Justin T. Gibbs. Traces remain, but the strength of
Copyright claims from before 2013 seem pretty weak.
Reviewed by: royger
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>, 2021-03-17 19:09:01
Original implementation: Julien Grall <julien@xen.org>, 2015-10-20 09:14:56
Differential Revision: https://reviews.freebsd.org/D30648
[royger]
- Adjust some line lengths
- Fix comment about NR_EVENT_CHANNELS after movement.
- Use #include instead of symlinks.
This overlaps the purpose of __XEN_INTERFACE_VERSION__. Remove Xen 3.0.2
compatibility. __XEN_INTERFACE_VERSION__ has compatibility to Xen 3.2.8
enabled. As Xen 3.3 was released almost 15 years ago, it seems unlikely
anyone hasn't updated.
Reviewed by: royger
Now that the atomic macros are always genuinely atomic on x86, they can
be used for synchronization with Xen. A single core VM isn't too
unusual, but actual single core hardware is uncommon.
Replace an open-coding of evtchn_clear_port() with the inline.
Substantially inspired by work done by Julien Grall <julien@xen.org>,
2014-01-13 17:40:58.
Reviewed by: royger
MFC after: 1 week
Add a <sys/_pv_entry.h> intended for use in <machine/pmap.h> to
define struct pv_entry, pv_chunk, and related macros and inline
functions.
Note that powerpc does not yet use this as while the mmu_radix pmap
in powerpc uses the new scheme (albeit with fewer PV entries in a
chunk than normal due to an used pv_pmap field in struct pv_entry),
the Book-E pmaps for powerpc use the older style PV entries without
chunks (and thus require the pv_pmap field).
Suggested by: kib
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36685
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
We don't need the 56 bytes at the end of bootinfo, and never had. Don't
copy them from old boot loaders, and don't provide them with new boot
loaders.
Add comments about what versions of FreeBSD 'old' means in various
contexts. Add note that old disk loader (from 1.x/2.x) is doomed to
failure because it doesn't provide metadata that we now require to boot,
and has been since approximately FreeBSD 7.x. Retain all this
information to explain why we have 4 arguments that are always 0, even
though it's ancient history.
This saves 56 bytes in the boot loader.
Sponsored by: Netflix
Reviewed by: phk, rgrimes, kib
Differential Revision: https://reviews.freebsd.org/D36550
Mark the obsolete fields in bootinfo with _was_. Note that the fields
from bi_memdesc_version to the end of the structure never were used in a
release. They were added in April 2010 for i386 EFI booting. The boot
loader set these fields though 2019, but no kernel ever looked at them
and we never supported i386 EFI booting, and likely never will in this
form. They can likely be deleted entirely in the future, but locore.S
needs to change to do that (it also needs to change to drop support for
really old booting scenarios as well, which will eliminate bi_endcommon
too).
All the other fields haven't been used since the 4.x -> 5.x cutover of
the wdc driver to ata.
The bi_bios_dev field is used in the handoff between bootXX and the
loader. The loader uses it to determine what disk it was loaded off of
to detmerine the default root filesystem. It's not used by the i386
kernel anymore to determine anything.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D36544
This applies one of the changes from
5567d6b441 to other architectures
besides arm64.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36263
It does not work with ULE, which is the default scheduler for over a
decade.
Reviewed by: emaste, kib
Differential Revision: https://reviews.freebsd.org/D36094
Some tools (firecraker loader) only check for notes in PT_NOTE program
headers, so make sure the notes added using the ELFNOTE macro end up
in such header.
Output from readelf -Wl for and amd64 kernel after the change:
Elf file type is EXEC (Executable file)
Entry point 0xffffffff8038a000
There are 11 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000040 0xffffffff80200040 0x0000000000200040 0x000268 0x000268 R 0x8
INTERP 0x0002a8 0xffffffff802002a8 0x00000000002002a8 0x00000d 0x00000d R 0x1
[Requesting program interpreter: /red/herring]
LOAD 0x000000 0xffffffff80200000 0x0000000000200000 0x189e28 0x189e28 R 0x200000
LOAD 0x18a000 0xffffffff8038a000 0x000000000038a000 0xe447e8 0xe447e8 R E 0x200000
LOAD 0xfce7f0 0xffffffff811ce7f0 0x00000000011ce7f0 0x6b955c 0x6b955c R 0x200000
LOAD 0x1800000 0xffffffff81a00000 0x0000000001a00000 0x000140 0x000140 RW 0x200000
LOAD 0x1801000 0xffffffff81a01000 0x0000000001a01000 0x1c8480 0x5ff000 RW 0x200000
DYNAMIC 0x1800000 0xffffffff81a00000 0x0000000001a00000 0x000140 0x000140 RW 0x8
GNU_RELRO 0x1800000 0xffffffff81a00000 0x0000000001a00000 0x000140 0x000140 R 0x1
GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0
NOTE 0x1687ae0 0xffffffff81887ae0 0x0000000001887ae0 0x0001c0 0x0001c0 R 0x4
Section to Segment mapping:
Segment Sections...
[...]
10 .note.gnu.build-id .note.Xen
Reported by: cperciva
Fixes: 1a9cdd373a ('xen: add PV/PVH kernel entry point')
Fixes: 93ee134a24 ('Integrate support for xen in to i386 common code.')
Sponsored by: Citrix Systems R&D
Reviewed by: emaste
Differential revision: https://reviews.freebsd.org/D35611
The "call" variable comes from the user in privcmd_ioctl_hypercall().
It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32)
elements. We need to put an upper bound on it to prevent an out of
bounds access.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Obtained from: Linux
Linux commit: 42d8644bd77dd2d747e004e367cb0c895a606f39
Fixes: bf7313e3b7 ("xen: implement the privcmd user-space device")
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
These files no longer depend on the macros required when these checks
were added.
PR: 263102 (exp-run)
Reviewed by: brooks, imp, emaste
Differential Revision: https://reviews.freebsd.org/D34804
All supported compilers (modern versions of GCC and clang) support
this.
PR: 263102 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34802
All supported compilers (modern versions of GCC and clang) support
this.
Many places didn't have an #else so would just silently do the wrong
thing. Ancient versions of icc (the original motivation for this) are
no longer a compiler FreeBSD supports.
PR: 263102 (exp-run)
Reviewed by: brooks, imp
Differential Revision: https://reviews.freebsd.org/D34797
These headers #include <sys/cdefs.h> right after checking if it has
already been #included. The nested #include already existed when the
check for _SYS_CDEFS_H_ was added, so the check shouldn't have been
added in the first place.
PR: 263102 (exp-run)
Reported by: brooks
Reviewed by: brooks, imp, emaste
Differential Revision: https://reviews.freebsd.org/D34796
These headers originate with the Xen project and shouldn't be mixed with
the main portion of the FreeBSD kernel. Notably they shouldn't be the
target of clean-up commits.
Switch to use the headers in sys/contrib/xen.
Reviewed by: royger
Modules no longer call kernel functions for atomic ops, and since the
previous commit, we always use lock prefix.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: jhb, markj
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34153
Atomics have significant other use besides providing in-system
primitives for safe memory updates. They are used for implementing
communication with out of system software or hardware following some
protocols.
For instance, even UP kernel might require a protocol using atomics to
communicate with the software-emulated device on SMP hypervisor. Or
real hardware might need atomic accesses as part of the proper
management protocol.
Another point is that UP configurations on x86 are extinct, so slight
performance hit by unconditionally use proper atomics is not important.
It is compensated by less code clutter, which in fact improves the
UP/i386 lifetime expectations.
Requested by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: Elliott Mitchell, imp, jhb, markj, royger
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34153
Requested by: kib
Reviewed by: brooks, imp, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33886
This matches the recent renaming of struct freebsd4_ucontext.
Reviewed by: brooks, imp, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33880
When a DMA request using bounce pages completes, a swi is triggered to
schedule pending DMA requests using the just-freed bounce pages. For
a long time this bus_dma swi has been tied to a "virtual memory" swi
(swi_vm). However, all of the swi_vm implementations are the same and
consist of checking a flag (busdma_swi_pending) which is always true
and if set calling busdma_swi. I suspect this dates back to the
pre-SMPng days and that the intention was for swi_vm to serve as a
mux. However, in the current scheme there's no need for the mux.
Instead, remove swi_vm and vm_ih. Each bus_dma implementation that
uses bounce pages is responsible for creating its own swi (busdma_ih)
which it now schedules directly. This swi invokes busdma_swi directly
removing the need for busdma_swi_pending.
One consequence is that the swi now works on RISC-V which had previously
failed to invoke busdma_swi from swi_vm.
Reviewed by: imp, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33447
The header exports the following:
- Definition of struct tcb.
- Helpers to get/set the tcb for the current thread.
- TLS_TCB_SIZE (size of TCB)
- TLS_TCB_ALIGN (alignment of TCB)
- TLS_VARIANT_I or TLS_VARIANT_II
- TLS_DTV_OFFSET (bias of pointers in dtv[])
- TLS_TP_OFFSET (bias of "thread pointer" relative to TCB)
Note that TLS_TP_OFFSET does not account for if the unbiased thread
pointer points to the start of the TCB (arm and x86) or the end of the
TCB (MIPS, PowerPC, and RISC-V).
Note also that for amd64, the struct tcb does not include the unused
tcb_spare field included in the current structure in libthr. libthr
does not use this field, and the existing calls in libc and rtld that
allocate a TCB for amd64 assume it is the size of 3 Elf_Addr's (and
thus do not allocate room for tcb_spare).
A <sys/_tls_variant_i.h> header is used by architectures using
Variant I TLS which uses a common struct tcb.
Reviewed by: kib (older version of x86/tls.h), jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33351
After a round of cleanups in late 2020, all definitions are
functionally identical.
This removes a rotted __aligned(8) on arm. It was added in
b7112ead32 and was intended to align the
args member so that 64-bit types (off_t, etc) could be safely read on
armeb compiled with clang. With the removal of armev, this is no
longer needed (armv7 requires that 32-bit aligned reads of 64-bit
values be supported and we enable such support on armv6). As further
evidence this is unnecessary, cleanups to struct syscall_args have
resulted in args being 32-bit aligned on 32-bit systems. The sole
effect is to bloat the struct by 4 bytes.
Reviewed by: kib, jhb, imp
Differential Revision: https://reviews.freebsd.org/D33308
The headers were mostly identical on amd64 and i386.
No functional change intended.
Reviewed by: cperciva, mav, imp, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33205
On this platform, the pcb and FPU save area are allocated from the top
of each kernel stack, so they should be excluded from the calculation of
the total and used stack sizes.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32581
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
It was never implemented on powerpc or riscv and appears to have been
unused since it was added in 1998. No functional change intended.
Reviewed by: kp, glebius, cy
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33093
The minidump code is written assuming that certain global state will not
change, and rightly so, since it executes from a kernel debugger
context. In order to support taking minidumps of a live system, we
should allow copies of relevant global state that is likely to change to
be passed as parameters to the minidumpsys() function.
This patch does the work of parameterizing this function, by adding a
struct minidumpstate argument. For now, this struct allows for copies of
the kernel message buffer, and the bitset that tracks which pages should
be dumped (vm_page_dump). Follow-up changes will actually make use of
these arguments.
Notably, dump_avail[] does not need a snapshot, since it is not expected
to change after system initialization.
The existing minidumpsys() definitions are renamed, and a thin MI
wrapper is added to kern_dump.c, which handles the construction of
the state struct. Thus, calling minidumpsys() remains as simple as
before.
Reviewed by: kib, markj, jhb
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31989
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
Move the common kernel function signatures from machine/reg.h to a new
sys/reg.h. This is in preperation for adding PT_GETREGSET to ptrace(2).
Reviewed by: imp, markj
Sponsored by: DARPA, AFRL (original work)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19830
Add a variant of 'rdtsc()' that performs the ordered version of 'rdtsc'
appropriate for the invoking x86 variant.
Also, expose the 'lfence'-ed and 'mfence'-ed 'rdtsc()' variants needed
by 'rdtsc_ordered()' for general use.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31416
Add a variant of 'rdtscp()' that retains and returns the 'IA32_TSC_AUX'
value read by 'rdtscp'.
Sponsored By: Juniper Networks, Inc.
Sponsored By: Klara, Inc.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D31415
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185